When recovering IPhone iTunes sometimes gives an unknown error with a number, without correcting which it is impossible to continue working with mobile device... Troubleshooting methods vary depending on the fault number that caused the iPhone to fail.
Error classification
Service apple support on a special page on the site, it divides the failures by numbers into several categories. However, you will not find some codes. For example, there is no number 52 on the support page, because iTunes does not crash with such a code. Error 47 is also not listed, although some users complain that due to a failure with such a number, they cannot restore their iPhone.
If you are experiencing Issue 47, there may be several reasons for it:
- Breakdown of the microcircuit of the modem part.
- Failure of the modem processor.
- Liquid penetration into the modem part.
As you can see, error 47 is related to a hardware problem. Therefore, if you encounter Fault 47 while restoring iPhone, take your mobile device to a service center. Even the master does not immediately determine the exact reasonthe appearance of a problem with number 47, so it is better not to risk it trying to repair it yourself.
Communication errors (1671, 3004, 3014, 3194)
If upon recovery iPhone iTunes displays a message with the numbers 1671, 3004, 3014, 3194 or 9006, then you are dealing with problems that prevent the computer from establishing a connection with the Apple server or mobile device. If you encounter problems 3004, 3014 3194, 9006, try restarting your computer first. If that doesn't work, close applications that are running in backgroundleaving only iTunes. Disable your firewall and antivirus. Since failures with numbers 3004, 3014 3194, 9006 occur due to the inability to establish a connection to the server, disabling the firewall will help remove the protective shield. 
If these methods do not help to get rid of errors 3004, 3014 3194, 9006, then try the following methods:
An extra entry will end with gs.apple.com. If you find one, delete it immediately and save hosts file... After edits hosts Crash messages 3004, 3014 3194, 9006 should no longer appear when restoring iPhone. If problems with numbers 3004, 3014 3194, 9006 appear when restoring iPhone to mac computer, then open hosts through the terminal using the command "sudo nano / private / etc / hosts".
If iTunes displays error 3194, when the recovery line is 2/3 full, then with a high degree of probability you have encountered a hardware problem - a damaged modem or an iPhone power module.
If the device cannot be restored due to problems with the modem, please contact the service center for assistance, as you will not be able to fix the problem yourself.
Errors 14 and 4005
IPhone recovery crashes with numbers 14 and 4005 usually occur when problems are detected with a device connected via USB. Error 14 indicates that during the restore process iTunes detected a violation of the integrity of the firmware file. Failure 4005 usually indicates that there is some kind of cable or port problem on the computer. 
To fix error 14 or 4005:
- Use original cable from the iPhone.
- Connect the device to a different port. Try to use the connectors located on the rear panel system unit, then you will give less chance of errors like 14 and 4005.
- Connect iPhone to another computer.
If error 14 or 4005 persists, try putting your phone in DFU mode before restoring. If this does not fix crash 14 or 4005, download the firmware manually and select the desired ipsw file by holding down shift key when you click the "Restore" button. 
Errors with numbers 14 and 4005 appear when trying to update the firmware by jumping through the version (for example, from iOS 7 right to iOS 9). To avoid problem 14 or 4005, select suitable version firmware.
Error 21
Fault number 21 occurs when incorrect input device to DFU mode. To eliminate the cause of error 21, use programs like redsn0w to transfer the phone to DFU. 
Especially often the owners of iPhones, on which the jailbreak procedure was carried out, encounter failure 21. In addition, failure 21 can occur due to the fact that the battery is not fully charged. Accordingly, in order to fix the problem with number 21, you need to put the smartphone on charge. 
Users apple products very often face problems related to smartphones that stop turning on, freeze or give unfamiliar error codes. Some people believe that this is due to problems in the phone itself, but this is far from the case. In terms of quality, Apple smartphones are still considered the best, and error 4005 in iTunes and other malfunctions most often occur due to attempts to reflash the phone, incorrect updates and much more. Most often, the users themselves become the cause of such "discomfort". There are frequent cases when error 4005 in iTunes occurred due to the elementary ingress of moisture into the device.
When the malfunction occurs most often
Typically, any Apple product suffers from such “ailments”. Therefore, iPad owners also often complain that an unknown error 4005 has occurred in iTunes. This usually happens if:
- The iPad or phone unexpectedly lost connection with the computer OS during the software update process.
- The download packages were corrupted or not completely installed.
- The media player program data has been corrupted through the PC operating system registry. This is usually due to manual removal utilities or some files.
- A virus or other malicious software has entered the computer system.
- A broken USB cable was used. The manufacturer recommends using only original products.
- A short circuit has occurred inside the phone. This sometimes happens when the device overheats or is suddenly overcooled.
- The iPhone was damaged. Very often, after a fall on phones, some modules are disabled. Not only the touch panel and display may be damaged, but also the motherboard.
- The battery is out of order.
- There has been a breakdown software.
- A defective device was purchased.
By and large, anything can be the cause of a device failure. Let's consider the most common methods of dealing with a malfunction.
Restart iTunes
The easiest way is to connect your iPhone to your PC, exit the media player, and restart it. However, this will only work if iTunes error 4005 was caused by a temporary program crash. If the media player still doesn't work, you need to try other methods. For example, you can try to update your media player.
ITunes update
To perform this action on Mac OS:
- Go to the iTunes menu.
- Select "Check for updates" from the list and start this mode.
- Wait until the files are downloaded.
If we are talking about Windows OS, then you need to follow the same steps. The only difference is that you need to select Check for Updates.
Restart your computer
If iTunes still appears on iPhone 5S or other device models, the problem may lie in the PC itself. To fix the problem, just try restarting your computer and try to reactivate the media player.
Restart your phone
If a unknown error 4005 in iTunes is still a concern, and more serious measures should be taken to fix it. This requires:
- Find 2 buttons on the phone: Power and Home.
- Clamp them at the same time.
- Wait about 10 seconds until the iPhone screen goes blank.
- Switch on the phone.
In most cases, this will fix the problem. If error 4005 still occurs when restoring iTunes, then you will have to take more serious measures.
Fast phone recovery
Before restoring your phone, be sure to back up all important data and files from your device. Otherwise, there is a risk of losing all information, pictures and audio recordings.
- Connect a mobile gadget to a PC or laptop via a USB CABLE.
- Select your iPhone from the list of devices that appear on the screen.
- Press the restore button.
- Wait until the end of the process, which may take several minutes.
The device will automatically recover the system, after completing the procedure, it will reboot and the problem will be corrected.
Other errors in the iPhone 5S
An iPhone 5S user should keep in mind that by quickly solving the problem with error 39, he is not immune from other malfunctions with the device. In order to cope with the task on your own, saving a lot of money, you need to have a general idea of \u200b\u200bwhat to do in a given situation. The following describes other most common errors that sometimes occur when Apple devices are working.
Difficulty connecting to the Internet
They are caused by the current software load by the aytyuns utility. In any case, the user must wait for the process to complete and then try to connect to the network again.
If the error occurs again, it means that the PC or laptop could not connect to the Apple servers or to the iPhone. In such a situation, the user must:
- check for a connection between the aytyuns utility and the Apple update servers;
- see if extraneous PC security software is interfering with the successful connection of the iPhone to the network.
Problems connecting with a USB cable
When such problems appear, errors 4005, 4013 or 4014 pop up. Apple offers the following algorithm of actions to eliminate them:
- Connect the gadget to a PC or laptop using the supplied cable (or another original USB cable).
- : You need to plug the cable into a different USB port, but not on the keyboard.
- Connect the device to another PC or laptop.
- The problem should be solved, if this does not happen, you need to check the health of the hardware, the work of other programs (especially antiviruses), contact the Apple customer support department directly.
If the software is at fault ...
This is signaled by errors 53, 27, 1014 and many others. And again, the manufacturer himself offers instructions for eliminating them.
To troubleshoot the software, you need to complete the following steps:
- Reopening the aytyuns program (in a situation when it was open, you need to close it, and then restart it).
- Check that the utility installed on the PC is the latest version. If not, you need to update the version to the most recent one.
- See if security software is interfering normal work iPhone.
- Check the health of a USB cable, Internet, PC or laptop.
- Make another 1-2 attempts to restore the system.
If none of the above methods helped fix the problem with software equipmentit is possible that there are many programs installed on the computer, the drivers of which are outdated and in need of an urgent update. The user will have to carry out painstaking work to identify such programs. But if everything turns out to be in order, there will be only one thing left - contacting the Apple customer support department.
How to check if the software is out of date
Old versions of programs or, even worse, modified programs that have become such as a result of a hack, can cause many errors in the operation of the iPhone 5S or other versions of the gadget. The so-called unauthorized modifications of iOS are very common causes of malfunctioning of smartphones from Apple. To put it simply, it is a firmware hack carried out by hackers to access user data.
But this kind of problem is not always serious and requires expensive repair or replacement of the gadget. For example, when the owner of the device tries to install an earlier version of iOS (downgrade) on the device than he had before, an error will always pop up. The solution in this situation is simple: you need to update the aytyuns utility to newest version, and then start the recovery process. The latest version will be downloaded and installed on the iPhone operating system, and the device will work without interruption.
When working with iPhone and iTunes, users occasionally encounter various errors. Some can be fixed on their own, but there are problems that cannot be eliminated without the help of specialists.
Such a failure, for example, is error 53, which appears after trying to update or flash the iPhone. The problem may be caused by damage to the Touch ID button or ribbon cable. Another possible option is to replace the Touch ID button. Each button has an individual number and is tied to the processor of a particular device, so after replacing the iPhone scanner it will not work.
If only the loop is damaged, you can take the phone for service so that specialists can replace it. If the Touch ID button itself is out of order, it remains only to change the iPhone to a new one.
Errors in iTunes
Crashes often occur when using iPhone via iTunes. The solution to the problem is not always obvious, so the owners of Apple phones will definitely need a manual for correcting various errors.
Error 0x666D743F
The reason is a file conflict when launching iTunes.
The solution is to open the QuickTime settings and on the Audio tab enable Safe Mode».
Errors 0xE8000001, 0xE8000050
The reason is iTunes' inability to install applications on the iPhone.
- Updating iTunes up to date.
- Jailbreak your phone (if jailbroken applications are installed).
Error 0xE8008001
The reason is wrong digital signature applications (usually hacked).
The solution is to jailbreak the iPhone, install the AppSync patch from Cydia.
Error 0xE8000013
The reason is a failure in synchronization.
Error 9
The reason is a crash in the iOS kernel. Similar to the Windows blue screen of death.
The solution is to find another unofficial firmware, using only official firmware.
Error 11
The reason is the lack of BBFW in the firmware.
The solution is to re-download the firmware, add the missing file using the archiver.
Error 13, 20 **
Cause - using a damaged cable or uSB port.
The solution is to replace the cable, use a different port, connect to another computer.
Error 14
The reason is a failed jailbreak or a damaged USB port.
Solution - replacing the USB port, flashing the device.
Error 17
The reason is the update of the unofficial firmware to a different version.
The solution is to use DFU mode when flashing the phone.
Error 20
The reason is the inability to reflash the iPhone in recovery mode.
The solution is to put the smartphone in DFU mode.
Error 21
The reason is the operation of the IPSW check mode, which is critical when using an unofficial firmware.
The solution is to install custom firmware using PWNed DFU.
Error 23
The reason is most likely a technical problem. It is also possible that you are unable to determine the IMEI and MAC address.
Error 26
The reason is the NOR mismatch with the current firmware version.
The solution is to use a different firmware.
Errors 27, 29
The solution is to update iTunes.
Error 28
The reason is a faulty 30-pin connector on the iPhone.
Error 35
The reason is incorrect access rights to the folder with the media library (typical for Mac OS).
- Start a terminal.
- Enter the username.
- Run the command "sudo chmod -R 700 Users Music iTunes iTunes Media".
Error 37
The reason is the presence of LLB (initial bootloader) in the firmware from another gadget.
The solution is to use a different custom firmware with the correct LLB.
Error 39
The reason is problems with the photo album or Internet access.
- Create a new photo album.
- ITunes update.
- Disable antivirus and firewall.
Error 54
The reason is the inability to copy the application from the smartphone. Often appears when copying cracked programs.
- Authorize your computer to the iTunes Store. Open the "Store" tab and click "Authorize".
- Go to Settings - Synchronization and click "Reset sync history". Then clear the C: Documents and Settings / All Users / Application Data / Apple Computer / iTunesSC / Info folder. Re-authorize the computer.
- Move the Music catalog from your library to another location. Sync iPhone with iTunes, then put the folder back in place.
Errors 306, 10054
The reason is problems with access to the network.
The solution is to disable proxy, firewall, antivirus.
Error 414
The reason - the downloaded content belongs to the 18+ category.
The solution is to change the year of birth in the profile.
Errors 10 **
The reason is the firmware to an old version or an update to an inappropriate modem.
- Start TinyUmbrella.
- Click "Kick Device Out of Recovery".
- Please use a different firmware.
Error 1008
The reason is incorrect system encoding. iTunes does not recognize characters in Apple ID.
- Open the Store tab, click View Account.
- Click "Exit" if everything is entered correctly, or make changes.
- Switch the encoding to UTF-8 or Win5112 and then log in again.
Error 1015
The reason is a failure when checking the firmware.
Solution - Erase Apple server information from C: / Windows / System32 / drivers / etc / hosts or etc / hosts file on Mac OS. If the error appears when trying to downgrade, use the previously saved SHSH.
Errors 14 **
Errors 16 **
The reason is the firmware verification system is in effect.
The solution is to jailbreak or use PWNed DFU.
Errors 1600, 1611
The reason is the incompatibility of the unofficial firmware with the DFU mode.
The solution is to use Recovery Mode to flash or download a different version.
Error 1619
The reason is the incompatibility of iTunes and smartphone.
The solution is to update iTunes.
Error 1644
The reason is problems with reading the firmware file.
Solution - make sure the firmware file is not being used by other programs. Reboot your computer.
Error 2005
The reason is damage to the iPhone, the request is not confirmed.
The solution is to go to the service center.
Errors 3000, 3999
The reason is the inability to contact the Apple server.
The solution is to disable firewall and antivirus, or open ports 80 and 443 and add gs.apple.com to the list of exceptions.
Errors 3001, 5103, -42110
The reason is problems with hashing video files.
- ITunes and QuickTime update.
- Removing the SC Info folder from your computer.
Errors 3002 and 3194
The reason is problems with access to the gs.apple.com server due to the changed or missing stored SHSHs required to install an older firmware version.
Solution - sometimes the servers are just overloaded, so you just have to wait a little and try again. ... Make sure you are flashing to the latest iOS version. If you are downgrading (downgrading), make sure to save SHSH.
Error 3004
The reason is there is no internet access.
Solution - connect your computer to the internet. Disable your firewall and antivirus.
Error 5002
The reason is problems with the payment.
Solution - erase card information from Account Billing Information, download any free application and add the card again.
Errors 8008, -50, -5000, -42023
The reason is iTunes' inability to write the file to disk.
Solution - delete the folder:
- Music iTunes iTunes Media Downloads on Mac OS X.
- C: Users / Username / My Music / iTunes / iTunes / MediaDownloads on Windows.
Then go to the Store tab and click Check Available Downloads.
Error 8248
The reason is a conflict between iTunes and the Monitor.exe process. (occurs extremely rarely on Windows).
The solution is to terminate the Monitor.exe process and remove all applications that use it.
Error 9006
The reason is a problem loading the firmware. Possible blocking by firewall or antivirus.
- Refresh iTunes, disable firewall and antivirus.
- Use firmware downloaded from Apple website or other trusted sources.
Error 9807
The reason is problems with verifying certificates and firmware signatures.
The solution is to disable the firewall or add evintl-ocsp.verisign.com and evsecure-ocsp.verisign.com to the exceptions.
Error 9808
Follow the path to iTunes "Start - Control Panel - Internet Options - Advanced". Check the boxes next to SSl3.0 and TLS 1.0.
Error 9813
The reason is problems with the Keychain key files (typical for Mac OS X).
The solution is to clear the Safari cache, copy the X509Anchors SystemRootCertificates.keychain and SystemCACertificates.keychain files to the System / Library / Keychains X509Anchors directory. Working files can be copied to any Mac with a similar OS version.
Error 13001
The reason is the corruption of the iTunes library. Often occurs when using external storage for storing media files,
The solution is to delete the corrupted Library.itl file. After launching iTunes, it will be recreated.
Errors 13014, 13136, 13213
The reasons are problems with iTunes.
- Restart your computer.
- Disable your antivirus and firewall. Close and re-launch iTunes, re-sync.
- Disable Genius in the iTunes sidebar.
- Upgrading iTunes to latest version.
Error 13019
The reason is problems with the media library.
- Find out what kind of information the error appears when synchronizing. Exclude content when syncing.
- Move the iTunes Library file to a different folder and try syncing again. If the failure does not appear, put the file back in place.
Error -39
The reason is that the purchased music cannot be downloaded.
The solution is to update iTunes and QuickTime. Disable web accelerators, restart your computer.
Error -50
The reason is problems when connecting to the Apple server.
The solution is to disable antivirus and firewall or add itunes.apple.com and ax.itunes.apple.com addresses to the exceptions.
If an error occurs while downloading a video, find the problematic file with the * .tmp extension, delete it and start downloading again. The file is stored in the folder:
- C: / Users / username / Music / iTunes / iTunes / Music Downloads on Windows.
- HomeDirectory / Music / iTunes / iTunes / Music Downloads - Mac OS X.
Error -3221
Cause - iTunes inability to connect to servers iTunes Store.
The solution is to change access rights to everyone, permission to send data.
Error -3259
The reasons are problems connecting to Apple servers.
Solution - Sign out and sign in to your iTunes account. Refresh iTunes, clear the list of active downloads. If that doesn't work:
- Press Win + R, run "msconfig".
- Check autorun for iTunes and QuickTime.
- See if AppleMobileDevice and iPod Service are listed.
- Disable your antivirus and firewall.
Errors -9800, -9812, -9815, -9814
This is because the system time is different from the iTunes Store time.
The solution is to set the current time.
If any errors cannot be eliminated on your own, it is recommended to contact the service center so as not to aggravate the situation.
Over the past few years, Apple has released all sorts of updates for its own devices. However, to use completely free versions software, installing them on your own iPhone is not an easy task. In most cases, mobile devices can inform the user about the problem during updates, and then it will become much more difficult to cope with the problem than before. Naturally, various kinds of failures that have arisen when restoring or updating the device are a serious nuisance, however, no one is immune from them.
This article will tell you about Error 9006, which pops up in iTunes in the process of updating the device - an iPhone (iPhone). Often this problem appears in aytyuns if the developers third party applications they provided not very high-quality content for use. Perhaps even the updates from the developers had flaws, due to which a significant problem arose during the update.
Symptoms of Error 9006 iTunes
The very first signs by which you can be sure that error 9006 is present will be a problem with running iTunes utility on your computer. And also there may be a problem with the entrance to the official app store - App Store (iTunes Store). Some people also complain that they have not even been able to create backups, perform the synchronization process and perform many necessary manipulations related to the device - iPhone. 
The first way to fix the problem
In particular, a simple, correct update can help fix issues that have appeared on the iPhone (including the fix for error 9006). However, in order to perform all the steps correctly, you must follow the tips below:
- Set the correct date and current time on the computer;
- Find out if you have administrator rights on the computer during the device update;
- to the most current version for today;
- Update Windows components;
- Update the software responsible for security;
- If there is a need, reconfigure this software (antivirus);
- Turn off the anti-virus program for a certain time and repeat the update process;
Error 9006 can also appear due to the fact that a special entry is added to the registry, which is called TcpWindowSIze. It is she who changes the package size in the operating system and this serves as conflicts, due to which error 9006 occurs in iTunes.
The second way to fix the problem
If the performed actions did not give a result and it was not possible to cope with the problem that arose, then you must perform the following actions:
- Check if the connected network has access to ports such as: 80 and 443;
- Make sure that access to update resources has not been blocked by Windows Defender or any other security utilities;
- Delete the .ispw file and try updating again;
- Perform the update process using a different computer (laptop).
With various processes occurring in Apple devices, errors may occur that prevent the normal operation of the system. We are talking about the processes of synchronization, updating and restoration - those actions that the user performs more often than others. Some errors are very easy to fix, for example, by a simple reboot, while others are eradicated solely through repair.
Error 39 is familiar to almost every iPhone user. It usually occurs when a gadget interacts with the aytyuns utility. How do I remedy the situation if the display shows error 39? This article provides several reliable ways to solve this problem.
Before proceeding to a detailed consideration of the essence of error 39, let's consider what types of errors can occur when performing various processes through aytyuns. These are errors like:
- problems with the Internet (error 17, 3013, 3194 and many others); arising when it is impossible to connect a PC or laptop to Apple servers.
- difficulties with configuring security programs, such as antiviruses and others (error 2.4, 9006, etc.);
- inability to connect a mobile gadget via a USB cable to a PC or laptop (error 1601, 2001 and others).
- difficulties caused by malfunctions in the software part of the device, with an iPhone modem, battery, etc. (error 1, 23, 35 and many others).
Above were listed the main groups of errors that occur when an iPhone user works with the Internet and the aytyuns utility, or rather, when he performs operations to update or restore the operating system of the device. There are many more such errors, but some are common, others are extremely rare. Error 39 belongs to one of the most common mistakes. The ways to eliminate it will be discussed in detail below. And now - about the standard approach to getting rid of absolutely any mistake.
One-Stop Way to Get Rid of Error in iTunes
As practice shows, most users cope with system failures iPhone independently, without contacting service centres for the repair of mobile gadgets from Apple. Since more often than others there are difficulties in the interaction of the device with the aytyuns utility, you should dwell on the method of solving them in more detail. There is a single algorithm of actions that allows you to eliminate, if not all, then many problems (including, sometimes, error 39).
Stages of error elimination according to a single algorithm:
- On a PC or laptop, the user must remove all utilities and programs that may interfere with the connection between iTunes and Apple servers.
- During the procedure, you must turn off all security programs.
- Connect iPhone to PC or laptop using USB cable.
- Using anti-installers, completely remove aytyuns from your PC, and then re-download and install the latest version of this utility.
- Restore or update an iPhone on another device (PC or laptop).
If the user does everything correctly, which is not difficult at all, since the algorithm of actions described above is quite clear and understandable to everyone, the problem should be eliminated. But sometimes this method does not help. This often happens with error 39. How can I fix it? See below for details.
Error 39 when updating iPhone 5S
When exactly does this error occur? Most often, when syncing or when restoring an iPhone using aytyuns. During the update of the operating system, it may also appear. It can also be called damaged fileswhen the system detects them during synchronization with aytyuns. The problem can occur on device version 4, iPhone 4s, iPhone 6 and other models of smartphones from Apple.
Error syncing with iTunes: solution
During synchronization, the aytyuns utility generates folders to be deleted. These are folders such as iPad photo cache and Apple TV photo cache. The named folders store pictures optimized for the user's iPhone.
To delete the Photo Cache folder on Mac, follow these steps:
- In the Finder section, select Go and then Home
- Go to Pictures, find there a folder that has a connection with an iPhone.
- Go to the device.
- Next, find folders like ipad photo cache and apple TV photo cache and move them to the trash.
- You don't need to delete or modify any other files.
- Connect the iPhone to a PC or laptop and try to synchronize the device with aytyuns.
Attention! By deleting the named folders, the user's photos stored in the iPhone will not be lost. The cache folders will be restored the next time the aytyuns is connected to the iPhone.
To delete the photo cache folder on Windows you need:
- Press the Windows key on a PC or laptop.
- Select the magnifying glass icon or enter the search.
- Introduce english letters "IPad photo cache" or "Apple TV photo cache", click on search.
- The system will carry out a search, after which you need to select the desired folders and drag them to the trash.
- Again, you do not need to delete any other file or folder, nor do you need to change them, as this can disrupt the entire system.
- Try to connect the iPhone to a PC or laptop and synchronize with aytyuns.
Error 39 and other reasons for its appearance
The essence of the problem may lie in the date and time settings, so they need to be carefully checked.
In order to check these settings, you need to perform such actions as:
- Searching for the cpl file.
- Press the button to change the time zone, select the desired zone.
- Confirm your action by pressing the corresponding button.
- Enter the section for changing the date and time.
- Set correct time and date values.
- Confirm your decision.
If a previous way did not help, perhaps you should make an aytyuns exception in the firewall. It happens that this program prevents aytyuns from connecting to the Apple servers. To solve the problem and fix the error in this situation, you need to enable aytyuns in white list Windows firewall.
Instructions how to do it
- Log in to the control panel and select all of its elements, go to the firewall section, and then to the allowed programs.
- Select aytyuns in the list of programs and applications that opens.
- Click on "Okay".
You can also try to synchronize all the elements, the essence of which is the subsequent resynchronization. To carry out the procedure you need:
- Connect iPhone to PC or laptop.
- Choose your gadget, go to the photos section.
- Remove all elements from thumbnail images.
- Confirm their deletion.
- Re-sync.
Perhaps a number of programs conflict with each other and this caused error 39? And here is the solution. You need to run any utility for virtualization and detect such conflicts in order to eliminate them further.
Update aytyuns and get rid of error 39
To keep the error to a minimum, you need to install the latest version of the aytyuns utility on your PC. To do this, the user must press the "Alt" key and select help in the menu bar that appears, and then check for updates.
If a new version of the aytyuns utility has already been released, you need to install it on your PC, through which you usually interact with the iPhone.
If none of the above methods helped to resolve error 39, another simple method can help - connecting the device to a different USB port. The fact is that due to a malfunction of the port or damage to the cable, such problems can arise.
IPhone recovery
This process can also help in eliminating error 39. To do this, you need to reset all settings to factory settings, while all user data and files will be irrevocably erased. Therefore, you need to regularly take care of backups.
To carry out the procedure for restoring the device with iOS firmware, need to:
- Connect a mobile gadget to a PC or laptop via a USB CABLE.
- Select your iPhone from the list of devices that appear on the screen.
- Press the restore button.
- Wait until the end of the process, which may take several minutes.
The device will automatically recover the system, after completing the procedure, it will reboot and the problem will be corrected.
Other errors in the iPhone 5S
An iPhone 5S user should keep in mind that by quickly solving the problem with error 39, he is not immune from other malfunctions with the device. In order to cope with the task on your own, saving a lot of money, you need to have a general idea of \u200b\u200bwhat to do in a given situation. The following describes other most common errors that sometimes occur when Apple devices are working.
Difficulty connecting to the Internet
They are caused by the current software load by the aytyuns utility. In any case, the user must wait for the process to complete and then try to connect to the network again.
If the error occurs again, it means that the PC or laptop could not connect to the Apple servers or to the iPhone. In such a situation, the user must:
- check for a connection between the aytyuns utility and the Apple update servers;
- see if extraneous PC security software is interfering with the successful connection of the iPhone to the network.
Problems connecting with a USB cable
When such problems appear, errors 4005, 4013 or 4014 pop up. Apple offers the following algorithm of actions to eliminate them:
- Connect the gadget to a PC or laptop using the supplied cable (or another original USB cable).
- : You need to plug the cable into a different USB port, but not on the keyboard.
- Connect the device to another PC or laptop.
- The problem should be solved, if this does not happen, you need to check the health of the hardware, the work of other programs (especially antiviruses), contact the Apple customer support department directly.
If the software is at fault ...
This is signaled by errors 53, 27, 1014 and many others. And again, the manufacturer himself offers instructions for eliminating them.
To troubleshoot the software, you need to complete the following steps:
- Reopening the aytyuns program (in a situation when it was open, you need to close it, and then restart it).
- Check that the utility installed on the PC is the latest version. If not, you need to update to the latest version.
- See if security programs are interfering with the normal operation of your iPhone.
- Check the health of a USB cable, Internet, PC or laptop.
- Make another 1-2 attempts to restore the system.
If none of the above methods helped to fix the problem with the software, there may be many programs installed on the computer, the drivers of which are outdated and need an urgent update. The user will have to carry out painstaking work to identify such programs. But if everything turns out to be in order, there will be only one thing left - contacting the Apple customer support department.
How to check if the software is out of date
Old versions of programs or, even worse, modified programs that have become such as a result of a hack, can cause many errors in the operation of the iPhone 5S or other versions of the gadget. The so-called unauthorized modifications of iOS are very common causes of malfunctioning of smartphones from Apple. To put it simply, it is a firmware hack carried out by hackers to access user data.
But this kind of problem is not always serious and requires expensive repair or replacement of the gadget. For example, when the owner of the device tries to install an earlier version of iOS on the device (downgrade) than he had before, an error will always pop up. The solution in this situation is simple: you need to update the aytyuns utility to the latest version, and then start the recovery process. The iPhone will be loaded and installed with the latest version of the operating system, and the device will work without interruption.
One of the main reasons why iTunes might not be able to communicate with Apple servers and hence the iTunes error 9006 manifest has a lot to do with Anti-Virus on your computer. This is because many antivirus software may create a firewall that may prevent the download of firmware required for iPhone updates iTunes.
Therefore, it is not surprising that for most people, the problem is easily fixed when they just minimized their Anti-Virus. To do this, simply click on the icon representing the antivirus software you are using in the taskbar and then uncheck the box next to "Enable real-time protection" or its equivalent.
After that, go back to iTunes and try updating your iPhone again. it's the same a good ideato check the connection, since bad internet the connection can cause the same problem.
Your the best choicewhen it comes to recovery iOS systems
If you just want to update your device to the latest iOS version, or you just wanted to fix software problems with your device, there is one tool that everyone who owns an iOS device should have. This tool is Dr.Fone - iOS System Recovery that is specially designed to fix many problems iOS deviceslike error 9006, iTunes error 9006 and so on. Here are just a few of the things the program can do.
How to Use Dr. Fone to Fix iTunes Errors 9006
Before we start, download and install the program on your computer. We should also let you know that if your device is jailbroken, it will be updated to non jailbroken status after this process. Also if it was unlocked it will be relocked.
Step 1: launch the program on your computer and then select " iOS recovery systems "from the section" Additional tools". Then proceed to connect your device to your computer using uSB cable... The program will detect the device. Click the Start button to continue.
Step 2: As part of the restore process, the latest firmware should be installed on your device. Dr. Fone provides you with the latest iOS. Just click the Download button and wait for the download process to complete.
Step 3: Dr.Fone will then start repairing your device immediately after downloading the firmware. After a few minutes, the device will reboot normally, update to the latest iOS version and work normally again.
If you ever have iTunes error 9006 you will be better off to fix the error 9006 iPhone problem. You can also just use Dr.Fone to control your device and fix any iOS issue without having to restore it to iTunes.
