Not everyone can successfully download and install iOS 12 on their iPhone and iPad. Some users have encountered issues during the update process. The most common problem is the iPhone is frozen on an apple and will not recover normally after iOS updates 12. Don't worry about it, still not so bad. Here are 3 ways you can fix to fix iPhone stuck on Apple logo without losing data when upgrading to new system.
How to Get iPhone / iPad Out of Recovery Mode
Method 1. Force restart the device
IPhone does not load - hangs on an apple. The easiest way to develop iOS 12 stuck on the Apple logo is to reboot your device, although a little trick won't significantly fix this problem most of the time. Anyway, there is no harm in force restarting your iPhone.
On iPhone X or iPhone 8/8 Plus:
1. Press and quickly release the volume up button.
2. Press and quickly release the volume down button.
3. Press and hold the side button until the Apple logo appears.
On iPhone 7/7 Plus: You need to hold down the Power button and the Volume down button for about 10 seconds. You can release the buttons when the Apple logo appears on the smartphone screen.
IPhone 6 and earlier, iPad or iPod touch: Press two buttons at the same time - Home (round under the screen) + Power (power on and lock).
Without releasing them, wait until the iPhone or iPad turns off.
Method 2. Restore iPhone via iTunes
If you've previously created a backup or just don't mind losing iPhone files, you can restore your iPhone via iTunes. How to put an iPhone into recovery mode.
Step 1: Connect your device with USB cable to your computer and open itunes (in case it doesn't open automatically when connected). Click "Restore iPhone ...", "Restore iPad ..." or "Restore iPod touch ..."
Note. If iTunes doesn't recognize the iDevice, you first need to manually put it into recovery mode:
Force restart the connected device by following the instructions, but do not release the buttons, when the Apple logo appears, wait for the Connect to iTunes screen.
IPhone X, iPhone 8, or iPhone 8 Plus: Press and quickly release the Volume Up button. Press and quickly release the volume down button. Then press and hold the side button until the Connect to iTunes screen appears.
On iPhone device 7 or iPhone 7 Plus: Press and hold the Side and Volume Down buttons at the same time. Keep holding them until the "Connect to iTunes" screen appears.
On an iPhone 6s and earlier, iPad, or iPod touch: Press the Home button and the Top (or Side) button at the same time. Keep holding them until the "Connect to iTunes" screen appears.
Step 2: In recovery mode, click “Recover” in the pop-up window to restore from the backup.
Method 3. Fix iOS 11 No Data Loss Problem with Tenorshare ReiBoot
If the two options above do not work for any reason, as the buttons do not work, the iPhone cannot be entered into recovery mode or DFU manually, you do not have a previously saved backup, etc. good tool - designed by the Tenorshare team, allows you to restore an iPhone that is hanging in an apple with a few simple clicks, without the need to restore iOS devices, without using the Home or Power buttons and without losing any files. It is fully compatible with all Apple device models: iPhone XS / XR / X / 8/8 Plus / 7/7 Plus, iPhone SE, iPhone 6s / 6s Plus / 6/6 Plus, iPhone 5s iPad Pro (9.7-inch), iPad Pro (12.9-inch), iPad Air 2 / Air, iPad mini 4/3/2 / mini, iPad 4/3/2, and iPod touch. It is very easy to use for beginners.
Step 1: Download the program and connect the device to the computer with via USB - cable.
Step 2: The program will access the device, then the button "Enter recovery mode" is displayed. Press this button and start entering recovery mode.
Step 3: After successfully entering Recovery Mode, you can click Exit Recovery Mode to save your iPhone from having to recover and successfully restart it.
If the above methods did not help to solve the problem, click the "Resolve All Freezes" button, and then you will get to the recovery page, click "Fix it now".
Now you will be "Download Firmware Package" interface, click "Download" button to download the firmware package online.
After the firmware package has been successfully downloaded, click the "Start Repair" button to start the system restore.
In addition, it can help you completely solve various freezes (stuck on a black screen / during power on / on blue screen death), with iOS system (stuck in DFU mode / in recovery mode / in the HOME button) and with an error (iTunes crashed when syncing / updating / restoring device) on iPhone / iPad / iPod touch without data loss or damage.
If rebooting your device, updating the firmware, and even performing a factory reset didn't work, the issue might be hardware related. In this case, it is best to contact a service that specializes in repairing Apple products.
In addition, Reiboot can also solve these problems -, etc.
Apple iPhone 7 can get stuck on the Apple logo during launch, although this happens very rarely. This kind of trouble usually happens after a failed update. software: The company logo is displayed on the screen and the phone remains inoperable.
We're going to focus on a few possible solutionswhich should get your iPhone back up and running.
1. Force restart your smartphone
First, just try to force the iPhone to restart so it starts the startup process from scratch.If you are using new iPhone 7 with a touch-sensitive Home button, forced reboot press and hold the "Volume Down" and "Power" buttons. And if the device is older, then press and hold the Home and Power buttons until it reboots.
2. Try to update iPhone 7 through recovery mode
The next thing to try is to force the update operating system through the recovery mode. The advantage of this method is that it allows you to reinstall iOS without deleting data on your phone. It will only help you if the problem is a failed installation system update, and hardware problems or the consequences of a jailbreak will not go away.
To do this, you need a computer installed on it latest version iTunes and USB cable.
- Open iTunes on your computer and then connect your iPhone 7 via USB
- Put your smartphone into recovery mode by following these steps:
- For iPhone 7 and newer: Press and hold the Power and Volume Down buttons at the same time. Wait from iTunes for the message “iPhone was found in recovery mode”
- For older iPhone models: Press and hold the Home and Power buttons until iTunes says iPhone has been detected in recovery mode. - IN iTunes on your computer select “Update”.
3. Recovering iPhone 7 with DFU
This way of solving the problem involves using the DFU (Device Firmware Update) mode, which will subsequently delete all data on the iPhone, so you need to have a backup at hand for recovery.
If you have problems with your iPhone due to a jailbreak and you are not able to solve them by uninstalling the tweak or Cydia app, then restoring through DFU mode is the only salvation. Keep in mind that after completing the procedure, all data will disappear from the phone's memory.
How to put iPhone 7 into DFU mode and how to perform recovery:
- Launch iTunes on your computer if you haven't already
- Connect iPhone 7 or iPhone 7 Plus via USB to your computer
- Turn off the device while holding the power button. Wait until the screen turns off completely
- Now press and hold the power button for about 3 seconds
- While continuing to hold this button, now press and hold “Volume Down” at the same time. which is on the left side of the iPhone 7
- Continue to hold these keys for about 10 seconds
- Screen mobile device should remain black while iTunes should display a pop-up alert that the iPhone has been detected.
How to enter DFU mode on older models:
- Connect your iPhone to your computer and launch iTunes
- Turn off your mobile gadget completely (hold the power button until it turns off)
- Hold the Power and Home buttons at the same time for about 10 seconds and then release the Power
- Keep holding "Home" pressed until an alert from iTunes appears on the computer screen with the message "iPhone has been found"
- When the phone is in this mode, its screen should be completely black, that is, turned off. The display may not light up, but this does not mean that it is not working.
Is your smartphone still stuck on the Apple logo? Nothing helped?
In the event that it was not possible to revive the iPhone even last way, then the problem may be much more serious than you thought. The phone may not start due to a hardware malfunction, so you will need to contact service apple support or go to an official service center.WiFi does not work in iPad Air - Solution Problems in the operation of the wireless WiFi connection on the iPad in most cases arise as a result of mechanical damage. Less often, you can find options for ..
Replacing the earpiece speaker in iPhone X - instructions
Replacement conversational dynamics in iPhone X - iPhone instruction The X is Apple's new flagship that truly stands out from all previous smartphone models. Besides the improved performance ..
Why does the iPhone only work on charging? Repair instructions
Why does the iPhone only work on charging? Repair instructions Despite the high quality of all iPhone components, power supply problems may appear during prolonged use of the gadget. & Nb ..
Why Apple Pay isn't working on iPhone 7 and how to fix the problem?
Why does not it work Apple Pay on iPhone 7 and how to fix the problem? With Apple Pay technology, users can keep all their bank cards in in electronic format... Standard Apple Wal ..
Self-replacement instructions battery on iPhone 6 Battery change is a routine procedure that every owner of a modern device performs. Battery replacement iPhone 6 for ..
Self-replacement of the case iPhone 6 Hardly at least one owner of an iPhone has never thought to change the case on their device. If you still have the courage and decide to do it yourself, I will help you ..
IPhone 6 Display Replacement Always turn off the power completely before performing iPhone 6 display replacement. It is necessary to press the well-known button until the power indicator slider appears.
How to disassemble the iPhone 5s with your own hands Apple announced the release of the new iPhone 5s on September 10, 2013. The disassembly of the iphone 5s is similar to the previous models and requires a hole.
After trying to turn it on, your iPhone stuck on an apple and no longer responds? This indicates that a serious error has occurred in the operation of the system, which the device cannot solve on its own. Be prepared to have to restore your iPhone. Below are all possible waysthat will help you effectively solve the problem you have encountered.
The "eternal reboot" of the iPhone occurs due to the failure of the standard algorithm of actions that are required to turn on the smartphone. The smartphone may not be able to access the central processor, check the memory and configure the internal components.
There are only three reasons that provoke the "eternal reboot" of the phone:
- IOS updates, recovery and transfer of data from computer to IPhone and other actions during which a third-party device gains access to the functions of the phone's cores. Perhaps the error was caused by the "defenders" programs, faulty cable or USB port;
A hard reboot helps 99% of the time. However, user data is not saved. After restarting, all your personal files will be deleted. We advise you not to backup your data, because its contents may contain utilities and options that caused the freeze.
To do Hard reset, hold down the Home button and the Power button until the Apple icon disappears. Next, animated gears will appear on the screen, which indicate the start of the system rollback process.
Hard Reset will end in 5-10 minutes. Then the iPhone will turn on. You will need to spend basic setting phone again (sign in to your Apple ID, set up a fingerprint scanner, etc.).
If a hard reboot did not bring any results, it is necessary to start the DFU mode - updating the standard firmware of the phone. This option allows you to enable automatic diagnostics and troubleshooting of microprocessor problems.
As a result, DFU will rollback peripheral software, without which the hardware components cannot start up properly.
Connect your IPhone to personal computer and open the iTunes for PC utility. Make sure the phone is turned off. Press and hold the Power and Home buttons for 8 seconds. Then release the Power button, but still hold Home until the iTunes has found an iPhone in recovery mode message appears in the main iTunes window.
Next, in the program on the PC, press the OK button to start the process of rolling back the microprocessor firmware. Do not disconnect your computer or iPhone from your PC until the end DFU recovery... This can lead to a complete inoperability of the phone.
Possibly after a recent phone repair the cables motherboard were loosely connected. Turn off your phone and open the back cover. Then check the connection of all the loops shown in the figure. If necessary, remove and reconnect the component using a spudger or plastic spatula.
Any iPhone 7 user can face a problem when their device freezes on the apple logo. This rarely happens, but it does happen sometimes. Usually this nuisance is encountered after iOS update or system crashes. On the screen, the Apple logo is lit on a black background and nothing happens. Naturally, it is impossible to use the telephone.
We will focus on a few effective solutions that can help solve this problem, which occurs for several different reasons. We will of course start with the most simple ways and smoothly move on to more complex and more efficient ones.
1. Force restart your iPhone
Simple helps in most cases. The device repeats the boot process from scratch.If you have an iPhone 7 or a newer device, then hold down the “Volume Down” + “Power” buttons. Hold them until the smartphone reboots.
If you have an older device like iPhone 6S then do the following: 
Did not help? Does your iPhone still hang on the apple after restarting? In this case, let's move on.
2. Try to update your iPhone through recovery mode
The next thing we suggest to try is to force a phone update through recovery. Thus, you will try to reinstall the operating iOS systemwithout erasing your data. If you have any problems after updating Athos, then this method will help you. If the device is out of order, that is, there is a hardware problem, then nothing will change.To do this, you need a computer original cable Lightning and installed iTunes app... It is available on all Macs, but if you have Windows, then install it manually, after downloading iTunes from the official Apple website.
- Open iTunes on your computer and connect your iPhone 7 via USB.
- Put your smartphone into recovery mode by following these steps:
- If you have an iPhone 7, then press the power and “Volume Down” buttons. Hold them until iTunes tells you that the connected device is in recovery mode.
- If you have an older device, then press and hold the power and Home buttons until you see a message on the computer screen that the iPhone is in recovery mode.
- In iTunes, select “Update”.
3. Restore iPhone via DFU mode
In the event that none of the above has helped, then we recommend using more effective methods. As a result of restoring iPhone through DFU mode, you will lose all data stored in its memory. This method is very effective if the gadget does not turn on after installing Jailbreak or any tweaks.You can transfer iPhone 7 or more old model into DFU mode according to the instructions.
iPhone Still Won't Turn On? Keeps hanging on apple during startup?
What could have caused the iPhone to hang on the apple?
Most often this happens as a result of a failed phone update, but there are many other reasons, such as these:- Problems with updating software
- Issues due to Jailbreak or any tweaks
- You are using the beta version of iOS
- Malfunction of internal components
Have you managed to bring your device back to life? Which of the ways helped you?
There are times when the IPhone hangs on the apple image, most likely this was due to the fact that the "Delete content and settings" command was incorrectly executed or a jailbreak was performed. Remember, don't try to fix it yourself. file system or even hack IOS - since the consequences can be irreversible.
The reasons for such a malfunction may still be:
- In rare cases, hardware failure;
- Problematic firmware;
- When jailbreak tweaks and devices are incompatible.
All these errors will not be fixed by repairing the IPhone, but by completely flashing the phone. If you are sure that it is necessary to repair the IPhone, since there are physical malfunctions, you should not do it yourself, and it is better to immediately contact the service center. You can solve the problem with program crashes yourself.
Reestablish IPhone via iTunes
If a download is spinning on the IPhone display and it does not turn on, you can try to put the phone in DFU mode and when iTunes help restore, for this you need:
- Connect your phone to your home PC;
- Press and hold the Power and Home keys for 10 seconds;
- Release Power but hold Home.
The screen will still be off, but the device will show up in iTunes. Then hold Shift on the keyboard and click "Restore". The firmware does not have to be done as suggested by iTunes, but you can pre-download required version on computer.
Tweaks not compatible with the device
Here you need to check the latest downloaded tweaks for compatibility with the phone. It is incompatibility that is the most common cause of a malfunction.
You need to reboot the device after each installed tweak, this will help prevent the iPhone from freezing in the future.
To check tweaks, you need to boot your device in Safe Mode:
- Turn off the phone;
- Hold down the key where the volume increases and turn it on;
- Wait for the iOS to load.
If the download is successful, then the problem is that the last downloaded tweak is not working properly. You need to go to Cydia and remove the problem tweak, while access to all applications will be preserved.
on failure
In order to determine exactly when the download stops, you need to turn it off, and after a couple of minutes turn on the device again, and then try to make a call. If the call passed, then the problem lies at the last stage of the download. Recovery can be done with file manager iFunBox or iTools utility. If the call does not go through, then you need to use iTunes to restore.
Trying to fix hardware failures yourself is a bad idea. Repair IPhone is better in specialized service centers, because this technique does not tolerate negligent and unprofessional treatment.
