In windows 10, unlike the seven, there can be two user accounts: local and in Microsoft.
To delete a Microsoft account means getting rid of storing your data on their server, in other words, from espionage.
To delete any you must necessarily have administrator rights, that is, be the owner of a computer or laptop (you can and without rights, only here this option will not be affected.
In general, you do not need to delete the account from Microsoft - you can simply switch to local and forget about the network.
To delete an administrator account, you need to create another one and hang these rights on it. Now more.
By the way, if it comes to removing, then - windows 10 spy on you.
So increase the performance of your laptop / computer and keep your data secret.
How to delete a Microsoft account on windows 10
First click the start button and open the options section.
Now click on the line "Login instead with a local account".
After that, enter the password from the Microsoft account.
Now enter the password for the local account.
How to delete a local user account on windows 10
Here you need to consider two options: you want to get rid of the administrator account or a simple user.
To do this, go to the tab "Family and other users, and then click on the" add a new user "line.
After adding, click on it, click edit and give it administrator rights.
After that, reboot the computer and log in under the newly created new user and as described above, enter the settings.
Now you have the option to delete when you click on the old administrator, which you actually wanted.
You can use other options to remove / disable the accountants, for example, only there already sort out yourself - it's not difficult. Successes.
Often, after installing Windows 10, many users are faced with the problem of when to delete Windows 10 accounts, either because they are not being used, or because of the inconvenience of logging on to the system. The root cause, in fact, is not particularly important. Let's consider the simplest variants of actions that can be removed in Windows 10. This is done quite simply and literally within a few minutes for "accounting" of any type and priority.
Why do I need a Microsoft account?
Let's start a little from afar. Why do I need to activate Microsoft accounting? But only then, that without its creation the system on the computer, laptop or mobile device simply will not be established. In addition, it is these registration data that will later be used to log in with the rights of the administrator.
Not everyone, however, knows that there is an additional priority account of the so-called super administrator in the "seven", on whose behalf sometimes it is necessary to run programs or processes for installing specific software that requires changes to the system files, even though the user has all the necessary rights. We will dwell on this later.
As for Microsoft's "accounting", very often a situation is observed when the password for the login is very long or complicated, and entering it constantly becomes a real problem, especially when it contains an almost not memorable combination of letters, letters or symbols.
Local accounts
With local accounts, things are much simpler. As a rule, they are created on terminals, if several users are supposed to work in the system. But the "ten" is such that it itself initially creates several "accounts", which, in general, hang in the dead weight system.
In principle, for normal logging in and out, it's enough to leave one (current) local record and delete the Windows 10 accounts of any other type. How to do it, now and will be considered.
We switch from "accounting" of Microsoft to a local record
Before deciding how to delete an account on Windows 10 (meaning "accounting" for Microsoft), you first need to rebuild the logon parameters, that is, set the access condition not with the use of "Microsoft" registration, but with the local record.
In general, the process of deactivating "accounting" and changing its settings is reduced to leaving one record and entering another. To do this, we use the standard "Start" menu, where you just click on the user name, and from the drop-down menu, select to change the account settings. In the settings window we are interested in the section of e-mail and "accounting". In the window to the right there is an additional entry line under local registration. Click on it and go to the next menu.
You will have to enter the current password, and then enter the new login information. In principle, if you do not use the password later, you can leave the corresponding field empty. Then just confirm the logout and shutdown. At this stage, this can be limited. With the following downloads, the system will use the local registration. At this time, we will stop.
How to remove unnecessary Windows 10 accounts: the first way
Now let's look at the questions related to removing unnecessary data. There are two ways to do this. The first method, allowing to understand, on Windows 10, is to use the same section that was mentioned above.
Only in this case, the "Family and other users" menu should be used to perform the deletion process. In the window on the right, select the entry to be deleted and the corresponding action.
Note: after this, the system will issue a warning that all parameters and files saved by this user in the corresponding section will be deleted. If some information should remain, first it is better to cancel the process, then move or copy them to another location on the disk and repeat the operation again. At the stage of deleting files, we agree, after which all the registration data from the system will be deleted.
How to delete a local Windows 10 account through the second method
Consider the second, no less effective way. When you need to decide how to completely delete a Windows 10 account, you can also use the classic method of accessing user accounts through the standard "Control Panel".
First you need to log in with administrator rights, in the "Control Panel" select the account section and go to the management point of another account. As in the previous version, select the entry you want to delete and activate the process.
Again, the system will prompt you to delete or save user information (files). Depending on their needs, we choose what is required. By the way, this method is good because Windows initially offers to save the files created under the deleted "accounting", and not to cancel the process and first copy or move them to another location, as in the previous case. However, in the process of deleting registration data and parameters, this does not affect in any way.
Deactivating a Microsoft Account
Now we pass to the most important thing. It seems that the computer "accounting" Microsoft is deactivated. In fact, it has not gone anywhere. To completely delete Windows 10 accounts (in the sense of "Microsoft"), they must be deactivated (closed) on the official resource of the corporation. Note that if you do not use it, some online services will become unavailable.
To close the registration, you need to go to the login page and enter the information originally specified during registration. Then we use the privacy and security section. At the bottom of the page there is a section for closing the account, at the entrance to which the corresponding button will be displayed. Click it, choose the reason for closing, and then mark the entry for closure.
Separately, it is worth paying attention to the fact that the "accounting" is closed not immediately, but only after 60 days from the activation of the process. In this case, if a user has an attached device, such as a mobile phone, a special code will be sent to him, which during this period can be used to restore the registration. But whether it is worth doing such things, everyone already decides for himself. Of course, if the built-in services "tens" or the declared extended support are not used, as well as access to the online store, there will not be anything terrible in that the user refuses such registration. As mentioned above, this will not affect the system's performance, unless some services stop functioning. In some cases, there may be problems with saving contacts, say, in Outlook.
In addition, if the user already had invoices for payment for the services of the store, you should either pay for them, or send a request for cancellation.
Problems with custom files
How to remove Windows 10 accounts is, in general, already understandable. As for the preservation of information, in principle, you can do two things. For example, you can initially move files to another location on a disk or in a logical partition, or copy them to a removable media. However, the way to remove "accounting" from the "Control Panel" in this sense is more preferable, since the system itself will remind the user of the need to save important data. However, what to do depends on the user.
Conclusion
In conclusion, it should be noted that only the most basic and simplest methods were considered here, allowing you to delete Windows 10 accounts of any type. As you can see, the technique is quite simple for both local computers and for Microsoft online service where you can get rid of registration once and for all. The only question here is whether it is necessary to remove the "Microsoft" registration, because then some of the services will become inaccessible. However, you can still restore the record within 60 days. The main thing is not to miss the moment of expiration of this period.
Windows allows you to create various users of the operating system for convenience. There are situations when a certain user is no longer needed and it is necessary to delete the Windows account created for him.
Enable administrator rights
Before you delete an account from the system, make sure that your account has administrative rights. Other accounts usually have limited capabilities, including they can not delete other accounts.
In Windows 7, by default, administrator privileges are disabled, so you must enable them first. To do this, use the keyboard shortcut Win + R. In the window that opens, enter lusrmgr.msc and press Enter. Then select "Users", click the "Administrator" account with the right mouse button, open the "Properties" window and uncheck the "Disconnect account" checkbox, then save the changes and restart the computer.
Deleting an account
If you did everything right, after the above steps you will be able to work with user accounts. The instruction how to delete a user account is simple and usually does not cause problems.
- Open the "Start" menu and enter "accounts" in the search bar. After pressing Enter, you will be able to work with user accounts.
- Go to "Manage another account" to see a list of all users on the computer. All you have to do is select the record you want to delete and select "Delete account".
- After that, tell the system whether to save the user files of the account being deleted. If necessary, restart the computer.
Deleting an admin account
Often, users ask about how to delete an administrator account.
In Windows 7, this option is disabled, that is, you can not delete this account. However, it can be disabled to close other users' access to it. To do this, use the instructions above to enable the administrator account. The only difference is that you will need to check the "Disable account" checkbox.
In WindowsXP, you can delete an administrator account only if there are at least two entries with administrator rights. So, by logging in under one of them, you can delete the administrator account by going to "Control Panel" and then follow the chain: "Computer Management - Local Users".
The most intuitive and simple solution to this problem is change status of an active record through settings. In addition, this method provides for preservation all user data, for example, personalization.
To do this, press the " Start»And select the icon« Options", Located above the icon" Shutdown". A few more convenient can be a keyboard shortcut Win +I. Before making any changes to the system, it is recommended that save all working files, because after a computer restart, unsaved changes will be lost. Then you need:
How to delete a user
This manipulation is possible only if there are at least two. This is done through admin. If you need to get rid of it, you must first grant administrator rights to another account and perform the operation through the latter.
As in the previous case, it is necessary to go to the section " Accounts" at " Parameters". Here you need to select the item " Family and other users». 
After clicking on the button " Remove"The system will warn that all files and data located at C: \\ Users \\ Removable user name will be lost.
After a short period of time, the data will be erased.
Removing from the control panel
This solution provides several more options. The first step is to log in with administrative rights. Right click on " Start-up"Opens a context menu, at the bottom of which there is a link to" Control Panel". Regardless of its design ("Category", "Small Icons" or "Large Icons"), which can be changed in the upper right corner of the interface, you must select the " user accounts". After this, it is necessary to observe the following algorithm of actions:
The last step is the confirmation removal, followed by reload a computer.
There is an alternative method, which is performed using the utility run, launched by a keyboard shortcut Win +R. Here you need to enter the command netplwiz, then the window of settings will open. 
Here you need to select the button " Remove", Previously highlighting necessary user.
How to remove a user from the command line
Running should be performed on behalf of the administrator. There is a team NETUSER, which is designed to manage credentials. Entering a command without additional parameters will print them all in the form of a list, and adding / delete to the user name will erase it from the computer's memory: 
This method, perhaps, is the fastest.
Deleting built-in records (guest, administrator, etc.)
This action can complicate and slow down the system, because by these accounts management computer. To implement this procedure, you will need:
Deleting an administrator is not recommended action. If it hinders in any way, it's better to simply hide her. To do this, you can use the command line shell: 
