Instructions
Enable auto-pickup in Panasonic to activate caller ID. To do this, enter the phone menu, select the "Base settings" item or Setting bs. Then press the 3 key on the phone. Enter the PIN code of the base, by default it is four zeros. Then press the button 5, and then 2. In the "Enable auto-raising" item, press "OK".
Use a different method to enable caller ID if the previous one did not fit your phone model. Enter the phone menu, then go to settings base station... Select "Automatic Caller ID". While inside this item, dial 255. Nothing will be displayed on the screen. After that, the item "Autoraise" will appear. Select the "On" option and exit the menu.
Enable auto caller ID in Panasonic 5XX phone using service menu... To do this, go to the menu, then select the item "Change the PIN code base", enter the password 72627664. Then enter engineering menu phone. Go to the Write eeprom option, enter the address 007F. To enter F, press the R key, then the number 5. The hexadecimal character F appears. The rest of the letters are typed in the same way, the numbers correspond to the letters in order: A \u003d R0, B \u003d R1 and so on.
Activate auto-pickup on the PANASONIC KX-TCD500RU phone. To do this, go to the menu, then select "Base menu". Enter pin code 0000. Select "Other". Click OK. Select the option "Change PIN code base", then "OK". Enter the value 7262 from the keyboard. Next, dial confirmation 7664, after which you will enter the engineering mode of the phone. In it, select the second option and click "OK".
Click on the Set address item, enter 007, press R and 5. Next, enter 06 and click OK. After that wait sound signal confirmation, turn off and on the phone again. Then select the number of calls from which the number will be determined in the "Base settings" - "Caller ID" section.
The function of automatic identification of s is very often available if there is a corresponding setting item in the phone menu, but it is not always easy to disable it.
You will need
- - instructions for your phone;
- - numbers technical support.
Instructions
Read the instructions for your telephone. Go to its main menu and in the call control section, find the function to enable automatic number identification. Find the point to deactivate it, if it is not provided, try again to click on enable AND HE.
If the status of the function has not changed, contact your dealer if the warranty period is still valid. If it has expired, contact the technical support of your machine manufacturer or look for additional information on various technical forums regarding the products of this brand.
To turn off the automatic number identification function in phone Panasonic, go to the enable menu for this service and select disable it in the context menu. Also, in some models, this function is not provided separately, in this case, simply return to the standard factory settings in the system parameters.
After that, check if the automatic number identification function is disabled in your machine. In such phones, the setting is very difficult, so, best of all, entrust it to the sellers when you buy it, if you don't understand the menu of the device, or consult with knowledgeable peopleso as not to accidentally change unnecessary settings.
If you cannot find the shutdown setting in your machine AND HE, contact the technical support of your local telephone exchange in order for the service provider to deactivate this service. Most likely, you will have to fill out a special application form, and after, after the processing time of the document, automatic identification of the subscriber calling you will be disabled, and to reactivate this function, you will also have to contact your telephony service provider with a statement.
Check with the sellers how the caller ID function is enabled or disabled upon purchase.
The automatic number identification function allows you to identify the subscriber who is calling you and his name, if it was previously entered by you into the memory of your communication device.
You will need
- - telephone with identifier function.
Instructions
Get a telephone that has automatic number identification. Connect it to a telephone wall jack and, if necessary, connect to a power source (may vary by model). Please note that the function may be narrower at the time of purchase, as, for example, in many Panasonic models.
Also, if you stop using this function by simply disabling it in the menu of your phone, it will not automatically be disconnected from the list of services provided by the telephone company, so you will have to contact them with a statement in writing to terminate the provision of the automatic caller ID function.
If the automatic number identification function on your landline has not turned on automatically, fill out an application for connecting the service at the office of your telephone company. You will need a passport with a residence permit at the address to which you are registered given number landline phone or any other person who has the right to make changes of this kind to the list of services provided.
In order to enable automatic caller ID for yours, activate this function in the call settings section. AND HE usually already enabled by subscribers cellular communication... If it was disabled earlier, then you can activate it by contacting the technical support service.
Related Videos
note
If you disable the identifier in the deskphone menu, the function will still remain enabled.
Qwerty keyboards are much more convenient than regular keyboards, but not in those cases when you have a touchscreen phone. If you nevertheless decide to use it in your phone, make sure you have a stylus in advance, because at first it is quite difficult to get used to this type of touch keyboard in your phone.
Instructions
When entering a message or other data from the touchscreen keypad of the phone, swipe over its buttons to the right or left. If this does not change the input mode to Qwerty, try opening context menu input and find the setting associated with your default keyboard. Also, this parameter in some phones is configured in the general properties of the mobile phone or its themes.
If the documentation of your mobile phone contains instructions on the presence of a keyboard in the Qwerty device and it does not turn on when you perform the necessary actions prescribed in the instructions, contact service center for repair.
You can also try flashing at home using special cable or flash cards. It is best to use the stock firmware for your model.
If your mobile phone model does not provide a Qwerty keyboard, install it as a separate element. This method is only relevant for smartphone owners.
Download keyboard for your mobile device model, check the file you downloaded for viruses. After that, copy the installer to the phone memory module. Start the installation process from the file manager.
Please note that the keyboard you install in the form of an application should not request access to the Internet, send calls or SMS messages; most likely given software is malicious.
If installed correctly, run keyboard from the list of installed applications, minimize it and go to entering text in a browser, SMS editor, and so on. Run keyboard from minimized applications and use it to write desired text.
Helpful advice
Read the instructions before using - they are not written only for children and retirees.
Caller ID on landline phone allows you not only to find out who is calling you at the moment, but also to view all the phone numbers from which you were called in your absence. This is enough convenient function for both home and office phone.
You will need
- - Panasonic phone.
Instructions
Enter the phone menu to enable Caller ID, select Base Station Settings, then select Automatic determinant numbers ". While in this menu, dial 255 from the keyboard. The “Auto-raising” item will appear on the screen - press “On”.
Activate the auto-raise function to enable the detector. To do this, go to the menu and select "Base settings". Press key 3. Then enter the pin code (default is 0000). Then press numbers 5 and 2 in sequence. incoming call press the call button once to determine the number, and a second time to start the conversation.
Set up automatic determinant numbers in the Panasonic 325 model. Enter the phone base setup mode. Then select "Caller ID", click "Ok". Next, use the joystick to scroll down until a line appears on the screen. Dial the digits 255 in sequence. Press “Ok”. Then, in the menu that appears, select the "Auto-Receive" option. Then click on the "Ok" button.
There are two types of questions on the Internet related to the need to hide your mobile number: how to hide it and how to see a hidden incoming number. After all, the standard one, which works on all MTS tariffs by default, cannot do this. It can be assumed that there may be enough reasons for this: from working moments, to a simple human desire to ensure anonymity. MTS took into account the wishes of private and corporate clients and offered their subscribers the "Number identification restriction" service.
AntiAON
Any subscriber can use this service mobile communication MTS. After activation, on the display of other mobile phones when you call, not the digits of your number will be displayed, but the non-binding inscription: "Number is hidden". You don't need to change any settings, you just need to activate the service.
Connection.
There are two options for connecting "":
- USSD code * 111 * 46 # "Call" button. After dialing these numbers within 24 hours, you will receive an SMS message about the activation of this service.
- "Internet Assistant" on the MTS website. In order to use this method, you need to register on the portal, go to your page and choose the AntiAON service from the operator's many offers, and then activate it.
"Anti-caller ID on request."
If you need to hide your number once, this is also possible. This service is called "Call Line Identifier" and when activated, the caller's number is not displayed on any next outgoing call.
- You can also connect it through the "Internet Assistant" or through the USSD code * 111 * 84 # "Call" button. In addition, you can, without deactivating the service, allow you to display your number once. To do this, type * 31 # number mobile subscriber in the international standard and press the "Call" button.
Disconnection of the service.
It is enough to dial the combination * 111 * 47 # button "Call" and no later than one day later, you will receive an SMS message with information about the cancellation of this service.
Disadvantages.
Perhaps the main disadvantage is that the service is valid only for MTS customers. For subscribers of others mobile networks and city numbers, it may work incorrectly and display the caller's number. The second inconvenience is that the service is paid: the money is withdrawn once, at the moment of activation and then, monthly, as a monthly fee. The cost varies depending on the tariff package. Well, the third drawback is the human factor. If there are people who do not want their number to be seen by other subscribers, then there are people who simply do not pick up the phone, receiving calls from hidden numbers... We recommend to disable the service
Master's answer:
For the caller ID function to work correctly, it is not enough just to buy a telephone set and order the service at the PBX. You need to be able to correctly connect your phone to the network and configure the appropriate functions in it.
When you bring home the phone you just bought, the first step is to look at the outlet to which you need to plug the phone. If they are the same, that is, they are made according to the same standard, then nothing more needs to be done. But if the telephone plug does not fit the outlet, then change one or the other.
If you have an old-style socket, and the plug turned out to be modern, then cut the last one so that the cut piece of wire together with the plug has a total length of 20 centimeters. In the future, you can use it to connect some other phone. Do not connect the two outermost wires in the cord anywhere. With the screws turning the old-style plug towards you and the plastic pin down, try connecting the middle wires to the right pins. Now close the plug and try plugging it into the telephone wall jack. If after the procedure the phone does not work, then pull out the plug again and now open the socket. Look in it to which contacts it is connected phone line and move the middle wires of the cord to the same pins in the plug. Now close the plug, plug back the socket - the device should work.
If, on the contrary, you have a modern socket, and the plug on the device is old, then do the following. Open the plug, disconnect the wires from its terminals, now take a piece of cord with a modern plug at the end. Leave the extreme wires on this cord, you don't need them, but twist the middle ones with the wires coming out of the telephone set. Insulate the connections well and now you can connect the phone.
Some models of telephones with the caller ID function are supplied with an AC adapter. If you have this model, before plugging the telephone line cord into the wall socket, turn on the telephone. electrical network... If there is a radio tube, place it on the base. If your phone model is powered by batteries, then install them, observing the polarity.
Then it was the turn to set up the device. First, read the instructions that came with your phone for how to set up a feature such as caller ID. Choose a method that matches your PBX standards. Then set the exact time on the phone, the required ring volume and the corresponding melody. Set an alarm and ringtone for it.
Now, to check if you have configured the caller ID correctly, call yourself on the city phone with cell phone... When you call, the number must be determined. Please note that if you have a caller ID of a domestic standard, then at the moment when the caller's number is determined, the phone simulates picking up the receiver and funds will be debited from your cell phone account. In this case, only the last seven digits of the number are determined.
In this article we will tell you how to activate or deactivate the Beeline Number Identifier service, what is the cost of connection, how to manage the AntiAON option from your Personal Account. You will learn whether it is possible to send anonymous SMS and MMS messages using AntiAON, as well as how to hide your number using the phone settings.
How much does the AntiAON option cost?
The cost of connecting the option, thanks to which your phone will be hidden when you call - 0 rubles. The service itself is provided for a fee, depending on the plan:
- For subscribers with a prepaid payment system, the subscription fee is 3.5 rubles per day.
- Subscribers with a postpaid system will be debited from the balance - 105 rubles.
For details, as well as the cost and terms of service, it is recommended to check with the support service by phone 0611 .
How to connect
Like all Beeline services, connecting AntiAON is quite simple. Choose any convenient way to connect.
- Phone call - in order to activate Anti-Identification Call it is enough to call 067409071 ... The AntiAON service will be activated automatically.
- To connect the Beeline Anti-Identification Device, you can dial a combination of numbers *110*071# .
- Use your Personal Account.
- Contact the office.
You can check the status of the service by doing USSD request: *110*09# "call".
To make a confidential call, turn on AntiAON on Beeline. In order for the subscriber you want to contact, with Anti-Identification enabled, to recognize you, dial * 31 # full_ phone "Call button". Do not forget that you need to enter with an eight or +7.
Hidden SMS
The Anti-Identification Line option works exclusively with outgoing calls. It will not be possible to send anonymous SMS or MMS messages, your phone will be identified anyway. Remember this.
Personal Area
It is much more convenient to manage the Anti-Identifier through the Beeline Personal Account. To enter "My Beeline" go to the official website, enter your username and receive a password to enter your account, also enter "My Beeline" using the application on your mobile device.
After you have entered your account, click: Services, Mobile communications and the Internet, Call management, Number identification restriction. You can also use quick search.
Additional conditions AntiAON from Beeline
Please note that the AntiAON option cannot guarantee 100% anonymity, so do not be surprised if the called subscriber sees your phone. It is possible that the person whom you called had “Super Identifier” activated (with this option, it is virtually impossible to hide data). Anti-identifier can hide data only when making calls to Beeline subscribers. There is no possibility to hide for other subscribers, it is also impossible if the subscriber is in international roaming.
On the day on which you activated the service, the subscription fee for the current day will be debited immediately. Be prepared for this and top up your balance on time. Payment for the service, as always, is made in rubles. The price already includes VAT.
How to disable Beeline caller ID
If you want to make your number identifiable, remove AntiAON, then you need to make a USSD request: *110*070# , and do not forget to check the status of the service, whether you managed to disable Anti-Identification: *110*09# .
Hide your number using phone settings
In some mobile devices there is an option to hide the number. To connect the service from your phone, go to the "Call settings", then to "Call management". In this section, look for the "Hide number" section. You will see the item "Install by network", it needs to be changed to "Hide phone".
Why do I need AntiAON from Beeline
When you call, your number is displayed on the other party's phone screen and saved in the call log. Maybe you often call people at work and don't want to be called back or want to prank your friends. Hide your data will help the service Anti-caller ID from Beeline.
When a call comes in to a mobile phone, subscribers usually see who is calling. If the call comes from a familiar person, his name will appear on the screen. Telecom operator Beeline allows you to automatically determine who is calling. "Caller ID" service is a basic option for any tariff. But sometimes there are cases when the determinant does not work or does not work at all. This can happen if the person who makes the call has the service "Call Line Identifier".
If the caller uses AntiAON, then neither the number nor the name of the subscriber will be visible on the screen. In this case, the screen of the device will display the phrase “Number unknown” or “Number hidden”. Although the qualifier is a standard service, it can be disabled, so you should familiarize yourself with the description of the option and the methods for enabling and disabling.
Service description
As mentioned above, the option is basic. This means it is provided to customers free of charge. There is no subscription fee and no activation fee. With the "Caller ID" function, subscribers can not only view who is calling or called, but also set separate melodies for different contacts from the phone book.
Using mobile communication without identifying the number is very inconvenient, therefore, when disconnecting it, it is recommended to connect the service back. The connection methods are described below in the overview.
How to connect Caller ID on Beeline
To specifically enable the service, there is no need, it works from the activation itself starter package... If there is a need for activation, you should use the following activation methods:
- The simplest, and quick way enabling a service is entering and sending a service request to a telecom operator. To do this, the subscriber must mobile phone dial * 110 * 061 # ... After dialing, you will need to make a call to complete the activation procedure. At the end, the device should receive a message with data on the successful connection of the service.
- If there is access to a computer and Internet access, then customers can use the self-service service. To do this, go to the Beeline website and go to personal Area... Next, you will need to register in it and receive a password to enter. Next, enter as a login mobile number and password. Going to the section with services, find the "Caller ID" and activate by pressing the appropriate button.
- The company also provides an opportunity to independently activate the service through a set of special phone number... Such a call replaces sending a request. The client should call 067409061. After dialing, the service will be activated, and the operator will send a notification in the form of SMS with confirmation.
- If difficulties arise, then it is recommended to call help desk and get the operator's advice. To do this, dial 0611 and wait for the operator's response. Then explain the reason and the employee will help solve it. You may need to tell the operator your passport details to verify your identity.
- And the last method of activating the service is a visit to the Beeline branded communication salon. Specialists will be able to turn on the service in a matter of minutes. Please remember that you need to bring your passport or driver's license with you before your visit.
Almost immediately after sending a connection request, the option starts working. Maximum client will need to wait up to 15 minutes.
How to disable Caller ID
In the event that the client, for any reason, needs to disable the service, use any method provided below:
- The simplest method is to send service code operator Beeline. To do this, dial * 110 * 4160 # on the device , after entering make a call. The client will be notified of the disconnection via an incoming message.
- You can also disable the service using free phone 067409061. After the call, the voice menu will be available, the client will need to follow the instructions of the informant to deactivate the identifier and press the corresponding numbers.
- If you cannot disconnect from the option, then you need to call the operator on 0611. Calls to the number are free. The operator will help with the disconnection, but the subscriber will need to provide passport data.
- Specialists of Beeline branded stores can also help in deactivation. To do this, you need to take your passport and go to any nearest salon.
- Often the shutdown occurs quickly, almost instantly, but sometimes the procedure can take up to 24 hours. In any selected method, the client receives a disconnect message to confirm deactivation.
