Tune sony bravia TV for digital broadcasting. Tuning digital channels on Sony TVs

Computer literacy

To begin with, we present a list of televisions currently known that have the ability to receive digital cable TV DVB-C standard.

SONY BRAVIA

Almost all models with letter indices D, S, W, X, V, E, Z and a diagonal of 32 inches or more. series: 3000/3500/4000/4020/4030/4050/4210/4500/4710/5300/5310/5500/5510/5600/5610/5710/5740

LOEWE

Almost all models.

SHARP

model: 46 (52, 65) XS1, LE700

PHILIPS

series: ** PFL **** H (in the search menu: Country - include Sweden)

Toshiba

series: AV633 / RV633 / AV635 / RV635 / XV635 / V635 / SV685 / LV685

JVC

series: LT32DC1BH, LT26DC1BH

Panasonic

series: TX-P42G10

Lg electronics

(in the search menu: Country - include Sweden)

  • LCD TV series: LH2000, LH3000, LH4000, LH5000, LH7000, LU4000, LU5000
  • PLASMA TV series: PS3000, PS7000, PS8000, PQ200, PQ300, PQ600

SAMSUNG

decoding of SAMSUNG TV models:

  • 1 character - type: L - LCD, U - LED, P - plasma
  • 2 character - region: E - Europe, N - North America, A - Asia
  • (hyphen)
  • 3.4 character - diagonal in inches
  • 5 character - year of issue: A - 2008, B - 2009, C - 2010, D - 2011
  • 6 character - series
  • 7,8 (, 9) characters - subseries

    • DVB-C receiver is built into all models from 2009 (letter index B, C or D)! Before tuning, you need to set the following parameters in the menu: Country - Slovakia or Slovenia, Auto search for digital and analogue channels, Source - Cable, Full.

    General algorithms for tuning digital channels for different models of LCD TVs

    SAMSUNG

    1. Click on the entrance to the menu - (green button);
    2. Choose in the menu - "Channel" (the icon "Satellite dish");
    3. We choose - "Auto-tuning";
    4. We choose - "Digital + analog";
    5. Search mode - "Full";
    6. Click - "Start"

    PHILIPS

    First, we read the stickers on the back of the TV, where separately for each tuner (DVB-T and DVB-C) there is a list of countries in which, according to Philips, there is digital broadcasting (at the time of TV release, but if you update the firmware through their official site, this list may change in subsequent firmwares). If our country is not there, then you will have to put some other from this list. For philips TVs the step between frequencies should be eight. Search mode - "Full".

    1. Click on the icon - "House";
    2. Choose - "Configuration";
    3. We choose - "Installation";
    4. We choose - "Digital mode";
    5. We choose - "Cable";
    6. We choose - "Automatic";
    7. Click - "Start".

    The setup takes about 5-10 minutes.


    Philips TV models 2011

    1. Click on the icon - "House";
    2. We choose - "Installation";
    3. We select "Search for channels";
    4. We select - "Reinstall channels";
    5. We choose - "the country that is indicated on the sticker on the rear panel" (usually France, Finland or Germany);
    6. Select the digital mode - "Cable (DVB-C)";
    7. In the line "Network frequency" we drive in the frequency;
    8. In the line "Baud rate" we drive in "6875";
    9. Next, select the line "Frequency scanning".

    The setup takes about 5-10 minutes.

    Lg

    1. Press the button - "Menu";
    2. Choose from the menu - "Options";
    3. We choose - "Auto-tuning";
    4. Choose a country - "France, Switzerland, Sweden or Finland";
    5. Select the signal source - "Cable";
    6. We choose - "Digital";
    7. Click - "Search".

    The setup takes about 5-10 minutes.

    SHARP

    If your TV model provides reception digital channels, but the item "DTV MENU" is missing, then we pre-select another country - France, Switzerland, Sweden or Finland.

    1. Press the button - "DTV";
    2. Press - "DTV MENU";
    3. We choose - "Installation";
    4. We choose - "Autoinstallation";
    5. Click - "OK".

    The setup takes about 5-10 minutes.

    SONY

    Since not all SONY models are equipped with a digital cable TV tuner (DVB-C), you need to check your SONY TV model. Models equipped with a DVB-C tuner are marked KDL - ** EX *** or KDL - ** NX *** - for example KDL-32EX402R2 the first 3 letters in the model name (KDL) just indicate that the TV is "digital" ... For KLV models - ** BX *** etc. tuners DVB no.

    1. Press the "MENU" button (for some models it is called "HOME" on the remote remote control (hereinafter referred to as the remote control). This button is usually of blue color;
    2. We select the item "Settings";
    3. Find the “Digital Configuration” menu in the list of settings, enter it;
    4. Select the item "Autosearch digital stations";
    5. The source selection window will open - select the type of TV connection. Select "cable";
    6. In the item for selecting the type of scan - select the "full scan" mode:
      1. Or select the item "Manual";
      2. Next, enter the frequency;
      3. We leave the access code "Auto". Next, enter the symbol rate;
    7. Click start.

    Wait for the TV to finish searching for channels.

    Pay attention to the bottom of your TV's OSD. The bottom panel of the menu displays prompts with which buttons on the remote control to perform certain actions in the TV menu.

    Panasonic

    1. Press the button - "Menu";
    2. We select the item "Settings";
    3. In the window that appears, select "Analogue menu. settings ";
    4. In the window that appears, select the item "Add TV signal";
    5. In the table that opens, put a tick on the line "DVB-C" and, going down below, press "Start auto-tuning";
    6. After searching for all digital channels, going to the main menu in the "Settings" item appears the line "Menu dVB-C settings". By selecting this item, you can correct the setting in manual mode (set the frequency and speed) .;

    Your TV menu may differ from the suggested model. In this case, you need to find tabs that are similar in meaning. If your TV will ask for a seek step, specify 8 MHz.

    The instruction on how to set up a Sony TV is universal, suitable for almost all models. The menu interface is similar, therefore it does not differ significantly.

    Experts note that the Sony plasma menu is more complicated than that of other brands of TVs. It is sometimes difficult for the user to understand the incomprehensible designations of additional functions that the panel is equipped with.

    Before connecting the device to the mains, you need to check if all the cords are connected correctly, if they are firmly attached. After turning on the TV, you need to wait for a while, that the installation of the system has been completely completed, only after that you can proceed to the basic settings of the Sony TV.

    All actions are performed using the control panel. Options such as sound, picture, internet connection and speaker system must be set in the "HOME" menu. This is the main tab, all required settings Sony TVs are performed in it.

    Automatic channel search

    Tuning your Sony TV starts by searching for TV channels. It runs automatically on newer models. To start the operation, you need to hold down the "MENU" button for a few seconds, the TV screen will show standard settings on the search for TV channels.

    During the procedure, the TV screen will display the noise and the channels found by the device. When the search operation is over and the channels work in established order, the screen will function normally.

    Search for digital TV channels

    Digital channels are configured as follows:

    1. Go to the "Main Menu" tab by clicking home button on PU.
    2. Select the section "Digital configuration", if there is no such section, then select "Autostart" and go directly to stage 5.
    3. The " Digital setting"-" Automatic search for digital stations. "
    4. Select cable type connection.
    5. You must enter the parameters required for the search.
    6. If all actions are performed correctly, the device will find available digital programs for viewing.
    7. To turn on the internal clock, perform the following steps: "installation" - "digital configuration" - "technical configuration".
    1. In the tab that appears, select the GMT time zone .

    This is the basic way to tune digital channels on your Sony TV.

    In order to install channels on Trinitron models, you must adhere to the following rules:

    1. Press simultaneously two keys on the remote control (up arrow and right arrow).
    2. Use the PROG button to select the channel number to be set.
    3. Press the button (up arrow) and the keys next to it.
    4. In order for a sound to appear, hold down the key (up arrow), as well as the key with an asterisk.
    5. Remember desired channel and press two buttons on the remote (up and right arrow).
    6. The operation is complete.
    7. If you cannot find the TV in this way, it means that the device has problems with the memory unit, repair is needed, it is recommended to contact the technical center.

    The best option for how to tune channels on a Sony Trinitron TV. Detailed information can be found in the instructions supplied by the manufacturer to the device... If there is no hard copy, it is recommended to find its virtual version on the company's website. The user needs to thoroughly study the instructions for his model in order to avoid problems while connecting the equipment.

    Also read, and.

    Preparing to set up your Sony Bravia TV:
    Install the dish and aim it at the EUTELSAT W4 satellite (36B). Details about the coverage area of \u200b\u200bthe Tricolor satellites and the direction of the satellite dish in your locality are indicated on the Tricolor website. Write down the parameters of the local oscillator frequency indicated on the converter of the satellite dish.

    In our case, the upper frequency is 10.75 GHz

    Make sure the TV is turned off. Connect the cable from the satellite dish to the satellite dish input of the TV marked with:

    Install a smart card with your subscription into the CAM-module (DRE-Crypt CI + module) provided by the satellite TV operator:

    Install the CAM module (CI module) into the corresponding slot on your Sony Bravia TV marked with the icon:

    Note: it may be necessary to first remove the safety plug from the CAM connector of the DRE-Crypt CI + TV module

    Setting up your Sony Bravia TV

    1. Turn on your TV and go to Settings -\u003e Digital Setup -\u003e Auto Satellite Tuning

    2. Confirm the start of Auto Satellite Tuning.

    3. Select a satellite dish configuration. With the usual individual satellite dishes the parameter should be selected

    Fixed Antenna or DiSEqC (default). Click "Next"

    On the page select scan page, leave the default settings and confirm - "Next"

    4. Select the first satellite (Satellite 1) and press the center button on the remote control to enter the settings menu:

    5. Select the "LNB configuration" item and enter it:

    6. In the items "Lower LNB range" and "Upper LNB range" enter the corresponding values \u200b\u200bof the converter local oscillator (see item 2 of the "Preparation" section). In our case "LNB Low Range" by default matches the corresponding LO parameter. And "LNB High Range" is not. Enter the appropriate values \u200b\u200bfor this parameter in megahertz (10.75 GHz \u003d 10750 MHz) and confirm:

    7. Return to the previous sony menu and pay attention to the item "Transponder". This item directly configures the parameters for receiving program packets. The default transponder settings in the TV menu are the same as the Tricolor TV transponder settings in the western region.

    For this reason, no changes are required in this item. It may be required if the signal settings are changed by the satellite TV operator or TV settings in other regions.
    If the antenna connection and input initial parameters completed correctly, the screen will display an indication of the signal quality and level.

    Return to the list of satellites and click "Start".

    8. Scanning of radio and TV channels starts, during which the progress and the number of found TV channels (programs) are displayed

    9. Setting up your Sony Bravia TV is now complete. The number of channels found may differ depending on the current set of programs broadcast by the satellite TV operator. Now you can either exit the setup menu or immediately sort the channels by pressing the corresponding button at the prompt.

    Attention! Some of the found TV channels may not be available for display if they are paid and are not included in your subscription plan with a satellite TV operator.

    Tuning digital channels on Sony TVs

    (on the example of the KDL 32EX 402 model)

    Depending on the model, the interface and menu structure may differ, but the general meaning and order of actions remains relevant.

    1. Enter the main menu by pressing the button on the remote control. In the "Preferences" section, select "Settings"

    Attention! Some models may ask for a PIN at one of the setup stages. If you did not install your own, try entering one of the standard ones: 0000, 1111, 1234

    2. Select "Digital Configuration"

    Attention! If your model does not have this item, you can select the "Autostart" item and go to action number 5

    3. Select "Digital Setting"

    4. Select Autosearch Digits. stations ".

    5. Select the connection type "Cable"

    Attention! If your TV does not offer you to make this choice, then either you need to specify the country (this can be done in the menu "Settings"\u003e "Settings"\u003e "Auto search")

    6. Enter channel search parameters:

    Scan Type Fast

    Frequency (start frequency) 306000

    End frequency 354000

    Symbol rate 7000

    Modulation 128 QAM

    Network Access Code (Network ID) Auto

    Some parameters may not need to be entered depending on the TV model and country selected

    7. If everything is done correctly, then the TV should find about 58 TV channels

    8. After searching for channels, you need to adjust the internal clock of the TV, for this return to the main menu and follow the following route:

    Preferences\u003e Settings\u003e Digital Configuration\u003e Tech. configuration"

    9. In the menu that opens, set the time zone "GMT"

    Attention! Depending on the year of manufacture of the TV, you will need to enable or disable automatic daylight saving time


    Ilya 97590

    Existing the lineup Sony Bravia TVs are a direct confirmation of the intellectual and technological development of society. Today we will talk about connecting digital broadcasting on Bravia TVs.

    What is digital television? What are the signal formats? How to connect and set up a Sony Bravia TV? Answers to these and other questions, as well as useful information about paid channels and how to decrypt them, we will analyze below.

    How to connect and tune digital channels on Sony Bravia?

    Digital and analog TV has a number of significant differences. The first is the quality of the image, of course, digital TV takes precedence here, just like the low probability of interference. In addition, some channels can be broadcast with subtitles, or, for example, users can choose the appropriate one by themselves. sound track... You will find more detailed information on this in the instructions for the device.

    Digital TV can be connected using set-top boxes that can be provided by providers. Most likely, you even use such devices yourself. And innovative Sony Bravia TVs can broadcast digital signal without any additional equipment, but using a conventional antenna. As a bonus - excellent picture quality.

    For competent setting digital TV on your Sony Bravia TV, you need to know which type of signal will be processed. There are several ways of transmitting data: via an antenna, using cable broadcasting, via a satellite signal. Today we will talk about connecting digital television through the antenna socket.

    Step-by-step instructions for action

    For correct setting your TV, you also need to find out the type of connection: DVB-C (cable TV) or DVB-T, DVB-T2 ( broadcasting), speaking in simple language - cable or ether.

    So, with your device connected to a power source, you can get started. Tuning digital channels on Sony TVs is not so difficult, here we need a remote control. Those who activate Bravia for the first time will need a little more time, because first you need to go through the very first stages of setting up digital TV ().

    Users who have already activated the Bravia function can proceed to the next step, in the main menu. Then, step by step, select the menu items: "Settings" - "Digital configuration" - "Auto search for digital solutions". Running automatic search digital channels will occur after confirming the selected action. The process itself will take a small amount of time, after which you can easily select your preferred channels by pressing the button in the center, and use the arrows to assign them positions in the list. The blue button will delete the channels you don't need.

    For most cases, connecting these settings will be sufficient. Special parameters if necessary, you will find it by switching to manual search mode.

    Additional Sony Bravia features

    TV guide

    In addition to the features described above, Sony Bravia, users can use the TV guide. To do this, you need to find the "GUIDE" button in the main menu. Open table - information about channels, where on the left - the serial number and name, and on the right - the time of the broadcast. Using the arrows, you can control their positions, and the "INFO" button will give short description the selected TV show.

    The GUIDE function will open up the possibility for you to choose your own scenario for watching your favorite programs by turning on the timer or recording, which means that you can save the programs into the memory of your TV. Pressing the "OPTIONS" button allows you to select whether the GUIDE function works: simple or with additional features... For the latter, you must run a search guide. detailed information about gears, selection similar programs to the ones you liked earlier, and much more - all in this mode work.

    For clarity of the stages of transition to the extended mode of the guide: "HOME" - "Settings" - " System settings» – « General settings"-" GUIDE ".

    Subtitle function

    One more function cannot be ignored - the inclusion of subtitles in several languages, just imagine! But, you need to take into account the fact that this function is not applicable to all channels and TV shows. To activate it, you need to find the corresponding button on your TV remote control.

    Decoding paid channels

    After all the settings and connecting the functions you need, you will find that some channels are unavailable for viewing, encrypted, since they are paid. If you want to remove the cipher from a channel, you will need a CAM, a kind of key that plugs into the back of your TV. Connecting the module with the transition to sleep mode and activation of BRAVIA will allow you to start watching your favorite channels without restrictions.

    Enjoy your leisure time!

    tell friends

    Did you like the article? To share with friends:
    You may also be interested in