If you are running Windows XP, Vista or 7 and your computer is equipped with a Realtek audio chip, then you must also have Realtek firmware. In order to activate it, go to the Start menu and type "Realtek" in the search box. When it appears in the search results for Realtek HD Audio Manager, click its name to open it. If it is not listed, then most likely you do not have an audio driver installed or an outdated version. In this article, we will explain how to install the driver, as well as correctly configure the sound settings.
Installing Realtek Manager
This procedure is necessary if you do not have the Realtek audio driver installed or if you have an outdated version.Download the correct driver from Realtek or your PC manufacturer.
Unpack the archive and run the "setup.exe" file to run the setup program.
Note: if a pop-up window "Windows cannot verify the publisher of this driver" appears, click the "Install ..." button to proceed with the installation.
After the installation is complete, you need to restart the system for the changes to take effect.
If the Realtek® software is correctly installed, you will see the Realtek® HD Audio Manager icon in the system tray. Double click this icon to display the Realtek® HD Audio Manager.
Realtek Audio Utility User Guide
Realtek® audio codec provides 8-channel audio support, Jack-Sensing, S / PDIF OUT support, and patented UAJ® Realtek® (Universal Audio Jack) technology for all audio ports to eliminate cable connection errors.Realtek® HD Audio Manager for Windows 8 / Windows 7 / Windows Vista
This version of Realtek HD Audio Manager supports Intel and other motherboards that have Realtek audio processor installed.
Note: the configuration options tabs are for reference only and may not match what you see on the screen. AT windows environment® 8 ™ / 7 ™ / Vista ™, Realtek® HD Audio Manager automatically detects devices connected to analog / digital ports and displays the corresponding configuration option tabs. In addition, the manager interface may differ slightly depending on the model installed sound cardand also the driver version. For instance:
Speakers Tab
The first thing you'll see is a device volume slider. On the right pane, you will see the settings for connecting audio output devices.
Digital output
To configure digital output parameters:
Click on "Additional device settings". Here you can enable or disable the separation of the front and rear inputs (front / rear microphone, front / rear line input).
Then you will have access to 4 sub-tabs: "Speaker Configuration", "Sound Effects", "Room Correction", and "Standard Format".
To set speaker parameters:
Microphone configuration
To configure the microphone go to the Mic in tab. At the top of the main window, you will see the microphone gain and volume settings. Adjust the slider to a comfortable format.
Click the Set Default Device button to set the port as the default audio input device.
In this section, you will have access to 2 sub-tabs: "Microphone effect" and "standard format":
- Click the Microphone Effect button to adjust the settings for noise cancellation, echo cancellation, and conference mode when recording audio.
- Click the "Default Format" button to select the default audio output format.
Click the information icon in the upper right corner of the window (sometimes in the lower one) of the Realtek® HD Audio Manager to display information about the sound driver version, DirectX, sound controller version and audio codec.
The well-known company Realtek has long managed to occupy its huge niche in the computer equipment market, specializing in the production of drivers for computer sound cards. They allow you to adjust the sound and make the sound surround. The most famous of these is the Realtek HD dispatcher.
Realtek HD Audio Driver are standard drivers for HD Audio Codec audio cards and some other Realtek cards. The dispatcher is a package that brings together all audio drivers and is suitable for Windows 7 and the relatively new Windows 8.
The Realtek HD program will come in handy for people who cannot imagine themselves without listening to music. Additionally, recording professionals can use it just as well. This program is able to further expand the boundaries of sound equipment, and it can be like a professional acoustic systemand a conventional subwoofer with speakers.
Equalizer settings are easily adjusted at will - in addition to the user mode, the dispatcher offers several types of sound to choose from: "Rock", "Pop", "Club" and others. And these modes have much more potential than the standard ones. In addition, in just a couple of clicks, you can choose the environment you want (bathroom, colosseum, fireplace).
Before you start using the Realtek HD program, you should definitely update the drivers for your audio devices by visiting the company's official website on the Internet (http://www.realtek.com.tw/downloads/). This procedure is necessary because the dispatcher is sensitive to drivers that have already been installed.
As for the evaluation of the Realtek HD dispatcher, it has many positive aspects:
- It is capable of supporting absolutely all the latest audio formats;
- Has a deep bandwidth;
- Allows you to connect and provides support for audio devices that use Plug and Play technology;
- Accurately and professionally recognizes speech, and also carries out its input;
- Provides software support for 3D sound based on Sensaura algorithms.
However, besides the pluses, the dispatcher has one minus:
- The thoughtfulness of the program control panel leaves much to be desired.
What if there is no Realtek HD Manager?
If you do not have Realtek HD manager on your computer, you can download it on the Internet for free, but more on that later. First, let's check if this program missing on your computer. Where can I find realtek hd dispatcher? Everything is very simple.
We go to the following address: "Start - Control Panel - Hardware and Sound".
We look, if it is not here, then you need to download and install the dispatcher from the official website.
Where can I download?
You can download the Realtek HD dispatcher program on the official website by clicking on the link: www.realtek.com.tw.
We agree to the terms by checking the box next to I accept to the above. And press the button "Next".
We get to the download page of the program, which can be downloaded from any of the six servers. Downloading Realtek HD.
Run the file you downloaded earlier. The process of installing the program went.
Where necessary, press the "Next" button.
At the end of the Realtek HD installation, the wizard will ask you to restart your computer. We press the button "Finish".
After the computer has restarted, let's see if we have Realtek HD. To do this, go to the address: "Start - Control Panel - Hardware and Sound", at the bottom there should be "Realtek HD Manager".
To open or run the Realtek HD manager, you need to go to the above address and double-click on the corresponding inscription. The dispatcher starts.
Appearance the dispatcher may differ (the photo above is the dispatcher on my laptop, and at the beginning of the article - on the computer), but in general the program menu is the same.
How to setup?
Setting up Realtek HD Manager is fairly straightforward. Let's go over the main menu items.
When you start the program, at the top we have two main sections - "Speakers" and "Microphone" (1). In the subsection "Main volume" (2), you can adjust the speaker volume, and add or decrease the volume in the left or right speaker.
In the sound effects tab, you can customize the environment by choosing from the list that suits your conditions, for example, a living room, a living room, a concert hall, a hangar, etc.
Set up an equalizer or select an already preset option, for example, pop, live, club, rock.
If something does not work out by clicking on the "Reset" button, all settings can be returned to standard.
In the "Standard format" tab, you can select the sound quality (frequency and bit depth).
In the "Microphone" section you can adjust the sound of the microphone. You can set the microphone sound, enable microphone gain, noise and echo cancellation, select the sound quality format.
Even in the manager, you can find out which version of the sound driver is installed on the computer, the version of DirecrX, which audio controller is used and the audio codec. To do this, just click on the "i" icon in the upper right corner.
The well-known company Realtek has long managed to occupy its huge niche in the computer equipment market, specializing in the production of drivers for computer sound cards. They allow you to adjust the sound and make the sound surround. The most famous of these is the Realtek HD dispatcher.
Realtek HD Audio Driver are standard drivers for HD Audio Codec audio cards and some other Realtek cards. The dispatcher is a package that integrates all audio drivers and in doing so comes to windows system 7 and the relatively new windows 8 OS.
The Realtek HD program will come in handy for people who cannot imagine themselves without listening to music. Additionally, recording professionals can use it just as well. This program is able to further expand the boundaries of sound equipment, and it can be either a professional speaker system or a regular subwoofer with speakers.
Equalizer settings are easily adjusted at will - in addition to the user mode, the dispatcher offers several types of sound to choose from: "Rock", "Pop", "Club" and others. And these modes have much more potential than the standard ones. In addition, in just a couple of clicks, you can choose the environment you want (bathroom, colosseum, fireplace).
Before you start using the Realtek HD program, you should definitely update the drivers for your audio devices by visiting the company's official website on the Internet (http://www.realtek.com.tw/downloads/). This procedure is necessary because the dispatcher is sensitive to drivers that have already been installed.
As for the evaluation of the Realtek HD dispatcher, it has many positive aspects:
- It is capable of supporting absolutely all the latest audio formats;
- Has a deep bandwidth;
- Allows you to connect and provides support for audio devices that use Plug and Play technology;
- Accurately and professionally recognizes speech, and also carries out its input;
- Provides software support for 3D sound based on Sensaura algorithms.
However, besides the pluses, the dispatcher has one minus:
- The thoughtfulness of the program control panel leaves much to be desired.
What if there is no Realtek HD Manager?
If you do not have Realtek HD manager on your computer, you can download it on the Internet for free, but more on that later. First, let's check if this program is really missing on your computer. Where can I find realtek hd dispatcher? Everything is very simple.
We go to the following address: "Start - Control Panel - Hardware and Sound".
We look, if it is not here, then you need to download and install the dispatcher from the official website.
Where can I download?
You can download the Realtek HD dispatcher program on the official website by clicking on the link: www.realtek.com.tw.
We agree to the terms by checking the box next to I accept to the above. And press the button "Next".
We get to the download page of the program, which can be downloaded from any of the six servers. Downloading Realtek HD.
How do I install Realtek HD?
Run the file you downloaded earlier. The process of installing the program went.
Where necessary, press the "Next" button.
At the end of the Realtek HD installation, the wizard will ask you to restart your computer. We press the button "Finish".
After the computer has restarted, let's see if we have Realtek HD. To do this, go to the address: "Start - Control Panel - Hardware and Sound", at the bottom there should be "Realtek HD Manager".
How to open (run) Realtek HD Manager?
To open or run the Realtek HD manager, you need to go to the above address and double-click on the corresponding inscription. The dispatcher starts.
The appearance of the dispatcher may differ (the photo above is the dispatcher on my laptop, and at the beginning of the article - on the computer), but in general the program menu is the same.
How to setup?
Setting up Realtek HD Manager is fairly straightforward. Let's go over the main menu items.
When you start the program, at the top we have two main sections - "Speakers" and "Microphone" (1). In the subsection "Main volume" (2), you can adjust the speaker volume, and add or decrease the volume in the left or right speaker.
In the sound effects tab, you can customize the environment by choosing from the list that suits your conditions, for example, a living room, a living room, a concert hall, a hangar, etc.
Set up an equalizer or select an already preset option, for example, pop, live, club, rock.
If something does not work out by clicking on the "Reset" button, all settings can be returned to standard.
In the "Standard format" tab, you can select the sound quality (frequency and bit depth).
In the "Microphone" section you can adjust the sound of the microphone. You can set the microphone sound, enable microphone gain, noise and echo cancellation, select the sound quality format.
Even in the manager, you can find out which version of the sound driver is installed on the computer, the version of DirecrX, which audio controller is used and the audio codec. To do this, just click on the "i" icon in the upper right corner.
toprat.ru
Realtek HD
It will not be difficult to download Realtek High Definition Audio Driver Audio Driver to your computer for installation or reinstallation. The free software Realtek HD has all the necessary functionality for correct and fast work audio-video players when playing music, video clips, movie films, serials, online TV, computer games, as well as programs for working with microphones, synthesizers, musical instruments. Positive ratings, reviews and comments on social networks, forums and other Internet resources, as well as tips on how to download Realtek HD sound drivers for Windows 10, 8.1, 7, Vista, XP on the site http://programmywindows.com are welcome ... Link: http://programmywindows.com/ru/drivers/realtekhd
Realtek HD at a glance
Realtek audio chips are installed in many computers, laptops, netbooks. Realtek High Definition Audio Drivers work with PCI audio cards, peripheral audio devices, and built-in audio processors. Successfully free download Realtek High Definition Audio Driver for windows 7, 8, 8.1, 10, as well as Vista, or XP SP 3 (32-bit and 64-bit) and install it on a PC everyone can, without any effort and without spending a lot of time ... These drivers will be useful to all users who have just installed or decided to reinstall Windows. If there are difficulties with the sound, or it does not play at all, then the Realtek High Definition Audio Driver update will come in handy.
Realtek HD interface and functionality
A clear interface even for a newbie allows you to quickly figure out the settings and get down to business. The fact that Realtek driver management is correctly Russified allows you not to waste time on translating and studying the interface, menus, windows, settings and capabilities.
First, you need to download, install or update the drivers for the sound card, and when the corresponding sound driver is installed, after the restart, start working with multimedia data, whatever they may be. The functionality of the Realtek High Definition Audio Driver allows you to watch video clips, movies or online TV, listen to music, play computer toys, use a microphone to record speech, singing and voice communication. The advantages of Realtek HD Audio Driver for windows include:
User-friendly interface and convenient settings- work with all current audio formats, - automatic configuration of Plug and Play devices, - support for DirectSound 3 D, A 3D and I3D L2, Soundman and SoundEffect, - wide bandwidth, - support for stereo recordings of 24 bit / 192 kHz and multichannel 5.1 and 7.1 Dolby Digital, - 10-band equalizer for perfect sound tuning, - emulation of audio environment in computer games, - compatibility with various electronic musical instruments,
Error-free speech recognition using the appropriate software.
As a result of regular updates Realtek Audio Driver HD quality is constantly improving and its capabilities are improving. We recommend without leaving the site http://programmywindows.com/ now, Realtek High Definition Audio Driver free download to enjoy good sound, in movies, TV shows, TV programs, video clips, CD, DVD, FLAC, MP3 music, playing games, using musical instruments and microphones, for example, to record an author's song and music or sing in karaoke.
How to smartly download Realtek
It is not enough just to download Realtek HD sound drivers for windows 10, 8.1, 8, 7, Vista, XP SP 3 (x86 and x64) for free on a computer or laptop. To run the Realtek HD audio driver, you need the correct hardware, which means your computer must use a compatible chip. To clarify what kind of sound card or microcircuit is installed in the computer, you can visually inspect the computer boards, or, without opening the case, in the Hardware section of the Control Panel operating system Windows, or using specialized software, for example, DriverPack Solution... The following markings are suitable: ALC260 - ALC275, ALC660 - ALC670, ALC882 - ALC889 and the like. Markings ALC101, ALC201 - ALC203 (A), ALC250, ALC650 - ALC658, ALC850, VIA686, VIA8233, VIА8233A indicate that you will need to download Realtek AC97 for windows 7, 8, 8.1, 10, Vista, as well as XP SP 3 ( 32-bit and 64-bit), also from Realtek.
Select the driver according to OS from the list below. Software to work with a sound card, it is installed in the same way as an ordinary program. To work properly, you need to restart your computer. The package contains real-tech Soundman, Sound Effect and Media Player.
Download driver Realtek High Definition Audio Russian version
programmywindows.com
Realtek HD Manager: Where to Get and How to Adjust Sound?
Almost all modern motherboards are equipped with integrated sound cards, most of which are developed by the Taiwanese corporation Realtek Semiconductor. Due to the popularity of the product, it is inevitable that all sorts of operational issues will arise, often related to setting up audio playback. The Realtek HD dispatcher will become the "hero" of our story.
The "creativity" of your PC
The level of effective productivity of the built-in sound card depends primarily on the modification of the hardware codec. At the same time, the configuration of the computer and the potential of the functionality implemented in it allow the integrated chip to use all the power of its "power". Modern motherboards have 7.1 musical capabilities (multi-channel surround sound). However, the transformation principle analog signal to digital and vice versa remains unchanged and everything works according to the same scheme: hardware codec - south bridge - processor. Of course, the final quality of the audio signal depends on the coherence of actions and the nominal power of each individual element in the "sound generation" chain. At the same time, the Realtek HD dispatcher is a kind of DJ's console, through which the user can influence the favorable sound of this or that multimedia material. However, let's go in order.
Cracking, noise and other interference
The unpleasant sound of computer speakers may be due to a number of reasons:
Stereo speakers and audio device components are of poor quality, which is often confirmed by the low cost of the product. It is possible that the cord or the connected end switch is damaged. Electrical appliances located close to the speakers can be causal sources of unpleasant background. Wheezing and crackling from speakers may be caused by an increased volume level.
Alternatively: with wrong connection the speakers are emitting background noise or a quiet, fuzzy sound.
Needless to say, the Realtek HD dispatcher is unlikely to be useful if the problem is purely technical. Of course, software "troubles" sometimes happen. It is worth noting that often the two causal bases of poor sound at the first stage of diagnosis remain erroneous. After a series of tedious experimentation, the user may discover that the problem was with the sound driver. Therefore, the most universal way out of a difficult situation is to reinstall the software. So let's get to the main topic of our review.
Installing and Configuring Realtek HD Manager: Step by Step Guide
You are probably aware of the fact that software installation requires adherence to standard windows-use procedures. In other words, for the correct implementation of the software into the operating environment, it is necessary to close all active applications, and if you take into account the fact that you will be installing drivers, then the reboot process you simply cannot be avoided. By the way, when installing from the official POST server, you will have to go through the mode twice.
Step number 1: find, download and register
First of all, you need to install the driver itself. Of course, if your sound works, then the system has the necessary software solution. However, standard windows drivers are somewhat limited in their "sphere of influence", and meanwhile, full access the package of drivers "Realtek High Definition Audio Driver" (it is recommended to install latest version). After installation, an additional speaker icon in dark colors will appear in the system tray.
Step # 2: configure drivers
Make sure your speakers or headphones are plugged into the (green) audio out jack. Then:
Go to the control panel. Now go to the "Sound" tab. Disconnect all devices not part of installed package (be guided by the name).
Perform the same actions by going through the "Recording" tab.
Step # 3: Launch Realtek HD Manager
windows 7 and 8 versions of the OS from Microsoft are the most promising today, so all actions are based on the example of these systems.
Double-click the right mouse button on the dark speaker icon (system tray). In the opened utility interface, you need to set the speaker configuration that meets your requirements. Let's stick with an example: desktop speakers. So, at the top left, select: Stereo. If there is a check mark next to the “Virtual Surround Sound” item, uncheck it. In the upper left corner of the window, click on the "gear" icon. Check the box next to “Split all inputs”.
The volume level and sound balance can be adjusted using the sliders located in the lower block of the interface. 
Realtek HD Manager always monitors active connections, and when the configuration changes, it warns the user with an appropriate message box. You can configure this option by clicking on the "wrench" icon.
Step # 4: playback effects
In this menu, which is activated by clicking on the "Sound Effects" tab, there are two basic blocks: the environment and the equalizer. The two main interconnected settings can be superimposed on each other, thereby creating a unique sound output signal. The templates provided by the Music Styles can be edited. In order to do this, you need to click on the "mixer" icon and make your preferred changes in the 10-band equalizer; to save the project, click on the "flop" icon.
Step # 5: room correction
The same Realtek HD dispatcher will competently help you to designate angles, acceptable distance, and the power of perception of audio accompaniment with filigree precision. How to set up 5.1 sound? The question will exhaust itself, because everything is schematically clear, and to activate the editing process, you just need to check the box "Enable correction function ..." By the way, by default there is a foot measurement of the distance, you can go to an acceptable footage by clicking the corresponding button on the right side of the window.
Step # 6: choosing acceptable quality
The necessary parameters for the playback of audio streams can be specified by using the presets: CD or DVD format. Using the separate check-boxes located above each of the presented standards, select the parameters that best suit you. In case you wish to return to standard settings, click on the "closed padlock" icon. 
By the way, information about the software version can be viewed using the "i" button, which is located in the left corner under the already familiar "gear" icon. After all, updating is an important part of a software upgrade.
Finally
So, we have discussed what Realtek HD dispatcher is. Now you understand the essence of the setup process. However, within the framework of the article, only the standard functions of the program were considered. It is worth noting that the Taiwanese driver is indispensable when using various video and photo editors. For example, in Skype - the well-known, "still free video messenger" - it is unrealistically difficult to configure the microphone using standard windows drivers... If your system has "realtech" software, there are no problems, and the decoding quality will always remain at its best. If someone close to you or someone you know does not know how to set up the Realtek HD dispatcher, please be so kind as to provide support with knowledge of the matter.
fb.ru
Sound does not work on Realtek High Definition Audio - prerelease.ACTIVEPEOPLE.SU
Problem:
The audio driver is not installed, displays the following message: "Failed to install the Realtek HD Audio driver".
Description of the solution to the problem:
Universal driver Audio devices (Universal Audio Architecture, UAA) class High Definition Audio version 1.0a for windows Server 2003, windows XP and windows 2000
Http://support.microsoft.com/kb/888111
see also for x64 bit versions
Http://support.microsoft.com/Default.aspx?kbid\u003d901105
Download and install the update
kb888111.exe (see attachments at the bottom of the page)
Supplement (for XP SP3 x32):
In the "Device Manager", we also find and delete (if any) "RealTek audio device" (or something with a similar name).
Don't know how to open the "Device Manager"? Start → Run (WinKey + R): "% windir% \\ SYSTEM32 \\ devmgmt.msc"
- HKEY_LOCAL_MACHINE \\ SOFTWARE \\ Microsoft \\ Updates \\ windows XP \\ SP3 \\ KB888111
- HKEY_LOCAL_MACHINE \\ SOFTWARE \\ Microsoft \\ windows \\ CurrentVersion \\ Uninstall \\ KB888111WXPSP2
- HKEY_LOCAL_MACHINE \\ SOFTWARE \\ Microsoft \\ windows \\ NT \\ CurrentVersion \\ HotFix \\ KB888111WXPSP2
- HKEY_LOCAL_MACHINE \\ System \\ Current Control Set \\ Enum \\ HDAUDIO, it may be necessary to allow editing the Enum section before deleting this branch.
X: \\ Drivers \\ Audio \\ MSHDQFE \\ Win2K_XP \\ US,
The file with the update kb888111 is not on the disk? Download it from the following links (versions only for windows XP SP2): Description page Update kb888111xpsp2 (Russian version) (705.7 Kb) Update kb888111xpsp2 (English version) (703.2 Kb) Problems with installing the kb888111 update?
Description of possible problems. I put q888111, I put firewood. After rebooting, the device is found on a new one, offering to search for a driver. Auto search finds nothing. After installing kb888111xpsp2, the button for installing from specified place... In these cases, you need to try the following: Unpack the kb888111.exe file into a folder by clicking right click mouse on the file and select "Extract to" (7Zip or WinRAR archiver must be installed). Then, in Device Manager, manually update the driver of the unknown device from the newly created folder with the contents of the self-extracting update archive kb888111.exe. After the above steps, the unknown device will become normal installed and will be named something like this: "Microsoft UAA Bus Driver for High Definition Audio".
Disable "Microsoft UAA Bus Driver for High Definition Audio"
check the picture (at this moment you can hear from the speakers sound signal, indicating that the device is disconnected, that is, the sound will work) .After disconnecting, uninstall (Uninstall) "Microsoft UAA Bus Driver for High Definition Audio", check the picture
X: \\ Audio \\ Realtek \\ Setup.exe,
where X is the letter of the CD / DVD drive in the system.
Your path to the installation file may be different.
It will not be difficult to download Realtek High Definition Audio Driver Audio Driver to your computer for installation or reinstallation. The free software Realtek HD has all the necessary functionality for the correct and fast operation of audio-video players when playing music, video clips, movies, TV shows, online TV, computer games, as well as programs for working with microphones, synthesizers, musical instruments. Positive ratings, reviews and comments in social networks, forums and other Internet resources, as well as tips on how to download Realtek HD sound drivers for Windows 10, 8. Link: website / ru / drivers / realtekhd
Realtek HD at a glance
Realtek audio chips are installed in many computers, laptops, netbooks. Realtek High Definition Audio Drivers work with PCI audio cards, peripheral audio devices, and built-in audio processors. Successfully free download Realtek High Definition Audio Driver for Windows 7, 8, 8.1, 10, as well as Vista, or XP SP 3 (32-bit and 64-bit) and install it on a PC, anyone can, without any effort and without spending a lot of time ... These drivers will be useful to all users who have just installed or decided to reinstall Windows. If there are difficulties with the sound, or it does not play at all, then the Realtek High Definition Audio Driver update will come in handy.
Realtek HD interface and functionality
A clear interface even for a newbie allows you to quickly figure out the settings and get down to business. The fact that Realtek driver management is correctly Russified allows you not to waste time on translating and studying the interface, menus, windows, settings and capabilities.
First, you need to download, install or update the sound card drivers, and when the appropriate sound driver is installed, after rebooting, start working with multimedia data, whatever they may be. The functionality of the Realtek High Definition Audio Driver allows you to watch video clips, movies or online TV, listen to music, play computer toys, use a microphone to record speech, singing and voice communication. The advantages of Realtek HD Audio Driver for Windows include:
User-friendly interface and convenient settings,
- work with all current sound formats,
- automatic configuration of Plug and Play devices,
- support for DirectSound 3 D, A 3D and I3D L2, Soundman and SoundEffect,
- wide frequency bandwidth,
- support for stereo recordings 24 bit / 192 kHz and multi-channel 5.1 and 7.1 Dolby Digital,
- 10-band equalizer for perfect sound tuning,
- emulation of audio environment in computer games,
- compatibility with various electronic musical instruments,
- error-free speech recognition using the appropriate software.
As a result of regular updates of Realtek Audio Driver HD, the quality is constantly improving and the capabilities are being improved. We recommend, without leaving the site site now, Realtek High Definition Audio Driver free download to enjoy good sound in movies, TV series, TV programs, video clips, CD, DVD, FLAC, MP3 music, playing games, using musical instruments and microphones, for example to record original song and music or sing karaoke.
How to smartly download Realtek
It is not enough just to download Realtek HD sound drivers for Windows 10, 8.1, 8, 7, Vista, XP SP 3 (x86 and x64) for free on a computer or laptop. To run the Realtek HD audio driver, you need the correct hardware, which means your computer must use a compatible chip. To clarify what kind of sound card or microcircuit is installed in the computer, you can visually inspect the computer boards, or, without opening the case, in the Hardware section of the Control Panel of the operating room. windows systems, or using specialized software, for example, DriverPack Solution. The following markings are suitable: ALC260 - ALC275, ALC660 - ALC670, ALC882 - ALC889 and the like. Markings ALC101, ALC201 - ALC203 (A), ALC250, ALC650 - ALC658, ALC850, VIA686, VIA8233, VIА8233A indicate that you will need to download Realtek AC97 for Windows 7, 8, 8.1, 10, Vista, as well as XP SP 3 ( 32-bit and 64-bit), also from Realtek.
Select the driver according to OS from the list below. The software for working with a sound card is installed in the same way as an ordinary program. For full operation, you need to restart your computer. The package includes RealTech Soundman, Sound Effect and Media Player.
Full description parameters, as well as instructions on how to configure the built-in sound cards Realtek. Setting up playback, recording, 3D sound. Windows Vista / 7/8
2012-02-17T18: 19
2012-02-17T18: 19
Audiophile "s Software
Copyright 2017, Taras Kovrijenko
Full or partial copying of the text is allowed only with the written permission of the author.
Prologue
This time I will touch upon a topic that is relevant, so to speak, for beginner enthusiasts - that is, for those who have not yet got hold of a discrete sound card and want to get the most out of the integrated one.
1. Educational program
For a start - a short educational program. Who does not know, or does not fully understand what it is hardware audio codec, take a good look at the relevant Wikipedia pages:
Have you read it? Excellent! And now it would still be very nice if you read my two articles:
Well, now we can start.
2. What do we have
So, at my disposal is Windows 7 SP1 Ultimate x64 (the setting described in the article is suitable for all operating systems, starting from Vista), built into motherboard (ASUS P7H55-V) ALC887 codec (datasheet available), external amplifier and microphone connected to the rear connectors (green and pink jacks, respectively). Please note that we will configure the map for output stereo sound by analog interface.
3. Software installation
First of all, you need to install the drivers. Of course, most likely Windows has already found and installed drivers for sound device, however, to gain access to all the functionality, as well as for peace of mind, we will install the driver package directly from Realtek, the latest version of which you can download on the corresponding page of my site. By the way, the settings specified here were tested on the R2.67 driver version.
We download the drivers, perform a simple installation procedure (by running HD_Audio / Setup.exe), restart your computer.
After loading the OS, a brown speaker icon should appear in the system tray:
4. Driver configuration
First of all we go to Windows Control Panel-\u003e Hardware and Sound-\u003e Sound and, making sure that our headphones or speakers are connected to the green jack of the sound card, we disconnect all unnecessary devices, and make our connected device the default device:
We'll do the same with recording devices at the same time:
Now double click on the tray icon. If there is no icon, look for it in hidden icons, if it is not there too, go to Control Panel-\u003e Hardware and Sound-\u003e... One way or another, the dispatcher window should open:
Here we immediately set the speaker configuration (stereo), set our analog device as the default device (after which the corresponding button will go out), turn off, if, God forbid, surround sound is turned on.
The button in the form of a yellow folder can be used to disable the detection of front panel connectors:
Also note that the connected connectors are displayed in bright color - in our case, speakers are connected to the green output, and a microphone is connected to the pink input. Here is one very important detail: double-clicking on the connector icon, you will see a window with a choice of the type of connected device. This is important because if you choose "headphones", then the codec will use a special additional amplifier (otherwise the sound in the headphones will be too quiet), for those connected active speakers or external amplifiers should be chosen "Output to front speakers"... This window also turns on the automatic pop-up of this window when the device is connected to any of the card slots:
Using the "i" button, you can open a window with information about the driver version, DirectX, audio controller and codec version, in the same place the display of the icon in the system tray is turned on / off:
Now let's turn off the effects:
The "Room correction" settings for the stereo configuration are not available, which is generally strange - in the same console from THX (which is included, for example, in the Creative X-Fi driver package), you can adjust the distance and angle of direction to the speakers relative to your location, which it can be very useful when you are not sitting directly in front of the speakers, or they are not symmetrically located relative to you. Well, okay, let it be on the conscience of the developers.
The last tab duplicates the control panel settings (however, most of the settings from the Manager are also in the control panel):
Here you can set the parameters of the system mixer - with what sampling rate and depth windows bit will mix all the sounds played. Let's set it to 24 bit, 96 kHz. Why - I'll tell you further.
Since I am constantly being stormed by questions of how to set up a microphone (which, in my opinion, should cause a minimum of confusion), I will still focus on setting up recording devices. Their settings, by the way, as well as playback devices, are located on separate tabs at the top of the window. Let's start with a stereo mixer:
Everything is elementary here. This device records everything that you hear through the speakers, that is, the finished audio stream that Windows sends to the sound card. It is reduced to the indicated form (since the mixer operates with a sampling rate of 96 kHz, then we will put the same here).
But our main recording device is, of course, the microphone:
So, set the recording volume to maximum, and turn off the microphone gain (then, if necessary, you can turn it on). Also, very often people complain that they play the sound perceived by the microphone, so that this does not happen - turn off the playback. To your taste - noise filtering, echo cancellation... In the tab , again, the recording format is set:
Considering the characteristics of the sound recording path, the standard 16-bit / 44.1 kHz is enough here.
5. Setting up foobar2000
In principle, the work done is enough to ensure the highest (for this card) sound quality in any player. But for the real paranoid, I'll give you the foobar2000 settings. We will need, in fact, the player itself and several plugins for it - WASAPI output support and SoX Resampler... Well, or you can download my assembly, which already has everything.
So, in the player output settings (File-\u003e Preferences-\u003e Playback-\u003e Output) select WASAPI:<наше устройство>
, we set the bit depth 24 bit:
Output via WASAPI Exclusive bypasses all sound card effects (if enabled) and windows mixer (for which we indicated the sampling frequency).
Now let's move on to the DSP settings:
Here we add the SOund eXchange and Advanced Limiter resampler to the chain. In the resampler settings, set the frequency to 96 kHz. And now - why 96 kHz. I did a series of experiments and here's what I found out. In the "front speakers output" mode, if the volume control is set to more than 90%, when playing a test tone udial (sampling rate 44.1 kHz) Strong distortion is heard. Distortion disappears if you either turn down the volume, switch to headphone mode, or resample audio to 96 kHz.
It is difficult to judge the reasons for this phenomenon based on the available data, but conclusions can be drawn and double-safe: output all audio at a sampling rate of 96 kHz, and do not increase the volume to more than 90%.
And a couple of words about the need to configure foobar2000. In principle, it is possible to output sound to the “DS: Primary Sound Driver” device. In this case, resampling will be performed windows tools (the resampler is not the worst there), besides, all other sounds will not be turned off (as when playing via WASAPI Exclusive). In addition, choosing this device, Windows will output sound to the device that is set by default in the control panel, which is convenient (for example, when one of the devices is disconnected, the sound automatically switches to the other). So the choice is yours - convenience, or confidence in quality.
6. Resurrection of 3D sound and hardware mixing
And of course I haven't forgotten about the gamers. Since in Windows, starting from Vista, there is no access to hardware mixing of streams (all operations are performed by Windows, and then one single stream is output to the sound card), the developers came up with special program, analogue of Creative ALchemy, but for Realtek - 3D SoundBack. It connects to hardware resources through the OpenAL interface, emulating for the specified windows programs emulates a DirectSound device (like in Windows XP), and then simply converts DirectSound (or DirectSound 3D) commands to OpenAL commands, as a result - we get real EAX 2.0 in games, as well as the ability to convert multichannel audio to stereo with surround effects.
To run the program, open the folder ... / Program Files / Realtek / 3D Sound Back Beta0.1, in file properties 3DSoundBack.exe in the tab "Compatibility" install windows Vista SP2 compatibility mode:
Now run this file. To add an application - click Add Game, enter the name and address of the folder that contains the executable file of the program. For instance:
After adding, do not forget to highlight the added application and press the button Enable.
Now the specified application will by default use the emulated DirectSound device and will have access to the hardware resources of the sound card:
Epilogue
Well, another grandiose article is over. By the way, I just thought: but in a good way, this article should have been written one of the first ... However, at that time I still would not have enough knowledge to describe everything in detail like this, so it may be for the best.
If something is not clear, there are still some questions - ask, comment. Good luck!
Information from the sponsor
EuroTechnika: chain of stores household appliances... On the site http://euro-technika.com.ua/ you can familiarize yourself with the range of modern 8-core smartphones (using a convenient catalog) and place an order here (with delivery or self-pickup).
