When connected to closed (password-protected) network resources login and password are requested. In order not to enter password constantly, the user ticks the "Remember credentials" checkbox. To remove these passwords (for example, when changing users) you need to go:
Start → Control Panel → User Accounts → Account Administration
You can also get here through " Start → Run", Enter text" control userpasswords2 "and click OK.
Note: « Start → Run"Can be called by hot keys System + R (where System is the button with the Windows logo).
If you need to make sure that the computer does not remember passwords, then you need to go:
Start → Control Panel → Administrative Tools → Local Security Policy → Local Policies → Security Settings → Network Access: do not allow storing passwords or credentials for network check Authentication -\u003e Properties -\u003e Disable / Enable
Solution from Microsoft to reset passwords.
1. Log in to the system administrator.
2. Click Start → Run (System + R), enter regedit or regedt32 , press " OK».
3. In the editor, select the branch HKEY_USERS, but we do not enter it.
4. In the editor menu, select File → Load hive ( File → Load Hive).
5. A file selection dialog box will open. Gotta choose Ntuser.dat at the root of the problem user's profile (Documents and Settings \\ User \\ NTUSER.DAT). After selecting the file, you will need to give the NAME of the loaded registry branch.
6. In the registry editor, go to HKEY_USERS \\ NAME \\ User.
7. We delete the keys.
8. Select the branch HKEY_USERS \\ NAME and click File → Unload Hive (File → Unload Hive).
9. Exit the registry editor.
P.S. Remembering and saving RDP passwords. Sometimes there is a need to disable or enable remembering (saving) passwords for the Windows Remote Desktop. See how to do it.
(Visited 8,531 times, 5 visits today)
As a rule, this question arises after you tried to log into another PC over the network, but received a login / password request. The situation is solved simply and quickly, the main thing is to learn a few elementary commands.
Where does Windows store network passwords?
You can manage passwords in this OS using the "netplwiz" command. To start its execution, go to the "Start" menu and enter "Run" in the search bar, or press R + Win-key. The described method is relevant for Windows 7, in Windows XP you should use the command "control userpasswords2". When the corresponding window with accounts opens, go to the "Advanced" menu and select the "Management" sub-item. This tab is intended for any manipulation of passwords, user accounts, security settings and other actions. Naturally, all operations must be carried out from an account with administrator rights. This way you can easily change any password to a more suitable one. The physical storage for network passwords is the% systemroot% \\ system32 \\ config directory.
Requesting a nonexistent password
It often happens that computers controlled by different versions Windows is difficult to network or connect to from outside. For example, Win 7 may ask Windows XP for a network password that has not been assigned at all (or will not accept the existing passcode). How do I fix this problem? On all machines the following conditions must be met: users must be allowed access over the network by assigning a non-empty password to each; login-pass for authorization is the same on the "client" machine and on the server. If the connection is still not established, go to "Computer Configuration" (Win + R, enter gpedit.msc) -\u003e select "Windows Configuration", then "Security Settings", inside the "Local Policies" item, "Security Settings" again, the "Network Security: Lan Manager check" sub-item, enable the "Send LM and NTLM" line. Also check the correctness following settings:
- in the "Control Panel", the item "All elements" -\u003e "Network and Sharing Center", the sub-item "Advanced settings" disable "Access from password protection» ;
- standard network model for Win 7 should be "Workgroup" (default);
- the guest account is enabled, in the local policy it is also removed from the item "Denial of access to the PC from the network."
If you found out \\ changed the password and did everything as indicated in the article, but did not get access to the machine over the network, you need to study in detail the settings of local access policies on each specific computer.
Instructions
Select User Accounts (for Windows XP) or expand the User Accounts and Family Safety link and go to User Accounts (for Windows Vista).
Try not to add suspicious and unwanted contacts to your list so that you do not have to waste time deleting them in the future. Please read their personal information carefully before sharing your personal information.
In order to configure network equipment, you sometimes need to configure yourself gateways... To disconnect the desired device from the network, you need to turn off the gateway connected to the Internet.
Instructions
Launch an internet browser on the computer that is connected to network equipmentto open the router settings menu. Enter its ip address and press Enter. Then enter the password and username to access the network equipment settings.
If you need to disconnect all network computers completely, then disconnect the connection internet with a router. To do this, go to the Status menu. In it you will find the status of the network connection. Then click on "Disable".
If you need to disconnect certain devices from the network or internet, open the custom advanced options menu. Next, go to the "Routing Table" item. Select the required local port, then delete all routes. This method allows you to reset all static routes. If the DHCP function is active, then access the network internet computers can.
If you are using a router by ASUS, open the menu called "Status", find in it a list of devices that are connected to the router, and a network diagram.
Now you can highlight required computer or laptop and set the parameter to Disable. It is recommended to use this method of disabling the gateway only if computers are connected through network hubs to the router. That is, several PCs are connected to the LAN port of the router.
If one PC for which you need to disable the gateway is connected directly to the LAN port, then you just need to physically break this connection by pulling out the network cable.
If you want to disconnect a specific computer from the network on long term, then enter the MAC address of its network card... To do this, set the MAC addresses to Disable. Reboot your router to apply all settings changes.
As practice shows, many users personal computer face difficulties such as confirming a password when entering the Internet... This is not a serious problem, however, more than half of the users are simply annoyed.
You will need
- - a computer;
- - the Internet.
Instructions
Click on the "Start" menu, then open the "Control Panel" tab. You need to find the shortcut "Network Neighborhood". This directory contains all active connections of your computer, and therefore the settings. You can also get to this menu in another way. Click on the "My Computer" shortcut. You will see a list of all local drives. In the left corner there will be a small menu in which find "Network Connection".
As soon as you entered this menu, you need to find the connection the Interneta that is installed on your computer. To do this, click on the "Show all connections" button. Next, select the desired shortcut. For example, it can be “Beeline”. On your computer, the connection will be named after the company that provides the service to use the Internetand.
Next, click on the shortcut with the right mouse button, and select "Properties". Then go to the "Options" tab. A special menu will appear, which is intended for setting up "dialing". If you are constantly asking for data when connecting, then there is a check mark on the item "Request a name, password, certificate ". You need to disable this item. You can also enable such an item as "Display connection progress". This parameter allows you to see the connection status in real time.
If all properties the Internetand configured, press the "OK" button, and close this menu. Next, restart your computer and try to connect to the Internetat. Now you will not be confirming the data.
Calls, video communication, exchange instant messaging and files with other users, wherever they are. All this provides skype program... To simplify and improve the communication process, several different types of network status are used, which are controlled by the user depending on his needs.
In each article on setting up a router, or in the instructions for changing passwords, I advise you to write down somewhere the password that you set on your home wifi... Or set a password that you will definitely not forget, but at the same time, it must be strong enough. As you can imagine, very few people do this, I honestly don't write anything down either :) And the password is such a thing that if you forget it, it's very difficult to remember, you will try a bunch of options and nothing will work. And here you just need to connect a new device to your Wi-Fi. In this article, I will tell you what to do in such cases. How to remember forgotten password from a Wi-Fi network, where to see it in the computer settings, or the router itself. I will try to write in detail about all the nuances, possible problems and not miss anything.
How can you find out a forgotten password for your Wi-Fi:
- View the password in the computer settings, if you have already connected (or are connected) to the network, the password from which we need to find out.
- View password in wi-Fi settings router.
- Reset the router settings, configure it again and set new Password.
We will start with the simplest, of course, from the computer. If you have a laptop (or PC with adapter), which was already connected to your Wi-Fi, or is currently connected, then most likely we will be able to look in the settings for the password that we have successfully forgotten.
We look at the forgotten Wi-Fi password on the computer: Windows 7, 8, 10
Many people ask where to find this password on the computer? In Windows 7, Windows 8 and Windows 10, this is not difficult, but XP has its own problems. Let's take a look at newer versions of Windows first. On the seven and eight, everything is almost the same.
Attention! Your computer from which you want to remember the key to the network must be connected to this network. If he connected to it before, it will work too. If you do not have such a computer, then go directly to the section where we will look at the password in the router settings.
And one moment: if you don't want to go through the settings, then you can try to do everything with the WirelessKeyView program, which I wrote about a little below.
Go to Network and Sharing Center.
Seva choose Wireless network management.
You will see a list of all the networks you have connected to before. Find the network from which you need to remember the password, click on it right click mouse and select Properties.
In the new window, go to the tab Safety, put a tick next to the item Display entered characters and in the field Network Security Key see our password.
Let's consider right away possible problemsthat you may encounter.
What if there is no "Wireless Network Management" item, or the password is not displayed after checking the box?
These are very popular problems. Managing wireless networks most likely may not be due to the fact that you do not have Wi-Fi configured on your computer at all (in this case, you will definitely not be able to see the password in this way)Or, I read somewhere that this could be due to the home version of Windows. What if there is no "Wireless Network Management"? You can see the password through the router, read about it below, or try this:
You will succeed on one condition: you must be connected to the network from which you want to view the password.
If the password does not appear after checking the box "Display entered characters", then try to view it in the router settings. Or, try from another computer, if possible.
How to find the Wi-Fi password in Windows XP? We use the WirelessKeyView program
As I wrote above, XP is a little more complicated. In principle, you can also see everything there, but not as easy as on Windows 7. Therefore, I advise you not to go into this jungle, but use the free WirelessKeyView program. Which, by the way, also works great in newer versions of Windows. What does the small WirelessKeyView program do? It displays all the networks to which the computer on which you started it used to connect. And of course, it displays the saved passwords for these networks.
Everything is very simple. Download the program from the official website http://www.nirsoft.net/utils/wireless_key.html. Open the archive and run the file "WirelessKeyView.exe"... The program will open, look for our network there (by name), and in the field Key (Ascii) look at the password for it. It looks like this:
Agree, everything is very simple and straightforward. Even on Windows 7 and 8, you don't need to bother looking for a password in the settings. Very good program, thanks to its developers. The only thing is that your antivirus can swear at her. Probably because of her slightly espionage purpose.
Where is the Wi-Fi password located in the router settings?
Another proven method. If you can set a password in the router settings, then you can see it there. And even if it doesn't work out, you can set a new password. If you could not see the key in the computer settings, there is no connected software Wi-Fi computer, and the WirelessKeyView program also failed, then only the router itself remains. Well, or a factory reset, but this is an extreme case.
What's more good about this method is that you can enter the settings even from your phone or tablet. Provided they are already connected. Just on mobile device I can't see the password, at least I don't know how to do it. Although, perhaps there are already some programs for Android (but most likely you will need Root rights there).
I think it's best to show separately how to view the password on a specific router manufacturer. Let's consider the most popular firms.
We look at the key to the Wi-Fi network on Tp-Link
We will start as usual with tp-Link routers... We need to go to the settings. We connect to the router via cable, or via Wi-Fi (which is very unlikely, because you do not know the password :))... Open the address in the browser 192.168.1.1 (possibly 192.168.0.1) and specify the username and password. The default is admin and admin.
To watch installed key, go to the tab Wireless - Wireless Security. In field Wireless Password a password will be specified.
Remember the password on Asus routers
Everything is about the same. We go into the settings, if you do not know how, then. The address is the same - 192.168.1.1.
In the settings, immediately on the main screen there is an item State of the system, the password is specified there. Just position the cursor in the field "WPA-PSK Key"... Like this:
By the way, you may still need it.
Find out the forgotten password on D-Link
How to do this, I already wrote in the article:. But, I could not help but write about it here, because D-Link is very popular. So, we do the same, and go to the tab Wi-Fi - Security Settings... In field "PSK encryption key" you will see the password itself.
We look at the password for ZyXEL
Go to your router settings ZyXEL Keenetichow to do it, I wrote. Go to the tab Wi-Fi network (bottom) and in the field "Network key" you will see the password itself, which is currently set, and which you forgot.
If you forgot your password on your Tenda router
So on Tenda routers the same way, go to the tab Wireless settings - Wireless Security and in the field "Key" look at the password.
On a Linksys router
Let's take another look at the Linksys devices. We do everything according to the scheme:, go to the tab Wireless network - Safety wireless network ... In field "Identity phrase" the password for the Wi-Fi network is specified.
That's all, as you can see, nothing complicated.
What if all else fails?
I think that there is only one way left, this is to reset all the settings and passwords of your router and configure everything again. You can configure it according to the instructions that you will find on our website in the "Configuring the Router" section.
I tried to collect on this page all possible wayswith which you can recover a forgotten Wi-Fi password. If something didn't work out for you, or some points from the article are not very clear, then write about it in the comments, we will figure it out. And of course, I will be grateful for a new and useful information on this topic.
As a rule, this question arises after you tried to log into another PC over the network, but received a login / password request. The situation is solved simply and quickly, the main thing is to learn a few elementary commands.
Where does windows store network passwords?
You can manage passwords in this OS using the "netplwiz" command. To start its execution, go to the "Start" menu and enter "Run" in the search bar, or press R + Win-key. The described method is relevant for windows 7, in windows XP you should use the command "control userpasswords2". When the corresponding window with accounts opens, go to the "Advanced" menu and select the "Management" sub-item. This tab is intended for any manipulation of passwords, user accounts, security settings and other actions. Naturally, all operations must be carried out from an account with administrator rights. This way you can easily change any password to a more suitable one. The physical storage for network passwords is the% systemroot% \\ system32 \\ config directory.
Requesting a nonexistent password
It often happens that computers controlled by different windows versions, it is difficult to network or connect to them from the outside. For example, Win 7 may ask windows XP for a network password that has not been assigned at all (or will not accept the existing passcode). How do I fix this problem? On all machines the following conditions must be met: users must be allowed access over the network by assigning a non-empty password to each; login-pass for authorization is the same on the "client" machine and on the server. If the connection is still not established, go to "Computer Configuration" (Win + R, enter gpedit.msc) -\u003e select "Windows Configuration", then "Security Settings", inside the "Local Policies" item, "Security Settings" again, sub-item "Network security: checking Lan Manager", include the line "Send LM and NTLM". Also check that the following settings are correct:
- in the "Control Panel", the item "All elements" -\u003e "Network and Sharing Center", the sub-item "Advanced settings" disable "Password protected access";
- the standard network model for Win 7 should be "Workgroup" (default);
- the guest account is enabled, in the local policy it is also removed from the item "Denying access to a PC from the network".
If you found out \\ changed the password and did everything as indicated in the article, but did not get access to the machine over the network, you need to study in detail the settings of local access policies on each specific computer.
SovetClub.ru
Entering a network password: where can I get it? Method of detection and shutdown.
Quite often (especially in small offices with installed local networks), you can observe a picture when it seems that all machines connected to local network, working fine, but when accessing some specific terminal, input is required network password... Where can I get it? The sysadmin, as most users think. No matter how it is! And if the administrator did not set any passwords in the system? What to do then? The answers to these questions are known not only to ordinary users, but even some beginners. system administrators... But there is nothing particularly complicated here.
Windows 7 network password entry: why is it needed?
Of course, no one argues that in offices with a sufficiently large number of computers connected to the local network, the use of access passwords, both at the direct input level and at the remote access, is justified.
But often, even if all terminals have the windows 7 operating system, they seem to "see" each other on the network, but when, for example, an attempt is made to send a document to print using network printer, even with the correct settings, nothing happens, since the network password is required. Where can I get it? The network administrator is not aware. In fact, there is a solution to this problem, and it is quite simple.
How to find out the input of the network password? View data
The password data themselves are hidden from the eyes of a user of any level (whether he is even a private user, even an administrator, the system still does not allow him to see the hidden data).
Nevertheless, there is a way out. If we take into account that all folders, including registration data, are invisible, you just need to enable the mode of displaying such objects in the same "Explorer". But in this case it will be rather difficult to find the folder with passwords.
In fact, everything is much simpler, and you do not need to spend energy on entering a network password. Where can I get it and find the parameter we are interested in? Elementary! You should just use the rundll32.exe keymgr.dll command, KRShowKeyMgr in command linerunning as an admin.
How do I disable or change network passwords?
In the initial version, we call the "Run" section from standard menu "Start" or using the combination Win + R.
Then, in the most called console, write the command Controluserpasswords2 and press the enter key. In the menu that appears, uncheck the password requirement for selected accounts (it does not work on windows 10!).
The same actions can be performed from the "Control Panel", where you need to go to the section of the Network and Sharing Center, and in the current (general) profile, check the box for using the shared access with password protection.
Security policy settings
In the most optimal version, when you need to enter a network password (where to get it, what to enter, enable or disable the service), you can use another fairly effective tool - editing group policies with setting access permissions to certain system functions at the administrator level or local user.
For access, use the gpedit.msc command, and in the editor itself - the computer configuration section, where you need to find the "LAN Manager" network security check directory and activate the LM and NTLM sending parameters in it.
Outcome
Actually, that's all. If there is a problem with the network password, you should simply disable it. If required, a new combination can be installed on windows 7 and below. But this will have to be done on all machines synchronized over the network, and provided that it is the seventh modification of the system that is installed on all of them.
It goes without saying that in the settings of the Group Policy Editor, you can change and apply some additional settings that can be attributed to a specific group or class of users working on the same terminal.
fb.ru
Windows 7 network password quick entry
Entering the network password is not a mandatory means of protecting your computer. But using it will provide you with network security. In order to open access to your personal network, an attacker only needs to know a username.
How do I enter my network password?
If you try to connect over the network from a computer running windows 7, the system will ask you to enter the network password. The windows 7 operating system will allow input if a number of the following conditions are met:
- Classic configuration of the network access model;
- Authorization under the same credentials;
- The client computer is authorized in the system under an account that does not exist on the server computer.
Today, when the development of technology does not stand still, the use of a flash card for data transfer is not relevant and outdated. To transfer information from one computer to another, today, is as easy as downloading information from the Internet.
Wired and wireless networks allow us to widely use all the possibilities of data exchange between computers. But, the use of such opportunities requires, in turn, certain knowledge. Currently, computers are often sold already with a pre-installed operating windows system 7, however, connectivity is mainly done through windows XP.
At the initial stage of configuration, it is recommended to use a passwordless connection scheme. Setting up a connection is quite simple - specific, special knowledge is not required here. If you need to create home network, change the settings in the control panel. You just need to sequentially go to the following directories:
- First, go to the "Network and Internet" position;
- Find the folder "Select homegroup settings";
- Finally, select “Connect Password Protected Sharing” or “Disable Password Protected Sharing”.
Then, configure the workgroup for all computers. If windows 7 is installed on all computers, then this setting will be done automatically. If you have a Windows XP computer on your network, you will be denied access.
In windows XP, shared folders contain symbolic names, and in order to create a shared folder, you will have to perform a number of other actions. This can be done by clicking the "Open general access to this folder "in the properties of the folder in the" Access "menu.
But given fact does not mean that you will be able to use the connection at a high quality level. In this situation, you should not fill your head with special wisdom. You just need to remove some "barriers", which are set out in the instructions specially designed for this.
To carry out the correct operation, it will be enough to create shared folder in the direct directory of the disk with the installed software. After that, all connection problems evaporate! And you will be able to enter the network password in windows 7.
How do I remove the network password prompt?
If you want to remove the network password prompt, you just need to do the following:
- Open the "Start" menu;
- In the line "Run" enter "Controluserpasswords2" and click "OK";
- Highlight the required account and uncheck the box “Require username and password”.
windows 7 allows you to disable the network password by changing the computer's security group policy. However, it must be understood that negative consequences of such actions are possible. Performing these operations can significantly reduce the security level of your computer.
comp-genius.ru
How to reset or change the password on a network share
When connecting to closed (password-protected) network resources, a username and password are requested. In order not to enter the password all the time, the user ticks the "Remember credentials" checkbox. To remove these passwords (for example, when changing users), you need to go:
Start → Control Panel → User Accounts → Account Administration
You can also get here through "Start → Run", enter the text "control userpasswords2" and click OK.
Note: "Start → Run" can be invoked by hotkeys System + R (where System is the button with the windows logo).
Any password can be "Change" or "Remove from storage".
A "change" password is sometimes required to change a user account.
For example: previously a manager used a computer and he had the right to change documents in the "Managers" folder of resource N, and now an accountant who has no right to use documents in the "Managers" folder, but must have full access to the folder "Accounting" of resource N.
If "Remove from storage" passwords, then the next time you try to access this resource, you will be asked for a username and password again.
If you need to make sure that the computer does not remember passwords, then you need to go:
Start → Control Panel → Administrative Tools → Local Security Policy → Local Policies → Security Settings → Network access: do not allow storing passwords or credentials for network authentication -\u003e Properties -\u003e Disable / Enable
Solution from Microsoft to reset passwords.
1. Log in to the system administrator. 2. Click Start → Run (System + R), enter regedit or regedt32, click “OK”. 3. In the editor, select the HKEY_USERS branch, but do not enter it. 4. In the editor menu, select File → Load Hive (File → Load Hive). 5. A file selection dialog box will open. Select Ntuser.dat at the root of the problem user's profile (Documents and Settings \\ User \\ NTUSER.DAT). After selecting the file, you will need to give the NAME of the loaded registry branch. 6. In the registry editor, go to HKEY_USERS \\ NAME \\ User. 7. We delete the keys. 8. Select the branch HKEY_USERS \\ NAME and press File → Unload Hive (File → Unload Hive).
9. Exit the registry editor.
spydevices.ru
Passwords saved on windows network connections
Passwords saved in network connections windowsadminsrtfmMarch 3rd, 2010 Passwords saved in network connections are located in the following paths: windows XPC: \\ Document and Setting \\ All Users \\ Application Data \\ Microsoft \\ Network \\ Connections \\ Pbk \\ rasphone.pbk
windows vista
C: \\ Users \\ All Users \\ Microsoft \\ Network \\ Connections \\ Pbk \\ rasphone.pbk
C: \\ Users \\ All Users \\ Application Data \\ Microsoft \\ Network \\ Connections \\ Pbk \\ rasphone.pbk
------------------
There is also the Dialupass utility, which will show all passwords on Dialup without any problems!
adminsrtfm.livejournal.com
One of effective means The security when using a network connection is the network password. It should not be too short and simple, as it provides protection against tampering for both wired networks and installation wireless connection by the type of Wi-Fi.
Instructions
You will need
- To find out the forgotten password you will need free program Asterisk Key. The Asterisk Key utility is simple and easy to use, specially designed to recover passwords hidden by asterisks.
Instructions
- Zone.net, computer information portal
202646
There is a lot of writing, but I think I can handle it, LET'S GO ...
I will use some quotes from my previous answers FOR DOMAIN ARCHITECTURE.
FOR SINGLE-RANK NETWORK ARCHITECTURE (WORKING GROUPS)
We simulate the situation
Your PC name \u003d MYPC
Accounts
Pertor's friend account \u003d Petrov, which belongs to working group Guests.
Friend's account Sidorov \u003d Sidorov, which belongs to the Guests working group.
[U] PS You will ask why the Guests - the less rights the person you trust, the more complete your information;)
Open folders
Petrovich for Petrov read-only
Sidor for Sidorov for reading and writing
For_all for everyone who has read / write access to MYPC, with no more than 1 user per folder.
We set the task - we begin to solve it.
First of all, let's create users and disable those we don't need.
To do this, right-click on the "My Computer" icon and select the "Control" item (mouse settings for right-handed people).
The Computer Management dialog box opens. We stomp further Computer Management-Utilities-Local users and groups-Users. A list of users will appear.
I recommend disabling accounts "HelpAssistant" and "SUPPORT _..." are never used in 99% of cases. Disconnecting is very simple - double-click on the user, a window opens and tick the "Disable account" box.
To ensure that all users are prompted for a password when logging into MYPC, disable the Guest account.
Now we create users. Right-click below the user list and select " New user... ". The" New user "window will open. Enter the following
User: Petrov
Full Name: Petrov Petr Petrovich
Description: My best friend
Password: [access password]
Confirmation: [Confirm Password]
"Require password change at next login" - blank
"Prevent user from changing password" - set
"The password has no expiration date" - set
"Disable account" - empty
Note Place the checkboxes as you see fit, but I usually do this. The Full Name and Description fields are optional.
We press "Create". The window closes - the user appears. BUT by default the OS creates accounts with "Users" rights, but we need "Guests".
To do this, click on "Petrov" 2 times, go to the "Group Membership" tab, select "Users" and click "Delete".
1) Click "Add" - "Advanced" - "Search" - the list of groups will be displayed, click "Guests" and OK.
2) Click "Add" and in the field "Enter the names of the selected objects" enter "MYPC \\ Guests" (for the English OS "MYPC \\ Guests"). By user Petrov everything is OK;)
We carry out a similar procedure for Sidorov. ;)
Close the "Computer Management" window with pure soul
Now we configure access rights to MYPC
Now I will start repeating myself, but if this is not done there will be a small gap.
Start-Settings-Control Panel-Administrative Tools-Local Security Policy
In the dialog box Local policies security
Security Settings-Local Policies-User Rights Assignment
We pay attention to 2 parameters:
1) Denial of access to the computer from the network
2) Access to the computer from the network
These 2 parameters are strongly interrelated, therefore, when specifying values \u200b\u200bin them, it is necessary that the parameters do not overlap, but even if they do overlap, "Denial of access to the computer from the network" has a higher priority.
Denying access to the computer from the network
Click on this inscription 2 times and enter the setting.
If there is an entry All in the list of refusals, then no one on the network will gain access to your PC (there are exceptions, but I will not go into details).
If the Guest entry is present, then users who have not been authorized will not receive access.
Here you can explicitly specify the users and workgroups to whom access is denied.
Let's clear all previous records.
And add the following:
"MYPC \\ Administrators"
"MYPC \\ Users"
"MYPC \\ Power Users"
etc. etc. except for guests.
Accessing a computer from the network
This list contains the names of users and workgroups who are allowed to access your PC.
For our example
Let's pay attention to one more parameter "Deny local login" and add "MYPC \\ Guests" there. What for?! - To prevent users with guest rights from logging into the OS from your PC (I already explained this in PS).
Comment It will be very cool if you put "MYPC \\ All" - it's strange that there have not been any viruses with such a joke, or I have not met;) You can check, but not on your PC !!!
Since we are in the "Local Security Settings" at the same time we will check one more parameter.
Security Options-Local Policies-Security Options and a booooooo big list will appear as google says. Just kidding, not that big :)
Pay attention to the parameter "Network access: sharing model and security for local accounts" and set "Normal - local users make sure as they do. "
After correctly performed operations, recheck the changes and reboot the PC for complete confidence in the acceptance of the parameters (although not necessary).
Having gained access to the PC, you need to restrict access to the shared folders.
To do this, the first step is to disable "Use simple file sharing". To do this, go to "Explorer" - "Service" - "Folder property ..."
The Folder Property dialog box appears. Go to the "View" tab. In the list " extra options": find the line" Use simple file sharing "and uncheck the box. Do not forget about" OK ".
Find the Petrovich folder on your local hard drive, right-click on it and select "Sharing and Security". A new dialog box will open. Go to the "Access" tab - put the dot "Share this folder" - press the "Permissions" button - delete "All" - press the "Add" button - enter "MYPC \\ Petrov" - click 2 OK.
Note If nTFS partition, in the properties of the folder there will be a tab "Security" - here we just add the user "MYPC \\ Petrov" and assign him certain rights from the list at our discretion.
OK and finished with Petrov.
Likewise for Sidorov, but do not forget that he must have read and change rights in his Sidor folder. This applies to the "Access" and "Security" tabs.
Find the For_all folder on your local hard drive, right-click on it and select "Sharing and Security". A new dialog box will open. Go to the "Access" tab and set the "Share this folder" checkbox. We put a dot "no more" in the right field will indicate the number 10 - reduce it to 1. Press the button "Permissions" and allow changes for everyone. OK now. Do not forget about the "Security" tab, if the section NTFS.
As a result, only those users who can log into your PC via the network will have access to the for_all folder, and no more than one active user.
Don't forget to tell your friends their accounts and passwords;)
That's all - the task is completed. Thanks for attention
