Connect the USB flash drive to your computer and open "My Computer". By the way, you can do it faster if you press the Win + E (Latin E) keys.
Right-click on the desired USB drive and select context menu "Format".
This makes it difficult to work on modern computers. This gives strength to flash drives with less memory, which are used to transfer small files. If you do not convert file systemu and not trying to copy large files, it will show an error. If you have data on your hard drive or flash drive, and you do not want to manipulate it. Make sure you do it correctly and the connections are intact. A little negligence can lead to deletion or loss of data or even to the entire section.
However, a formatted disk with a file system is possible with some tools. But it is recommended to avoid this and keep your data intact. To do this, follow these steps. Select "Open as administrator" to open the window command line.
By default, the FAT32 file system will already be specified, and all that remains to be done is to click the “Start” button, answer “OK” to the warning that all data on the disk will be destroyed, and then wait until the system reports that formatting is complete. If writes “Tom is too big for FAT32”, we look at the solution.
FAT32 limitations in Windows
The conversion process takes some time if it has a large amount of files. This is done without loss of data or hard formatting disk. But in most cases it is recommended to format the disk and then convert the format of the file system.
When performing this procedure, the disk will be formatted. So make sure you back up all your data on your hard drive or flash drive. If you format a disk and give it a file system format, it will be called reformatting the disk. Connect hDD or flash drive to computer.
If for some reason the FAT32 file system is not displayed in the formatting dialog box, proceed as follows: press the Win + R buttons, enter CMD and press Enter. In the command window that opens, enter the command:
Format / FS: FAT32 E: / q
Where E is the letter of your flash drive. After that, to confirm the action and format the USB flash drive in FAT32, you will need to press Y.
It makes very few unnecessary entries and stores files all over the disk to maximize longevity and speed up the transfer. It makes a lot of additional disk entries and, as a dynamic file system, can also write without your knowledge. If one of these operations occurs and the disk is ejected, damage and reformatting are required to correct the situation, but your data will be lost.
Before you get started, be sure to create backups of all data. Reformatting will erase the disk, therefore backup to another device is vital for storing your data. Once it is recognized, open your standard explorer.
Video instruction on how to format a USB drive in Windows
If after the text above something remains unclear, here is a video in which the flash drive is formatted in FAT32 with two different ways.
How to format a USB flash drive in FAT32 on Mac OS X
Recently, in our country, there are more and more owners of Apple iMac and MacBook computers with operating mac OS X (I would buy too, but no money). And therefore it is worth writing about formatting a flash drive in FAT32 in this OS:
Find the disk under the computer. A dialog box opens with formatting options. In the File System drop-down list, select the format you want. Some may find that this method is easier or more intuitive, but it simply dials commands, rather than uses tools in your conductor.
Insert the disc and make sure it was found. As in our previous steps, backup is still necessary to save your data. Open a command prompt. Using these methods, you can optimize the flash drive format or save some equipment that showed the best days.
- Open the disk utility (Launch Finder - Applications - Disk Utility)
- Select the USB flash drive to format and click "Erase"
- In the list of file systems, select FAT32 and press delete, wait until the procedure is complete. Do not disconnect the USB drive at this time from the computer.
How to format a USB disk in FAT32 in Ubuntu
To format flash drives in FAT32 in Ubuntu, search for “Disk Utility” or “Disk Utility” if you are using english interface. A program window will open. In the left part, select the connected USB flash drive, then using the button with the “settings” icon, you can format the USB flash drive in the format you need, including in FAT32.
Please help me solve this problem, thanks. After this incorrect operation, information about the type of the file system may be lost or the system tables may be damaged. There is no recognized file system on the disk. It also has more advanced features for professional users, such as converting dynamic disks to primary disks, distribution free space from one section to another and much more.
Formatting with standard tools
So you can get my information, such as music, files, photos, etc. The time required to access the disk and save information. Both programs are installed as any program and access to the disk, as if it were any disk installed on the computer.
It seems, told about all the most likely options in the formatting procedure. I hope someone finds this article helpful.
Today we will talk about formatting a flash card. This process is very simple and many users are well aware of how to do it. True, there are some peculiarities here. For example, a flash drive can be formatted in one of the two most popular file systems: FAT32 or NTFS. The first file system is earlier and has some drawbacks. For example, it does not allow copying files to a flash drive with a capacity of more than 4 GB. Therefore, it is usually recommended to produce formatting in NTFS. Let's start in order.
The disadvantage is that there is no way to search in search engineand it does not show us icons or thumbnails of files. That is, you must enter a folder by folder to find information. In some cases, you may need to select a device in the drop-down menu. Usually in section number 2 is the entire operating system and our files.
Simply: download, run, select a device, activate the quick format and run. Flash memory, flash drives, cards and others portable devices very useful in carrying with you the information that we want to have on hand, from any device that can read it. To do this, you must have a file system that the operating system can understand so that in this way we can work with memory blocks.
How to format a USB flash drive in FAT32?
I want to immediately note that I will use only standard features operating system Windows to third-party programs I will not resort, because I do not see any point in this.
So let's go.
First of all, we connect our USB flash drive to the computer and wait until it appears. After that, click on the object with the right mouse button and select the "Format" item.
Depending on the use we are going to make, it’s convenient that we know which file system we should provide to the memory block through formatting. Remember that every time we format a block of memory, all the data stored in it will be lost, and we can also use it to assign the required file system.
How to format a memory block
From there, we find the device and clicking on it with the right mouse button, we select the "Format" option. This will open a window in which we will find information with capacity, size of distribution block, volume label or file system, which we are interested in about this.
The system tells us that the data on the removable device during formatting will be deleted. You must agree to this condition by clicking the OK button. ATTENTION! If there are important data on the flash drive, transfer them to another directory, since it will be extremely difficult to restore them!
The process is running.
After the flash drive is formatted, you will see a window with the appropriate inscription.
That's all, you can check the file system of the flash drive using the "Properties" item.
But that's not all - you can format a removable disk using the command line! To do this (click the “Start” button, type cmd in the “Search programs and files” line. A shortcut will appear at the top of the window. Right-click on it and select “Run as administrator”).
After you see the command line in front of you, enter the command
format / FS: FAT32 I: / q
- FS: FAT32 - file system
- I: - letter flash drive
- q - silent mode
The flash drive is formatted.
How to format a USB flash drive in NTFS?
Now we proceed to formatting the flash drive in NTFS. Actually, the main process will be similar.
We connect the USB flash drive to the computer, go to the "Computer", select the removable disk, click on it with the right mouse button and select the "Format" option.
Now, as the file system, select NTFS and click on the "Start" button.
The system tells us that all data on the disk will be destroyed. If the flash drive has the necessary data, transfer it to another location, then click OK.
At the end of the process, you get an inscription that the formatting is completed.
Now we go into the properties of the flash drive and see that the file system we now have - NTFS.
To format a USB flash drive in NTFS using the command line, you can use the instructions above with the difference that you need to enter the command
format / FS: NTFS I: / q
- FS: NTFS - file system
- I: - letter flash drive
- q - silent mode
I will not repeat, it is better to tell you how to convert the FAT32 file system to NTFS without data loss (without formatting the flash drive).
Run the command line as administrator and write the command
convert I: / FS: NTFS
- I: - letter flash drive
Press the Enter key and wait for the file system to be converted - it may take some time.
Conversion complete. Open the USB flash drive and see our files there. Check file system - now NTFS. And yet I recommend copying files from a flash drive before the procedure - if something goes wrong, they can be destroyed.
If you have questions on the topic, you can ask them using comments.
