How does the repair work:
- 1
We diagnose the delivered
device you or our courier. - 2 We make repairs and also give a guarantee for newly installed parts. On average, repairs take 20-30 minutes.
- 3 Get a working device yourself or call our courier.
The causes of malfunction are most often:
- OS errors
- The presence of marriage
- Falling or hitting a gadget
The first case, in which the iPhone 4s hangs on the iTunes strap, suggests that the operating system is not working correctly, or that the OS is not completely installed using a computer. Most often this is after an iOS update. But, also, this problem can occur if the phone did not pass the growth. Then a jailbreak is done on it, which allows you to use a Russian sim card and helps to make other changes to the iPhone 4s.
Hanging on the iPhone 5s lanyard - a marriage?
If we talk about a factory marriage, then most often the speaker or antenna suffers from the iPhone 5c. And the user either does not hear the interlocutor, or cannot access the Internet. But, our service is also being contacted with a complaint that the iPhone has just been purchased, but after a week it starts to fail. Then it hangs on a lace.
What to do if the iPhone stuck on the lanyard?
First of all, we recommend returning your phone under warranty. But if this is not possible, then we do a flashing and other manupulations already in our service. After that, the gadget most often comes to life. We also solve other problems along the way. For example, we can change the speaker on the iPhone 5s, which in no way interferes with the process of flashing the device.
If the iPhone hangs on the lace after a fall, then there was damage to the motherboard or processor. In this situation, the defect will not be obvious, but when updating to a new version of the firmware, the iPhone 5s shows a string on the screen, or a requirement to connect it to Aityuns.
To solve the problem, you must come to our workshop. Where they know what to do with your situation. After diagnostics in our workshop, they will tell you exactly why the iPhone 5c hangs on a strap, and, if necessary, will restore the software. In this case, after flashing the phone should work again. If you notice that before the iPhone freezes, the Internet stopped working for you, then you may need to replace the antenna on the iPhone.
We serve the employees of these companies
After unsuccessful flashing on the device screen, you may encounter such a problem as the iTunes icon and USB cable. If you updated via iTunes, then you will see in it the number of the error that occurred when updating the firmware. Following are some of the kinds of errors that can appear in iTunes.
Decoding iTunes errors when the phone shows "connect to iTunes"
Error 1
Causes :
You are trying to downgrade the firmware to an unsupported device or iTunes.
Decision :
Make sure you are using the firmware for your phone and use iTunes corresponding to the firmware you want to upgrade to.
Error 2
Causes :
The problem with ASR, as a rule, arises with custom firmwares with hacking and unlock in which bad ASR Patch is used (Sn0wBreeze under 1.7 had this problem)
Decision:
Please use a different firmware.
Error 3
Causes :
The malfunction most likely lies in the modem part.
Decision:
It is necessary to carry out diagnostics at the Service Center
Error 4
Causes :
iTunes Cannot Connect to Apple Service Servers
Decision:
Most likely you need to check the connection to the Apple servers. It is also worth paying attention to the hosts file in the WIndows folder and the opportunity to comment out the “#” lines with different iP-addresses.
Error 5.6
Causes :
The firmware cannot be installed either because the boot logos are damaged, or because the device is entered into the wrong service mode
Decision:
A very rare error, you can avoid it by re-entering the device into DFU mode and downloading the firmware via iTunes by clicking the Restore iPhone / iPad button.
Error 8
Causes :
The difference in the firmware for the device, also the error itself rarely "pops up", in most cases error 3194 appears
Decision:
Try substituting a different version of the firmware, since most likely the previous firmware is no longer signed
Error 9
Causes:
Kernel Panic is a kernel error during flashing, an analogue of BSOD (Blue Screen of Death) on Windows.
Decision:
It also occurs with custom firmware. It is worth rebuilding them or using others.
Error 10
Causes:
The firmware does not have LLB (Low Level Bootloader), without it the system cannot be booted.
Decision:
Do not use custom firmware without upgrading the modem from older versions of PWNage Tools and Sn0wBreeze.
Error 11
Causes:
The firmware is missing BBFW.
Decision:
Use another one, or add the missing file to IPSW through the archiver.
Error 13
Causes :
The problem of the USB cable or connector on the device itself, also the error appears when you try to install the beta version of ios
Decision:
Check for damage in the lower dock of your gadget, as well as on the cable itself with which you are trying to flash the device. If you are trying to upgrade to a beta version, try to use a different one, or if possible use OS X to install such firmware.
Error 14
Causes:
Problem with firmware after jailbreak, try to recover with custom firmware If it does not help, the problem is in USB.
Decision:
Recovery from custom firmware, or change of port / computer
Error 17
Causes:
You are trying to "Update" a custom with another custom.
Decision:
It is necessary to “Recover”, preferably from DFU or Recovery.
Error 20
Causes:
The device was initially put into Recovery Mode and was unable to transition to DFU
Decision:
It is necessary to put the device into DFU mode from the very beginning and put the device back on the update
Error 23
Causes:
Usually a hardware error. It is also expressed by the fact that the phone cannot find out the IMEI or MAC address.
Decision:
Carry to a service center, or if you are satisfied with an iPod without WiFi and BlueTooth, then it will be stitched using iTunes 9.0.2 and this instruction
Error 26
Causes:
NOR failed version checking.
Decision:
Change the firmware file.
Error 28
Causes:
There is a problem with the device's memory.
Error 27 and 29
Causes:
Cyclical error when restoring in iTunes 8-9.1
Decision:
Use the latest iTunes or any version of iTunes for Mac.
Error 31
Causes:
The device cannot exit DFU mode
Decision:
Most likely there is a hardware problem with the device itself, for this it is necessary to diagnose the gadget
Error 37
Causes:
LLB in the firmware has been replaced with an analogue from another device model.
Decision:
Rebuild by custom or use another.
Error 39, 40 and 10054
Causes:
Problem with access to activation and signing servers. Also, with error 40, there may be a problem with Nand memory, processor or RAM.
Decision:
Try disabling your firewall and antivirus and flashing it again. If the error persists, then it is necessary to carry the device to the Service Center for diagnostics, since most likely the problem is in the hardware.
Error 10 **
Causes:
Occurs when downgrade / upgrade to a baseband different from what the firmware has. This does not mean that the restore failed - it just tells you that the phone firmware does not match the baseband.
Decision:
Use The Frimeware Umbrella to turn on the phone after an error (Kick Device Out of Recovery).
Errors 6 and 10
Causes:
It occurs due to a problem with your firmware - usually if you are using an unsuitable boot / recovery logo.
On firmware 2.0, error # 6 may indicate that you are not in DFU
Decision:
Upgrade to a new custom firmware and use the correct boot / recovery logo or even the standard ones.
Error 1600 and 1611
Causes:
Custom firmware is not designed for DFU.
Decision:
Use Recovery Mode
Errors 16 **
Causes:
The system for verifying the signatures of the firmware files is not disabled.
Decision:
You need to jailbreak before installing with custom, if you used Spirit, you must also disable manual signature verification. To do this, install the Spirit2PWN package from Cydia.
JailbreakME.com is not suitable for installing custom firmware.
If you install custom iOS 4.1 and higher from PWNage Tools, then you need PWNed DFU - we do it through RedSn0w or PWNage Tools
Error 1619
Causes:
iTunes cannot be infused with your iPhone. it's too old to bother with your device
Decision:
Update iTunes.
Error 1644
Causes:
Aborting the firmware reading session.
Decision:
Do not touch the firmware file while iTunes is restoring your phone, make sure that kheubt programs do not manipulate this file.
Error 2005
Causes:
Error in iPhone responses. Usually caused by mechanical damage.
Decision:
Check the dock connector.
Error 3004
Causes:
Internet connection required for flashing
Decision:
Make sure your computer is connected to the Internet and nothing prevents iTunes from using that connection.
Errors 14 **
Causes:
Damaged firmware file. Or USB port.
Decision:
- Download the firmware file from another source.
- Replace wire, port, computer.
Errors 20 **
Causes:
Data cable or usb port failure
Decision:
Change the Data cable, USB ports, if possible, try another computer.
Errors 3014
Causes:
Too long response time from Apple activation server
Decision:
You need to restart your computer / laptop and also “restart” your Internet connection
Error (-39)
Causes:
iTunes cannot download purchased music from the iTunes Store
Decision:
1) Install iTunes version 9 or higher.
2) If you are using Web Accelerators, turn them off and restart your computer.
Error (-3221)
Causes:
iTunes cannot contact the iTunes Store due to file blocking.
Decision:
Change iTunes and iTunesHelper access and permissions to unblock their ability to send data with a remote server.
Error (-50)
Causes:
The error occurs after the sent request timed out.
It can be caused by:
-Browardman
-Fairwall
-AD filters
-Antivirus
Decision:
If you have any of the programs listed above, set them up so iTunes can contact itunes.apple.com and ax.itunes.apple.com
If an error occurs while downloading video content.
Delete the video download cache, it is in
Mac:
~ / Music / iTunes / iTunes Music / Downloads
Note: The tilde (~) refers to your Home directory.
Windows Vista:
\\ Users \\ username \\ Music \\ iTunes \\ iTunes Music \\ Downloads \\
Windows XP and 2000:
\\ Documents and Settings \\ username \\ My Documents \\ My Music \\ iTunes \\ iTunes Music \\ Downloads \\
Find the file of the downloaded video, its extension will be TEMP (* .tmp)
Start downloading from the beginning.
Error 9808
Causes:
Error registering to iTunes Store
Decision:
Start - Control Panel - Internet Options - Advanced and check the items SSL 3.0 and TLS 1.0.
After restarting the computer
Error 39
Causes:
An error occurred while trying to sync photos.
Decision:
Try to create a new album in iphoto.
Keep the album blank and sync the iphone with this new album only.
This will delete any photos that you synced to the iphone.
Now put some photos in a new album and sync iphone.
If syncing went well, add some more photos and sync iphone.
Keep going through this process until you get the same error.
If you get the same error, then you know that one or more photos in the last batch are causing the error.
Error 13001
Causes:
Broken iTunes library file
Decision:
Create a new itunes library file - by deleting it and then opening itunes and it will recreate it iTunes Library.itl
Errors 13014, 13136, 13213
Causes:
ITunes software hole
Decision:
Solution 1
Make sure you have the latest version of iTunes installed on your computer.
Solution 2
Close and reopen iTunes. If the problem persists, restart your computer.
Errors -1
Causes:
Error in the modem part of the device
Decision:
It is necessary to diagnose the device in the Service Center, since this error cannot be solved using the repair software.
Map of Apple Service on Sumskaya 82:
If you have any questions. You can contact us - Online-consultant or by calling the phone below. We will be glad to help you.
Our address:
Kharkiv, Sumska street 82
Schedule:
Monday - Saturday from 10:00 to 20:00
Sunday - from 11:00 to 17:00
Friends, occurrences USB cable and iTunes icon on the screen of iPhones, iPads and iPods are quite common. In general, it is generally accepted that if a cord and an icon in the form of the iTunes program logo appear on the black display of one of these devices, then this means that Recovery Mode is running. But not everyone knows that cable and iTunes, besides Recovery Mode, can mean Recovery Loop, which is different from Recovery Mode.
In order for you to be able to make an accurate diagnosis, to determine the mode in which your iPhone (or other device) is located, displaying the USB cable and iTunes, we will write down the results of our studies of the acquired as a result of the operation of these mobile Apple devices. And maybe our meager knowledge will help at least someone solve their problem and restore the phone or tablet to work.
Recovery Mode - Normal
The iPhone or iPad is entered into the normal recovery mode using simple steps, the sequence of these steps is described here - "". To exit the normal Recovery Mode, we simply left the iPhone for a while, it rebooted itself and exited the recovery mode. To immediately exit the recovery mode (so as not to wait), we simply force it. It turns out that from the usual recovery mode, unlike others, it is quite easy to exit with a reboot.
Recovery Loop Mode - Compliant
There are cases that after a forced reboot, which is used to exit the normal recovery mode, the iPhone still continues to load a black screen, on which we see the cord and iTunes again and again. This situation means that the iPhone has entered the so-called Recovery Loop mode. A phone or tablet is very often driven into this mode by iTunes. Getting into the Recovery Loop can happen for various reasons, for example, as a result of or restoring iOS firmware. A recovery loop can occur as a result of a software, hardware or household failure (for example, the cable was accidentally pulled out), once we ourselves, when we tried to downgrade the iOS firmware from 7 to 6.
Why did we add the word “Obedient” in the subheading? Yes, because you can still get out of the obedient recovery loop and return the iPhone to a working state without losing information, for this we used, some users with TinyUmbrella had difficulties, and we found a more convenient way to exit Recovery Loop using the program. There are other programs to exit the loop - iReb and RecBoot.
Recovery loop mode - not obedient
If your iPhone or iPad falls into a naughty Recovery Loop, then, as a rule, not only a forced restart is powerless, but the programs redsn0w, iReb, TinyUmbrella and RecBoot also cannot get the iPhone out of the recovery loop. As a result of using the programs above, the iPhone continues to display the USB cable and iTunes logo after reboot. In this case, we did not succeed in avoiding the loss of information stored in the iPhone, but it's good if earlier you too.
If you have caught a naughty recovery loop, then all that remains is to connect your iPhone to iTuens and try to flash it. Sometimes it is impossible to flash the phone in this mode, then they try to flash it again. As a result, the iPhone's firmware erases all the information we made earlier. It happens that after flashing the iPhone or iPad, they are asked to enter someone's Apple ID and password, but this is a completely different story.
Any owner of an Apple gadget has repeatedly come across a situation where the iphone 5 freezes. What does this mean? One of two things - the screen is frozen and does not want to turn off or the device does not respond to button presses. But these problems are quite solvable, if your iPhone is frozen, you just need to restart it. And this can be done in several ways, which will be discussed below.
Consider one of the common situations when iphone 6 freezes. This can happen with other versions of Apple smartphones, such as iPhone 4, iPhone 5s, iPhone 6, iPhone 6s, iPhone 7 and others. As experience shows, the user of any iPhone model at least once faced a problem when the device slows down and for a long time it is impossible to restore its operation.
So, if you do not know what to do if the iPhone freezes and slows down, and at the same time it cannot be turned off, try performing a forced reboot. This procedure can be done in any state of the iPhone - and when the iphone is frozen during the update, and in a situation if the iphone is frozen during a factory reset.
A forced reboot is performed as follows:
- The first step is to simultaneously press the "Home" and "Power" buttons and hold down for 8-12 seconds. The display of the gadget should go out completely.
- After that, remove the press, and the logo should appear on the screen. If this did not happen, you need to make a quick short press on the power button, and the reboot in normal mode will begin.
The method described above allows you to adjust the system operation in extremely difficult situations, for example, when the iphone 4 freezes during recovery, as well as if the iPhone freezes during the update, etc. Moreover, repeated presses on the buttons do not give a result, as well as touching the screen - the iPhone slows down and continues to hang , and without responding to user actions, it works by itself.
In general, a forced reboot is a last resort when nothing else helps. But if you have other, less difficult problems on the iPhone, it is better to apply the methods that are given below.
How to restart an iPhone if the buttons don't work
According to the reviews of users of "apple" gadgets, it often happens that the iPhone was able to freeze, but they do not know how to turn off the device, since the buttons do not respond to pressing, ie. just don't work. This happens with phone models iphone 5s, iphone 6s, iphone 7 and others. But most often, of course, with outdated versions. For example, when the iphone 4s freezes, but the device is not turned off, the display works - a very common situation.
So what if the model of the four s is buggy and does not respond to button presses? There is only one way out - using the Assistive Touch function.
To enable this feature, you need:
- Go to the main settings of the phone in the section of universal access.
- Find the item on physiology and motor skills (it is at the very bottom of the menu) and click on "Assistive Touch".
- On the screen of the gadget version five, 5 ES, iphone 6s, iphone 7 or another model with which you are working, a special translucent color button will appear.
- Touch this button and the Assistive Touch menu will appear on the display.
That's it, the function is on, you can proceed to the second and most important stage of actions to restart the gadget in a situation if it freezes and the buttons do not function.
Any modern iOS device, be it the fifth or sixth version - for example, the iphone 6s, can be turned off not mechanically, but using touch technologies. This is done as follows:
- By clicking on the "Assistive Touch" icon on the screen of the device.
- Click on the icon with the inscription "Device", and then carry out a long press on the section "Screen lock". The display will show buttons to turn off and cancel this action.
- Further, the user's actions are intuitive to everyone - you need to touch the "Disable" icon and the procedure will be carried out automatically.
- To turn on the device, you need to connect it to a PC or laptop via a USB cable, and it will work normally.
Thus, the device was rebooted in 2 stages - through a sequential shutdown - turn on. This is one of the most commonly used and fairly easy ways to restore the performance of the iphone 6s and other models of the "apple" smartphone, if it wants to hang.
What to do if an iPhone is frozen on a lace
Such a problem, when an iTunes icon and a USB cable appear on the display of an Apple mobile gadget, is quite common. Usually, users consider this situation to be starting the recovery mode. But this is not always the case.
In fact, with this manifestation, iTunes programs in interaction with an iPhone can mean one of 3:
- recovery procedure in normal mode;
- recovery loop mode - docile;
- recovery loop mode is naughty.
What does each of the above concepts mean? In the first situation - when the procedure takes place normally - the device will do everything by itself. You just need to leave the gadget for a while, and the system will restart itself. If the user urgently needs to cancel this mode, let him restart the device forcibly.
But it so happens that the iPhone does not react in any way during a forced reboot, and continues to display the iTunes logo on the screen. This is how the second situation arises - the obedient recovery loop mode. I must say that the reason for the appearance of this mode is often iTunes software crashes. In particular, this often happens during the process of updating the operating system or firmware of the gadget. A loop can also appear as a result of a simple domestic misunderstanding, when the cable is accidentally disconnected in the course of some action.
Why was this regime called “obedient”? Because it is reversible. The device can be returned to work by saving all the data that was originally in its memory. To this end, the user must download and apply one of the many programs designed specifically for this:
- RecBoot;
- TinyUmbrella;
- iReb and many others.
And finally, the third mode is naughty, also arising from problems with iTunes. This situation is more complicated because here the user will not be helped either by the special programs mentioned earlier, or by the forced system reboot procedure. Whatever the owner of the smartphone does, the cord and the logo of the aytyuns remain on the screen. Of course, all the data stored on the gadget was irretrievably lost. It's good if the user has foreseen the situation in advance and made a backup. If not, all that remains is to regret the lost data.
Having caught such a loop, it remains only to try to flash the device. This procedure is difficult, and the master does not always succeed the first time, but it is quite possible. Often the standard firmware scheme does not help and you have to use a special program - DFU. The information previously stored on the gadget is irrevocably deleted, and all data is restored from the backup, if any.
Many iPhone 7 users will see a USB cable and iTunes icon on the screen after updating to iOS 10 / iOS 11, usually in this case, it is believed that your device has already entered recovery mode. After a series of "Unknown Errors", it came to a black screen with a cord and an aytyuns icon, the service said that there was a problem with the board. Or your iPhone 7 had a problem with a black display, where a cord and an icon in the form of the iTunes program logo appeared, after a forced restart, the phone does not react to anything at all and does not turn on or charge. This article is written, What to do iPhone 7 stuck on iTunes lanyard after iOS 10 / iOS 11 update?
Free way to recover with Tenorshare ReiBoot
The free program will solve your problems, iPhone 7 is in recovery mode and after iOS 10 / iOS 11 update freezes on the Connect to iTunes icon, Tenorshare ReiBoot will help you exit recovery mode, and your device will reboot itself after a few minutes.
First download and host Tenorshare ReiBoot on your computer. Connect iPhone / iPad / iPod touch to your computer using USB cables. Then Tenorshare ReiBoot will recognize your device in recovery mode, click the "Exit Recovery Mode" button. Wait a bit and the device will reboot safely. Do not disconnect the device in this process.
Solve stuck on iTunes logo in iTunes
The way to get rid of black cable and iTunes screen is to restore to iTunes.But it will erase all content, so make a backup before using it.
- Download and install aytyuns on your computer.
- Open iTunes, connect your device to your PC with a USB cable.
- Wait for the image of the iPhone with the cable connected to appear on the screen.
- Press the "Restore" button in the aytyuns. the device will start working again as usual.
Fix operating system with Tenorshare ReiBoot
The usual way is to force restart, but after the forced restart, which is used to exit the normal recovery mode, the iPhone 7 still continues to load a black screen, on which we see the cord and iTunes again and again. This situation means that the iPhone 7 has entered the so-called Recovery Loop mode. Getting into the Recovery Loop can happen for various reasons, for example, as a result of errors after updating or restoring iOS 10 / iOS 11. Then you need to fix the operating system.
How does the repair work:
- 1
We diagnose the delivered
device you or our courier. - 2 We make repairs and also give a guarantee for newly installed parts. On average, repairs take 20-30 minutes.
- 3 Get a working device yourself or call our courier.
However, there is a slightly different from "Recovery Mode" or recovery mode, "Loop" mode or in other words "Recovery Loop". How exactly to diagnose and what to do to restore the iPhone 6 Plus to work?
The normal recovery boot can be stopped with a forced reboot, or just wait until the process is complete. But if the iPhone 6 Plus freezes, it means that it switched to Recovery Loop.
Loopback mode means that the Apple device is frozen and cannot return to a working state on its own, or during diagnostics, a system error or hardware failure has occurred that cannot be resolved by a forced reboot.
Moreover, the system may freeze after a forced reboot.
Why iPhone stuck on iTunes lanyard
The reasons that lead to the "loop":
- Attempting to downgrade the modem version via iTunes;
- Interrupting the download of the iPhone 6 Plus system update;
- An attempt to downgrade the firmware via a computer;
How to restore work if the iPhone is frozen?
Getting out of the Recovery Loop is much more difficult. You can try to boot the device using special applications. For these purposes, TinyUmbrella and RedSn0w programs are most often used.
There are two types of "noose": obedient and naughty.
In the first case, it is difficult to restore the iPhone 6 Plus to work without losing data, but it is possible. To do this, use the TinyUmbrella program, there are other programs, but to work with this software, in any case, you need at least basic knowledge and understanding of the processes that will occur.
We serve the employees of these companies
We do a reflashing if it hangs on the iPhone 6 strap, high quality!
If the iPhone 6 Plus froze and fell into the naughty Recovery Loop, then any attempts to rehabilitate the phone are already powerless.
The only way out is to reflash the device.
In the case when it is not possible to install a new version of iOS on the iPhone via iTunes in the usual mode, and the phone continues to "hang", a special emergency DFU mode is introduced. In this case, you lose all the information that you stored on your smartphone, but you can recreate it after flashing from a backup copy.
The iPhone hangs on a lanyard iTunes
If there is no way to do it yourself, then only qualified craftsmen should be entrusted with the firmware of the 6 Plus gadget. Everyone should understand why experience and professionalism are important here. We have been working in this area since 2009, the accumulated experience allows our specialists to quickly and efficiently restore the system operation, change the speaker, and other failed parts and return your phone to a fully working condition.
The army of smartphone fans is increasing day by day, the more devices are used every day, the more problems arise with them. In today's article, we will analyze the situation when an iPhone (of any model) asks to connect to itunes and does not turn on.
The problem is frequent and well known to servicemen, not fixing it takes about half an hour of work and 1500-2000 rubles of money. In order not to waste the family budget, we will try to turn on the iPhone on our own, at home.
Causes
There are many reasons, it is difficult to organize them, but several popular ones can be distinguished:
- The firmware flies - it is because of this that the iPhone 5, 6, 7 models does not turn on, the aytyuns and the lace are on. We will consider how to reflash the device in the next section.
- A hardware error, as a result of which some system files were deleted or corrupted, again, a flashing will help. Masters call it "iPhone hung on a string."
- The error can occur after falling onto a hard surface
- Water ingress into the device.
What to do if the iPhone seems to be loading, but does not turn on, gives out a "string" and asks to connect to itunes? Consider the options for solving the problem below.
Decision
To turn on the broken iPhone, we follow the instructions clearly. If you don't understand something, at the end of the article there will be a video instruction on how to turn on an iPhone of any model through the official itunes software if it does not turn on. The instruction is applicable to all models of Apple smartphones, 4, 5, 5S, 6, 6 plus, 7, 7 plus.
- Download a program called iTunes from the official Apple website (link).
- Install aytyuns and download the firmware for your iPhone model.
- Turn off the iPhone and connect it to the computer using a standard cable from the kit (you can replace it with a good copy).
- For 5 seconds, hold down the "HOME" and "POWER" buttons together, wait about 10 seconds.
- After 10 seconds, release "POWER" (aka blocking), but leave "HOME" pressed!
- After a while Aityuns will display a message about the DFU mode, now we are starting to restore the firmware.
- In the iTunes program, we find the "Restore" button and hold down "Shift", press it.
- In the window that appears, select the previously downloaded file with the extension .ipsw, confirm the choice.
- The firmware restoration process has started, now we are waiting for completion.
It must be remembered that when flashing, all data will be erased. If you do not have a backup copy or you have stored all the photos on a dead device, without using iCloud, it will not be realistic to restore them. In this case, you need to immediately contact the authorized service centers, they will help, but they will ask for good money for the work.
Possible difficulties
If errors occurred during the flashing process, for example, a warning with error number 9 appears, then the situation is much worse. Most likely, an important microcircuit inside the phone is damaged, it is unlikely that you can fix it yourself. In this case, you will have to contact the repairmen, since it is not realistic to re-solder the microcircuit without special equipment. Although our craftsmen have learned to do this too, I will leave a video about soldering the microcircuit with my own hands, suddenly someone will come in handy.
It happens that other types of problems arise when the iPhone does not turn on, a daisy is spinning on the screen and nothing happens. Most likely, you will have to reflash the device, but first we will try to do a hard reboot, it will suddenly help. Do not be alarmed, there is nothing complicated and scary, you will not even lose data, as if you still decide to reflash your iPhone.
Instructions on how to make a hard reboot, if the iPhone does not turn on, the aytyuns icon and cable appear on the screen
- We hold down the lock button and the "home" button
- We are waiting for about 5-10 seconds
- There is a chance the phone glitches will disappear
- If it does not help, look at the previous section and repeat everything according to the instructions.
conclusions
After several attempts, the smartphone never came to life? In this case, the best solution would be to contact experienced specialists, although it will not be free of charge, you will protect yourself from the risk of completely "bricking up" an expensive device. What to do when the iPhone 5 s does not turn on and in an ultimatum form requires you to connect to aytyuns, you now know, carefully read and watch the video, in 90% of cases this will solve the problem.
Video instruction
What to do when you find your iPhone 5S is hanging? Why Is the iPhone 5S hanging on a lanyard? DIY instruction and repair Will it help in such a situation or will you still have to contact the service center?
Instructions: In such a difficult problem, when the iPhone is frozen, the lanyard is on the screen, there may be several options for breakdowns and, accordingly, you will have to eliminate them in different ways:
- A software failure of the communicator in question has occurred. New licensed firmware required;
- Baseband processor broke down due to voltage surges or strong shocks of the device;
- The power control IC is damaged. It will have to be replaced with an original analogue;
- Due to corrosion or other consequences of wetting, mechanical stress, the components of the printed circuit board do not function correctly - it is necessary to carry out preliminary computer diagnostics.
Outcome: The first option can be done independently at home without much difficulty, but if you have the 2nd, 3rd or 4th option, then they can be safely eliminated exclusively at the service center.
We offered you 2 troubleshooting options - choose the one that is more comfortable for you.
Repair at Apple Telemama Service Center
Self repair
Our advantages
- We constantly select only original, high quality spare parts.
- Cost. We purchase factory components in bulk, which we then sell to you at a reduced cost.
- Repair time. On average, a standard replacement of displays, speakers, connectors, etc. lasts from 20 minutes. Another 20 minutes is needed to diagnose complex defects in a mobile phone.
- 1 year warranty.
If your mobile phone is broken, malfunctions, we will certainly help you to repair it. It will be quite difficult for you to cope with such a task on your own. Bring your communicators to our Telemama service personally or use a courier service to save your time.
In the proposed SC Telemama, computer diagnostics is done free of charge. After the examination, we discuss the exact cost of further manipulations and proceed to repair the device. Engineers with extensive experience install only factory components for replacement, which is confirmed by a long warranty.
When we finish repairing your iPhone 5S, come to the service yourself, or call a courier for delivery. 1 year warranty will be provided in any case. In the future, both you and your friends will receive a discount on servicing equipment with us, but for this you need to give your order number.
We have been performing high-quality repair of iPhone 5S communicators for many years, in addition, we teach the client to independently repair the devices in question, we sell original components for them. Read about the price of the services and spare parts provided in the price list. You can only carry out preliminary diagnostics in the service center, and at home you already connect the constituent parts.
Regular customers do not need discounts, because they are always served at the lowest prices. New promotions are held quite often, thanks to which the iPhone 5S can really be repaired at cost price and with a long warranty.
