Apple Watch freezes when creating a pair. The amount of internal memory in Apple Watch. Frequent problem not to turn on iwatch

Full computer on your wrist. This small device knows how much and its ability is constantly expanding. Below you will find a small list of tips and information that will be useful when you start working with Apple clock.

Connect Apple Watch to iPhone

To begin with, check whether Bluetooth is enabled on. Connect the clock to the network to recharge. Turn on Apple Watch. (Press and hold the side button under the wheel Digital CROWN until the Apple logo appears). Select the language of the interface Apple Watch..

To create a pair between the clock and the phone:

Click "Start creating a pair";
Move the camera phone to the clock so that the Apple Watch display gets into the appeared on iPhone screen yellow contour;
The clock will connect to the iPhone and you will continue to either configure the clock as new (or restore a copy of the backup if you have already enjoyed the clock and made backups);
Choose on what wrist you will wear a clock;
Agree with the terms of use of iTunes;
Specify your Apple ID;
Click "OK" on the following 3 pages with information about location services, "siri" and diagnostics;
Set the password. Password must be specified on Apple Watch;
Specify whether you want to unlock the clock at the same time with the iPhone;
Select the application installation method. If applications on your iPhone have versions for watches, they can all be installed automatically, or you can later install only the programs you need yourself;
Wait for the device synchronization.

How to manage Apple Watch

Apple Watch Management is carried out using one physical button, wheel "Digital Crown", touchscreen and voice assistant "Siri".

The button is used to call the "Friends" application and to turn on / off the clock. Wheel "Digital Crown" is a kind button Home.. By pressing the wheel is returned to main screen, double pressing returns to the last running applicationAnd the rotation "Digital Crown" changes the scale.

Apple Watch has become the first Apple device, the screen of which supports the "Force Touch" technology. This means that besides the usual touch and swipes (smooth movements of the fingers across the screen), the clock understand the power of pressing. Depending on how strong there was a touch, the clock is reacting differently.

It will help to send a message, call, add a meeting to the calendar and much more. To start "Siri" you need to hold the "Digital Crown" wheel.

Almost all device settings can be made using the Apple Watch application on your iPhone.

Shutdown / Restart Apple Watch

To turn off the clock:

Hold and hold the side button until the menu appears;
Select the desired action: shutdown, saving energy or blocking.

Important! If you select the energy saving mode, you can get out of it only when connected to the charger.

If the device hung up and does not respond to your actions, you slow down the side button and DIGITAL CROWN until the Apple logo appears.

How to create a screenshot

To take Apple Watch screen snapshot:

Clamp the side button;
Click and release the Digital Crown Wheel.

After this manipulation, a white flash will appear on the clock screen and the shutter sound will sound, and the ready screenshot will be added to the "film" of your iPhone.

Installing and deleting applications

Adding an application to hours can be divided into 2 stages: loading and installation.

For loading:

Open the Apple Watch application on the iPhone;
Go to the "Selection" tab;
Find you need the application and download it, as usual do it with iPhone applications;

For installation:

Open the Apple Watch application on the iPhone;
In the "My Clock" tab, scroll down the list down to the application you need;
Click on the name of the application;
In the menu that opens, activate the "Show Appe Watch" option;
Confirm the installation of the application on the clock.

To delete the program, you need to turn off the "Show Apple Watch" option or use the method familiar to all by working with the iPhone. Cress for a few seconds finger on the desktop Apple Watch, when all the icons start "shaking" click on the cross near the application to delete.

Changing the appearance of the dial

To replace and configure the dial, make the following:

Take a strong press on the installed dial;
With the help of swipes, select the desired dial.

If you want to additionally configure the dial, then click Customize. The dial setup menu consists of 3 pages: detail, color, additional information.
To move between pages, use swipes left or right, and use the "Digital Crown" wheel to configure / modify;
After completing the setup, click on "Digital CROWN".

Phones and other smart gadgets have long and firmly entered everyday life. This review will be particularly interesting for Apple's technique fans. It is dedicated to one of the most popular models among smart watches. We will analyze how to use the "Apple Watch" and several key points associated with the settings, how to connect "Apple Watch" to the iPhone, break the pair and not only.

What is worth considering

Some gadgets are fairly easy to use and do not need instructions in Russian. The interface is friendly and everything is intuitive. But, not in this case. Probably, every familiar fear when you use an expensive thing and long study the operating manual. To deal with Apple Watch, you do not have a few minutes. The device can be very discharged, you will need extra time.

First start

First minutes. The box is unpacked, before the user lies the instruction in Russian, magnetic charging, and what's next? Before using the gadget for the first time, it is strongly recommended to charge the battery. This guarantees its long-term work in the future.

The very first launch lasts more than a minute. Do not strongly scold the developers of "apple". The device is the first of its kind. The device itself is very small, therefore does not combine powerful "iron". In the future, the clock will be launched much faster.

Turning on

How to enable Apple Watch? To do this, simply click the side button on the sidebar

Activation

Activation occurs when the user raises the hand to look at the clock.

Setting

How to configure Apple Watch correctly? Setup includes items:

The clock battery must be fully charged;
Select language and install an application;
Selection of wrists;
Setting security settings;
Installing applications in manual or package in auto mode
Setting up dials
View device information;
Regulation of tractors and notifications;
Music configuration
Work organization.

Synchronization automatic mode

How to tie a clock to iPhone? Synchronization of the clock from "EPL" with an iPhone is performed automatically. For this:

On the screen are icons of applications. Select "Apple Watch"
To start the synchronization, click on "start creating a pair" on both devices
Yellow video detector iPhone must be combined with animation on the watch display
Once the creation of the pair is completed, a notification of the operation will appear on the iPhone screen. You need to click on the "Set up as new" Apple Watch "button
The system will ask, on what hand the owner plans to wear a clock, choose one of two options
Next requires consent to the rules and conditions of operation.
Enter data from account "Apple" (login and password)
The system will issue information on geolocation services. Check out it and click "OK"
Repeat the steps after you get acquainted with voice assistant "Siri"
After that, the diagnostic information will be displayed on the display.
Now you need to enter 4 liters 7-digit clock password
The system will propose to configure the simultaneous unlocking devices.
Can choose automatic installation applications, or set them yourself later
After performing all actions, the iPhone will receive a notification of the completion of the creation of a pair.

Creating a pair

How to configure Apple Watch with iPhone? Couple can be created by the user. How to manually sync Apple Watch with iPhone? I can imagine how many unrest causes this question. About everything in order.

Creating a pair is performed in several steps:

As in the first case, you need to click on the application icon
Touch the button "Start creating a pair"
At the bottom of the display, a manual installation option will be proposed. Select it and click on the button with the icon "I"
After the iPhone "sees" the clock, repeat steps from the fourth point of the past installation option
During the creation of a couple, both devices should be close to each other

Breaking a pair

If you want to break a pair:

Devices must be close to each other;
Go to "My Watch" Select the model and mark the letter I;
Break a couple.

If one of the devices is far

Go to the clock settings;
We choose the main;
Click on reset.

How to connect to a computer

How to connect Apple Watch to a computer:

Under a removable strap is a port through which you can connect to the PC using the cable.

If the clock does not turn on

Some users touch the question, what should I turn on the clock? In most cases, they simply require charging. If, after a long time, turn on the gadget never happened, contact the supplier.

Connect to iPad.

Connecting an iPad to Apple for a clock is no different from iPhone.

Hey! The article will be useful for those who have already decided to buy a clock from Apple or still looks close to the novelty. We will analyze the answers to the most popular questions that have accumulated quite a lot: what it is, where and how to buy how much they will cost, is it necessary to use the iPhone to use them, what can be useful to an absolutely conventional average person? There are many mysteries - there are no deposits yet. Let's try to fix it!

This post will be in the format question-answer. Some of them were received by mail from the readers of the site, some I found on the Internet. In general, sit down more comfortable and get ready to figure out everything that you wanted to know, but they were afraid to ask :)

Preliminary apple review Watch already here - went!

Main definitions

What about Apple Watch which everyone speaks?

Apple Watch is essentially a small computer, they can also be called " smart clock"That naturally need to wear on your hand. It has a huge number of functions, among which is the display of time and date, the ability to monitor health (passed steps, the number of calories, pulse), data synchronization with iPhone (contacts, SMS, notes, postal), payments (not in our country :( ), remote controller remote control and much more.

By the way, sometimes by mistake they are called iWatch. This name is unofficial and fictional.

So, Apple Watch is the same iPhone - only small and for wearing on your hand?

In principle, you can say so, but the most important thing is that the clock is primarily an addition for the iPhone. They are designed to make the use of the phone even more comfortable.

Apple Watch work under iOS option called Watchos. This operating system is specifically adapted (both in terms of energy consumption and in terms of ergonomics) for wearable devices. She has unique system Menu navigation recognizes the degree of clicking on the screen, there is also a dial replacement, heartbeat sensor, NFC sensor for Apple Pay. (Not relevant for Russia) and much more.

Do I need iPhone to use Apple Watch?

Yes, you will need iPhone 5th version and more actual models. The operating system also contains certain requirements - it must be iOS 8.2 or later. If the phone version is older, then you will not be able to create a "pair" from the iPhone and use most functions.

Can I use iPad or iPod with Apple Watch?

Unfortunately no, you will not be able to interface between the clock and iPad or iPod of any generation. At least it will not work at the moment.

When can I get a clock from Apple?

They will be on sale on April 24 in Australia, Canada, China, France, Germany, Hong Kong, Japan, Great Britain, USA. As you can rightly note, there are no Russia among these countries. So for those who crave to enjoy a novelty on the first day of sales there are two ways:

Visit one of these countries.
Wait for the discovers (the price will certainly be oh how cheated).

At the time of this writing, there is no clear information about when Apple Watch will go to official sale in the Russian Federation. About the date of exit there are several different data from many sources, most converge in the opinion that official deliveries should be expected 2-3 months after the start of sales.

What is the price of Apple Watch in the USA and Russia?

At the moment, it is known only about prices in the United States and Europe. The pricing itself depends on which version of the clock, their size and which strap is used.

Since this time the company from Cupertino is not so varied the lineup, List absolutely all configurations does not make sense. You can always see them. I will only note that the most inexpensive version will cost $ 349. For lovers of more expensive - the maximum price is $ 17,000.

If we translate into rubles, then we should expect Apple Watch in Russia at a price of 22,000 to 900,000 (this is not a typo!) Rubles.

Update! As a result, it turned out, the prices of Apple's hours in Russia start from 21,000 thousand rubles.

Will there be hours purchased in Europe or the United States in Russia?

Of course. No restrictions exist. You can completely calmly acquire Apple Watch anywhere and use them anywhere in the world, including the Russian Federation.

What is included in the package?

In addition to the clock itself, the Apple Watch package includes:

Strap.
Magnetic Cable for Charging.
USB adapter (only for Apple Watch Series 2).
User's manual.

Modifications and types of Apple Watch

The clock is supplied in three different collections based on the case materials and display:

Apple Watch Sport (Silver Aluminum 7000 Series with ION-X Glass, Rear Panel of Composite Material).
Apple Watch (316L Stainless Steel Sapphire Glass, Rear Panel of Ceramic Glass).
Apple Watch Edition (18 carat pink gold Sapphire glass, rear panel of ceramic glass).

For each of the publications, various variations with straps are possible.

Are there any differences between models because of what they are made?

Not! Everything specifications The same and functionality they provide identical. It does not matter, for $ 359 or for $ 17,000. Difference only in manufacturing materials.

Size and weight

For each of the modification, there are two display sizes - 38 mm and 42 mm. The remaining dimensions look like this:

38, 6 mm. Width 33.3 mm, height 10.5 mm.
42 mm. Width 35.9 mm, height 10 mm.

The weight varies depending on the material of the housing and the strap, the minimum - 25 g. Maximum (golden) - 69

Is the Russian language in the Apple Watch menu?

Unfortunately, at the moment there is no support for the Russian language in hours. Although there is a possibility of a quick response to messages in the "Great and Mighty".

Update!With coming new firmware, Everything has changed. Now the full support of the Russian language is announced. If you are installed on your clock old version OS, it makes sense to be updated as soon as possible. Let me remind you that the software update takes place with (from the menu) of the Companion device (iPhone).

Is there waterproof?

The head of the company, Tim Cook, said that he regularly goes to the shower with Apple Watch. However, at the same time noted that he would not recommend dive and immerse them into the water for a long time.

Watches officially have waterproof according to the IPX7 standard. This means that you can do in the gym with them and even take a shower. But it is worth refrain from dives by 1 meter lasting more than 30 minutes.

What sensors are available in Apple Watch?

Each gadget, regardless of the collection, is equipped with the following sensors:

Heart rhythm (for pulse measurement).
Accelerometer and gyroscope (considers the number of steps, and even at what floor you rose).
Sensor of external illumination (to save battery - the screen goes out when necessary).

Screen

All models are equipped with the Retina display. The Sport Collection Screen (inexpensive) covers the ION-X glass. Watch and Edition have a sapphire display cover. Although apple company Does not confirm this, most agree that the display is performed using OLED technology (allows you to get a deeper black color and reduce energy consumption).

Now about physical sizes:

38 mm. 340x372 pixels.
44 mm. 390x312 pixel.

What processor is installed in Apple Watch?

The clock is running the Apple C1 processor. There is no accurate information about it yet, but they say, it is in terms of performance somewhere between Apple A4 and A5 (iPhone 4 and iPhone 4S).

Wireless connections

It was not without them, which is quite logical: high-tech gadget - high technology!

Bluetooth 4.0 with low power consumption (LE) for detection and conjugation.
Wi-Fi version 802.11 b / g / n 2.4 GHZ for quick data exchange.
NFC for Apple Pay.

Internal memory in Apple Watch

Is 8 GB. Moreover, the entire memory is divided into parts and a limited number of space is available for each type of information.

2 gigabytes for music.
75 megabytes under the photo and pictures.
The rest of the rest is assigned under operating system Watch OS and applications (which you will install).

Battery work time

Apple indicates that the battery will work on average 18 hours. On the official page, presented more detailed information. So, time apple works Watch depending on the conditions:

18 hours in mixed mode.
3 hours in conversation mode.
6.5 hours. Audio playback.
If used exclusively as a clock - you can see time within 48 hours.
Power reserve - 72 hours.

up to 80% - 1.5 hours.
up to 100% - 2.5 hours.

How does charging?

Included with Apple Watch there is a special magnetic cable. It is fastened by rear part Gadget. Thus, there are no ports. What is quite convenient and positively affects waterproof.

Apple Watch and iPhone

Does special software need to synchronize the iPhone with Apple Watch?

No, additionally do not need to download anything. An application for synchronization is already installed on the iPhone (from the 5th version) and iOS from version 8.2.

How to create and break the "pair" between the clock and iPhone?

Open the Apple Watch application on the iPhone, select the "My Watch" tab and click "Start Pairing".

In order to disconnect the devices, there is a special item in the application. When you press you will be asked - whether you want to do backup apple data Watch? It will be useful if you plan to further use this iPhone with the clock.

The distance on which the connection is not interrupted

The standard Bluetooth range is 9-15 meters. It is better not to leave :). However, if Apple Watch and the phone are connected to one wi-Fi networkThe synchronization will be performed anywhere where this network is valid.

Is it possible to simultaneously connect an Apple Watch and another Bluetooth device to the iPhone?

Apple has not yet provided official information on the simultaneous operation of the iPhone with Apple Watch and other Bluetooth devices (for example headphones). But most likely it will be possible.

Can Apple Watch be connected to a few iPhone?

For use with another iPhone, it is necessary to break the connection to which it is connected now. You will be prompted to make a backup of the data and then, when you return to the original phone, you will not need to configure everything again!

If you forgot the iPhone at home - the clock will be useless?

Not. Even if Apple Watch does not have access to data, there is still a sufficient number of functions that can be used:

Viewing time.
Installation of alarm clocks and timers.
Tracking physical activity - pulse, pedometer (True, the route will not be traced - there is no GPS receiver).
View photo and playlists.
Apple Pay.
Various third-party applications.

Do Apple Watch affect the iPhone battery discharge?

From what is known at the moment - the clock is used bluetooth Standard 4.0 LE (Low Energy). So, their use will not affect the phone's battery.

IN this review I did not tell about the controls, menus, and the like things. For two reasons:

He turned out to be quite large enough.
About these things it is better to tell (and show) having a full-fledged device in your arms.

(3 estimates, average: 4,67 out of 5)

Apple Watch Series 3 – last generation Smart clocks from the Cupertin technological giant. Unlike Series 2, they are equipped with an autonomous LTE module running through the built-in ESIM (in Russia is not yet supported), so that can be used even without a smartphone. But it will still need to activate the device.

How to enable Apple Watch Series 2, 3?

To turn on, press and hold the "long" (not round!) Side button until the manufacturer's logo appears.

If for 10-15 seconds holding a long side button, the screen did not flashed and the device does not turn on, make sure it is fairly charged. Connect the "Charger" and leave for 30 minutes. After that, you can try to enable the device again.

How to set up Apple Watch Series 2, 3?

For initial setting You will also need a smartphone updated to the last version of iOS., with Bluetooth enabled and active internet connection (by mobile network or Wi-Fi).

How to generate initial setting

In order to initially set up smart watchThis will require an iPhone with Internet access. How to connect these two devices:

Include them;
Lay the clock to the iPhone. Wait a while until the phone appears on the phone screen with a proposal to use a smartphone for settings. In it, click "Next". If it is not displayed, check the Bluetooth - it must be enabled. You can also open the appropriate application and click the "Create Pair" button;
After that, a special animation will appear on the screen of the clock, and the smartphone will turn on the camera through which it will be recognized. Place the display of the device-companion in the center of the viewfinder, as shown in the prompts. If automatic recognition does not occur, click the "Create pair manually" button. The wizard will demonstrate device binding instructions;
Choose, on which hand you plan to wear a clock;
Agree with all terms of use;
Enter the password from your Apple ID.

How to connect Apple Watch 2, 3 to WiFi?

The smart watches at initial activation copies the profile of the settings from the connected smartphone. That is, if Wi-Fi, GPS, SIRI is included on the iPhone, etc., they are automatically activated on the device-companion. Passwords wireless networks Also will be transferred along with the rest of the data.

Enable WiFi on Apple Watch 3, as well as disable it or configure other parameters, you can directly in the corresponding initial setup wizard window.

What else can you do?

In the initial setup wizard you can also:

Set the password to enter. It will be activated when removing this accessory with hands;
Configure the branded payment service;
Install applications from the AppStore.

In the process of initial configuration, various tips on the screen will be shown on the smartphone screen.

Basic functions of Apple Watch Series 2, 3

Analysis of Apple Watch Series 2, 3

Tracking program physical indicators It is called "activity" and is pre-installed on the WatchOS OS, that is, it is ready to work immediately after the primary setting.

Interesting

Instructions on how to enable physical activity tracking or disable it, are shown directly in the primary setup wizard on the smartphone. Tips are in the application itself.

The following indicators are displayed in the ring diagram interface:

The number of calories burned during the movement (Mobility parameter);
The total duration of movements (the "Exercise" parameter);
The number of hours in the current day, in each of which you moved at least 1 minute (parameter "with a warm-up").

To view detailed information about each parameter you need to swipe on the screen with circular diagrams up.

The parameters "Exercises" and "with a warm-up" are not configured. "Mobility" can be changed by a strong tap to any screen - then the screen will open with the settings of the calorie number that need to be burned to achieve a daily target.

Reminders about the need to "walk" are configured in the management application on the smartphone, in the "My Clock" tab - "Activity".

How to measure the pressure of Apple Watch Series 2, 3?

In no way. This model, as well as the previous, is not equipped with a built-in tonometer and therefore cannot measure blood pressure.

Measurement of the pulse on Apple Watch 2, 3

To measure the pulse, you must run the "Pulse" program from the application menu. In addition, the device constantly analyzes the heart rate with the active mode of "workout", as well as 3 minutes after its completion.

When you first open the "Pulse" program, the application will propose to include notifications about increased heart rate in the absence of physical activity of use. If necessary, this feature can be activated.

Apple Watch Pulse Variability

For measuring the heart rate, phototypemography technology is used, i.e. The pulse is analyzed in the degree of blood light in the vessels under the skin.

As a result, the quality of the measurement of the pulse may vary depending on how the photocells fit to the skin, from the color of the skin, from the health status of the user and other factors. The exact value may differ in a few shots per minute of the measured both in the large and smaller.

Sleep Analysis in Apple Watch Series 2, 3

Built-in quality monitoring tools and sleep phases in this device-companion no. Therefore, it is recommended to use third-party to track softwarewhich can be downloaded from the AppStore - such as Sleep ++, Autosleep, Sleep Better, Sleep Tracker, etc.

How to track sleep on Apple Watch 2, 3, using third-party

The principle of operation of various third-party software is about the same. Required:

Install the desired sleep tracker from the AppStore application store;
Open sleep tracker and start tracking mode.

Smart alarm clock for Apple Watch Series 2, 3

To use the clock as a smart alarm, you will also need to install third-party software with support for this function. For example, SLEEP ++ or similar from the above list.

How to use Apple Pay on Apple Watch 2, 3?

In order to work branded payment serviceYou will need to install a password code. This is described in the instructions for the primary configuration of the device. In addition, right in the same menu you can bind a map with which you plan to pay for purchases.

To configure the service if this item has been passed to the primary setup menu, you will need:

Open appendix Watch on a smartphone;
Open the "My Watch" tab;
Open the "Wallet and Apple Pay" item;
If the clock is not set to the password, the application will offer to install it right now. Do it;
Click "Add Map";
Select the map from the number already attached - or enter the data of the new one;
Enter security code cards;
Click "Next" and wait for information from the Issuer Bank;
Click "Next".

Everything, the branded payment service will work.

To pay in the store, you will need to quickly press the side button on the clock twice and then bring them down the screen down to the terminal. When activated, they are slightly curled.

Need to know

If the transaction size exceeds 1000 rubles, you will have to enter a pine code of a tied card on the terminal.

Unlocking Mac using Apple Watch

Using hours, you can unlock only those Mac computers and laptops that work on MacOS High Sierra and support wireless connection Bluetooth. In addition, all company devices must be associated with one account. To configure unlock, do the following:

On the computer or laptop, open the settings application, select the "Protection and Security" item, then "Basic";
Install a tick near the "Unlock MAC using Watch" item;
Enter a password account;
Confirm.

Everything. Now the computer will unlock automatically.

How to charge Apple Watch Series 2, 3?

For charging, you must use a complete wireless charger. It is enough to connect it to the network and put the clock with the back side on its active surface. The charger is equipped with special magnets that automatically align it.

You can also use AIRPOWER wireless charging.

How to charge Apple Watch outside home

For charging, you can use not only the household network. The power cable can also be connected to uSB ports computer, laptop, external battery ("Powerbank") or any similar charger.

How to update Apple Watch 2, 3?

Update software (WatchOS) is performed through a tied smartphone iPhone.. Instruction:

Set the watch to charging. Before completing the update, it is impossible to shoot with charging;
Make sure they are charged by more than 50%;
Open the Watch application on your smartphone, in it - the "My Watch" tab;
Select "Main", in it - "Update by";
Download upgrade. If necessary, you will need to enter a password from your account;
Update will be installed automatically;
Installing the update may take time. Wait for completion. This will inform the corresponding indicator.

You can remove the clock with charging only after completing the update.

Is it possible to connect Apple Watch to Android?

No you can not. Apple Watch with android phones do not work. Does not exist third-party applicationwhich would simulate the corresponding software for iOS.

However, the user community is looking for a different way to bind these two devices. But on currently The answer to the question "Do Apple Watch work with Android" work "- no, do not work.

Express Guide by Apple Watch Series 2, 3

How to check Apple Watch 2, 3 on authenticity

First, make sure that it is Watch, and not "smart watches IWatch" or something in this spirit.

How to check Apple Watch when buying:

Spend visual inspection. Make sure the housing is deprived of any connectors, including slots for SIM cards or memory cards, charging connectors, etc.;
Turn on the device. Make sure it is in principle turns on;
Try connecting to the smartphone. If during the primary setup device suggested entering your account data - you can enter. Main: To not be the "Activate Watch" screen.

How to disable GPS on Apple Watch 3

GPS is not turned off. You can turn off on the phone, then the number of geopositioning requests will slightly decrease.

Apple Watch Series 2, 3 do not charge - what to do?

If Apple Watch is not charging, you can try the following:

Make sure that the power supply is installed in the outlet and that it has a current. Try another outlet;
Make sure the wireless charger comes into contact with the clock, and the magnets leveled it. Try to reconnect. Try to flip the charger;
Make sure the chargers (including a wireless module, cable and power supply) are original and supplied;
On the charger should not be transport film not on the one hand;
Charger and clocks must be clean;
Try to forcibly restart the clock. Press the round and side buttons and hold them within 10 seconds. After rebooting, put on charging again;
Try another cable, another power supply, another wireless charger.

If you still do not charge, take them to the service center.

How to reset Apple Watch to factory settings

The easiest way to reset is remotely delete all personal data through the ICloud service:

On your computer, open the website icloud.com;
Go under your account;
Select "Find iPhone";
Select your clock from available devices;
Click "Erase" and then select "Next" until the process is completed;
Also click the Delete button (Pictogram with a cross) next to the clock name.

Through the application a little more complicated. This will be written in more detail in this instruction in Russian (in the section "How to break a couple").

In order to reset the clock (to conduct the so-called "Apple Watch Restore") associated with them iPhone must be connected to the Internet mobile communications or Wi-Fi.

How to charge Apple Watch without original charging

The third-generation device (Apple Watch Series 3) restricted supports standard wireless charging Qi, so it can be compatible with some chargers. Try to apply it to the back to active charger With QI support for a few seconds. If charging goes - this device can be used.

How to break a couple with Apple Watch 2, 3

Before selling the clock, you will need to remove your own credentials from them. How to untie Apple Watch from Apple ID:

Open the Managing Application on the phone;
Open the My Watch tab;
Open the "Information" menu (indicated by the I symbol in the circle next to the clock name);
Select "Broken a pair";
If used tariff plan, click "Delete Tariff";
Enter the password from your account;
Confirm your desire to break the pair.

When disdicker also reset to factory settings.

Notifications on Apple Watch Series 2, 3

This may be due to the following:

Smartphone to which smart clock is connected is now used. Then notifications are displayed on it;
On the clock is active, the screen lock or the "Do not disturb" mode. Unlock or disconnect this mode through the control location;
The clock is disabled from the phone. This is reported in the control point of a special icon. Turn on to telephone wi-fi And Bluetooth, and on the clock - first activate the airrest, and then turn it off.

How to unlock Apple Watch 2, 3

To unlock the clock, touch their screen or briefly press any button, and then enter the code-password installed earlier.

How to change the strap on Apple Watch 2, 3

The clock uses special straps with branded fastening. Apply the standard spring, distributed in analog devices, will not work. But for changing the strap, it is enough to remove the old one and install in its place new before the appearance of a characteristic click.

How to remove the strap with Apple Watch

Turn the clock with the screen down;
Press the strap lock button (located next to the strap);
Holding the lock button, slide the strap to the side.

How to turn off Apple Watch

To turn off the clock, press the side button and hold it until the "Off" slider appears, and then slide it.

We present to the attention of all future Apple owners Watch instruction By activation, configuration and synchronization with a smartphone. Before buying this fashion accessory, it is worth knowing that it is necessary to have an iPhone 5 or later to use it, with iOS 8.2 installed on it. And above, as well as Apple ID. Only in the presence of these characteristics, and after you have decided on the watch model, you can safely buy them.

The first inclusion of Apple Watch

Turn on your iPhone Bluetooth. You can make it from the "Settings" menu or by the usual swipe call the "Control Panel", and there already turn on Bluetooth.

Make sure that your smartphone is connected to the Internet via Wi-Fi or on the network of your mobile operator.

It's time to include Apple Watch - To do this, clamp and hold the side button located next to the Digital Crown wheel. Wait until Apple's logo appears on the device screen.

To minimize problems in the process of setting up and synchronizing clocks with a smartphone, you need to make sure that both of your devices are charged.

Setting up Apple Watch and synchronization with iPhone

How to enable automatic device synchronization mode?

On the clock, click "Start Pairing" ("start creating a pair"). After that, a specific animation should appear on the Apple Watch screen. After the clock setting program will start on your iPhone, click and in it "Start Pairing" ("start creating a pair").

Now you need to send a smartphone camera to the Apple Watch screen with the animation shown on it. Yellow square on the iPhone screen must completely match the clock display frames. After that, the device is synchronized with each other automatically.

Manual synchronization mode

In order to synchronize each other Apple Watch and iPhone manually, you must click on the "i" symbol located in the lower right corner, after which the clock identification number should appear on the screen. Now in the application on the smartphone, you must click "PAIR Apple Watch Manually", and then manually enter the number.

Setting up Apple Watch

After the iPhone screen appears notice to successfully create a pair, you must click on "Configure Apple Watch as New".
Select the display option on the clock screen, considering what your hand you will wear them.
Confirm your consent to Apple Terms and enter your ID.
Agreeing with the geolocation service, you will no longer be able to cancel this action.
Confirm the use of Siri.
Confirm or dismiss your service agreement automatic dispatch Error information.
Set 4-digit password. To enhance security, you can set a password out of 7 characters.
Thanks password Apple Watch can be unlocked with iPhone. If the clock is on your wrist, the password entered from the smartphone unlocks them automatically. If the clock is not near you, in order to use the data from them, the password will have to be administered every time.
You can automatically install all available applications on your Apple Watch, or do it later manually.
Synchronize the accessory with iCloud to be able to view photos, mail, notifications, calendars and messages on the clock screen.

Setting up Apple Watch and their synchronization with iPhone are now completed.