What if Windows found hard drive problem drive?
Sometimes users are faced with an unexpected problem, suddenly seeing a system message with information that the system has detected a problem hard drive. Almost every user after that falls into a stupor and does not know what to do next. We'll look at the 3 most common reasons for this error, and let's tell you what to do in each of these situations.
You can lose all your programs, data, documents, videos, music and important images when your hDD in the end failed. Pay attention to the section of the disc that fails, and the one that is not.
- Your hard drive does not work and may die sooner or later.
- You may encounter hang-ups and not respond to errors.
- First, do not panic, stay calm.
- how many bad sectors and other useful information.
It's time for reserve copy all important data. You can use these sections to save your valuable files. However, if your entire hard drive does not work, you need to have a new one or an old one from your old computer. Advice. When you receive this warning message, the bad news is that your hard drive will fail sooner or later. Good news you can use to back up in case of data loss.
Reason # 1 - Problem with external media
So what should you do if Windows detects a hard drive problem?
First of all, you need not panic, but remember what happened right before the appearance of this message. This system alert is displayed if the Windows operating system could not write or read any files located on the hard disk or an external drive. To determine which disk contains the problem, you should pay attention to the lower part of the warning:
Once you have received this warning, there are a few things that you need to know about. First, you need to know that the failure of your hard drive is inevitable and may sooner or later die. This means that you can lose all your data, programs, documents, videos, music and photos stored on your hard drive. Secondly, your computer may need more time to load than ever, or get stuck, and stop responding more often. Finally, your system files can eventually become damaged and, therefore, not boot.
This is the letter of the problem volume. If this line displays the letter of the partition that belongs to the external drive, then do not despair - you just need a volume windows tools.
Please note that you should not remove the external drive from the USB port immediately after copying or writing files. The fact is that even after the disappearance of the copy window, for a few more seconds the necessary information can be added. It is recommended that you remove external drives in a secure manner.
The hard drive on your computer is not working right now, but sooner or later. Maybe in one day, maybe in a week. Therefore, it is better to take precautions, in case there is a problem with the disk. Solution 1. Replace the hard disk drive with a new one using software to clone a free disk.
What does "Windows found a hard disk problem"
Step 5: You can select three options in the transaction summary window. After the disk is cloned, you can delete the old hard disk and connect the new one to the socket of the old disk. Solution 2. Backing up the hard drive with free, but full software.
Reason # 2 - Errors in Windows operation
Rarely enough, but sometimes this error arises because of the very operating system Windows. This can be caused by a system crash, as well as the result of a virus attack. In this case, you need to test the computer for errors and viruses.
Reason # 3 - Hard drive failure
If it's not about external storage devices and not in the operating system, and still not clear, and besides the computer began to hang, reboot itself or something else, it's strange to behave, then you need to act immediately! First of all, save all the information you need. You need to copy the data to a separate medium, it can be an external hard drive, a flash drive, or a data storage cloud.
First of all, you need to copy documents from work or school, a family photo album, mail databases, and then movies and music.
After saving important data, you can search for the cause of the problem. For this we will need. To perform an express test, you can also help free utility, under the name Aida64, which you can download below.
You can also prevent data loss by regularly creating a disk image. Step 1: Prepare the equipment or determine where to save the backup image. Select "Backup Disk" on the "Backup" tab. To regularly create backup copies of the hard disk, you can mark the "Schedule", for example, daily, weekly and monthly.
Once you find yourself on a disk failure, you can buy a new hard disk and restore the disk image. It is very likely that the hard disk is wrong and speaks of corruption in the file system, bad sectors, a mechanical problem and much more. The hard drive is responsible for the storage and security of the data. In addition, as soon as your computer infects a virus, the antivirus in most cases does not compensate for the damage caused by the virus; therefore, error messages are received accordingly.
Using Aida64, you can analyze the indicators of S.M.AR.T. If the indicators S.M.A.R.T. indicate the presence of read errors or bad blocks on the surface of the disk, then you did not save information from it in vain. It is better not to use this hard disk, but to buy a new one right away.
If there is still an after-sales warranty, then with the question " what to do if Windows detects a hard drive problem"You need to contact the specialists of the service center and transfer the computer, for diagnosis and warranty repair, if necessary.
If the warranty has already expired and you have opened system unit for self-repair, we will list below the list of the most common problems and methods for their solution:
1.
Low-quality IDE or SATA data loops or bad contacts on them.
Decision:
It is necessary to remove and insert them from the connectors on the motherboard and on the hard drive itself to remove oxides and dust from the contacts. Then swap the data loops from the hard drive and DVD drive. Or you can replace the data plumes with new ones (the cost of the cable in the computer store is a few dollars).
2.
The computer's power supply is defective, because the computer freezes, and the hard drive at certain times does not get enough power to work.
Decision:
It is necessary to temporarily disconnect all unnecessary energy consumers (fans on the computer case, DVD drives, PCI devices) from the power supply unit leaving only the hard disk connected. You can also try to connect to the hard drive other connectors from the power supply.
The simplest, but at the same time, effective way to diagnose a hard disk is to connect it to another computer. If the problem repeats there, uniquely - the hard drive itself is faulty. You need to take it for diagnosis to a service center or take care of buying a new one. To avoid the repetition of all these difficulties, as well as to ensure the safety of your data, we recommend that you immediately purchase a new hard drive.
Then, many incorrect operations, incomplete uninstallation of the program, improper shutdown of the computer, registry error, fragmented files, junk mail files also inevitably cause errors. Users did not know which system file is needed, and if it is corrupted.
Running a system file scan can scan all protected system files and replace corrupted files with a backup, as a result, the error can be fixed. 
First, download and install the program on your computer. In this article, we will consider this issue to teach you how to solve it. This can be the result of many factors, such as disk errors, virus attacks, failures file system and problems with the operating system. In addition, as a rule, this can lead to disk failure, system malfunction and even catastrophic data loss.
A number of users operating windows systems may encounter a system message "Windows detected a hard disk problem". If you skip this message, it appears again, and the frequency of its appearance time after time increases. In this article, I'll tell you how to fix the error - Windows has detected a hard disk problem, what are the causes and symptoms of this problem, and how to remove it.
Scanning a disk using antivirus software
Thus, it is necessary to solve this mistake as soon as you meet it. You can follow the next 7 steps to get rid of it. After scanning the disk using the anti-virus software and make sure that there is no virus on the disk, you can monitor the error message to back up the data on the disk. Backing up data will play a big role in the future.
Recover a reliable disk recovery tool
The error may be due to system file errors or corruption. Assuming that all of the above tools can not effectively resolve the error, you can also resort to the disk recovery tool. In today's market there are many such tools. But you have to make sure that the tool you select is a reliable source. Inadequate tools can cause additional damage to your disk and data.
What does "Windows found a hard disk problem"
The main attribute of this dysfunction is the resulting message "Windows detected a hard disk problem", as well as the system prompt immediately begin the process of archiving the available data. This problem is fixed on almost all modern operating systems of the Windows family, starting with Windows XP and ending with Windows 10.
Look for professional disk repair support
It is recommended to return to recovery specialists. You can contact the manufacturer of your computer or third-party disk repair support. In fact, sometimes, it's possible that there are no errors on your disk. Therefore, you can simply turn off the dysfunctional function of the disc. This error message constantly appears, and your computer freezes or sticks after you see this error.
Why does the hard disk have problems?
The cause of the error is the failure of the hard disk, which was already mentioned in the error. Immediately back up files to prevent loss of information, and then contact the computer manufacturer to determine if you need to restore or replace the disc. Now there can be any number of things that cause a problem to be detected on your hard drive, but we will continue and list all possible cause, on which this error occurs.
In this case, this message usually appears more than once, and time after time, forcing the user to start thinking about a Windows error in which hard disk problems were detected.
Typically, this message is the litmus of serious problems on the hard disk, such as:
If malware is detected, it will automatically remove them. To clean your system, select the "Registry" tab and make sure that the following is set. After the backup is complete, select "Fix all selected problems". Select the "System Protection" tab and select "System Restore".
Follow the on-screen instructions to complete the system restore. After reboot, you will be able to. But before proceeding to any conclusion, you must run the diagnostic tool to check whether you really need to replace the hard drive or not. This will automatically check all hardware on your system and report if any problem is detected.
- The hard disk "sypetsya" and soon completely cease to work;
- Information on the hard drive will soon be lost forever;
- The system files on this disk are seriously damaged, and soon the system will stop loading altogether;
- The computer will slow down and hang, boot for a very long time, and will soon stop responding to user commands.
Causes of the problem
Before, we will consider the solution to the error "Windows detected a hard disk problem", you need to determine the causes of this dysfunction. They are as follows:
Method 8: Disable error prompt
On this page, you will learn how to fix this by checking the virus, disk errors, damaged sectors, a file system error, or a system file corruption. Try these solutions and protect your system and data. It appears every 5 minutes or so.
Why do I need a backup?
Virus, malware or real errors on the disk "And is there a way to fix the problem?". And it always comes with many terrible consequences. Disk failure - your hard drive may fail, freeze, die or not respond sooner or later. Loss of data - you can lose all your programs and data files when your disk eventually fails.
How to fix the error where Windows detected a problem in the HHD drive
So, how to fix the error "Windows detected a hard disk problem"? I recommend doing the following:
If the problems are on the disk "c", and you have it system-wide, then the chkdsk utility prompts you to run the test the next time you start the system. Agree to the proposal by clicking on "Y", reboot the system, and wait for the utility to check your disk for errors.
What should I do if Windows detects a hard disk problem?
Back up your files to prevent loss of information. Contact the computer manufacturer to determine if you need to repair or replace the drive. Usually this gives you two options: "Start the backup process" or "Ask me later". Here we collect several other possible solutions.
Scanning your computer for viruses
You can read to get the details. If any viruses, malware or other threats are detected by the program, get rid of them. If the program does not report any problems, go to the next test to fix the problem.
Create a backup of your entire computer
After making sure that the virus or malware is not the cause of the "hard drive detection problem" error. it the best way for disaster recovery.- Run a hard disk surface test. Among the various programs recommended for these purposes, I would single out free application MiniTool Partition Wizard (also you can mention other alternatives, for example MHDD or HDAT2). Download, install and run the specified application, right-click the problem disk (usually the system C: \\), and select the option "Surface Test". Then click on "Start now". The program will analyze the surface of the hard drive, the more errors there are, the more "red" blocks you will see in the graphics window of the program.
As for the already mentioned MHDD, it is also possible to use its functionality, by performing its analysis of the disk surface in REMAP mode.
Checking and fixing disk errors or bad sectors
If there is no disk error or bad sectors on the hard disk, you can continue checking, corrupting or corrupting the system file. The command scans all protected system files and recovers corrupted files using backup.
You can try them one by one to correct the error in your case with success. A bad sector is an area on the hard drive that can not store information. Correcting file errors takes longer than the report, and fixing errors in files and bad sectors takes even longer. The "Troubleshooting" section at the end of this section. This section discusses the most frequently used aspects of Chkdsk.
Also, you can disable the appearance of the most problematic message "Windows detected a hard disk problem" by changing the corresponding registry entry. To do this, it will be enough to perform the actions specified in this video:
It is advisable to select "Scan" and try to repair the damaged sectors to physically check the surface of the hard drive. However, this step increases the time required to complete the scan. Using graphical interface the user.
You may be prompted to perform a scan the next time you restart the computer. Using the interface command line. This error message indicates that the hard disk is no longer safe to store data, and there is a need to create a backup of the data before they are lost forever. What causes this error?
In this case, I would advise you not to rush to disconnect this message, since it is an important indicator of the performance of your hard disk and the operating system as a whole;
- Check the integrity of your OS registry with the help of special utilities CCleaner, RegCleaner and analogues;
- Take care of cooling your hard drive. In some cases, the appearance of bad sectors was caused by overheating of the hard drive. Use special cooling stands with built-in cooling system, this will avoid overheating of the hard drive.
Conclusion
The most common cause of the error "Windows detected a hard disk failure" is the shedding of the hard drive, with the gradual failure of the hard drive. In this case, it is recommended that the first step is to make a copy (backup) of the required files on the this disc (some make a copy in the form of an image of the entire hard drive), and only then do the whole complex of actions described by me above. If the problems with the disk are of a random nature, then the action system utilities chkdsk and sfc will restore the working capacity of your hard drive, guaranteeing it stable work in future.
In contact with
