In use, almost every modern family has at least 3 devices that allow access to the Internet, and it is more convenient to do this through a wifi router. This is a device that allows you to distribute the signal to several gadgets, while you do not need to use additional wires or pay for traffic at a higher cost. The most common problem with routers (routers) is the situation when a user has forgotten the password for the router and cannot connect to it on his own or provide access to friends or family members.
If the security key for the connection is forgotten
In case you forgot the password from wifi router, namely from a wireless network, but on the main computer the Internet connects and works, it is easy to restore the access code. There are several equal ways, so you can choose an alternative if one of them did not work.
Firstly, you can find out your wireless access code through the control panel. Go to “Start”, then go to the “Control Panel” tab, from there - to “Network and Internet” and, finally, to “Network Control Center and sharing". After that, in the left list, select “Management wireless networks", Find the name of your connection, open context menu right-click and go to "Properties". The system will move you to the wireless information window, where you need to go to the "Security" tab and check the box "Display entered characters." After that, the key to enter the wireless network will appear in the line "Network Security Key".
Secondly, the password for the router to connect to wifi can be found through the Web interface. To restore the password, you can go to the settings page of the router via a web browser, in the address bar you need to enter the combination “192.168.1.1” or “192.168.0.1”, after which a page will appear asking for a username and password. If you did not change them, they remain standard, in most cases you need to enter the word “admin” in both fields. If this combination does not fit, you need to look at the bottom of the router, it usually has a sticker with the exact IP address of the configurator, as well as with the default username and password. In the settings window that opens, you need to find the item associated with Wifi, it can be called the same name, "Network" or "Wireless Connection." Then go to the “Wireless Security” section and check the box “Show network key” (“Unmask”).
Thirdly, to achieve the goal you can use special programe.g. WirelessKeyView. It needs to be downloaded from the free site and run on behalf of the Administrator without installation. In the window that opens, you can see all the passwords that have ever been used in the system, and find the appropriate one among them. This method is the longest, so they resort to it infrequently.
If the web interface key is forgotten
When setting up an Internet connection via routers, many advanced users resort to using the web interface, rather than the express installation program supplied by the manufacturer. However, in an effort to secure their Internet access even more, some are changing the standard access combination in the web interface. It is rarely necessary to use it, so some forget the security code to enter the configurator, and therefore all settings become impossible.
First you need to check whether you really changed the password from the standard one, if not, then the process of recovering the access code to the router will be simple and will not take much time. Most simple solution In this case, the router will turn over and find the manufacturer's sticker. It usually shows the IP address of the router to access the web interface, as well as a combination of login and password for access.
If there is no sticker, and the question of how to find out the password from the configurator remains valid, you can choose a combination among the standard ones in which the login is always “admin”, and the password can be as follows:
- admin;
- (empty line);
- 1234;
- 12345;
- 12345678;
- 12345678q;
- password.
You can also find out on the Internet which standard passwords manufacturers of different routers install in configurators. Usually the predefined combinations do not differ for all models of one company, so finding the right one by contacting the forums or online operating instructions will not be difficult.
If the standard data has nevertheless been changed, but it is necessary to perform some actions in the web-interface, there is nothing left but to return the device to the factory settings. To do this, press and hold the “Reset” button on the router. After that, the standard combination for accessing the configurator will be returned, and for further actions the algorithm does not change.
In order not to forget the standard or independently set login and password, it is better to write them on a piece of paper or in a notebook.
When resetting to factory settings, it must be borne in mind that you will have to reconfigure your Internet connection. This is not only about the username and access key that were provided by the provider, often more complex connection parameters have to be changed.
Even in the process of entering the admin panel of the router, you may encounter a number of problems, for example, one of which is the wrong password for the router. Let’s figure out why this situation can happen and how you can eliminate it yourself. It will also be useful for you to read this article: 
To access the admin panel of the router, you will need to enter a standard login and the password is usually ( admin admin), which is indicated on all routers. But it happens that when you open the browser window and try to enter the admin panel of the router, the wrong password is written to you. This can happen due to a number of reasons.
Admin Admin is not suitable when trying to enter the router settings
Point in the window admin admin and writes " the username or password you entered is incorrect". Now we’ll figure out what could be the reason:
- Your router was configured by you or a computer specialist who changed the password so it doesn’t work.
- This could be a router malfunction.
- Indicate incorrect standard data that are registered on the router.
Solution to the problem:
- We clarify what specific information you need to specify for your router. For this we are looking for all necessary information on the router itself.
- Try to remember, maybe you wrote down the password somewhere, or try to remember it.
- Well, the most reliable way it click a button Reset - and reset all settings to factory defaults.
Find the button on your router Reset - this button is deepened into the router case, press it with something sharp and wait 10 seconds. The router will reboot, then try to enter the admin panel by typing the standard administrator credentials. Standard routers of different companies for entering the admin panel
On devices TP-LINK enter admin admin. 
- Here, too, fill in all the fields as on TP-LINK. On devices Zyxel: address 192.168.1.1 ( my.keenetic.net) Login is admin. And the password is 1234. On Zyxel keenetic Start information is not indicated. And by default, the router settings are not protected. The router itself will prompt you to configure a password.
Routers Linksys: address is 192.168.1.1. User Name and Password - admin. They do not indicate this information on the device most likely, they want users to configure using the disk.
Asus: the address is 192.168.1.1. There is nothing new either, fill in the standard data. Instruction manual
Sometimes in the process of using a computer, a situation arises when it is necessary for a network connection.
If you forgot or don’t know network password, you can change it to new password by resetting.
If using Ethernet routers, open the settings and reset the values \u200b\u200bthere, returning the previous ones to the default. Then open any Internet browser, insert the address of the router in the address bar and enter the login “admin” without specifying a password.
Set the necessary security parameters, enter a new username and write down the password that you will later use when connecting. Click on “Save Changes.”
If you are using a different type local area networkdownload special software To crack a password, install it on your computer and log into any of the networks found. Then change the settings according to the previous paragraphs. However, be careful when choosing a site for downloading the program - on some of them, a Trojan may be introduced into the program.
If you need to know a password to access someone else’s wiFi point, you need to use the Windows OS of this computer.
Open the “Control Panel” section on the computer and select “ Network connections". Then open the item “Wireless network connection"And click on the" Install Wireless Network "function.
In the opened section “Wireless Network Wizard”, click on the “Next” button and do the same in the next window with the name “Add New Computers”. Then select the section “Set the network manually” and after “Next” select the section “Print network parameters”.
When a window with Notepad appears on the screen, view its contents. Among the parameters of the wireless network, you will find the line "Network Key", where the desired password will be printed.
We are all working in the networkWe use a very large number of different passwords. And of course, we often forget them. Recall password sometimes it’s quite difficult, as more often than not, it is encrypted with asterisk *******. But, fortunately, you can still find out the hidden password. Here's how to do it.
You will need
- To find out forgotten password you will need free program Asterisk Key. The Asterisk Key utility is simple and convenient to use, specially designed to recover passwords hidden by asterisks.
Instruction manual
After processing is completed, in its window “Asterisk Key” will open you decrypted password.
Related videos
note
Asterisk Key Decrypts hidden passwords different languages.
The Asterisk Key program decrypts passwords hidden by asterisks from any running application or web page
Sources:
We all lose or forget required passwords. Sometimes this is very inappropriate. This also applies to the passwords under which we register on sites. However, there are programs whose task is to recover passwords. For example, passwords hidden with asterisks can be recovered using the Asterisk Key program.
You will need
- You will be desired program Asterisk Key. Asterisk Key is specially designed to decrypt forgotten passwords hidden behind asterisks.
Instruction manual
Related videos
note
Asterisk Key password recovery program finds and decrypts forgotten passwords from any running application or web page.
Helpful advice
Sources:
- Zone.net, computer information portal
To access various functions personal computer Admin rights are often required. If you need to go to operating system as an administrator, you need to know the password for this account, if one is set. Having forgotten it, you can still enter the OS, but it will be much more difficult to do this. You will have to remember the password or somehow bypass the procedure for entering it.
Instruction manual
Unfortunately, you will not be able to recover the password for the Administrator account. If you cannot remember him, there is no way to recognize him. But you can reset it, enter the OS and install it again.
When rebooting your computer, press the F8 key (or another, depending on the model motherboard) to access the selection of OS boot options in the corresponding menu.
Need to select " Safe mode". In the list of users, select the account whose password you know, or one that is not protected by it.
After loading the desktop, you will see a dialog box informing you about the continuation work windows in safe mode. You need to click on the “OK” button, click on the “Start” menu, select “Control Panel” and go to the “User Accounts” section.
In the menu that appears, click on the button “Change account". In the list of accounts, find the option you want. Select “Change Password”, enter the new password in the window that appears, then enter again. Leave the field called “Old Password” blank. It remains to click on "Change Password."
Reboot the PC so that the system boots in standard mode. When a prompt appears, enter the new password.
You can change the password using Net User. Select “Safe Mode with Support” for this. command line". Select an account with the password you know or without.
You will see the OS command interpreter window on the screen. Indicate the name of the account, in the next line - the new password. Next, enter the word Exit, then press Enter.
Reboot the PC in normal mode, after which you can enter the OS on behalf of your user account with a new password.
Helpful advice
Try to use passwords that you personally could easily remember. Use the hint.
With the development of the Internet, there is a need to use devices that provide constant access to the World Wide Web. AT recent times gained popularity Wi-
Further, by going to the "Security" tab, it is advisable to enter the "Network Security Key", where it will be displayed hidden characters, meaning forgotten password. In order to find out, you only need to put a check mark next to the item “Display hidden icons". It should be noted that the recovered password for reliability should be written on a piece of paper and put it in a specific place.
In the event that the computer does not have the “Wireless Network Management” item in the control panel, then in the notification functions, click on the special connection icon, after which the list of networks will open. After that, you need to right-click on the network to which the laptop or tablet is connected, and then select "Properties". Next, it is advisable to put a check mark next to the item “Display entered characters”, after which the desired Wi-fi password will be displayed.
It is also possible to find the lost Wi-Fi password in the settings of the router. To do this, simply connect the router to the computer using the supplied network cable. After that you need to connect this wireless device and in the address bar of the browser enter the following address: 192.168.1.1, then dial in the username and password in order to gain access to the settings. Next, go to the “Wireless Mode” tab - “Wireless Mode Protection”. In parallel with the line “PSK Password”, the access code for Wifi network. Please note that on Asus routers, the password can be registered directly on the main page.
Sources:
- how to find out your internet password
