Today, most modern apartments and houses are equipped wireless Wi-Fi, which allows you to freely go on the Internet to all computers and mobile gadgets. If you do not have Wi-Fi while at home, then most likely you have opened this article to fix the situation.
So, what is necessary for wi-Fi connections at home? Below we will look at the main steps, from which, in fact, you need to start to set up a home demon wired Internet.
We believe that you will be happy, therefore we give you 30 days for a thoughtful and possibly modem return and care. You can return the goods for no reason, in person or through the Czech Post Office. The idea of accessing the Internet using wireless technology has been linked to the last five years. However, in recent years it began to be implemented with a relatively low price of accessories - both hardware and software - and quick connect to the Internet because of the growing need and interest of the public.
What is needed to connect a Wi-Fi home?
Step 1: contract with the provider
This step can be skipped in the event that you have already connected the Internet at home, but it works exclusively on the wire.
Today Russian providers offer users three types of Internet connection: ADSL, FTTB and xPON.
This basically works by buying an antenna, directing it to the so-called "hot spot", setting software, setting up your computer, and then just surfing. Of course, this is actually a little more complicated. In addition, the antenna, which should be located so that there is a direct visibility between it and the "hot spot", houses, trees and nothing else on the way. If the distance between the antenna and the adapter is larger, you also need to purchase an access point, an access point.
It can be connected to network map without the need for any other equipment. As for computer equipment, the computer that you usually use to connect to the Internet - for example, through a modem - is enough - but the more "the more people", the better.
Check if your house is connected to the services of a particular provider, you can on the official site, where, as a rule, there is a page for checking the connection to the house number. The situation is such that even in large Russian cities in sparsely populated streets, there is no provider's equipment in the homes, which means that the only option - use of ADSL, which is offered by the operator (the same provider) of telephone communication.
And also because a number of companies immediately reject the signal and often have a guarantee for connection. Most of them are available as paid services, but some of them are free - thirteen in Prague, one in Litomerice, Ceske Budejovice and Most. The quality of the connection is approximately the same, the technical details of the networks are slightly different - basically, the frequency at which they work. In fact, it depends only on whether the company is licensed to operate at this frequency, since long-term problems with its operation may arise if it does not have a license for operation.
As a rule, on the provider's website it is offered to choose one of the desired tariffs, each of which differs by available Internet speed and additional functions. So, as a rule, the cheapest tariff will ensure a limited speed of Internet connection during the day and without restrictions at night.
An expensive tariff will be provided by the Internet without restrictions, but it will also allow you to connect IPTV with the provision of some free HD channels.
You will find out which company offers hotspots, how to find them and many other details and details. There are other suggestions than monthly connections. As we see, prices are approximately the same. If you do not want to sign, the same tariff is available for 800 CZK per month. What are their advantages over conventional TVs? This application offers internet services and personalized websites for your TV.
If you are using a cable connection to a router, you need network cable. And it's all about fast moving things, did you know when the first hDD? It can store 2 million characters in the removable disk stack. CCTV cameras broadcast on the Internet, known as and can transmit images in real time via the Internet or through local area network.
The choice of the tariff is carried out solely on the basis of your financial capabilities and preferences. But we draw your attention to the fact that if you are not going to purchase a separate Wi-Fi router, see that it is provided free of charge by the provider at the chosen rate.
Choosing a tariff, you will usually be offered or make a call to the provider, or fill out a form to call a specialist.
Once the system is configured, the only requirement is to have access to the Internet. You can control even more video cameras on your tablet or smartphone. Some models require a good understanding of the technology for installation and ensure their functionality, but this is becoming an exception, not the rule.
Many types of cameras have their own applications that make recording and watching videos very simple. It depends on the producers. If you happen to buy a camera that does not include any software, then you need to buy an additional one.
Then, at a specified time, an expert comes to you, who concludes a service agreement with you, provides equipment, and immediately performs its connection (the task is easier if the provider provides its router).
Step 2: Purchase a Wi-Fi router
It connects to the Internet very simply, like any other device, such as a printer. Depending on the type of camera, it can store images on a memory card or other device or transmit live images on the Internet. Some of these cameras have a built-in motion detection function. When the sensor detects movement and is set to the alarm module, it immediately starts shooting and warns you at its mobile phoneto stay abreast of events when something happens in your home.
For these security devices, 3 types of networks are used. Wired networks. This is the safest and fastest way to connect to the Internet with a low probability of interception or interference. They are slightly slower than wired ones, and there is a risk of interception by villains.
In the event that you have a wired Internet connection or if you did not provide this equipment when signing a contract with the provider, it must be purchased separately.
If you purchase the router separately, then this task should be approached with all responsibility, given the choice of many nuances. On how to choose the right one Wi-Fi router for the house, before it was told on our site.
However, this risk can be minimized by installing firewalls - firewalls - but can not be completely eliminated. Cellular networks are the slowest, but more secure than wireless ones. This type of camera is slightly more expensive, especially those cameras that transmit high-resolution images.
Why do I need to turn on the camera? Compression technology and image resolution. Resolution of the digital image is measured in pixels. The more detailed the image, the more pixels it is made, and, therefore, the more data it contains. For a detailed image, more space is required on the hard disk and the transmission capacity.
Step 3: Connect the router to the computer
So, you have everything to establish the Internet - it remains only to configure it. While the router is not configured, Wi-Fi will not work on it. You also need to connect the router to the computer.
To transfer images over a network, the data must be compressed to reduce data consumption. If the bandwidth is limited, the cadence frequency may decrease when transmitting a live image, or a slightly lower image quality may be selected.
Thanks wireless network your home you can broadcast thousands of online radio stations and your audio library. Just tap your finger and enjoy an inclusive soundtrack in the room. This compact compact system will sound in any room. Patented waveguide speaker technology provides quality, disproportionate sound from such a small system.
In the modern age of the Internet, it exists in almost every family. The World Wide Web has plagued its numerous sites, forums and social networks the whole world. And for sure, in addition to the usual stationary computer, you have at your home a few more high-tech devices, from which access to the Internet is also possible. However, how can it be adjusted without encasing an apartment with kilometers of endless wires? Today we will talk about how to make wi-fi at home.
These four letters have recently entered our everyday life, but are already familiar to everyone who deals with computers. In fact, it is an adapter for wireless access to the Internet from virtually any device on which it is installed. Conveniently? More than. Judge for yourself, because you will have complete freedom of movement around the apartment without fear of hitting or damaging the wire or cable. After all, the coverage area of this device usually reaches 100 meters. Enough even for the royal mansions. Want to learn how to make wi-fi at home? Then read on.
There are several ways to create a wireless Internet access point in your apartment. The simplest is the purchase of a special modem, which already contains (in other words, a router). By making such a purchase, you eliminate yourself in advance of the need to connect additional equipment and all related complications. The settings of such a device also do not contain anything supernatural.
How to create wi-fi yourself without using additional devices? If you have a smartphone or laptop that already has an Internet connection (in the first case it can be mobile network, and in the second - 3G modem), then they can serve as a source of wi-fi. It will be enough to specify in the settings of the device the possibility of using it as an access point.
How to make wi-fi in your apartment, if you already have an Internet connection through a regular computer (namely its network card)? Here you will need to purchase an additional device - a router. It is this small box, in its dimensions, that will distribute the available Internet through the air. However, the connection can take you some time and cause difficulties. Especially it concerns those who can not call themselves a specialist in this field. Below, we will show the maximum detailed instructions to the standard form of the modem.
The peculiarity of the router is that now it will be connected to the Internet, and not a computer, as it was before. The corresponding cable will be connected to it. through a router? First of all, you need to connect it correctly. The cable that used to connect to the Internet should be inserted with the free end into the device. Do this through the connector with the WAN inscription, which is very important for the correct operation of the router. That cord, which was originally bundled with the device, should have two plugs at its ends. One of them is connected to the network card of your PC (to where the Internet cable was previously), the second one is inserted into the router, but already into the LAN1 type connector. Strictly speaking, the technical part of the process is over, the device is ready for use. It remains only to prescribe all the necessary settings, and we can assume that we still answered the question about how to make wi-fi at home.
Do not forget that there may well be voltage surges on the electrical network. If you regularly watch this in your apartment, then you should buy an uninterruptible power supply (UPS). It will protect your equipment from possible damage.
Do not forget to pre-program your wi-fi access point. Otherwise, your precious Internet can be used by anyone who wants in the radius of the coverage of the router. In addition, it will significantly reduce the data transfer speed for you. So this is the main sign that someone is using the router on a par with the owner.
