Virtually every laptop owner had to solve certain hardware problems in the mode system settings BIOS. The need to climb into the heart of the computer most often occurs when you need to install operating system, so the problem of logging into the BIOS is relevant for every active user of the laptop. Often go to basic system settings is not possible because of the banal ignorance of the keys by which it is called. This is especially true for Lenovo notebooks, because the key combinations on this model are almost always unique and do not coincide with other computers. Your attention is offered information on how to go to BIOS on a Lenovo laptop.
Go out to the BIOS on a Lenovo laptop
Login to the system change mode on the Lenovo device can be three basic hardware methods:
- The most universal way is to press the F2 key while the system is on. On some models, the "Fn"
- The second way is to use the "Think Vantage" key, which is not present on all models
- The button "Access IBM", "NOVA" - one more variant of hardware activation of the mode
Sometimes hardware methods may not work because of the features of the installed operating system. Periodically, problems arise in Windows 8 / 8.1. You can turn on the BIOS on these systems without clipping any keys - via the usual interface. Some very simple ways:
- Open the right panel, select the Settings tab - Change computer settings - Restore and update - Special download options - Reload now. After rebooting, go to the Diagnostics section, go to extra options and click on "UEFI software"
- AT the command line type and execute the command "shutdown.exe / r / o"
Exceptions to the rule - special Lenovo models
If none of the above methods of logging into the BIOS is suitable, you should look for the name of your computer in the list of special Lenovo models, where the mode is called in a specific way.
Lenovo b590
In this model, to start the BIOS, you must turn off the system, after removing the battery and for a few seconds, turn off the device off the power cable. Next, you need to click on a small button (Nova) next to the notebook's operation indicator. After starting the menu, selecting the Russian language and layout, go to the path "diagnostics - advanced parameters - firmware settings - BIOS".
Lenovo g505
On this model, the BIOS can be launched by performing the same actions as the previous one, as well as by pressing the "Fn" and "F2" keys. Clamping the keys is necessary while turning on the laptop. The method is also suitable for Lenovo g500.
Consider how you can enter the BIOS of the Lenovo G500 / G505 laptop to configure it to install the operating system windows systems 7 or Windows 8 with USB media (flash drive) or disk.
We turn on the laptop. The USB flash drive or disk must already be installed in the USB port or CD / DVD drive, respectively. To get into the BIOS of the laptop, it is often necessary to press the combination of the buttons "Fn" + "F2" during the download.
On our model of the laptop is installed the operating system Windows 8, so you can immediately start up in the BIOS, and there may be problems. Problems usually occur if the operation of the Windows operating system was not completed correctly.
To enter the BIOS in this case, you need to wait for the operating system to start loading - the download icon will appear on the screen and start spinning. See the image below.
After that, you must press and hold the power button of the notebook for about 5 seconds. The notebook turns off.
We turn on the laptop again. We often start pressing the combination of the buttons "Fn" + "F2". Now the problem should be solved.
After we entered the BIOS, go to the "Boot" tab of the main menu. If you have a regular flash drive, like ours, then in the first line of "Boot Mode" the value of "UEFI" is changed to the value of "Legacy Support". To do this, press the "Enter" button and in the resulting context window select the desired value.
Now the window of the tab changes, a new line will appear - "Boot Priority", in which the default value will be "UEFI First". We need to change it. To do this, click on the "Enter" button. In the resulting context menu select the value "Legacy First".
Next, go to the "Exit" tab of the BIOS main menu. Here, with the active (highlighted in white) "Exit Saving Changes" line, press the "Enter" button. A pop-up window appears asking if we really want to exit and save the changes? Press the "Enter" button.
The computer will go into reboot.
At the start of the system boot, we start quickly and often press the combination of the buttons "Fn" + "F2". We enter the BIOS. Let's move on to the already familiar "Boot" tab of the main menu.
On this page we find the block of lines under the name "Legacy". This is a list of devices located in the order in which the computer will refer to them in the search for the operating system to boot.
Since we will download the operating system from the flash drive, we need to raise our flash drive in the list to the first line. Now it, as seen in the image above, is on the third line (USB HDD: USB DISK 2.0).
To raise it higher, go to this line and use the combination of the buttons "Fn" + "F5". (The combination of the buttons "Fn" + "F6" omits the selected device in the list).
Now go to the "Exit" tab of the BIOS main menu and press the "Enter" button twice to save the changes. The laptop again goes into reboot.
But after the start of a new boot, the laptop will start using the operating system located on the USB flash drive.
When using a CD / DVD drive to boot the operating system, we perform all the same actions, only instead of USB devices, in the list of devices, on the first line, we lift the device located in the CD / DVD drive.
Perhaps you will agree, dear reader, with the fact that the most hard-working nation on earth is the Chinese. Well, such a concept as "labor efficiency in the Middle Kingdom" in its colossal examples can be traced literally in everything that this country produces. In our case, we will consider a universal way of solving the problem: "How to enter BIOS on a Lenovo laptop", which proves the arguments of the above. However, in this article we will cover literally all known methods of entering the BIOS on laptops from the mentioned brand. Well, which one to use, it's up to you, dear friends!
Today we will consider:
Why does a laptop need a BIOS?
In simple words, this question can be answered like this: "In order for the computer to function properly". Most likely, you did not feel satisfaction from such "spatiality" and the obviousness of what was said. However, in fact, it really is.
- The basic input / output system (BIOS) - controls the operation of all internal components of the laptop. Otherwise, it controls the hardware of the computer.
An even simpler example, the BIOS is a set of microprograms that initialize the startup process of the computing device, while checking the integrity and performance of each critical part of the computer system.
Any inconsistency due to the results of the check and violation of the instructions stored in the CMOS memory chip is an emergency deviation from the favorable load scenario with the output not the screen of the corresponding service message, often accompanied by a certain set of sounds of different tonality and unique amplitude of sound ).
In general, the basic microsystem is a kind of outpost of the electronic system with functioning programs for protecting, diagnosing and managing optimization parameters.
Why is it so important to know how to enter the BIOS on a Lenovo laptop
The default settings are set according to the system configuration. The optimality of the accepted values (parameters of the installed equipment operation) is regulated primarily by the rules of operational safety. In some cases, for example, when organizing sales of laptops with preinstalled OS, large dealer companies make their own software adjustments to the work of BIOS.
- Disaster recovery of BIOS performance (a), which also includes the frequently initialized user, the process of resetting the microsystem settings to their factory values.
- Connecting external peripherals.
- Some important nuances for optimizing individual components of the microsystem and the overall complex process of software upgrading of the computer.
- Changing the boot order and assigning a priority bootloader when it's necessary to reinstall the OS or perform the process of recovering it after a virus infection.
All of the above is only a little (however, the main thing!), That somehow requires the implementation of the standard input to the BIOS environment for the performance of the tasks.
How to enter the BIOS on a Lenovo laptop in two clicks: the method is "smart Chinese"
Indeed, on the laptops of the specified brand, the script of access to DSVV is implemented in an incredibly convenient way. Almost all Lenovo laptops are equipped with a special button "Novo Button", through which you can easily enter the holy-saints of the electronic system - the BIOS.
As a rule, such a key is located in the upper part of the front panel, practically next to the "POWER" button. It is not uncommon to find models that have a "smart Novo Button" on the left-hand side, directly next to the power connector or USB port. In any case, such a button has a graphic marking in the form of a curved arrow of the left-hand rotation.
When reading the technical documentation on the device, you can also find its other designation "OneKey Recovery", as well as "OneKey Rescue System".
- Well, after you find "Novo Button" - turn off the computer.
- Press the treasured key for quick access to BIOS settings.
- After the display shows the same name (button), use the item "BIOS Setup".
Method number 2: the classic input to the BIOS of the Lenovo laptop
Since we are talking about a laptop, it's not hard to guess that there are such functional keys as (F1-F12) on our portable device, plus a couple of FN buttons.
We will use them in this case:
- We reboot the computer.
- Press the "FN" key and press the button "F2" several times a second several times per second.
- In a fraction of seconds you will enter the primary window of the micro-system BIOS.
You can also use this way:
- Turn off the laptop.
- Turn it on again.
- As soon as the graphical progress bar appears on the screen - hold down the "Power" button until the laptop turns off (waiting 3-5 seconds).
- The next push of the button "Power" and immediately activate "FN + F2" according to the above described algorithm of actions.
What if nothing helped?
Due to technological accomplishments and the ubiquitous fast loading scenario, the following often occurs: the share of seconds and Windows is loaded. Naturally, no keys (except "OFF" or "Reset") no longer help the user to call up the BIOS menu. As for the next unsuccessful attempt to "catch the moment of entry," everything will be repeated again and again. If something like this happens and you, dear reader, it is likely to help you the method described in this article .
By the way, if you want to rid yourself of a certain predisposition of the laptop system in every possible way, when you enter the basic settings menu, you should change some parameters in the "Boot" section of your microsystem.
- After you were able to enter the BIOS, go to the "Boot" tab in the boot menu of the microsystem.
- In the first paragraph of the "Boot Mode", change the boot option to "Legacy Support".
- In the second - "Boot Priority", on - "Legacy First".
After you press the "Enter" key twice, be sure, the following login attempts will certainly be successful!
In conclusion: about what to be afraid of ...
Of course, before you change anything in the BIOS settings, you should think carefully about what such unreasonable manipulations can lead to. As a rule, after reading various manual overclocking and not bothering to question the experience of the "famous upgrade" trustful user achieves truly "wonderful results" ... sometimes even smelling of smoke! Do not be like the frivolous of this world, be wise and reasonable, friends. Well, as for optimizing the computer through the settings of the basic microsystem, this is another topic. In total, you are a trustworthy and successful entry into the BIOS!
Some users who have experience working with Lenovo notebooks, strive not only to install additional programs, but also to change the basic parameters of the device. These include security settings, touch panel functions, the choice of a certain method of image output, battery calibration, reinstallation of the operating system and so on. This requires visiting the BIOS. In addition, it stores information about the serial number of the device and other similar data. Currently, different versions of BIOS slightly differ in appearance. However, they all perform the same functions: checking the device and providing initial setting. How to get in bios lenovo a laptop? Let's try to figure it out, but first we need to get acquainted with the basic concept.
What does the BIOS look like?
BIOS acts as an important structure of the laptop. Her job is to check the system during the download process. Its interface is intuitively understandable and in appearance it is a text table. It is controlled using the keyboard. On the forums on the Internet, you can find a lot of ways to go into BIOS, for which different combinations of buttons are used. How do I log into a BIOS laptop lenovo? Below are the proven methods.
Variants of the transition to BIOS in laptops Lenovo
The first method involves performing simple actions:
Instead, it can be a key with headphones or an arrow that is near the power button or on the side (depending on the model).
- The menu appears in the display in which you Bios Setup.
The second method involves using the F 2 and F12 buttons that are on the keyboard.
When loading some models of laptops on the screen, you can see a combination of keys that allow you to enter the BIOS if you hold them for a while. In the absence of this information, there is a general scheme.
- When enabled, the F12 or Fn + F2 button is held, allowing you to enter the BIOS section to change the order of access to devices when the operating system is changed.
- When enabled, the F2 or Fn + F2 button is held to enter the BIOS main menu and change the settings to your own discretion.
- Some models of the laptop, for example, Lenovo, allow you to go into the BIOS, while holding down the F button. However, it should be noted that to reset the system here you will need special parameters, which you should know on the Internet.
It is worth noting that some models may not respond to pressing these buttons. For example, Lenovo Z50, as well as g505, b560 and others. In this case, you must use the first option.
It is important to make sure before carrying out such procedures that the laptop is sufficiently charged or it is worth connecting it to the network. It is advisable to choose both options, because a sudden power cutoff is fraught with unpleasant consequences.
How to open the BIOS Lenovo? It turns out that it is not difficult to do this. It is enough to follow the above instructions. You can also search for the user manual that comes with each laptop. There is information on how to go to BIOS. But, in principle, the data described in this article is enough to implement such a transition.
In the process of reinstalling the operating system, and also if necessary, to calibrate the batteries and in a number of other cases, the user needs to turn to basic settings portable computer.
If you do not know how to go to the BIOS on a Lenovo laptop, then it will be very difficult to implement something from the above described, and in some circumstances it is completely impossible. But what prevents you, dear reader, to learn how you can enter the computer "abode" of management?
Specialized remote button «Novo Button»
In some modifications of the Chinese brand, in order to get to the basic input / output system, it is enough to press the "Novo" key (it is also called "OneKey Recovery"). After the service menu is displayed, you must select "Bios Setup" or the item with the abbreviation "UEFI".
Usually, the button "Novo Button" is located on the front of the laptop, directly next to the power button of the laptop - "Power". Carefully inspect the top edge of the keyboard module, if you find the icon in the form of an arc-shaped arrow - this is it!
In some modifications, the "Novo Button" key is installed in one of the end parts of the case. Again, you should pay close attention to the laptop for hidden buttons. In the event that your laptop is not equipped with the "rescue" element of "OneKey Recovery", you can try the following option.
A universal way to enter the Bios laptop
In principle, using the "Delite" and "F2" keys, you can enter the basic firmware of most computing devices, including desktop modifications. Perhaps your laptop supports, so to speak, the traditional access scheme.
- Turn on the laptop.
- Hold down the "F2" button.
After a brief initialization process, the BIOS interface should be displayed on the device screen. Sometimes the procedure for calling the Bios firmware is performed by pressing the corresponding key at the time the laptop is started, as if the radio operator were transmitting the message with Morse code. But do not overdo it, the keyboard is not iron ...
Fail-safe method of entering BIOS settings
Notebooks equipped with SSD drives, are loaded quickly enough. Therefore, "catch" the moment of entry is not always possible, but often completely impossible.
However, there is a way, armed with which the user can easily and in the most correct way solve the problem being illuminated.
So, if your laptop is preinstalled with "quick" Windows 8 OS or a "super-powerful" new tenth version of the Microsoft product, follow the instructions:
- Click on the "Options" icon (a pop-up toolbar on the right).
- Next - activate the item "Change computer settings".
- Go to the "Update and Restore" section.
- On the left in the window, click on "Restore" and go to the right part of the screen, where you should click the "Restart Now" button in the "Special download options" block.
- Then - "Diagnosis".
- And the last one is "UEFI firmware parameters".
- And again click on the "Reload" button.
Afterword
Probably the question: "How to enter laptop lenovo in the BIOS? ", Now for you it is not. For those who are not helped by the information in the article, you should ask for a reference to the technical manual of the product.
It is possible that in your laptop, the button "F1" or "F12" activating the process of accessing basic settings is used as the service key.
And, by the way, cautiously with the settings in Bios, mindless and reckless changes are sometimes fraught with unpredictable consequences. Be wise and prudent in your actions.
