Freezing is a problem that any computer hardware faces. At some point, one of the programs begins to behave incorrectly or conflicts with another program, and as a result, the entire device is inoperative. This is what is called freezing.
iPhone is also prone to this issue and may freeze from time to time. Usually, when the iPhone freezes, it refuses to turn off or restart, which baffles the user. Most often, older models, such as iPhone 4, 4s, 5, 5s and 6, freeze. But sometimes even iPhone 6s and 7 users face freezes.
If you find yourself in such a situation, then this material should help you, here you will learn what to do if your iPhone is frozen.
iPhone frozen and won't turn off or restart
Usually, if the iPhone freezes, users try to turn it off or restart using the standard procedure, namely by long pressing the On / Lock button. Unfortunately, in most cases, when the iPhone freezes this way shutdown does not work. The iPhone continues to run and run frozen applications regardless of how long the user presses the power button.
But, the iPhone has alternative way shutdown, which bypasses the iOS operating system. Thanks to this, this shutdown method works even on tightly frozen devices. The method consists in simultaneously pressing and the On / Off button.
Home and Power Buttons
Buttons "Home" and "Power on" must be pressed simultaneously and held until the frozen iPhone turns off. After turning off, you need to wait a few seconds and make a short single press on the power button. After that, the iPhone will turn on and start operating normally.
It should be noted that the Home + Power key combination is also responsible for taking a screenshot. But, to get a screenshot on these keys, you need to press literally for 1 second, if you hold the keys longer, then the protection against freezing will work and the iPhone will reboot.
If you have an iPhone X or more new modelthen you need to use.
iPhone freezes when turned on
Pressing the Home + Power buttons at the same time turns the device off and on in any situation. but this procedure does not guarantee that the iPhone will not freeze again during the startup process.
If your iPhone freezes even before the device is fully loaded, then you can use the recovery mode called " Recovery Mode". It can be used to restore the initial state IPhone and bring it back to life. But, it should be borne in mind that this procedure is equivalent to a reset to factory settings and leads to the deletion of all user data.
To enter recovery mode Mode on the iPhone and perform the recovery, you need to do the following:
- Turn off your iPhone and wait a couple of minutes for all programs to finish their work. If the iPhone won't turn off in a standard way, then you can resort to the combination "Home + Power on" described above.
- Then you need to press the "Home" button and without releasing it, connect the iPhone to the computer via the Lightning cable.
- After connecting, continue to hold the Home button until the iPhone appears iTunes logo and a picture of the cable.
- Now you need to release the Home button and start iTunes on your computer.
- AT iTunes you need to go to the iPhone settings and click on the "Restore iPhone" button.
Restore iPhone button
Thus, you can solve the problem with the iPhone freezing during startup, but, as already mentioned, for this you will need to donate all user files. You can read more about Recovery Mode in our article.
Also on Apple devices there is a so-called dFU mode or Device Firmware Update. If recovery mode does not help, then you can try and try recovery again.
Is an iPhone or iPad glitching, an iPhone or iPad slows down, an iPhone or iPad freezes? We've put together 13 tips to fix these issues!
There are mixed user reviews that iOS update has slowed down some iPhones and iPads, or that tasks such as opening and interacting with apps are slower after installation new iOS... If the iPhone or iPad began to slow down, glitch and freeze after installing iOS, then our tips on how to speed up your iPhone and iPad will help you.
By the way, many of the tips that help speed up your device and get rid of freezes and glitches can also have a positive effect on battery life, so if you're having problems with the longevity of your iPhone or iPad, you can also use these tips.
Here we go over a lot of tips that can help speed up your device. Beyond the first two tips for installing updates software, you can skip them if you have already updated your device.
1: Install all iOS software and app updates
To update your iPhone or iPad to new version iOS (such as iOS 11.0.2, iOS 11.1, etc.)
- Open the app "Settings" then "General"\u003e "Software update" and select "Download and install any update" on iOS
To get app updates:
- Open the application " App Store"And go to the" Updates "tab and install all available application updates.
2: Does iPhone, iPad glitch, and iPhone, iPad slows down after the update?
If you've just updated your iPhone or iPad to latest version iOS, and the device still slows down, lags and freezes? You can wait for your iOS device to re-index everything: Spotlight, Siri, Photos, and other background tasks. This can cause the device to run slowly due to increased background activity.
It's best to wait a few days, leave the device plugged in and let it do all the system background tasks. After a night or two, the phone will usually behave normally again and performance will get better, and this often fixes fast battery drain issues as well.
3: Disable background iOS updates
Background Refresh allows apps to refresh in background... This is good for multitasking and performance, but it can also degrade system performance. Disabling this is easy and most users won't notice the difference.
- Open "Settings" and go to "General"\u003e "Background app update"\u003e "OFF"
The iPhone, iPad is buggy and the iPhone, iPad slows down
4: Disable Siri & Siri Look Up App
You can often speed up the pace of your device, as well as the speed of the Notifications screen, by turning off siri functions Suggestions and Siri Lookup.
- Open "Settings" and go to "Siri and Search" "Suggestions in search" to the "OFF" position and "Suggestions to Look Up" to the "OFF" position.
5: Force restart the device
Sometimes, force restarting the device can help improve performance, especially if some strange process works in the background, or some application loads the device heavily and your iPhone or iPad slows down because of this.
For most iPhone devices and iPad simultaneously hold the POWER BUTTON and HOME BUTTON until you see the Apple logo appear on the screen.
To reload new iPhone X, 8, 7 quickly press and release the volume up button. Then do the same for the volume down button. Finally, hold the side button for about 10 seconds until the screen turns black and hold it until you see the Apple logo.
Here's an example of the iPhone 8, which uses the same buttons for forced reboot:
Then just wait for the device to boot up again.
6: use a simple wallpaper
Using a simple wallpaper created from a small image size can sometimes speed up your work. The idea behind using a simple wallpaper is that it requires less memory and system resources, which can help speed up your Home screen. iOS devices.
- Open Settings and go to Wallpaper\u003e Wallpaper\u003e Choose a boring wallpaper that has one color or a very small file size.
The iPhone, iPad is buggy, and the iPhone, iPad is slowing down.
The home screen can look a little more boring when the image is simple background image (or not, depending on your taste), but it can also speed up your device a bit. Give it a try, you can use the plain tiny gray image wallpaper below if you like, or find your own.
7: Disable Parallax UI Effects and Reduce Motion
iOS uses various visual effectswhich look mind blowing but require more system resources for painting and rendering. Disabling these visual effects user interface systems can improve performance, or at least improve performance, by disabling animations.
- Open Settings and go to General\u003e Accessibility\u003e Reduce Motion and enable.
The iPhone, iPad is buggy, and the iPhone, iPad is slowing down.
* In the Reduce Motion settings, you can also turn off the Message Effects for Autoplay, as these animations in the Messages app can also feel a little sluggish at times.
When you turn on Reduce Motion, the effect of opening and closing the metering and zooming apps is replaced with a simple thin fading animation.
8: Reducing transparency of the iOS system
Transparency and blur effects are scattered all over iOS, from the dock, to the control center, to notification bars, and more. They look nice, but these blur effects can use up system resources and sometimes start to glitch or slow down your iPhone. Disabling them can help the device improve performance:
- Open Settings and go to General\u003e Accessibility\u003e Increase Contrast\u003e Decrease Transparency to ON.
Using the Increase Contrast option may seem a little confusing, but as a result, the Control Center should work faster.
"," type ":" inline "," skip_delay ":" 8 "," time ":" 0.5 "), (" source ":" "," type ":" inline "," skip_delay ":" 8 " , "time": "0.99")] "\u003e
How to extend the time autonomous work iOS on iPhone and iPad
"," type ":" inline "," skip_delay ":" 8 "," time ":" 0.5 "), (" source ":" "," type ":" inline "," skip_delay ":" 8 " , "time": "0.99")] "\u003e
Lesson number 30. IPhone Power Saving Mode
"," type ":" inline "," skip_delay ":" 8 "," time ":" 0.5 "), (" source ":" "," type ":" inline "," skip_delay ":" 8 " , "time": "0.99")] "\u003e
How to Extend iPhone Battery Life
"," type ":" inline "," skip_delay ":" 8 "," time ":" 0.5 "), (" source ":" "," type ":" inline "," skip_delay ":" 8 " , "time": "0.99")] "\u003e
iPhone runs out of battery quickly. What to do?
"," type ":" inline "," skip_delay ":" 8 "," time ":" 0.5 "), (" source ":" "," type ":" inline "," skip_delay ":" 8 " , "time": "0.99")] "\u003e
10 Ways to Get Rid of Fast iPhone Draining
9: Location and background settings for iPhone and iPad
One thing I do from time to time, no matter what device or iOS version I use, configure which apps have access to my location and update in the background. If you have a lot of applications installed and they are constantly updating in the background, it can slow down and battery discharge.
You can change which apps have access to update the background app by following these steps:
- Run attachment« Settings" and press " General».
- Select " Background app update».
- You can turn off the feature entirely, or you can individually choose which apps can update data in the background.
You can customize which apps can use your location and when by following these steps:
- Run attachment« Settings"And tap" Confidentiality».
- Select " Location services».
- Now choose which apps can access your location.
The iPhone, iPad is buggy, and the iPhone, iPad is slowing down.
Apps that constantly check your location can cause your iPhone to lag. This is why it's important to keep track of how often apps access your location.
I recommend that you enable most applications. This means you can get weather information for your location, get updated transit through Maps without entering locations, and more. At the same time, it will prevent the extra performance of these apps from being used in the background without your knowledge.
10: Free up enough storage space on your iPhone or iPad
Having enough free space is ideal for optimal operation of your iPad or iPhone. Generally speaking, it's a good idea to have 10% or more free space... Therefore, if you have a device with a capacity of 32 GB, it is advisable to have 3 GB of free space or more. This means that there is enough free space for caches, updating applications and iOS itself, and performing other system functions.
- Open "Settings" and go to "General"\u003e then select "Storage" (now labeled as storage for iPhone or iPad). Make sure there is enough space, if not, free it up.
The iPhone, iPad is buggy, and the iPhone, iPad is slowing down.
Once you're in the Manage Storage section of your device, you can either follow the recommendation to free up storage space, delete unused or old apps, or take any other action necessary to free up storage on your iPhone or iPad.
This is important, and if your iPhone or iPad is completely full or has very little space, performance will suffer, plus you won't be able to install updates for apps or system software, and other issues may arise, such as data mysteriously deleted from the device, not the music is saved. Always try to have available space for storage.
11: Reset iOS system settings
If none of the above methods solved the problem: the iPhone or iPad slows down, the iPhone or iPad is buggy, the iPhone or iPad is frozen, then reset.
Resetting an iOS device may speed things up for some users. Keep in mind that if you reset your device, you will need to make changes to all of your custom settings again, like many of those described earlier in this article.
- Open Settings and go to General\u003e Reset\u003e Reset All Settings.
The iPhone, iPad is buggy, and the iPhone, iPad is slowing down.
12: iOS backup and restore
A common troubleshooting method is backup devices in iTunes or iCloud, and then iOS recovery... This can sometimes fix obscure performance issues, and if you contact Apple to troubleshoot your device, they will most likely want you to do this.
You can back up to iTunes or iCloud, or both. Always back up before starting the restore process.
Using iTunes with a device connected to your computer, you then select "Restore" device. Or you can select "Recover" directly on the device itself and choose iCloud or iTunes to recover.
13: Recover using iTunes, not iCloud
ICloud updates are convenient, but slow. And sometimes broken pieces of data can be carried over from update to update. I definitely had a better restore using iTunes. Because iTunes extracts and decompresses files on your computer, unlike your iPhone or iPad, you get a clean version of iOS.
You can restore your device with reboot, this is an application that makes it easy to restore your iPhone or iPad. Download
And millions of users immediately rushed to update their iPhones, iPads and iPods. And after 20-30 minutes, angry reviews rained down on Apple, like:
- The system is slowing down!
- My iPhone has become a snail.
- It's impossible to work with iOS 10!
- Everything is buggy and slows down, I'm rolling back!
- Apple - No.% "No.% !!
Don't jump to conclusions. Your iPhone can perform much better than it did with iOS 10 on board. Faster, smoother, more productive. Just heed the following tips:
1. Installed? Wait a couple of hours
Immediately after installing iOS 10, the device heats up terribly, the interface is drawn with obvious delays, bugs and slowdowns are everywhere. Calm down! As strange as it sounds, it should be so.
Again installed operating system it takes time to create a cache of photos, search for Spotlight, optimize applications. And this process can take from a couple of minutes to several hours. It all depends solely on how much information is stored on your iOS device.
How to speed up: After installing iOS 10, connect your device to charger and leave it alone for a few hours. It is best to leave this process overnight. In the morning you will find that your iPhone just started flying, and there will be no trace of glitches and bugs.
2. Turn on "Reduce Motion"
The parallax effect and the beautiful animation that accompanies the icons on the desktop when you look at the screen from different angles, tilting the device - all this has some effect on the performance of not the most recent iOS devices.
How to speed up: Open up Settings -\u003e General -\u003e Accessibility -\u003e Reduce Motion and turn on the corresponding slider opposite the item Reduced movement.
3. Disable visual effects and transparency
Another decoration of the system is transparency, which also negatively affects the performance of a gadget with iOS 10 on board. Windows, icons and menu items look beautiful, but you can live without this beauty, preferring the speed of work.
How to speed up: Open up Settings -\u003e General -\u003e Accessibility -\u003e Increase Contrast and feel free to include two sliders opposite the items Decrease contrast and Darkening colors.
4. Disable Content Updates
Even when your iPhone rests peacefully in your pants pocket or bag, installed applications continue to actively interact with the internet connection. The data is updated, additional information is loaded and the smartphone is in a constantly loaded state.
How to speed up: Open up Settings -\u003e General -\u003e Content Update and turn off the slider opposite the item Content update.
5. Free up memory
iOS 10 (and any operating system) cannot work stably and quickly if your device has only a few megabytes of free space.
How to speed up: Delete photos, videos, a couple of boring applications or games, do not forget to empty the folder Recently deleted from application A photo... Do your best to have at least 1 GB of free memory on your iOS device.
6. Express acceleration
There is an option that will speed up your smartphone in just a few seconds. We wrote about this method in detail, but just in case we will repeat ourselves.
How to speed up: Unlock your device. Press the Power key and hold until the shutdown menu appears (slider with the inscription Turn off). Press the Home key and release Power. Hold Home until the desktop reopens. The boost was activated successfully.
At least once, but every owner of an iPhone or any other iOS device faced software glitches when the device stops responding to touching the screen and pressing mechanical control buttons (Home and Power). What to do if iPhone is frozen and refuses to obey elementary commands? In today's instruction, we will introduce you, dear readers, with 3 ways how to restart iPhone from any state.
For starters, let's say your iPhone is operating normally, it responds correctly to touches on the touch screen, obediently responds to commands using the Home and Power buttons, and you need to restart your iPhone in normal mode.
How to restart iPhone normally?
- Press and hold the iPhone shutdown button (aka "Power") until the appearance of large buttons " Turn off"And" Cancel ";
- Touch iPhone screen on the left side of the red button “ Turn off”(Slide to power off) and, without lifting your finger from the screen surface, slide the button to its right border. This gesture is called “ Swipe"(From the English Swipe - to carry out without tearing). iPhone will start to turn off.
- Wait until the screen of the device completely goes out and briefly press the "Power" button... The Apple logo appears on the display and the iPhone starts downloading normally.
Force restart iPhone
The forced reboot method will differ depending on the model.
All iPhones prior to iPhone 7
For iPhone 6, 6 plus, 6s, 6s plus, 5, 5S, 5C, SE, 4S and all previously released, you need to press the Home and Power buttons:
- Press and hold the "Home" and "Power" buttons at the same time throughout 10 Seconds (about). IPhone display goes out completely.
- Release both buttons. If the Apple logo does not appear on the screen after that, briefly press the power button... iPhone will start downloading normally.
iPhone 7 and later
On iPhones that were released after the iPhone 7, the Home button was made touch-sensitive. If operating system iOS is frozen, then pressing the sensor will not work. Another way of emergency reboot was made for them:
- Press the power button and volume down button at the same time. Do not release and hold for about 6 seconds.
- The iPhone will reboot. The Apple logo appears. Then it will boot as usual.
The way to force restart iPhone or iPad when a software glitch occurs. We advise you to use this procedure in case of emergency, and if you can get by with the remaining 2 methods, use them. Leave this one as a last resort.
The third and final method restart iPhone effective only when normal work iOS device, when the touch screen responds to touch and the device performs the necessary operations, but the shutdown button is damaged or does not work.
How to restart iPhone without a button?
To govern mobile devices from Apple and iPhone in particular, can and without mechanical control buttons... The creators took into account, although high, but still limited resource mechanical controls, and in case your iPhone's touchscreen has outlived the control buttons that the “mechanic” was responsible for using gestures.
In order to activate full iPhone touch control, you must enable the " Assistive touch". This function allows you to flexibly configure control of the device using gestures and completely replaces mechanical control buttons.
Activating Assistive Touch
- Go to Settings -> The main -> Universal access;
- Scroll all the way to the bottom of the Accessibility Settings page and in the Interaction section select item " Assistive touch«;
- In the next settings window, move the activation slider opposite “ Assistive touch"To position" Included"(Turns green). A semi-transparent button appears on the iPhone screen.
- Touch the iPhone touch screen within this button (this gesture is called "Tap"). A window with the available Assistive Touch options will appear on the screen.
Video tutorial "How to enable Assistive Touch in iOS"
Turn off iPhone using Assistive Touch
In this manual, we will get acquainted with the method of turning off an iOS device without using the “Power” button using the Assistive Touch function.
- « Tap" on icon menu Assistive touch;
- In the menu of this function “ tap"By the icon" Apparatus", and then long tap (touch the screen of the device and do not lift your finger) by " Screen lock"Wait for the buttons" Turn off"And" Cancel ";
- And then everything is as with turning off iPhone in normal mode, do “ swipe right"By the button" Turn off". The device will start to turn off;
- how then it turn on if the off button is not working? Just connect iPhone to computer with USB cable and it will turn on normally.
Video instruction "How to restart iPhone without a button"
A few words in conclusion
The methods described above allow you to completely turn off or restart the iPhone or iPad from any state, in normal mode, if the iPhone is frozen or the power button is faulty. The last way with the use of the Assistive Touch function, it allows the maximum flexibility to customize the control of an iOS device using gestures, with one "BUT", touchpad must be in good working order and the device must function normally; Assistive Touch does not work on a frozen iPhone.
If you, dear users, have any questions or difficulties in managing or adjusting the touch iPhone control or iPad, please contact us in the comments and we will try to help you as quickly as possible. Are you using Assistive Touch And How?
Often, users of modern smartphones from Apple are interested in what to do if the sensor on the iPhone is buggy, for example, after replacing the glass. And all because all the work mobile devices from touch screens directly related to the high sensitivity of the screen to pressing, with which you can use the functions of the gadget, view menus, work with documents. If the sensor stops working, even after replacing the display, you lose the opportunity to fully realize your needs, which are often very necessary to fulfill.
Why does the sensor stop working on a smartphone
The touchscreen on the iPhone can start to fail completely spontaneously, for example, after replacing the display or if the smartphone has fallen. As a rule, the reasons due to which on a particular phone model does not respond touch screen on touch or the touchscreen is intermittently triggered due to mechanical damage to the device. To protect the display from shock, you can attach protective glass or replace the film on it. Without additional protection, for example, when falling, the touchscreen on the iPhone sometimes starts to freeze or completely breaks down.
Also, the reasons why the iPhone screen glitches and the touchscreen stops working are the following:
- ingress of liquid into the body of the device
- crash after replacing software
- non-compliance with the manufacturer's requirements when replacing the display glass
If you are sure that the iPhone has not fallen or spilled water on it, but it does not respond to touches, does not turn on, or does not respond correctly to pressing, then most likely there is software malfunctionwhich you can fix yourself.
How does a display module malfunction manifest
There are several signs indicating that the sensor is buggy or the touchscreen is not working on the iPhone. These include the following:
- lack of sensor response to touches in a certain part of the screen
- ignoring any taps on the display, which indicates that the sensor is lagging
- arbitrary operation of the gadget after it has fallen or after replacing the glass (applications and documents open by themselves)
Cleaning the smartphone screen
Starting to restore the performance of a sensor that does not work well, hangs and slows down after replacing the glass or after you dropped it, you must first clean the display of your smartphone. You will not harm the phone in any way, but you will improve the connection, and perhaps the sensor will stop freezing and slowing down. This method will help if the display does not turn on, does not respond to touch, or the sensor periodically fails.
If the sensor does not work well when the buttons are pressed, and it often freezes, slows down, wipe the screen with a soft, lint-free cloth moistened with glass cleaner different models phone.
How to restart your phone
If the touchscreen on the iPhone after replacing the display or for some other reason periodically freezes or the lower part of the sensor does not work, then the problem can be fixed by restarting the phone. When the sensor on the iPhone is buggy, do the following:
- hold down the power button and the Home key together, hold the keys for 20 seconds
- wait until the device restarts and the Apple logo appears on the display
- check if the sensor works by touching any icon
This instruction will become one of the possible wayshow to restart your smartphone if the touchscreen does not work or some part of the iPhone sensor stops functioning
Check accessories if the screen is frozen or won't turn on
There are situations when it is the accessories that interfere with the normal operation of the display module and because of them the screen of an iPhone of any model becomes dull and buggy when buttons are pressed on it. For example, if the original protective film was glued to the glass incorrectly, the sensor stops working at all, or only dulls at the bottom.
In addition, today you can buy any bumper on the iPhone, but not all of them can boast of high quality. If the bumper you purchased overlaps the top or bottom of the display, it will obstruct normal functioning its module, and the screen will start to glitch. To understand if this is the reason for the non-responsive touchscreen, you need to remove the back cover and test the touchscreen on the phone. If the problem is in the bumper, then the sensor, which sometimes freezes, will then be restored. If, after removing the accessory, the screen on the iPhone does not stop dulling and glitching, then you need to continue looking for the cause of the display module malfunction.
What to do if the display module freezes or does not work well
If rebooting the device did not work and, as before, the sensor is buggy, or it does not respond to pressing in any way, then most likely the problem lies not in a software failure, but in a malfunction of the internal components of the phone and you will have to replace the failed part. In this case, you should contact a professional technician who will diagnose the screen, determine the sensor malfunction and repair the phone.
If the keys periodically glitch and the sensor lags after you dropped the phone, or the display does not respond to pressing, the specialist will first determine the cause of the malfunction and then eliminate it. After diagnostics, the wizard will tell you about the state of the smartphone, which was dropped or flooded with water, why the sensor is frozen or does not work well. If required, he will carry out a quality replacement of the display screen.
When do you need to change the display?
Screen iPhone any the model is regularly exposed to various influences, due to which the touch screen may not respond to touch. Also, scratches on the display can lead to the fact that the lower part of the sensor does not work. The solution to the problem when the entire screen or part of the iPhone sensor stops working is to replace the glass or install a new module.
You will have to change the display when the sensor is buggy or displays information incorrectly in the following cases.
