Hello, dear readers of the blog Business through the Internet! Restoring the computer system may be necessary if you see such failures:
- the operating system runs at the snail's speed,
- programs hang,
- the menu opens itself and disappears,
- during windows Workflows produces numerous error messages,
- from time to time the computer makes strange noises.
Is from what to be upset! If this happens, you will want to return the time when the computer worked well. Do you think that time can not be reversed? Believe, it is possible! As a time machine, a wonderful windows tool 7 System Restore.
This guide assumes that you have installed the control panel in the Classic View. You simply select a recovery point from the list, and then restart. You cross fingers and toes, and then hope that the problem will disappear! The settings for system recovery can be found in the "System Properties" dialog box.
From the menu, select Properties. If you have hDD the volume of about 200 gigabytes, you may need to configure the slider. Create it every time you install it software, such as Anti-Virus, or software that you are not sure about.
How to restore the system? Every day, Windows 7 remembers the vital OS parameters and saves them, creating a recovery point. When serious failures occur on the computer, its normal operation can be recovered from the recovery point, that is, transferred to a safe past that was saved by the system.
It is important to know that when accessing a recovery point, your documents are not deleted by the recovery system. But the programs that were installed after the recovery point was created will be lost and will need to be reloaded. You can undo the system restore and use another recovery point.
Restore your computer with a recovery point
You will see the following menu. Select System Restore from the menu. You can use the calendar on the left to select a date. Then, on the right, you will see all the available recovery points. After restoration or it will be good. Now the pop-up message says: "We will update you at this time" and press X as consent. And, well, many of them got angry.
The simplest time is to say "No" during the initial installation. But what if it's too late? 
Any program does the trick. To restore the user settings, drag the folder that you moved in step 2 to the original location. To restore the user settings, drag the files moved in step 2 to the original location.
How to restore your computer system
Click on the button Start, select All programs. Go to the section Standard, open the submenu Office, select the menu System Restores, then a dialog box appears.
You can use another way: Start ==> Control Panel ==> Recovery ==> Starting System Restore. The same dialog box appears.
Do you want to replace it with the older one that you are moving? There may also be times when you want to reset the console operating system to the factory default settings for troubleshooting, but you want all of your games and applications to be installed. This option also removes your games and applications, so if possible, you should use the following steps.
If you are ready to restart the console to the factory default settings, follow these steps. You must use this parameter when selling or gifting the console to someone else. You must use this option as your primary choice for troubleshooting. To return from this screen, simply select the "Cancel" button. At the moment, no action was taken. This is a safe exit from this screen.
- This option resets the console to the factory settings.
- This will save you from downloading or reinstalling large game files.
2. Select the recovery point.
The following commands are available in the computer system recovery program:
Cancel system restore. This command is necessary in case the recovery result does not suit you, it appears only after using the recovery point.
Option 2: rollback to previous driver. If you install new driver without previously uninstalling the previous version, you can simply drop your driver in previous versionby completing the following steps. And, secondly, you must remember the password for the old one account user - otherwise you can not log in. To uninstall the program, open the "Settings" and click "Update and Security".
Answer the question - or not
Then go to the "Restore" section. When the process is started, it can no longer be broken. You must remember the password for the administrator account. . Since you installed this program, your computer has never been the same. It was slow, suddenly started spinning, and even other programs that worked fine now begin to present problems. All you need is to go back in time until the time when you installed it.
Recommended system recovery. Take advantage of the proposed recovery point, this is the best chance to fix the situation with the computer. As a result, the established latest updates, drivers or software, as they could lead to crashes.
How to enable system recovery
Fortunately, there is a function for this. It's called "System Restore" and basically makes your computer "back in time." To verify, follow these steps: In the window that opens, you will see an item called "Security settings".
It determines how much space your system will use to store recovery points. It's nice to devote at least a few gigabytes to it; When the mileage ends, the old recovery points are deleted. Do not forget to click "Apply" to save the settings.
Show other recovery points. This command is always available, after selecting it, a list opens, from which you can select any recovery point by creation date.
You can check how these settings affect the computer. To do this, click on the button Search for affected programs, and you get a list of those programs that will be affected by the selected option.
If something goes wrong on your computer after you turn on system recovery, you can "go back" to undo the problem. This process can lead to the fact that the programs that you installed after the recovery point date do not function properly and need to be reinstalled, remember this.
This time, click System Restore. The following window explains some recovery points. After reading the text, click "Next" to continue. In the next window you will see all recovery points. In addition to the name, they also have a date when they were created. If you want to see which programs will be affected by the restore, click "Search for vulnerable software".
3. Check again to save all open files and click on the button Further, then Done.
After a short pause the computer will reboot and will work fine. Even if you do not have any problems on your computer, I advise you to create your own recovery point. Give her a descriptive name, for example "Before you need a doctor" and you easily by the name will find the desired recovery point.
How to restore your computer system
This list will show all the programs that you might need to reinstall after recovery. Select where you want to restore your system, and click "Next". Before starting the process, your computer will prompt you to review and confirm the information. If everything is correct, click "Done". The process will take several minutes and restart the computer. Remember that it can not be interrupted after startup.
How to manually create a system restore point
Suppose you intend to change the configuration of your computer, but you suspect that this may worsen your performance. In this case, before the changes it will be interesting to have a recovery point, so you can undo them, if you want. Give the name that suits you best, and click "Create." Wait for the process to finish and click "Close". You can restore your computer to this point at any time!
Creating a recovery point
1. In the menu Start click on the folder A computer right-click and select Properties.
A dialog box opens. System, which displays all the most important functions of the computer.
Recovery control point
While we are using the computer, we browse the Internet, install programs, drivers, configure the system, install updates. But sometimes something goes wrong, and the system begins to behave unpredictably. When this happens, the first thing that counts common user, - "I wanted to go back in time" to avoid the problem. With the restoration of the system, this is possible!
Restoring the system to an earlier point
When installing programs and drivers, we are always exposed to errors and fictitious settings that leave files in system folders, which interfere with the operation of the system. Enter the only available result and, depending on the settings for managing user accounts, enter the administrator password or provide confirmation. You can also choose from the list of recovery points. Try using recovery points created by you before the date and time when you started to notice problems.
A dialog box appears. Properties of the system.
3. Click the button Create in the tab System protection.
If you do not see the restore point that you want to select, just select the "Show more recovery points" checkbox, and the remaining points will appear. After selecting the desired point, you can click "Browse for affected programs" and see what will be changed when using this point to return the system to its previous state. In the above table, there are programs that will be deleted after the computer is restored, and the lower frame displays the programs and drivers that will be restored.
These programs, which will be restored, may not work correctly and, therefore, they must be reinstalled. Knowing this, you can close the window and confirm the operation to start the recovery. The computer will reboot, and during the shutdown and boot process the system will be restored.
In the dialog box System protection enter the name of the new recovery point.
Save the restore point by clicking on the button Create. Having created a recovery point in advance, you will always be able to choose the state that is best to return in case of a system failure.
What if recovery does not solve my problem?
If necessary, you can undo the restore operation or try to select a different restore point in the same wizard. To cancel a previously performed restore, just go back to the System Restore window, click Cancel System Restore, and confirm.
Create a recovery point manually
To do this, go to the Start menu, right-click Computer, select Properties, and click Advanced system settings»; or find "Advanced settings" in the "Start" menu and select "Show extra options system ".
If you find that your computer is infected with viruses, before you disinfect it with an antivirus program, delete any existing recovery points. They can contain viruses!
Removing restore points infected with viruses
In the dialog box Properties of the system need to click on the disk C (System), then on the button Configureь.
Reducing the location of recovery points
In the window that opens, enter the name of the point that will be created, and click "Create". As you create restore points in the system, they are large files. These files contain information about how it was before. Depending on the number of recovery points on the computer, disk space may be compromised over time.
How to restore your laptop to the factory settings
In the section "Use disk space"You can select a location for the recovery points, and you can delete all previous restore points, leaving only the last restore point you created. This option can be a good way out when the user needs to make space.
In the dialog box System protection click on the buttons Remove ==> Continue ==> OK. Close the window and start deleting the virus.
After you have cured the computer, create a new restore point. Name it accordingly, for example, "After disinfection".
Automatic completion history
This file stores data search engine, set by the user. If the word has not been added, the file does not exist. Automatic completion of modules.
Settings for security certificates
Types of files and actions to download. Install new software, the latest drivers, or browse the web different types of viruses, entails the risk of damage to the operating system. We can prevent this from creating a recovery point. Protecting your system with the previously created point, you can undo the unwanted changes made to your system by restoring your computer in the best possible condition.Restoring the computer system is a simple, but very important task for windows support 7 in working order. When you know the functions of a computer well, it is not a secret for you how to restore the system, you do not need to look for a specialist or knowledgeable friends. You will perfectly cope with this task yourself!
Good luck and see you on the pages of the blog Business through the Internet!
Create a recovery point system
Search for text. Create a restore point on the taskbar and select it in the list of search results. To create a restore point, first turn on system protection by clicking the "Configure" button. The above action will open the possibility of creating system restore points. Proceed to the next step by clicking the "New" button.
We provide a description that will help you determine the recovery point. Note that the current date and time will be automatically added to the description, which, undoubtedly, will help determine the points. Immediately after clicking the "Create" button, the process of creating a new recovery point begins.
Friends, I have long promised my regular readers to write an article on the restoration of the system. Many of us have already faced the situation when we install a program, make some adjustments to the operating system, accidentally delete the service files and do many other things, which eventually leads to incorrect and unstable operation of the OS.
Today I will tell? What you need to do to get the operating system back into working order.
Friends, do not forget that there are no desperate situations.
The algorithm considered below will be useful to all. There are no such people who do not make mistakes and always do everything right. As the wise people say: "It's not mistaken, only one who does nothing". But you should also be able to correct mistakes.
And for everyone who wants to learn, if necessary, and to cancel the last actions on the computer, I wrote a detailed algorithm.
Recovery control point
So, Friends, a restore point is a copy of the operating system files, program settings, and the system registry at a certain point in time.
The operating system, as a rule, creates automatic recovery points at regular intervals, in case of installation of any software or on the direct instruction of the user.
It should be noted that when you "roll back" to the recovery point of the operating system, personal user files such as music tracks, image files, documents, etc.
Attention! Returning to the recovery point allows you to restore the OS, but not the user's personal content.
1. Click on the "Start" button at the bottom right of the screen and select "Control Panel". The main window of the Operating System Control Panel opens. windows systems 7:
2. Click on the very first section "System and Security" and in the window that opens, select the "Restoring a Previous Computer State" subsection.
3. In the window that appears, click the "Start System Restore" button.
4. The system will collect the necessary information and start the System Restore Wizard. In the first window that appears, you just need to click the "Next" button.
5. Next, the second window of the Wizard opens, where you select the recovery point from the list. If you have just made some settings and wish to cancel them, then select the topmost entry. You can also select any record of the recovery point that suits you.
Also you can start the "Search for affected programs" by clicking on the corresponding button. The operating system will scan its service records, determine which programs will be deleted or restored during the rollback to the recovery point, and present the analysis results in a separate window. After reading the lists of affected programs, click the "Close" button.
7. A warning window will appear on the screen, and it will not be possible to interrupt the system recovery. And once again you will be asked to confirm your intentions by clicking the "Yes" button.
After that, the system restore process will start. Which usually takes a little time - about 2-3 minutes. After that the system will reboot and you will see this window:
The status of your computer is restored to the specified state. Now you can check the operation of the OS and other programs for the correctness of their operation. Be sure to test the result of system recovery.
If operating system failed to restore the system, the window will be different. This often happens in case of work antivirus software. Please unplug it and try again.
If you could successfully solve the problem "", then I congratulate you. But in some cases, the restoration of the system did not lead to an improvement in the situation, but rather to its deterioration. The system began to hang, some programs do not load at all, missing icons on the desktop, etc. In this case, it's best to cancel the system restore.
To do this, we do the whole algorithm, starting from 1 point. When you perform step 3, you will open this window:
Select the item "Cancel System Restore" and then proceed to the above algorithm.
So, Friends, we considered a rather important question "how to restore the system?", Learned how to "roll back" the system to recovery points and to cancel "kickbacks".
It should be noted that it is possible to restore the system in this way, but only if there were no serious damages system files, for example, as in case of infection of the system with a virus. In the case of serious OS malfunctions, this tool is inefficient and you can not avoid resorting to one of the advanced methods of system recovery.
In one of the following articles, I'll just talk about such a tool - disk emergency recovery.
