Notebook Lenovo G50-30 Model 80G0 brought to the reinstallation operating system with Windows 8 on Windows 7. Excellent laptop design, not expensive and with usb 3.0. How do I enter the Lenovo 50 BIOS BIOS to select boot from drive or flash drive?
Lenovo G50-30 Model 80G0 how to access the BIOS?
To enter the BIOS (boot menu) on the Lenovo G50, you need to hold down the button "when turning on the laptop"
"Novo" button
The "Novo" button is used to start the Lenovo One Key Recovery System or to configure Bios in the Lenovo G50. It can be enabled when the laptop is turned off or in sleep mode
Install Windows 7 on a Lenovo g50 laptop
To install Windows 7 on Lenovo G50, it is necessary to change it in the BIOS in the Exit tab -\u003e OS Optimized Defaults -\u003e Win8 64bit to Windows 7 OS.
Save the settings (Save & Exit.) -\u003e Install boot disk Windows 7! -\u003e Clamp the button Novo (Novo Button Menu) and select "Boot Menu".
If you have an error 0X000000A5 in Windows 7 on the Lenovo G50-30
If Windows 7 is already hDD and error 0X000000A5 appears, then fix the error blue screen death can be as follows:
- We go in the BIOS, in the second tab USB3.0 we change to USB 2.0.
- In the last tab, change the OS from Win8 OS to Win7 OS.
- Choose Load Defalt Settings.
- Save & Exit.
- Installing Windows 7
- USB2.0 is changed to USB 3.0.
Virtually every laptop owner had to solve certain hardware problems in the mode system settings BIOS. The need to climb into the heart of the computer most often arises when you need to install an operating system, so the problem of logging into the BIOS is relevant for every active user of the laptop. Often go to basic system settings is not possible because of the banal ignorance of the keys by which it is called. This is especially true for Lenovo notebooks, because the key combinations on this model are almost always unique and do not coincide with other computers. Your attention is offered information on how to go to BIOS on laptop Lenovo.
Go out to the BIOS on a Lenovo laptop
Login to the system change mode on the Lenovo device can be three basic hardware methods:
- The most universal way is to press the F2 key while the system is on. On some models, the "Fn"
- The second way is to use the "Think Vantage" key, which is not present on all models
- The button "Access IBM", "NOVA" - one more variant of hardware activation of the mode
Sometimes hardware methods may not work because of the features of the installed operating system. Periodically, problems arise in Windows 8 / 8.1. You can turn on the BIOS on these systems without clipping any keys - via the usual interface. Some very simple ways:
- Open the right panel, select the Settings tab - Change computer settings - Restore and update - Special download options - Reload now. After rebooting, go to the Diagnostics section, go to extra options and click on "UEFI software"
- AT the command line type and execute the command "shutdown.exe / r / o"
Exceptions to the rule - special Lenovo models
If none of the above methods of logging into the BIOS is suitable, you should look for the name of your computer in the list of special Lenovo models, where the mode is called in a specific way.
Lenovo b590
In this model, to start the BIOS, you must turn off the system, after removing the battery and for a few seconds, turn off the device off the power cable. Next, you need to click on a small button (Nova) next to the notebook's operation indicator. After starting the menu, selecting the Russian language and layout, go to the path "diagnostics - advanced parameters - firmware settings - BIOS".
Lenovo g505
On this model, the BIOS can be launched by performing the same actions as the previous one, as well as by pressing the "Fn" and "F2" keys. Clamping the keys is necessary while turning on the laptop. The method is also suitable for Lenovo g500.
Lenovo - one of the leading manufacturers of laptops, whose devices are very popular around the world, and in particular in our country. First and foremost, the laptops of this company have dispersed due to the rich model range, in which there is far not one budget model, there is a wide choice of gaming laptops, as well as stylish, thin and, of course, expensive ultrabukov. Working with laptops of this company, users often wonder how to enter the BIOS.
The BIOS is the most important component of the computer, motherboard. This software is responsible for setting up the computer, checking the hardware status, and running the operating system.
One of the most popular procedures that requires run the BIOS - reinstalling the operating system. And if in the reinstall Windows there is nothing difficult, difficulties often arise exactly at the stage of entering the BIOS.
Any laptop or desktop computer, no matter which manufacturer, has the same algorithm for entering BIOS settings:
1. The computer is sent to reboot or simply turned on;
2. At the earliest stage of the load comes into play hot key, responsible for entering the BIOS: it must be pressed frequently and repeatedly until the BIOS itself is actually displayed on the screen.
Which key is responsible for entering the BIOS?
The problem is that different buttons for entering the BIOS can be used on different notebook models. However, if we talk about the Lenovo laptop, the list of hot keys is somewhat narrowed, and there are also own solutions for entering BIOS settings.
1. F2 (Fn + F2). The most popular key that works for most Lenovo notebook models. Start attempts to enter the BIOS is necessary with it.
2. "Access IBM" button. This button is not available for the entire lineup of Lenovo notebooks and is not located on the keyboard itself, but higher or even on the side.
If you find yourself in such a button, turn off the laptop, and then click this button. The system boot selection screen is displayed on the screen, in which you need to select BIOS Setup or "Start setup utility".
3. The ThikVantage button. Another key located on the laptop. After finding it, turn off the laptop and hold down the key for a while. After a moment, the system menu appears on the screen, in which you also need to go to the BIOS.
4. Del, F1, F12. If none of the methods above, and did not help enter the BIOS, try to try your luck using these possible keys.
As a rule, these are the main ways to enter the BIOS on Lenovo notebooks.
Good day.
Lenovo is one of the most popular notebook manufacturers. By the way, I must tell you (from personal experience), laptops are quite good and reliable. And there is one feature in some models of these laptops - an unusual input in the BIOS (and you often need to go into it, for example, to reinstall Windows).
In this relatively small article, I would like to consider these features of the entry ...
Logging in to the BIOS on a Lenovo laptop (step-by-step instruction)
1) Normally, to enter the BIOS on Lenovo notebooks (on most models), just press the F2 (or Fn + F2) button when you turn it on.
However, some models may not react at all to these pressures (for example Lenovo Z50, Lenovo G50, and in general the g505, v580c, b50, b560, b590, g50, g500, g505s, g570, g570e, g580, g700, z500, z580 may not respond to these keys). ..
Keys for entering the BIOS for different PC and laptop manufacturers:
2) The above models on the side panel (usually next to the power cable) have a special button (for example, the Lenovo G50 model see Figure 2).
To enter the BIOS you need to: turn off the laptop, and then click on this button (it usually draws an arrow, although I admit that on some models, the arrow may not be ...).
Fig. 2. Lenovo G50 - the BIOS entry button
By the way, an important point. Not all Lenovo notebook models have this service button on the side. For example, on a Lenovo G480 laptop - this button next to the power button of the laptop (see Figure 2.1).
3) If everything is done correctly, then the laptop should turn on and a service menu with four items appears on the screen (see Figure 3):
Bios Setup (BIOS settings);
Boot Menu;
System Recovery.
To enter the BIOS - select Bios Setup (BIOS settings and settings).
Instructions
Connect the Lenovo laptop to mains power. If power is suddenly lost during BIOS operations, this may adversely affect the continued use of the computer.
If you do not have instructions for the Lenovo laptop at hand, you will have to go online and find out the necessary information on the manufacturer's website (http://www.ibm.com/ru/ru/). This can be done both online and by downloading the instruction in the form of a deployed PDF file. In order to read this manual, a special program must be installed on the computer, for example, Adobe Reader (http://www.adobe.com/) or Foxit PDF Reader (http://www.foxitsoftware.com/).
If for technical reasons Internet access is impossible, then you will have to act on your own. Turn on the computer and watch the information appear on its screen. Usually, to facilitate the life of the user at the very beginning of the laptop for a couple of seconds (just while the BIOS is conducting a test-polling of the computer's devices) a prompt appears in the form of a key name or a combination of keys that need to be pressed and not released, While the laptop does not appear in the BIOS table.
Note the notations F2 and F12. It's these keys on the Lenovo laptop that are designed to interrupt the device's test polling and prevent the operating system from booting.
Press and hold F12 on the keyboard. Thus, you designate your desire to enter one of the BIOS partitions, called Quick Boot. This small, but very important subsection of the computer architecture is designed to determine the priority of computer boot. Entering the priority table, you can change the order in such a way that after successful work BIOS computer first addressed, for example, to CD-rom, then to the USB-port and only then to the HDD. Similar operations with the boot line are typical for the procedure for reinstalling the operating system on a Lenovo laptop.
Press F2 to enter the BIOS main menu. Here, an experienced user gets access to the settings of a large number of parameters of various devices. In contrast to conventional PCs, the BIOS of the laptop also allows:
Configure the security system;
- change the nature of the touchpad;
- Correct the output of the image on the display;
- Calibrate the battery, and also see the serial number of the device, its motherboard and other equipment.
The BIOS is a basic software that allows you to interact with the computer without accessing the disk. Here are the codes, through which you can manage any system devices, ports and disks. The BIOS is sewn in the ROM chip on the motherboard. In most cases, when the system starts, the data is copied from the ROM to the random access memory, the speed of which is much higher.
BIOS is standard, works without failures. However, in those situations when microcodes are not sufficiently developed, there is a discrepancy between the motherboard and integrated devices, more advanced equipment appears, it becomes necessary to install the BIOS again.
What is required to install the BIOS again?
To flush the BIOS, you will need specialized utilities developed by the motherboard manufacturer or other companies. With the help of these installation products, all necessary firmware is stored in the CMOS chip. It is advisable to use the "native" utilities, which are available on the disk supplied with motherboard, since they are fully adapted to the specific equipment and exclude the possibility of faults or errors.
Since CMOS in modern motherboards is something other than flash memory with microcodes and settings, in order to properly install the BIOS, you need to find a file with its corresponding version and a flasher program.
By the way, it's better to flash BIOS from Windows, because it's more convenient. A similar operation from DOS will take a long time, will require some ingenuity, although it is more reliable. Moreover, here you will have to create a boot floppy with the program-broach and firmware BIOS.
And some more important nuances. Before you start, it is important to make a backup of the current BIOS version to an external storage device using a flasher program. This will allow you to return to the old version of the software in case of failure.
It is necessary to ensure stable food at the expense of "uninterrupted". Otherwise sudden sudden voltage surges will reduce all work to NO.
When bIOS flashing from Windows it is necessary to close all active applications and disable antivirus programs.
What should I be prepared for if I need to install a new BIOS?
Even a minor error in the BIOS flashing can cause serious complications. Therefore, you should prepare in advance for their elimination. In particular, if you turn off the power or the system hangs, you will have to use the programmer. Although in this case it is advisable to turn to specialists.
If the BIOS firmware is not completely completed, it is reasonable to use the following method:
- We remove CMOS from a similar serviceable included motherboard.
- In the nest we lay several threads, thanks to which it will be easy to remove the chip afterwards.
- Install the damaged CMOS.damaged analog.
- Run firmware firmware
- When the motherboard is off, we perform reverse chip exchange.
Sources:
- how to rearrange bios
If you often work on a laptop, you may receive various errors, and from time to time there is a situation where the laptop refuses to boot due to erroneous settings made in the BIOS. In this connection it is required to reset it.
Instructions
First you need to find and download a program that allows you to reset the BIOS. As such a program, you can use BIOS_PW.EXE. You can download it from the site http://intellcity.ru. After downloading it, you need to unzip the program and run it. This utility is not installed on the computer, but simply run from the archive or folder. Alternatively, you can use another program that will also help you reset the BIOS to laptop. The most optimal utility is unlock6.exe. Download from the site http://necessary-soft.net. The actions will be the same as for BIOS_PW.EXE.
Further it is required at computer loading to remember the error code which the laptop gives out. Most often, this code will appear after three attempts to enter. Now you need to enter the console cmd, and then go to the software directory ( Software). Next, you need to enter the name of the required software, enter an error code through the space, and after one space enter 0. Then you can press the Enter button. The software will generate several passwords. Try to enter each password until one of them fits.
Next, you need to go into the BIOS and insert the specified password. Now you can set the new password as empty. It is very important to reset an already existing password on the BIOS. On this zeroing the BIOS on laptop completed.
Related Videos
The BIOS is the holiest of saints in the world of computers and programming. After all, this is a kind of "beginning" of working with a computer. It is thanks to the BIOS that you can install a new operating system, delete the old one, split the hard disk into several partitions, and many more. But here's how to get into this very BIOS?
Instructions
To be fair, it's worth noting that most computers in their device are very similar. Therefore, in order to perform this or that operation, you should simply perform a certain set of actions. It concerns not only stationary computers, but also laptops.
Therefore, in order to get into BOIS, you should perform some actions in a certain sequence. Both on a stationary computer and on a laptop. So, let's begin. To start, you need to start the computer if it's off (if it's on, start the restart through the Start menu).
Then carefully look at the screen. At the bottom, an English text will appear, where the name of the key will be highlighted in large print, which you will need to click in order to enter the BIOS. Basically this key is F2 or F12. It all depends on the hardware of the computer. But, as it was said above, the most often mentioned are the mentioned keys.
When you see the name of the key, you should press it immediately. For confidence - it is better several times. Otherwise, you will have to restart the computer and perform the above operation again.
If the first time you managed to enter the BIOS by pressing the required key - excellent, you can continue to work.
When all that is needed is viewed and changed if necessary, you can go out. This is done just as simply - press the F10 key, if you want to save the changes, and exit. If you do not need to save anything, you can see the "EXIT" tab at the top of the screen. Select the tab, press Enter, and then the letter y as the answer to the question whether or not you really want to quit.
BIOS safely left behind. Log in and out successfully. The goal is achieved.
Related Videos
Sources:
- go into the bios
Typically, users log into the BIOS when installing the operating system to change the order of the boot devices. In various models of laptops installed different models motherboards, due to what the order of actions does not always look the same.
Instructions
Turn off your laptop. If you have Sony latest models then to go into the BIOS, press the F2 key when loading. If necessary, enter the password. In some models, pressing the F2 key is actual, but this is more true for older versions. In very rare models, F3 occurs. It is not superfluous to get acquainted with the specification of the motherboard.
To do this, check its labeling in Device Manager. To do this, use the "Start" menu item, right-click "My Computer". You will see a new small window on the screen with the parameters of the laptop and the operating system. On the Hardware tab, select Device Manager.
Find your motherboard in the list that opens, remember its model, find on the Internet how it will be correct to get into BIOS on this model. If you do not have the opportunity. Try to find the combination necessary for your computer by sampling and reading the manuals that come with the kit.
If you have a Dell laptop of old models, use the keyboard shortcut F2 + Esc, or some other key that appears on the monitor screen when the computer boots. If you have a Dell Studio laptop, then try the Esc + F1 key combination.
To get into the BIOS of the Toshiba laptop, use the same method as in the previous paragraph (Esc + F1), however please note that some of its models support the BIOS launch when pressing the F8 key.
If you have a Packard-Bell laptop, Gateway - be sure to see what's written on the boot screen, try using the previously worked combination Esc + F1, Esc + F2.
For some Acer, use the combination of three keys - Alt + ctrl + Esc. For rare Dell and HP models, pressing F3 for accessing the BIOS is typical.
note
Be careful when changing settings and saving them further.
Write down the combination of access for your laptop for the future.
Computers that are compatible with IBM PC, equipped with a ROM chip, which stores a special program - BIOS. It is launched immediately after power-up, checks the serviceability of the equipment and transfers control to the operating system.
Instructions
For storage bIOS settings is a separate chip of static memory, powered by a battery. Changing these settings is done using the utility CMOS Setup, which is part of the BIOS. You can not call this utility after the operating system has already started to load. Therefore, to enter it, you will have to reboot the machine or start it from the off state. Immediately after that, start quickly pressing the "Delete" key until the utility starts. If the operating system load still starts, restart, but this time, instead of "Delete" use the "F2" key. The first of these keys is used mainly in desktop computers, and the second one is used in laptops, but sometimes vice versa.
Probably, after entering the CMOS Setup, you will be asked for a password. Enter it. If the computer is foreign, and you do not know the password, do not try to bypass this protection. If you just purchased a used motherboard, and the owner forgot to turn off the password input, turn off the computer, remove the battery from the card, close the contacts of the holder (but not the battery itself), open them, and then put the item back.
