Intel Updates How to install and update the Intel driver in a simple way. Backup using Free Driver Backup

Sometimes what you need to prevent is updating the driver for the hardware component. This usually happens when the update has an unexpected failure, because of which the item stops working. In such cases, he offers a free tool that temporarily prevents driver updates. Therefore, you can expect the patch to be available for installation.

Once you start it, the tool will display the screen below. Note that the tool scans the drivers. When this process is complete, click. On the next screen, select the driver that you do not want to update, and click Next. This driver will then be configured so that it will not be updated. On the screen that appears, you can click "Explore". extra options"To try and find a solution to the problem that affects this driver, but this step is optional.

Is the driver installed and can it now be updated? Run the tool again and click Show hidden updates. The next screen will show the driver that you decided not to update. Select it and click "Next". From there, the driver will be updated in the normal mode.

For some reason, you do not need automatic updates. In other words, the update should be disabled. There is a relatively simple way to do this, but you should be aware that the lack of updates increases the likelihood that your computer will suffer from serious disruptions. Do it, at your own peril and risk.

The "Run" tool opens. A window called "Services" appears. Now in the next window click the "Stop" button. Insignificant supervision can damage operating system. Again, follow step by step at your own peril and risk. Right-click on the right side of the editor, select "New" and "Key." Finally, double click on it and enter a value of 1. On the next screen, check the "Disabled" option and click "OK".

If you want to cancel the configuration, go back to this step and check the "Enabled" option. It has an improved detection mechanism, so customers get full, accurate information and scanning frequency to move from the tool "once" to the constant experience that customers can provide the newest driver faster. In principle, downloading and analyzing using a broadband Internet connection lasts less than six minutes.

For all other graphics controllers, contact the manufacturer or the place of purchase of your computer to support the drivers. These drivers are not detected by this utility. Abandoned products are not found. Contact the manufacturer of your computer or the place of purchase for assistance.

These drivers are supported only by the computer manufacturer. Chinese Chinese English FrenchGermanItalianJapaneseChorneranPortuguese BrazilianРусский Spain. Click the "Run" button; the System Tray icon starts and the default browser automatically opens. Click "Save Changes" to save the new location.

Right-click the icon in the system tray and select "Find new drivers". A new window opens prompting you to remove the program. You must manually download and install the latest published version. The new version allows automatic update  with future versions. . Information about the performance of your computer will be used to improve, which you might need in the future.

The information collected can include the name of the manufacturer of your device, your processor model, the configuration and display settings, the version of the operating system, the version software, regional settings and location information, your location and time zone, information about how you use your device and software, how to use the functions or the randomly generated unique identifier that is stored on your device. The information collected does not include the content that you create or publish, and will not be used to identify or communicate with you.

We will regularly monitor your system until you decide not to participate. To stop your participation.

• Click Settings.
• Click.
• Click Save.

Click "Save".

• Right-click the icon in the system tray.
• Click the "Participation in the product improvement program" tab.
• Check Yes.

Audio Drivers Audio drivers refer to your motherboard, not to your processor. For the appropriate drivers for your system, contact the manufacturer of your system or motherboard. There is no need to update this file because it is not a driver. After discovering and installing the chipset drivers, download and install the latest drivers for each of the components that do not work properly.

The following list lists common types of drivers and their associated problems, which can be fixed by updating the driver. Then move the external media to another computer and install the driver. On the "Drivers and Downloads" page, expand the "Firmware" section.

Figure: An example of the firmware update settings.

If the message reappears, follow these steps. If the message no longer opens, everything is ready.

• Connect your computer to the Internet if it is not already connected.
• In Device Manager, expand the Other Devices node.
• The names of other devices must be removed and added to the desired category.

Installing the Workstation Drivers Using the Tools and Driver Installation Wizard

To manually install the workstation drivers

• To install the chipset drivers, follow the on-screen instructions.
• Select "No", not now, then "Next".

• Sets all available updates.
• When prompted, select "Restart".

In the update history, the update will be displayed as follows. As a result, updates are provided to all surface devices, although not at the same time. Because of this change, if you did not install the update on February 4, it will be provided in two updates.

• These are the same updates released after 4 February.
• Scroll to the right side of the screen, then select "Settings."
• If updates are available, select View Details.
• Check the updates that you want to install, and click Install.
• Install all available updates.
• You can not delete or restore previous version  firmware updates.

Record video from games using hardware acceleration. When we talk about hardware acceleration when recording from games, we are actually talking about hardware acceleration when compressing the video stream, because this is exactly the hard part of the game record. The higher the resolution, the higher the amount of compressed video stream. In principle, the compression is performed by the processor, but during the game it has many other obligations, and it can not spend a lot of time processing video streams. Therefore, most codecs used for this purpose, lossless, are designed for easy and fast use.

Unfortunately, however, this speed and ease are paid for by quite a large number of final files. This format can provide excellent compression and quality with the correct settings. However, this is quite complicated, and compression requires a lot of computation, which makes it completely unsuitable for real-time compression if the processor does not work quickly to make it work. This is not bad in principle, but no hardware coder can get the quality of good software.

These quality compromises are due to the fact that the hardware coders are optimized for speed, and partly because the graphics processors radically differ from the standard processors, which means different compression algorithms, so they suffer quality. Again to say that hardware coders are not bad, they just are not at the same level as the software. In other words: hardware acceleration of video shooting is certainly not suitable for archival recordings of movies and serials that you store on your hard drive, but it's an excellent choice for compressing movies and serials that will be displayed on small displays, because there will not be a difference in quality .

If you are not sure that you have hardware, in which you need a hardware coder, that's how you can find it. The information it provides for graphics cards is rather scarce, but it's enough for our needs. Download the program, unzip it in a convenient folder and run it.

All information about the processor is located on the first page of the first two fields. Just make sure that your processor matches any of the following. To check the video card, go to the "Graphics" tab. In the upper left corner of the window is a drop-down menu for selecting a video card. If you only have one, the menu will be grayed out and inactive. In this case, you will immediately see the model. If you have two video cards, the menu will be active. In this case, open it to see another one.