You bought a Chinese smartphone, and then suddenly there was a need to go to Recovery... Well, that, there is nothing to do - turn off your smartphone, hold down Vol (-) + Power, and the download went into recovery mode. And what will be your surprise when Recovery opens in Chinese. They did not expect? And you, after all, they said, 10 years ago, learn Chinese! Didn't you listen? But in vain.
Well, okay, I don't know Chinese either, maybe just a couple of words, so let's think about how to get out of the situation. There is a very simple option, which I will write about below.
The easiest option
On Chinese smartphones "from the basement", and not only often, there are two Recovery: in Chinese and in English. I hope there are no problems with English. To get into the English version, you need to hold down Vol (+) + Power, sometimes vice versa (you need to try two combinations). If there is a Home button, then you can also use it. Chinese friends are great dreamers, and are able to hide the recovery in the most inappropriate place for this.
Decoding the recovery in Chinese
Okay, nothing worked out for you, since you are reading this paragraph, then let's figure it out with Chinese. We can do this, because when entering RulSmart, each visitor is given a free energy elixir, which will be the envy of both Asterix and Obelix, because it gives intellectual power to the level of the emperor of philosophy.
Before any manipulations with your pens, you need to make a backup so that you can roll back later, ok?
Usually, people (and nonhumans too) need to reset the settings via Recovery, and it is in Chinese. So we will figure out how to do this using Pushkin's developments.
Instructions
- Go to Recovery
- We select an incomprehensible item in which after the hieroglyphs is written MMC.
- You push power button, the reset went. Now once again, gone into a reboot.
4 ways to reset graphic key, get rid of glitches and brakes on chinese phones on MTK. 3 way Hard Reset using Lenovo A808 as an example. 1 way: Menu-Settings-Reset. 2 way: Press together the volume button UP and the POWER button, hold it at the same time until the display lights up, release the power button, and continue to hold the + button, the robot will light up, press the power button (in some cases, the up button, in some minus, in some at the same time + and power button), and we get into recovery, select the line Wipe data \\ Factory reset, confirm with the power button (sometimes with the up button), go down to the YES line, and confirm with the power button (sometimes with the up button), wait for the end, and select the Reboot line with the power button ... Method 3: Press together the volume DOWN button and the POWER button, hold it at the same time until the display lights up, release the power button, and continue to hold the button, after a few seconds the testing menu will appear in Chinese, we are interested in the line with the only English word eMMC, point it with the button down and select with the power button, wait for the end, if it returns to the previous menu, remove the battery, insert it and try to turn it on. 4 way - this is the firmware, but the firmware is individually selected for a specific device, it is difficult to do it yourself. ATTENTION Remember, if you have Android 5.1, 6, 7 and higher, before doing a factory reset, be sure to exit google accounts, Samsung Account, Mi Account, Flyme, and others, if you do not do this, after the reset, the corresponding lock will work, which is EXTREMELY HARD, and sometimes even impossible to remove If the solution from the video did not help you, try one of the following combinations: 1. + and food. 2. - and power supply 3. Hold power for 2-3 seconds and then press minus 4. Hold power for 2-3 seconds and then hold + 5. 3 keys simultaneously Plus Minus and power. All combinations: as soon as the backlight lights up or the vibration is triggered, release the power and hold the remaining keys until the recovery turns on or something else similar to it. AND MOST IMPORTANT, REMEMBER THAT EVERYTHING YOU DO IS YOU DOING UNDER YOUR RESPONSIBILITY AND IF YOU HAVE DOUBTS, I STRONGLY RECOMMEND TO CONTACT THE SPECIALISTS
Date: 2018-09-21 Tyzhprogrammer
Rating: 4.0 out of 5
Votes: 1
Comments and opinions: 30
1. Alexander
Please help me. My world space phone 5g turned into a brick.
Forgot password. I threw off the hard reset. Removed settings via keyboard options. Launched, was delighted. Began to re-download the programs. The settings offered to update the software. Updated. Restart and a picture with a lying android. There is no team.
Now the menu recovery is called, but the reset factor is useless. I spend it, but rebooting again gives an android and there is no command. Already 50 times I made a reset, but nothing was reset.
Launched the scan option in the recovery menu, writes about modified files. Apparently from a software update, but they are not deleted by a reset. There is no rollback to factory settings.
Also, the menu recovery in Chinese is not called up now. Previously, English was called volume +, and Chinese volume -. Now the combination of on and loud has no effect at all.
The phone is monolithic, the battery cannot be disconnected, there are no slots for a memory card. There is no way to connect to a computer either. And I can't take it to the service. We don't have this here.
Any thoughts on what to do in order not to throw it away ???
2. SVYATOSLAV
i have a problem on the Lenovo tablet ... I updated the televon so I needed it in order to remove the overlay forever. after the update, after half an hour, the black screen shows an error occurred in the android application .. I turned off and rebooted and everything is the same ... then I made a complete reset and not by any means I can’t go into my account .. I write we can’t enter for unknown cause .. I’m standing as he writes the default settings ... and the problem is that I don’t have without calling no settings, nothing I can not do to enter the settings and disconnect .. tell me what to do with this problem ... and it does not reset either
3. Natalia
I have Bravis Omega, it started to freeze when turned on, reset to Zovad settings ... Everything started fine, set up the previous applications, I'm happy, everything is okay, in a day our song is good, start over ... (started to fade and reboot and hang on startup ) I repeated the procedure ... I set it up again with one SIM card, turned it off to put the second one ... And when I boot, I am healthy again. What is the reason, how to treat?
4. MiFix
A man I'll try your advice right now, otherwise someone sent a message to my dad, I went to his link and now the phone just did not work, did not go into the phone settings, I can’t call, I don’t need an eye, and the application could not crash to him, so the bastards sent a virus or what is I don’t know, now I’ll try your advice 2 and 3, I knew about 1, but the message does not go into the settings after that
5. Are
i did everything as in method 2, and it seems like everything was updated, but the error "error in the ContactManager application" pops up on Lenovo A850 + every second, so much so that it is not realistic to use the device, and by the way, I have 2 way, that is, clamping the button shutdown + the upper volume button worked like you did in method 3, that is, a menu with iroglyphs and emms opened
6. Bakitchanov
i could not get. The problem is that I bought a new battery. The old one has deteriorated. I put a new battery in the phone. first shows the picture the display, and then dark screen and so on. Well, I tried how you held down the power button and the volume + does not work, what to do?
7.Igor
Huge hello
Received such a phone: when turned on, SUSAN is written on the screen - under the "battery" - M5, it loads and then asks for a password ...
It is impossible to reset using known methods, we tried all methods of calling Recovery or something similar ...
What can be done?
Help, PLIZ
8. Inkognito
I have a Lenovo S920, an error occurred in the "Contact Manager" application, I can't call anyone, I can't see the missed calls. I reset the settings several times in the first and third ways, the second for some reason does not work. After resetting for a few minutes, everything works, then again the same error. What to do?
9. KSK
all this is of course very interesting, but so I bought an ERGO A503 OPTIMA smartphone and decided to get ROOT-rights, pressed the buttons and went to the "recovery" menu and there are a few items only in Chinese (and in hieroglyphs) how where to look for which item of what means here's how should I install CWRP-recovery and where can I download SUPER SU?
10. Ruslan
Hey. Help pliz with LG Tribute 5. When updating LG software, Android's corpse appeared. The first reboot option (via the menu) is not suitable, since the phone does not turn on. I try the second option, at the end after restarting the corpse again. There is no third option, since MMC does not turn on (up + power). What to do?
11. fox
I had old phone it had an application that did not allow entering settings and other applications without a password
I just held this application with my finger to drag it to main screen and there you could find out about this application or delete it, I just deleted it and that's it
12. Paata
i have irulu u2. worked fine for 5 months, then stopped taking wifi signal, the device sees the signal sources, but does not connect, the antenna does not tan. but the access point works, you can distribute the Internet. I reset through the menu, but it did not help. what should I do? :(
13. Leon
Tell me, how is Hard Reset different from flashing? If my phone started to reboot constantly and I suspect that this is some system errors, then in my case hard reset will help? Those. Is there a clean factory android somewhere in the device's memory?
14. Virineya
i thought that sbosob 2 should be done with the phone on, it turned out that on the contrary, it was necessary to turn it off and then do everything that was needed))) Thank you very much)))) I could not do it in a simple way in the settings and method 2 helped me very quickly)))
15.stcube84
tell me what to do with "wiko robby" is unpleasant, but the fact that it has become a brick, after an offline update it does not start. writes an error, watched the video and tried it on my own, something did not help me ((("there is no command" after restarting.
16. Rest
The nomi i500 phone does not turn on after reboot, it just flashes .. I did all the manipulations, but it continues to flash. A week ago I did a reset to the factory ones using the second method and everything worked out right away. Hike now he covered himself with a copper basin: ((
17. Belladonna
on a second-hand phone with a graphical private key, they could not reset the power button and volume, this combination did not work, they were tormented by the selection of the key, they only had to look for the previous owner of the phone, he unlocked
18. Princess
Hello, I have recently not been able to enter the settings and messages on Saomi redmi 3c I press they open and immediately collapse. Can you please help me if I reset to factory settings?
19. Boris
If everything is done correctly, everything works. Programmer, I have a different topic ..... after resetting through the settings of the bodies .... the bodies generally became stupid ??? What to do???? About its angle ?????)))))) Or try a second time through the recovery?
20. Paper
There is no recovery on the tablet, there is no test menu and the data reset button is blocked by a virus, what to do.
Cr4 I did everything, I just threw the tablet out the window, thanks for the video that didn't help me)
21. Fidail
Thank you so much, your video helped a lot to unlock the Chinese phone. Chas 100. I was looking for a firmware for it in the internet for a week, I could not find a suitable one. I helped out great, all the best to you
22. Lombi
I didn't have one method that did not help what to do, some China pops up and there is nonsense and I cannot, but through the settings there I press to cut everything out and nothing happens 100 times poked and nothing
23. Paul
I have LENOVO 3GW101 Chinese and english languagehow to remove all settings and start with blank slate... And then I pressed a lot and I have to reinstall everything again.
24. Deku
Answer please. What to do if no method returns old version android? And when hard reset via eMMC gives an error: "eMMC is busy cant format. please retry"
25. Neko ™
thank you, gigantic, my phone stuck and did not want to accept correct password here is your video) I can't unblock syayab for a week)))
26. Elite
Thank you very much Good luck, success, kindness and all the very-very I already wanted to throw my phone away, and then I saw this video Thank you very much.
27. Vlad
Short, informative, helpful.
While watching the video, he already threw it off. The problem is that I have everything in Chinese and there was a question of choosing a reset line.
28. Andryukha
It does not work on Lenovo On the Samsung without a problem But you need a bit on the Lenovo tablet. Highlights 3 options but they are something about sound but not preload.
29. Cat
My tablet does not turn on, so option 1 disappears right away ... 2 and 3 were also not successful (What should I do? Tablet model: roverpad Sky A70 3G (TM772)
Many situations can lead to the need to reset the Android system settings, for example: frequent freezes of the device, android system cannot boot or the gadget unlock password is lost. "Hard Reset" is a radical solution to get your device back on line.
Looking ahead, I note that "Hard Reset" deletes data only from the device's memory, without affecting the SD memory card, although there is option 2 that allows you to affect it.
Attention!!! All contacts will be deleted installed applications, messages, etc. It is highly recommended to back up your phone data before starting the reset operation! One of the methods reserve copy — .
Option 1. Recovery Mode
Turn off the machine and boot into Recovery Modeholding several keys together. Each manufacturer has its own buttons:
- "+" on the volume rocker and the "ON / OFF" button;
- "-" on the volume rocker and the "ON / OFF" button;
- Volume "+" and "-" together and the "ON / OFF" button;
- Volume "+" and "-" together, home key and ON / OFF button;
- In Chinese devices, hold down the volume key and plug in the charger.
The volume up / down buttons move up and down the recovery menu, and the command is selected using the ON / OFF button. In recent devices, control in "Recovery Mode" can be normal (touch).
Select "wipe data / factory reset", and confirm the system reset by selecting "Yes - delete all user data". When the wipe is complete, select the "reboot system now" option.
It will be a little more difficult to see the reset on Chinese phones. For example, in "iconBIT NetTAB Mercury XL" or clone " Samsung Galaxy S4 GT-I9500 "recovery menu in Chinese. If you have the same situation, the picture below shows the Russian translation of the" Recovery Mode "menu.
To navigate the menu, use only the "-" volume key, since the "+" key is used to return one level up. Press the ON / OFF button to select the highlighted command.
To run a full reset of Android settings in Chinese phones, you need to select the 6th item. What's funny is that after the selection, the command will be executed without confirmation.
After a few minutes of waiting, your Android device will boot up as if it was first launched after purchase, possibly with a request to add a Google account.
Option 2. Recovery and reset
IN android settings you can see an item such as "Restore and Reset". It is designed to reset system settings and recover from backup saved on the Internet.
Click on the "Factory data reset" option.
Scroll down and optionally check the "Clear phone memory - card" option to delete personal data from the SD memory card such as photos, music and other user data. Click on the "Reset phone settings" button.
User data will be deleted and factory data restored.
The need to reset Android settings can arise in completely different situations: the device starts to freeze, or you simply cannot unlock it. And if no actions helped to solve the problem, Hard Reset is a real opportunity to restore the device's performance. This article will tell you what to do.
(!) If you forget your pattern, PIN, or password, read these instructions first: and.
Well, if after these manuals you still need help with unblocking or you have other problems with the device, read this article carefully. It is worth noting that after Hard Reset, only data from the internal memory will be deleted from the phone or tablet. Files, photos, music, videos, etc. located on SD. will remain intact.
Method 1. How to reset settings on Android via Recovery
The first method is relevant for those whose device does not turn on at all, malfunctions, or you need to restore access to the smartphone system:
1. Turn off the device.
2. Now you need to get into recovery mode... To do this, you need to hold down and hold a certain key combination until the screen lights up. Depending on the manufacturer of the device, the combination may differ:
- Volume down + power button
- Volume up + power button
- Volume up / down + Power button + Home button
- Volume up + volume down + power button
How to enter Recovery Mode on phones of various brands is written in.
Using the volume up and down buttons, you can move up and down, respectively, and confirm your choice with the on / off button. On newer devices recovery menu can be touch.
3. Select "wipe data / factory reset".
By doing this, you consent to the cleaning of the internal memory of your smartphone / tablet.
5. And at the end "reboot system now".
The whole process will take less than a minute. After all the actions Android phone or the tablet will reboot - the factory settings will be restored. You will receive the device as it was at the first start.
Meizu recovery mode
Meizu made their own recovery mode instead of the classic Recovery. To get into it, use the combination "ON" + Volume "UP". Check only the "Clear data" item and click "Start".
We perform Wipe from Recovery on Xiaomi
The Xiaomi engineering menu is loaded when you hold down the power and Volume "+" keys. It is available in multiple languages \u200b\u200b- to switch from Chinese to English, click:
1. Select "Recovery"
2. Click "OK" if you are going to enter Recovery mode.
3. Click "Wipe data". The sensor does not work here, use the power and volume keys to select and move.
5. Confirm by clicking "Confirm".
6. The device will inform you of successful Wipe. Open the main menu.
7. To reboot your smartphone, select "Reboot".
8. Then "Reboot to System".
Method 2. How to make a Hard Reset through the settings
1. Go to Android Settings.
2. Open the "Restore and reset" item. Don't forget to follow through.
3. Select "Factory data reset".
4. Then tap "Reset phone (tablet)".
5. If you have set a pattern or password, you need to enter it.
6. Finally, click on "Erase All".
After that, all data from the internal memory of the device will be reset.
On Android 8.0 Oreo and above
The "Settings" menu in Android 8.0 has undergone significant changes. Now the function "Reset to factory settings" is located under "System" → "Reset".
On Meizu
In Flyme OS, the path to the function differs from the stock Android: go to "Settings" → "About phone" → "Memory" → "Reset settings".
Check the "Delete data" item and click "Recover".
On Xiaomi
MIUI function Factory reset the developers hid it in the "Advanced Settings" - see the video instruction:
On smartphones Xiaomi the USB drive is also cleared, so take care of creating a backup in advance if you want to save photos, audio and other files.
Method 3. Factory reset on Android
This method is even simpler than the previous ones. In the dialer, dial one of the following. Perhaps none of them will work, it all depends on the manufacturer:
- *2767*3855#
- *#*#7780#*#*
- *#*#7378423#*#*
Also try entering these codes in the "Emergency Call".
4. We carry out Hard Reset from Fastboot mode
Clear internal memory Android devices You can use the Fastboot utility for PC when the device is booted in the mode of the same name (if available on the smartphone). About installing and running the program, as well as ADB and USB drivers, described in. On devices such as Nexus, Pixel, Huawei, HTC, Sony, Motorola, the latest LG, you must first unlock the bootloader:
- On Nexus - fastboot oem unlock command
- On Nexus 5X, 6P and Pixel - enable the "OEM unlock" option in the "For developer" settings, use the fastboot flashing unlock command
- For the rest, you must additionally obtain an individual code on the manufacturer's website
(!) Unlocking Bootloader is done via Fastboot and immediately makes Wipe. In the future, to reset the phone, just follow the steps from the instructions.
Move the device to fastboot mode... There are 2 ways:
First.Turn off your smartphone. Then hold down the "ON" + volume down buttons until Fastboot mode... This keyboard shortcut may differ depending on the manufacturer.
Second. Carefully study how to work with ADB and Fastboot, the link to the article is above. Connect your phone to your computer by activating USB debugging (see). Then enter the ADB command via command line (or PowerShell in Windows 10) running as administrator and press "Enter":
To Windows PowerShell executed this command, add at the beginning:
It will turn out like this:
The device is loaded in firmware mode. To erase data, just run one of the commands (don't forget to add. \\ When using PowerShell):
To reboot the device use:
5. How to delete data from your phone using the Find My Device service
Google has developed a special service Find My Device , with which you can not only track the phone, but also reset its settings. To do this, the device must be connected to the Internet.
2. Google will find devices linked to this account... Click Erase Data.
4. Confirm your selection by clicking "Clear".
As a result, the internal memory on the smartphone or tablet will be cleared.
6. If TWRP Recovery is installed
Unlike the standard recovery mode, custom recovery allows you to reset specific partitions, and not all settings at once.
To do this, open "Wipe" in the main menu.
If you just want to do a Factory Reset, drag the slider to the right.
If you want to format specific partitions, select "Advanced Wipe".
Mark the sections you want to clear and swipe right.
Click “Reboot system” to restart Android.
That's all. In fact, there shouldn't be any difficulties with factory reset on Android, the whole process will take no more than 5 minutes.
(4,80 out of 5, rated: 25 )
Chinese smartphones are very popular in our country. This is facilitated by the low cost of the devices, as well as decent performance.
However, none Android smartphone not immune from mistakes and various problems. If you decide to reset to factory settings (hard reset) on chinese smartphone, but you do not understand Chinese characters - we will tell you what to do and where to click. Thanks to the screenshots, you can make a hard reset on a Chinese smartphone in a matter of seconds.
In this tutorial, we'll cover the following:
- How to make a hard reset on chinese Samsung Galaxy.
- How to make a hard reset on a Chinese HTC Desire.
- How to make a hard reset on a Chinese Lenovo.
- How to make a hard reset on a Chinese Android smartphone.
1. How to make a hard reset on a Chinese Samsung Galaxy
First, make sure you check out microSD card memory and SIM card... It is also recommended to charge mobile device at least 70%.
That's all! Factory reset on a Chinese Samsung Galaxy isn't that hard, right?
2. How to make a hard reset on a Chinese HTC Desire
To perform a factory reset on HTC Desire China, you will also need to enter recovery mode.
3. How to make a hard reset on a Chinese Lenovo
Lenovo smartphones have the unique ability to change the language in recovery mode. After you select the required language, you can make a hard reset and return the smartphone to factory settings.
If you were unable to select the language for the recovery mode, then we have translated the Chinese characters from the recovery mode into English.
You just have to wait until the end of the hard reset process on the Chinese Lenovo.
4. How to make a hard reset on a Chinese Android smartphone
You can use these methods for everyone chinese Android smartphones.
Take a close look at the screenshots with Chinese symbols. If one of them matches the one on your smartphone, you can safely use it to reset to factory settings.
