How to protect your home Wi-Fi network with a password. How to put a password on a router: step by step instructions

When you buy a new router, it is best to change your administrator password and Wi-Fi password to keep your connection secure and prevent other people from connecting to your Wi-Fi and using your bandwidth. To change the password for the Internet on your router, follow our recommendations.

Step 1. Open your browser and enter one of the following in the search bar.

If during installation you did not make any changes, then both the login and the password should be the same - "admin". Sometimes the password field is left blank. Click Login.

Step 2. Go to the "Setup" section at the top and click on "Wireless settings" in the left side menu.

Step 3. Click on the button at the very bottom of the page to go to manual configuration.

Step 4. Scroll down the page to Wireless Security Mode.

On a note! This is the section where you enter the wireless password. You can specify Do not forget to click "Save Settings" at the top of the page when finished.

If you have registered your router with mydlink, you can log into the mydlink web portal to change settings.

Method 2

Step 1. Go to https://eu.mydlink.com.

Step 2. Log into mydlink with your existing mydlink account and password.

Step 3. Select your router from My Devices. Go to settings.

Step 4. Go to "Basic Settings" to change your password. You can also click Show Password to display the password on the screen.

Step 5. Select "Apply" if you have made changes in "Settings".

Step 6. Select “Yes” if you want to apply the new settings to the router. It will take at least 80 seconds to save the changes and reboot the router.

How to change WiFi password on Asus router

How to set a password on TP-Link

Step 1. Make sure your computer is connected to the Internet. To access the router page, you need to be connected to the Internet. If your wireless connection is not working properly, you can connect directly to your router.

Step 2. Open your browser. To access the router page, you enter the TP Link router's address in the address bar.

Step 4. Enter the username and password from the router. As in the previous case, the standard login and password is the word "admin".

Note! If you changed but forgot them, you will have to reinstall it before proceeding.

Step 5. Click "Wireless" in the left menu.

Step 6. Click "Wireless security". This option is located under the Wireless menu in the left menu.

Step 7. Scroll down and find the WPA-PSK / WPA2-PSK field. It's at the bottom of the page.

Step 8. Create and set a new password.

Step 9. Click “Save”. This button is at the bottom of the page.

Step 10. When prompted to confirm your changes, click OK. This will preserve your new password, although you will still need to reboot your router for the changes to take effect.

Step 11. Click on "Utilities". It's at the bottom of the options column on the left side of the page.

Step 12. Click Restart. You will find a button at the very bottom of the Utilities menu.

Step 13. Click OK when prompted. This will restart your router. The new password will take effect immediately after reboot.

Important!You will need to reconnect each of your previously connected devices to the router with a new password.

As you have probably already seen, wireless internet is not so difficult. This can be done in just a few steps. We hope these recommendations will be useful to you.

Video - How to change the Wi-Fi password on a computer

Despite the fact that in my instructions I describe in detail how to set a password on Wi-Fi, including on D-Link routers, judging by some analysis, there are those who need a separate article on this topic - specifically about setting a password for the wireless network. This instruction will be given using the example of the most common router in Russia - D-Link DIR-300 NRU. See also: (different router models)

Is the router configured?

First, let's decide: has your Wi-Fi router been configured? If not, and at the moment he does not distribute the Internet even without a password, then you can use the instructions on this site.

The second option is to set up the router, someone helped you, but did not set a password, or your Internet provider does not require any special setting, but you just need to correctly connect the router with wires so that all connected computers have access to the Internet.

It is about the protection of our wireless Wi-Fi network in the second case that will be discussed.

Go to the router settings

You can set a password on the D-Link DIR-300 Wi-Fi router either from a computer or laptop connected by wire or using a wireless connection, or from a tablet or smartphone. The process itself is the same in all these cases.

1. Launch any browser on your device connected to the router in any way
2. Enter the following into the address bar: 192.168.0.1 and go to this address. If the page with the login and password request does not open, try to enter 192.168.1.1 instead of the above numbers

When requesting a username and password, you should enter the standard values \u200b\u200bfor D-Link routers: admin in both fields. It may turn out that the admin / admin pair will not work, especially if you called the wizard to configure the router. If you have any connection with the person who set up the wireless router, you can ask him what password he set to access the settings of the router. Otherwise, you can reset the router to factory settings with the reset button on the back (press and hold for 5-10 seconds, then release and wait a minute), but then the connection settings, if any, will be reset.

Setting Wi-Fi password

To set a password for Wi-Fi on firmware DIR-300 NRU 1.3.0 and other 1.3 (blue interface), click "Configure manually", then select the "Wi-Fi" tab, and already in it - the "Security Settings" tab.

In the "PSK encryption key" field, specify the desired password for Wi-Fi. It must consist of Latin characters and numbers, and their number must be at least 8. Click "Change". After that, a notification should appear stating that the settings have been changed and an offer to click "Save". Do it.

For the new D-Link DIR-300 NRU 1.4.x firmware (in dark colors), the password setting process is almost the same: at the bottom of the router administration page, click "Advanced settings", then on the Wi-Fi tab, select the "Security settings" item.

In the "Network authentication" column, indicate "WPA2-PSK", in the "PSK encryption key" field, write the desired password, which must consist of at least 8 Latin characters and numbers. After clicking "Change" you will find yourself on the next page of settings, on which at the top right you will be asked to save the changes. Click "Save". Wi-Fi password is set.

Video instruction

Features when setting a password via Wi-Fi connection

If you set up a password by connecting via Wi-Fi, then at the time of making a change, the connection may be disconnected and access to the router and the Internet is interrupted. And when you try to connect, you will receive a message stating that "the network settings saved on this computer do not meet the requirements of this network." In this case, you should go to the Network and Sharing Center, then delete your access point in the management of wireless networks. After finding it again, all you need to do is to specify the set password for connection.

If the connection was broken, then after reconnecting, go to the administration panel of the D-Link DIR-300 router again and if there is a notification on the page that the changes made must be saved, confirm them - this should be done so that the password on Wi-Fi did not disappear, for example, after turning off the power.

Many people, having installed a router at home not on their own, ask themselves the question "how to set or change the password?" or "where to change to put the password from wifi". This can happen for a variety of reasons. The wizard who installed the router forgot to put the password on the file or simply did not tell you. Some just didn't even set up the router. And now evil neighbors use your Wifi for free and spoil your internet connection speed. To prevent this from happening, I will continue to tell you how to password-protect Wifi. You can set a password for wifi in several steps. First you need to go to the working interface of the router (), then to the menu , you need to find the "Wireless network" setting item in English it is called (Wireless or WLAN), then we look for the fields with the signature "Network name" (SSID) and the "Wireless network key" (PSK) fields, and then save all the settings. These 4 steps are suitable for all wifi router models. I will try to tell you in more detail about changing the password on WiFi, on all popular routers and 3/4 g modems from providers. Also, if you are interested in how to put a password on a computer, I recommend an excellent article.

How to change the password for wifi "d-link dir-300"

Setting a password for wi-fi, on routers ( d-link dir-300, d-link dir-320, d-link dir-615, d-link dir-620, d link dsl 2640u ) is the same. First, let's log into the router, for this you need to open any of the browsers

In the address bar in the lead 192.168.0 .1 and press "Enter". An authorization window will open in front of you. Enter the login and password that the wizard left you after setting up. If he did not leave anything, then, most likely, the settings are standard, enter admin and admin.

The router security settings window has opened in front of you, here we will change the password to WiFi. Next to "Authentication" select "WP2A-PSK" - this is the most secure encryption method for your router. In the "PSK encryption key" field, enter a new password of at least 8 characters. That's it, we press the "Change" button.

Now you need to reconnect to your router. And that's all, the answer to the question of how to password-protect the wi-fi router d link dir 615 and other models is solved.

How to change the password for wifi "asus rt-g32"

Password protection for Asus routers is also easy. This description is suitable for asus rt-g32, asus rt-n10, asus dsl-n10.Let's go to the router, open the browser, enter 192.168.1.1. If you haven't changed your username and password, the default is Admin / Admin .

Then we go to the "Wireless network" menu item. This is where we will set the password.

Fill in the fields "Authentication Method", set WPA2-Personal, and in "WPA Encryption" from the list, select "AES". Then put your password (at least 8 characters) in the WPA pre-shared key field.

For the new versions of the router firmware from Asus 3.x.x.x. the entry rules are the same. And the wi-fi setting is similar. After you enter the settings panel, on the left in the side menu, select "Wireless network" then fill in the SSID fields - the name of the network, you can specify any word in Latin. "Authentication method" - be sure to set WPA2-Personal, "WPA pre-shared key" - your network password, specify any at least 8 characters. We press the button "accept".

You now have a new Wifi password.

How to change password on wifi tp-link

So, at this point we will find out where to change the password from wifi on routers ( tp link tl wr841nd, tp-link tl-wr741nd, tp-link tl-wr740n, tp-link tl-wr340gd). Open a browser, enter 192.168.0.1 in the authorization fields, enter the data that we set during setup (by default, Login: Adnim, and Password: Admin).

If you entered the correct data, the main settings window will open in front of you. Select from the list on the right section "Wireless" (Wireless mode), and then subsection "Wireless Security" (Security).

After entering the settings, click on "Save".

Do not be alarmed when you see the red inscription below, the router simply asks you to reboot. To do this, follow the link "click here".

and then click on the Reboot button

We are waiting for some time and the answer to the question "how to password-protect a tp link router" is received.

How to change password on wifi router zyxel

Quite a popular router in our open spaces, and as many may have already noticed the quality of this router is not inferior, and in some cases even surpasses other popular shares. And so at the moment there are two versions of the firmware from this company zyxel. And I will explain how to change the password for two, so this guide is suitable for all routers such as: zyxel keenetic, zyxel keenetic ii (2), zyxel keenetic lite 2, zyxel keenetic start and many others.

So the process of entering the router interface is the same for all firmwares. In the address bar of any browser (this is Opera, Google Chrome, Yandex, etc.) we type 192.168.1.1, Login is usually admin by default, and the password is 1234. BUT this information is written on the authorization window. After entering the data, press the "Login" button.

Now if you need to set or change the name of your Wi-Fi network, go to the "Wi-Fi network" section and select the "Connection" item. Here in the field "Network name (SSID)" - set the name of your wireless network. It can be whatever you like. Let's save the setting by clicking on the "Accept" button.

The next step will be why you came here is setting a password, in the "Wi-Fi network" section we select the "Security" item. In the Authentication field, the option is WPA-PSK / WPA2-PSK. The network key format must be "ASCII". In the field "Network key (ASCII)" - think of and enter a password, it must consist of 8 characters. After that, save the settings by clicking on the "Accept" button.

The second version of the firmware is a little more complicated in my opinion. But the manufacturers left the entry process the same. To go to the wireless network settings, select the wi-fi icon in the bottom panel.

Now in the stripped access point, fill in the fields: "Network name (SSID)" enter the name of the network. This is the name of the network that will be displayed when connecting to Wi-Fi. In the "Network Security" field from the list, select WPA2-PSK .. In the "Network Key" field, enter any password. Which should consist of eight characters and numbers. Then we save the settings by clicking on the "Apply" button.

.

How to change password for wifi byfly

Changing the wi-fi password to byfly means changing the password on routers often used with the Internet from byfly companies. These are such models as zte, huawei, Promsvyaz. Below we will disassemble each of these routers separately.

Put a password on wifi routers Zte

This method of changing the password for wi-fi is suitable for the entire line of Zte routers: still ha zte mf90, zte mf30, zte e5501, zte e5502, zte zxhn h208n, zxv10 h201l. And many more, so we read carefully. To get started, you must make sure that you are connected to the zte router. Then we open any browser, and in the address bar we write 192.168.1.1, the authorization window opens, the login and password are by default admin and admin. We drive them and click Login.

Then if you want to change the name of your network. Go to the WLAN section and select the Multi-SSID Settings item, and in the SSID Name field, write any name in Latin letters. Then we save the settings by clicking on the Submit button.

Now let's move on to the most important thing and put the password on the wi-fi of our zte router. To do this, in the same WLAN section, go to the Security menu item. Here we need to select the type of encryption in the Authentication Typr field, I advise everyone to choose WPA2-Personal, it is the most secure. In the WPA Passphrase field, set the password for our Wi-Fi network. Save the settings, click Submit.

.

Put password on huawei wifi routers

Let's move on to changing the password, as well as on other routers, look at the router interface. To do this, open any browser and write the address of our router in the address bar, by default it is 192.168.100.1. A window will open asking you to enter your login and password. The login and password can be read in different ways (login / password): telecomadmin \\ admintelecom | telecomadmin \\ NWTF5x% RaK8mVbD | telecomadmin \\ NWTF5x% | telecomadmin \\ nE7jA% 5m | root \\ admin. But the most common combination is telecomadmin \\ admintelecom. We enter.

After logging in, go to the WLAN tab.

Here we need to fill in the fields with the correct images. In the SSID Name field, enter the name of the network, come up with it yourself. Then, in the Authentication Mode field, select WPA2Pre-SharedKey, now in the WPAPreShareKey field we put our password, it can be anything but at least 8 characters. Then click the Apply button.

Attention: This is the most important part, after any changes to the settings of huawei routers, you need to save the router settings on another page. To do this, go to the System Tools tab, select Configuration File from the left menu, and click on the Save Configuration button.

.

Put a password on wifi routers Promsvyaz

I would like to immediately notice that the byfly company installs the firmware for industrial communications on various models of routers and this firmware has a white-green interface of the router's personal account. It is absolutely identical with the modem interface zte only the inscription in the left corner "Promsvyaz". So we will consider the white-yellow interface of the Promsvyaz m200a modem.

Let's start, as always, open a browser on the computer and write 192.168.1.1 in the address bar, Login and Password are admin \\ admin by default. And click the "Login" button.

Now in the Interface Setup section, select the Wireless item. Here in the poly Authentication Type, select WPA-PSK / WPA2-PSK. After that, in the Pre-Shared Key field, enter the password we invented, the code must be at least 8 characters.

.

How to change the password for wifi Rostelecom

Yes, Rostelecom is one of the most popular companies in the Russian Federation. Internet users from this company use a great variety of routers. But the most popular of them is sagemcom which is a router from Rostelecom companies. So we will consider changing or setting a password on this particular model, if you have a different one and you did not find it in this article, write in the comments, I will definitely finish talking about it.

How to change the password for wifi sagemcom

Let's get started, open any browser, and write 192.168.1.1 in the address bar, Username - admin, Password - admin. And click on the "Login" button.

Then everything is simple in the window that opens, in the left menu in the "WLAN Settings" item, in order to set the name of the wi-fi network, select the "Main" item. Here, in the "SSID" field, set the name. Then click on the "Accept / Save" button.

Now, in order to set a password for WiFi, in the same section "WLAN Settings", select "Security". Now let's check that in the "Select SSID" field, the name that we set is displayed. In the "Authentication" field, select "Mixed WPA2 / WPA-PSK", then in the "WPA / WPAI password" field, enter any password that you come up with (it must be at least 8 characters). Then we save the settings by clicking on the "Accept / Save" button.

.

How to change the password for wifi altel 4g

And how we connect to our modem, and in the browser, in the address bar, type 192.168.0.1 or https: //m.home, the modem will ask you to enter the password, if you have not changed it, then it is password. Enter the password and click "Log in".

We look at the top of the menu and go to the Settings section, in the left menu you need to select "Wi-Fi settings", after which in the "Wi-Fi network name (SSID)" field you can set the network name to your taste. And save the settings by clicking on the "Apply" button.

Now in the same section, select the item "Security settings". We select the security mode the same as in the picture, in the “Password” field we write what we think is necessary, the main thing is that it should be at least 8 characters.

Wireless Wi-Fi is the most convenient way to connect to the Internet for mobile devices such as laptops, tablets and smartphones. Moreover, in recent times Wi-Fi technology is increasingly being used for connectivity and common desktop computers. This way of connecting to the World Wide Web allows you to get rid of ugly wires that can spoil any interior design.

However, when using a wireless connection, be aware of safety. When setting up a home wireless network, many users simply do not know how to set a password on Wi-Fi. As a result, they and the data that are transmitted over such a network are available to everyone. Now we will try to solve this problem.

It's not so easy to tell how to set a password on Wi-Fi. The fact is that there are now many wireless manufacturers. Each of these manufacturers uses their own shell to configure the router. To help with setting a password on a Wi-Fi network, we will walk through the process step by step.

Step # 1. Open the router's web interface

All modern routers are configured via the web interface. There is no need to be intimidated by the word "Web interface", because in fact it is a small site that is hosted on a router and available to the user from any browser.

Open your favorite browser and enter the IP address of your wireless router in the address bar. The IP address of the router can be 192.168.0.1 or 192.168.1.1. If you don't know exactly what IP address your router has, then you can just try one first, and then the second.

After you have entered the IP address of the router, you will see a form in which you need to enter your login and password for access. If you are, you can check out our article on this topic.

After entering the login and password, the router's web interface will appear in front of you. In the picture below, you can see the web interface of the ASUS router.

Step number 2. Find the section with Wi-Fi settings

In the web interface of the ASUS router, to access this section, just click on the "Wireless network" link in the "Additional settings" section.

Step number 3. Put a password on Wi-Fi

In the section with Wi-Fi settings, you need to choose an authentication method, an encryption algorithm and enter (key) to access Wi-Fi.

In the "Authentication Method" section, select WPA2. This is the newest and safest option. We choose the AES algorithm as the encryption algorithm, this is also the most reliable option. And of course, do not forget to set the password for Wi-Fi. To do this, enter a set of numbers and symbols in the "Key" field. After all the settings are set, we save the result, in some cases.

All these simple steps are enough to set a password on Wi-Fi. The next time you try to connect to your Wi-Fi network, your computer will ask you to enter your password.