How to improve the mobile signal. How to improve the mobile signal

Decided to spend a few days in nature among the mountains?

Be prepared for a sharp deterioration in quality mobile communication. And it's not that there are not enough base stations, the signal from which the mobile device finds. Although this factor is also very important. After all mobile phone and the station is constantly in contact with each other. The cell phone is always looking for a station with a more powerful signal, sending it the SIM card number and the IMEI of the device. Then the network computer learns the authenticity of the subscriber, doing this by sending a random number to the mobile gadget, which the sim card must process by a certain algorithm and sends the result to the base station in the nearest access. In turn, the base station sends data to the controlling computer. They check the code from the phone and the one that was calculated by the computer. If the data matches, the device can be connected to the network.

Both the phone and the base station constantly maintain contact. The device is connected from one station to another, provided that it has a stronger signal. And even if your device is in standby mode, this process still occurs. The main thing is that the mobile device is not located more than 35 km from the station. It is this figure that is the greatest possible to find far from base station.

But even if you are in close proximity to the base station, also play a role of terrain features, living on the ground floor in an apartment with massive walls, the presence of deciduous trees next to the windows, etc.

And if earlier owners of devices with an external antenna did not know the sadness and could easily improve the quality of the communication signal, now, in the era of expensive smartphones with built-in antennas, everything is much more complicated. After all, firstly, the built-in antenna for phone it is glued to the body by the manufacturer, and secondly, there are at least 3-4 of them and it is difficult to improve something without damaging the native parts.

Therefore, if you are thinking about improving the quality of communication - use the diagnostic connector to insert a built-in pins antenna into it. If there is no connector in the honeycomb, you can try to stick a passive antenna made of foil on the lid from the inside, where the native antenna for phone.

In addition, solve the problem weak signal mobile communication can also be using an amplifier that increases signal power. This passive phone for phone in the form of a sticker is very easy to install. It only needs to be pasted on the back panel or placed under the battery of the mobile gadget. Due to the fact that the passive phone for phone is in the same plane with the internal antenna, it will improve the reception pattern of the communication signal. You can also use conservative ways to improve communication and apply repeaters, repeaters, or install external phone for phone. It can both be purchased in an online store, and manufactured by yourself.

As you can see, there are solutions for improving the quality of mobile communications. You only need to choose your own and remember that the worse your phone receives the mobile signal, the faster the battery runs out.

But how to be? What can be done to improve the reception of your mobile device?

1. Repair of the premises.
If you are going to do it anyway, you should think about the signal attenuation coefficient depending on the material. The attenuation of the signal can be of the order of 20-40 units. The more metal, the more it is. Glass tinting also contributes - 3-5 units (this is also true for a car, communication in a tinted car is worse than in an un-tinted one). In general, with a competent approach to repair, there is a chance to reduce signal loss to a minimum.

The price of the question: for the sake of phone repair it is not necessary to do. You can say that for 500 or more dollars you make your life cool.

2. Remote antenna.
Each mobile device has its own external antenna, recommended by the manufacturer (often also released). If as a result of repair by phone it became much worse to speak, it is possible to recommend to get such antenna and to deduce it for glass. Their dimensions are not large, and the length of the cable allows you to put a mobile phone at a distance of more than a meter / two from the antenna itself (however, for accurate data, it is better to contact the seller). Also, it can be done as prevention, and see if there is any change for the better.

The price of the issue is not high. In any case, similar antennas are cheaper than the mobile device itself. Power supply as such is not available.

3. Broadband repeater.
If to explain the principle of the operation of such a device, it boils down to the following: "I accepted-intensified-passed on". The cheapest and most suitable for home use of all types of repeaters are broadband repeaters. They can amplify all frequencies at once, thereby improving the performance of not just one operator. In addition, if you previously did not have a connection, say, in the toilet, then after turning on such a device you can say with a high degree of certainty that it will work. When installing it, special sanitary standards should be taken into account, which very strictly regulate the installation of such devices.

It should be remembered that using this device without agreement with the operator cellular communication it is undesirable. The fact is that unauthorized inclusion of such a repeater can instead damage the operator's company, create various problems in this place (more in detail). This method is given as an introduction to the fact that it exists. The author assumes no responsibility for the possible problems, which may occur when using this board.

Price issue: about 500 dollars and a little electricity to power the device.

All these methods lead to an improvement in the reception of the mobile device in the house. For those who are not facing such a task, it will be useful to expand their horizons ...]

Many of us use the Internet provided by mobile operators. Thus, it is ensured a constant presence on the Web, which is so lacking wiFi networks. And since 2G networks are absolutely outdated, 4G, on the contrary, did not reach many and too expensive for others, the most popular mobile Internet For a long time there will still be a connection of the third generation - 3G. But very often, and because of congestion of transmission lines, obstacles and other troubles, it turns out to be unattainable, and the phone switches to a 2G connection. Well, even if the signal is unavailable, there is several reliable ways resume it, and it's about these ways that we'll talk now.

The first, and, perhaps, the most effective solution - acquire an additional antenna to receive the 3G signal. Such an antenna can act as an additional modem, ground for a mobile operator, and a more powerful integrated antenna of the device itself. That is why, those who are interested in 3G connection, it is necessary to think about buying a device with a good signal reception. Unfortunately, the purchase of an additional antenna is not an option for many, and you do not want to lose your favorite tablet or phone. Well, and for them there was a worthwhile decision. And it's covered in the settings of the device itself.

In fact, what is served us standard settings about networks - not at all exhaustive information about them. Installing special applications on your device on any operating system, you can learn a lot more information about cellular networks. In particular, one cellular operator usually paves several lines for its connection, so that it would be more convenient to distribute users over them. Usually such distribution occurs automatically, and in the settings the whole network is generally displayed as a whole. But, using a special program, you can manually select the connection line, taking for yourself a free, rather than an overloaded.

Of course, such a decision is not one of its kind. You can select many settings, thus optimizing the network for you. Having tried all the settings, the person optimizes the signal for themselves, achieving the ideal connection.

Thus, there are two main solutions to the communication problem - hardware and software. Each of them deserves attention, and each of them can be tried. After their complex application, the maximum possible signal can be achieved.

Disconnect the modem from the Internet