There are times when the IPhone hangs on the apple image, most likely it happened due to the fact that the command "Delete content and settings" was executed incorrectly or a jailbreak was performed. Remember, don't try to fix it yourself. file system or even hack IOS - since the consequences can be irreversible.
The reasons for such a malfunction may still be:
- In rare cases, hardware failure;
- Problematic firmware;
- When jailbreak tweaks and devices are incompatible.
All these errors will not be fixed by repairing the IPhone, but by completely flashing the phone. If you are sure that it is necessary to repair the IPhone, since there are physical malfunctions, you should not do it yourself, and it is better to immediately contact the service center. You can solve the problem with program crashes yourself.
Restore IPhone via iTunes
If a download is spinning on the IPhone display and it does not turn on, you can try switching the phone to dFU mode and at iTunes help restore, for this you need:
- Connect your phone to your home PC;
- Press and hold the Power and Home keys for 10 seconds;
- Release Power but hold Home.
The screen will still be off, but the device will show up in iTunes. Then hold Shift on the keyboard and click "Restore". The firmware does not have to be done as suggested by iTunes, but you can pre-download required version on computer.
Tweaks not compatible with the device
Here you need to check the latest downloaded tweaks for compatibility with the phone. It is incompatibility that is the most common cause of a malfunction.
You need to reboot the device after each installed tweak, this will help prevent the iPhone from freezing in the future.
To check tweaks, you need to boot your device in Safe Mode:
- Turn off the phone;
- Hold down the key where the volume increases and turn it on;
- Wait for the iOS to load.
If the download is successful, then the problem is that the last downloaded tweak is not working properly. You need to go to Cydia and remove the problem tweak, while access to all applications will be preserved.
on failure
In order to determine exactly when the download stops, you need to turn it off, and after a couple of minutes turn on the device again, and then try to make a call. If the call passed, then the problem lies at the last stage of the download. Recovery can be done with file manager iFunBox or iTools utility. If the call does not go through, then you need to use iTunes to restore.
Trying to fix hardware failures yourself is a bad idea. Repair The iPhone is better in specialized service centers, because this technique does not tolerate negligent and unprofessional treatment.
If the iPhone is frozen on an apple and does not even think to start further. Try to start, just in case, restart the device by making a hard reset, If this option does not work. In this situation, the only solution to this problem would be to flash the iPhone, while note that all your data on the iPhone will be irrevocably deleted (if there is backup copy, nothing terrible).
To start the iPhone recovery process, you need to enter the mode DFU.
Proshifka aifona - fig. 1
fig. 1
We connect the iPhone to the aytyuns, after connecting the smartphone (for sure), simultaneously hold down and hold the HOME and POWeR buttons for 10 seconds as in Fig. 1, then immediately release power button continuing to hold hOmE button until the computer detects it, Then click the "restore" button in the aytyunse and wait until the program completes the installation.
We were happy to help you and will be very grateful if you share this useful material with a link on the networks and leave a review. Thank you in advance!
Does not work?Please describe the problem with your iPhone in the comments or call us at. For the convenience of our clients, our company works in the city of Almaty, which can save you a lot of time.
How could this happen?
Such jambs with the program can occur if unsuccessful iOS update.8 by wi-fi and is considered an error, a crash in the operating system. According to Apple, an ongoing update fixes these issues with the iPhone.
The most common cases are independent installations Jailbreak on iPhone with crooked hands without carefully reading the installation instructions to the end.
The fact that your iPhone is constantly weighing on an apple may mean something else that .. what theoo ... practice has shown us that in such cases you just can't get off with a program. And the problem may be due to a malfunction of the hardware itself.
If neither reset nor firmware helps your iPhone, you shouldn't take it apart right away. Before you gut your iPhone in the hope of fixing the problems yourself, know that not carefully opening the iPhone can damage important elements and the board of the parts, and multiply the problems and get to the grandmother.
If you remember, know or saw that some thread of liquid got into the iPhone, the wall was hit or accidentally crushed (dropped, broken), smoked like a beggar. Then all the more it is not worth torturing and finishing him. Better bring it to us at. Here you will pass all the analyzes, explanatory and find out the result of the examination. What the hell is it and how to cure your iPhone. Diagnostics is free! At least from our screening tests and find out the result for free.
Many of us are well aware of how to deal with problems that can arise with the long-familiar iPhone. However, Apple has changed a lot with the iPhone 8, iPhone 8 Plus, and iPhone X.
In this article, we will try to figure out what to do if your iPhone 8, iPhone 8 Plus or iPhone X do not respond to actions, do not turn on at all, freeze on an apple.
The device does not respond at all
If your iPhone 8, iPhone 8 Plus, or iPhone X does not respond at all to your actions, it just freezes and shows a static picture or just dark screen, restart needed.
In this case, you should not lose any data that you worked on, if the corresponding software has an autosave function. And the iPhone will definitely not be reset.
Device does not start after restart
If after the procedure forced reboot your iPhone 8, iPhone 8 Plus, or iPhone X still won't turn on, he could run out... Yes, you didn't even notice it.
In this case, connect the device to a wired charger (this is preferable) or put it on a wireless station and leave it for an hour. In a couple of minutes this will appear:
If the charging screen does not appear for an hour, or if a screen for connecting to a power source is displayed, do not despair. Just check the connector, uSB cable and power adapter.
First, make sure 100% that all connectors are securely connected and not damaged or clogged with dirt. Try a different cable or power adapter. If it's dull - to the service.
Please note that in winter the battery can run out very quickly due to low temperatures. Moreover, it may not give required powerand the device will simply turn off.
Of course, everything written above is also true for the iPhone 7 and below. No nuances other than lack of support wireless charging in this case, simply not.
Smartphone freezes on apple while loading
It happens that the iPhone seems to start, but its loading stops at the Apple logo - an apple. But this mostly happens on test firmware and other risky manipulations.
First. Connect your device to your computer and open iTunes.
Second. When the device is connected, perform a forced reboot.
- On iPhone 8, 8 Plus, X, press and release the volume up button, then press and release the volume down button. And at the end, press and hold the power button up to the Apple logo.
- If you're using an iPhone 7 or 7 Plus, press and hold the Power button and Volume Down button for ten seconds or longer until the Apple logo.
- If you're using an iPhone 6s, 6s Plus, or older, press and hold the Home and Power buttons at the same time for ten seconds or longer until the Apple logo.
Never release the buttons described above when the apple appears - the Apple logo. Keep holding them until the recovery screen starts. Let go and exhale.
Third. Select "Update" when prompted to perform a repair or update. iTunes will try to reinstall iOS without erasing your personal data.
ITunes will first download a fresh copy of iOS for the device. You just have to wait until the procedure is completed or try to perform it again if something goes wrong.
What to do if all else fails
As a result, after all the procedures described above, you should see the familiar lock screen of your iPhone 8, iPhone 8 Plus, iPhone X or an older iPhone that you are so used to:
However, on rare occasions you may not succeed. Yes, this happens with the iPhone too. And there are plenty of reasons for this outcome:
- There is something wrong with the displayif it remains dark but you hear alerts and feel vibration.
- There is something wrong with the displayif it stays black but you hear sound signalwhen you connect iPhone to charging.
- There is something wrong with the tachif the display works, but does not respond to your gentle and not strong pressing.
- What's wrong with the buttonsif you can't force restart the device or even just press them to do so.
- Something just isn't rightif the device is frozen on the screen with an apple and is not recognized by iTunes.
As a result, you need to go to the service. But his choice is a topic for a separate material. Better, of course, in the official one, but it is long and expensive. It can be unofficial, but it's dangerous for the iPhone.
With each new version software for iPhone, security is also increased operating system, and the stability of its work. The process of updating the operating system of the iPhone is simple - you can install the latest version directly on the phone itself through the built-in update system via Wi-Fi. Despite this, many owners apple smartphones face a problem when after updating iOS device is not downloading ( iPhone hung on an apple). Why this is happening, how you can solve the problem and how to avoid it - in this article we will take a closer look at this issue.
The iPhone hung on the apple. Why it happens?
If your iPhone hung on an apple and does not turn on after an iOS update, the reasons for this may be a software error or system failureand hardware malfunction of the phone. To talk about possible options actions in this or that case, consider them in more detail.
IPhone won't turn on due to software glitch
If you tried to update your iPhone, but it stuck on the apple and does not turn on, most likely this is a consequence system error... In this case, iOS cannot boot, and the iPhone reboots cyclically to the apple logo. Most often this happens due to the incorrect completion of the update installation. If there was little on the phone free space, or there was not enough battery power when installing the update, the likelihood of such an outcome will be much higher.
IPhone won't turn on due to hardware failure
Symptoms and external manifestations can be difficult to distinguish between an iPhone malfunction caused by software bugs when updating iOS, from the consequences of hardware problems with the phone. The fact is that during the update process, almost all key components of the iPhone are checked. If something does not work, then when the firmware is updated, the phone may either not turn on at all, or freeze on an eternal reboot.
If the iPhone hangs on an apple and turns on only when connected to a charger and immediately turns off after disconnecting, the reason for this is most often a battery malfunction. Also, in such cases, it is not uncommon for problems with the operation of the power circuit: damage to the battery connector on the board, incorrect operation of the charge microcircuit or breaks in the power supply of the board components.
From more complex cases, one can single out problems with the power supply or the general performance of the microcircuit. nAND memory, due to which the iPhone cannot boot and reboots cyclically. Well, and, probably, the most serious thing that can be - "blade" of the device's central processor. Percentage of successful repairs with a guarantee stable work in such cases, unfortunately, it is extremely small.
The iPhone hung on the apple. What to do?
The most correct decision, if your iPhone is frozen on an apple and does not turn on, will be a timely appeal to the service center. This can be especially relevant and critical in cases where the information in the device's memory is extremely important. If the problem is of a programmatic nature, our specialists service center will be able to solve it quickly and efficiently. If, nevertheless, the problem is more serious, after carrying out technical diagnostics, we will be able to pinpoint its causes and offer a solution.
Are you facing a problem and your iPhone is frozen on an apple? Have questions? Welcome to the comments below. Tell us (preferably - in as much detail as possible) about the malfunction of your phone, indicate accurate model and the firmware version of the device and get a preliminary consultation from the service center employees absolutely free!
WiFi does not work in iPad Air - Solution Problems in the operation of a wireless WiFi connection on iPad in most cases arise as a consequence mechanical damage... Less often, you can find options for ..
Replacing the earpiece speaker in iPhone X - instructions
Replacement conversational dynamics in iPhone X - iPhone instruction The X is Apple's new flagship that truly stands out from all previous smartphone models. Besides the improved performance ..
Why does the iPhone only work on charging? Repair instructions
Why does the iPhone only work on charging? Repair instructions Despite the high quality of all iPhone components, power problems may appear during prolonged use of the gadget. & Nb ..
Why Apple Pay isn't working on iPhone 7 and how to fix the problem?
Why does not it work Apple Pay on iPhone 7 and how to fix the problem? With Apple Pay technology, users can keep all their bank cards in in electronic format... Standard Apple Wal ..
Self-replacement instructions battery on iPhone 6 Battery change is a routine procedure that every owner of a modern device performs. Battery replacement iPhone 6 for ..
Self-replacement of the case iPhone 6 Hardly at least one owner of an iPhone has never thought of changing the case on their device. If you still have the courage and decide to do it yourself, I will help you ..
IPhone 6 Display Replacement Always turn off the power completely before performing iPhone 6 display replacement. It is necessary to press the well-known button until the power indicator slider appears.
How to disassemble an iPhone 5s with your own hands Apple announced the release of the new iPhone 5s on September 10, 2013. The disassembly of the iphone 5s is similar to the previous models and requires a hole.
After trying to turn it on, your iPhone stuck on an apple and no longer responds? This indicates that a serious error has occurred in the operation of the system, which the device cannot solve on its own. Be prepared to have to restore your IPhone. Below are all possible methods to help you effectively solve your problem.
The "eternal reboot" of the iPhone occurs due to the failure of the standard algorithm of actions that are required to turn on the smartphone. The smartphone may not be able to access the central processor, check the memory and configure the internal components.
There are only three reasons that provoke the "eternal reboot" of the phone:
- IOS updates, restoring and transferring data from computer to IPhone and other actions during which a third-party device gains access to the functions of the phone's cores. Perhaps the error was caused by the "defenders" programs, faulty cable or USB port;
A hard reboot helps 99% of the time. However, user data is not saved. After restarting, all your personal files will be deleted. We advise you not to backup your data, because its contents may contain utilities and options that caused the freeze.
To do Hard reset, hold down the Home button and the Power button until the Apple icon disappears. Next, animated gears will appear on the screen, which indicate the start of the system rollback process.
Hard Reset will end in 5-10 minutes. Then the iPhone will turn on. You will need to spend basic setting phone again (sign in to your Apple ID, set up a fingerprint scanner, etc.).
If hard reboot did not bring any results, it is necessary to start the DFU mode - updating the standard firmware of the phone. This option allows you to enable automatic diagnostics and troubleshooting of microprocessor problems.
As a result, DFU will roll back peripheral software, without which the hardware components cannot start up properly.
Connect your IPhone to personal computer and open the iTunes for PC utility. Make sure your phone is turned off. Press and hold the Power and Home buttons for 8 seconds. Then release the Power button, but still hold Home until the iTunes has found an iPhone in Recovery Mode message appears in the main iTunes window.
Then, in the program on the PC, press the OK button to start the process of rolling back the microprocessor firmware. Do not disconnect your computer or iPhone from your PC until the very end of DFU recovery. This can lead to a complete inoperability of the phone.
Possibly after a recent phone repair the cables motherboard were loosely connected. Turn off your phone and open the back cover. Then check the connection of all loops shown in the figure. If necessary, disconnect and reconnect the component using a spudger or plastic spatula.
