The tablet is an invention much more entertaining than, for example, that can only provide its owner with convenience. However, for the correct operation of the Internet, its mandatory configuration is required.
Setting up the mobile Internet on the tablet
Setting up the Internet in such a device actually means setting up the access point. So, first, the user goes to the "Settings" menu and selects " Wireless network". Next, he selects the option "Mobile network" and the item "APN APN".
The next step is to create a new access point. To do this, press the "Function" button → "New access point". It should be noted that the installation of specific parameters will depend on the provider selected by the user. It will be required to specify them - namely, to find out how to properly write down the name and address of the connection, the user name, the password, etc.
For example, "Beeline" offers the following parameters: "APN" - "internet.beeline.ru", "User name" and "Password" - "beeline". The setting for MTS users is very similar: "APN" - "internet.mts.ru", "User name" and "Password" - "mts".
Depending on what kind of tablet the user chooses, he should approach the choice of the provider very carefully. So, if he buys a Wonder Media tablet WM8650, he will need to ensure a high-quality connection.
Another way how you can configure the mobile Internet for the tablet, concerns the use of the function of Wi-Fi. At first glance, it may seem that such a configuration is a very difficult task. However, in fact, everything is much simpler, and the user can fully configure the Internet themselves.
Set up Wi-Fi mobile Internet on your tablet
The very first setting of Wi-Fi usually causes the user no less difficulties than installing it. However, more often than not, it is simply necessary, because Wi-Fi today is available in almost every decent cafe or restaurant.
Obviously, such a configuration depends primarily on the operating system device. To configure Wi-Fi on iOS, go to "Settings", select "Wi-Fi" and see if there is an access point in the reach zone. So, when you click on the access point, you need to enter a password and click "Join".
If you can not connect even with the correct password, the problem may be in the settings of the router itself.
If the tablet is running an Android platform, the user selects "Settings" → "Wireless networks" → "Wi-Fi". Going to " Wi-Fi settings", He selects the access point he needs and enters the password.
Video on the topic:
Other Related News:
Viewed: 23 times
__________ _____________ __________ ______ ____ ______ ______________ __________ ________ ______ ________ _____ ________ _______ _____ _________ ____ ______ _____ ______ ___ __________ ____ _______ ______ ______ ______ ________ ______ ____ ________ ____ ________ _______ ______
How to set up the Internet on Lenovo devices.
Smartphones and tablets from the Lenovo manufacturer, although not the most powerful and multifunctional devices, but they are very suitable for those who actively use the Internet, works with mail, uses social networks. All these functions require Internet access. Connect to the network as with using wi-fi, and with the help of 3G connection. This material will tell you how to correctly set up Internet connection settings on Lenovo devices.
Smartphones and tablets Lenovo work on the basis of the Android operating system. Therefore, the configuration algorithm will not be fundamentally different from the standard one.
How to connect the Internet through wi-fi?
1) In the settings menu, open Wi-Fi.
2) Set the setting wi-Fi connections in the "on" position.
3) Now find the list of access points to which you have access.
4) Click on the required field and enter it in the "Password" field.
5) You can also activate an access point that is not password protected, that is, it is free.
6) To determine if a connection is connected, pay attention to the taskbar on the special icon. It should glow in blue.
Now you can access the Internet through your browser or using the application.
How to connect 3G Internet?
In order to gain access to the Internet through the 3G network, you first need to get a SIM-card with a tariff that provides an Internet service. Usually, when the SIM card is inserted, the settings are automatically set. If this does not happen, first check if you have the tools in your account and the "data transfer" option is enabled (you can find it in the "mobile network settings" tab). Only then you can go to the manual settings.
1) We go in the settings in the item "data transfer", then in the "mobile network settings" and finally the "access point".
2) If there is an access point in the list, then simply activate it
3) If there is nothing in the list, we will create it anew. Use the "Options" button to select "New access point".
4) Then you need to fill in the fields "Name", "APN", "User name" and "Password". The data you need to enter can be viewed on your operator's website. Some graphs may not be completed. .
5) Close the menu and check if access to the network has been received. This can be understood by the icon on the taskbar (the antenna should glow and beside it stand any of the symbols H, E, 3G).
6) If the connection does not work, restart the device.
In the event that you were unable to connect the Internet, then it's possible that you entered incorrect data or you are out of network access, or your device is malfunctioning.
The tablet is usually purchased in order to be constantly in touch with the Internet. Connecting to the Internet via 3G today is one of the leading technologies, until the 4G network is widely spread. This connection allows you to get enough speed for work and works, unlike Wi-Fi, almost everywhere where there is coverage from mobile operators.
Configuring the 3G Module
How to configure 3G on the tablet, if such a module is already included in the Tablet PC? To do this, insert the microSIM card of one of the operators cellular communication in the tablet.
In this 3G adapter on the tablet should be compatible with domestic operators. After switching on the tablet, the connection should immediately start working. You may need to set up a connection by entering the APN username, your username and password in the settings\u003e mobile network settings\u003e account »(in different models the names may differ). Data for setting up different operators can be found on the Internet.
Example for setting up a connection to the iPad:
1) Enter the settings and click "Cellular Data"
2) Click on the "APN settings"
3) Enter the required data in the APN item. In this case, you can leave the name and password fields empty
After that settings are completed.
Connecting the 3G modem
How to configure 3G on a tablet without a 3G module? To do this, you need to purchase a USB modem to communicate with the 3G network. You just need to choose the model of the modem compatible with your tablet. It is also necessary that the tablet supports USB-modems, and this depends on the firmware and not all devices yet have this support. And through the hyperterminal (the program is HyperTerminal, there is on the Internet) it is necessary to remove the support of the CD-image from the modem and put it into the "only modem" mode. HyperTerminal installs on a stationary computer (in Windows XP it can already be preinstalled and located in the "Standard" section) and connect the modem for configuration. First, through the software installed from the modem, in the settings remove the PIN code check. Then, through HyperTerminal, transfer to the "only modem" mode.
Then on the tablet enter the menu Settings\u003e Wireless networks\u003e Mobile network and check the setting of the checkbox for "Data transfer". Insert the modem and wait for the definition of its tablet and the appearance of the network icon (up to 30 seconds). To add a new connection point, go to "APN Access Point" and "Menu". When creating a new connection point, you must enter your operator data. If the modem was bought tied to a specific operator, then some data will already be entered. After returning to the "APN APN" window, the configured access point should be selected and after a few seconds the "3G" icon will appear. After that, the setting is considered complete.
Setting example Android tablet when connecting a 3G modem:
1) Go to Settings\u003e Wireless & networks and select "3G", then go to "Mobile network"
2) Note "Data transfer" and connect the modem to the tablet. Then click "APN APN".
3) Press "Menu" and "New access point". Enter the operator data.
5) We go to the "APN Access Point" window and wait for your access point to become active.
If the APN is not stored, check that the PIN code is disabled on the SIM card or the tablet needs to be reset. If the modem is not working properly, check the compatibility of the modem and tablet. Do not forget to set the modem to "only modem" mode before setting up. It is desirable to insert the modem into the same socket, otherwise on some models problems arise when working with different sockets.
3G settings menu
If the menu has the item "3G settings" (there are some models of tablets), then enter this menu, connect the modem and select "Add 3G network". Here you need to enter the operator's data and click Connect, after that "3G" should appear at the top. A connection has taken place and everything should work.
If there are no descriptive menu items in the tablet, you may need to install Quick Settings downloaded from the market.
Do not forget that there should be a good 3G coverage and the signal is not weak, otherwise the connection will be cut off.
For a modern person, access to the Internet is necessary everywhere. Naturally, today in many places there is a Wi-Fi, at home a standard connection via fiber is installed. But with access can be interruptions or go to the network you need in a place where there are no connections available. For example, your ISP has a breakdown, it does not work and wait for a few days, or even more, to correct the situation. In this case, you can use a sim card megaphone. Of course, connection 3g is not that fast, but for standard use the stated speed is quite enough.
In this article, we'll look at how to connect access to the card, and most importantly, how to configure your tablet to use the Internet.
Which service to connect to the sim?
The main thing is to clearly define your needs before ordering any options. The megaphone company offers a large line of tariff plans, where the number of megabytes varies from 500 to 30 000, and the monthly fee ranges from 200 to 2500 thousand rubles per month. Therefore, if the subscriber plans to use the Internet to the fullest, he must choose the maximum tariffs, for example, options L and XXL. For users with less needs, you can choose package M, this tariff allows you to comfortably surf the Internet, communicate in social networks without restrictions and so on. And for people who need to go online only a few times a month, for example, failures at the home provider, it is best to connect the S and XS packages.
When the subscriber chose the option, then activate it on his own sim, he can through personal Area or by calling the company's support service megaphone.
How to configure access on the tablet to your sim card?
First, you need to determine the capabilities of your device. There are tablets that do not support 3g technology, so access from them, unfortunately, is not possible. Other devices can work with modems. But today almost any similar device has a built-in 3g technology module. Therefore, all you need to do is insert the SIM card into the device. In fact, to configure access is very simple, especially since almost all licensed devices on the market are already clogged with the settings of all mobile operators Russia. So the subscriber only needs to insert a card into the tablet, select the operator of the megaphone and press "connect".
And what if there is no such data in the device, and receiving text messages does not work, and the connection is not established? You just need to set up your tablet manually. FROM mobile phones everything is much simpler, just call the operator and order automatic settings for traditional access, then restart the cellular and everything. The sms tablets do not come (except that it's a tablet phone), so you have to set up the Internet and prescribe all the data yourself.
If the device supports the reception of text messages, to activate the access, you need to send SMS to number 5049 with the number 1. After receiving, you need to save the settings to reboot the device and connect the Internet.
If the tablets have an external input to activate access to the Internet through a 3g modem, then the setting is similar, as on the sim card.
So, go to the device settings, select the menu " mobile networks", Click on create a new access point, and enter the following data:
- the name of the access point can be named as convenient, for example MegaFon Internet;
- in the mmc field, we enter the country code for access - this is 250;
- field with login and password must be left blank;
- in the graph the network code is assigned the number 2;
- in the field the access point is written by the Internet;
- all other fields can not be filled, and if any values are already registered in them, they should not be changed either;
- press the save button;
- then you must turn off the device and after a few minutes turn it on.
This is all that needs to be done to access the worldwide network. But there are times when after entering the settings, access still does not work. There may be several reasons, namely:
- when entering data, errors were made, it is necessary to check everything again, fix it, save it, and then restart the device;
- the card does not have the means to exit or the traffic has ended, and access does not work if the number is in the negative balance, even if there are megabytes;
- there may be some reasons for the device itself, some tablets can only be stitched under one operator, in which case it is necessary to re-query the device and then to re-configure;
- other technical reasons;
- in other cases, access works.
The same problems listed above can occur when access is established through a modem. In any case, when there are any difficulties, you can always call the operator of the company and get help in the settings.
