In order to access calls, send SMS and mobile Internet services, you do not need to spend too much time and effort, since activating a Beeline SIM card is completely easy. Most often, after purchasing a starter package, a certain amount of money is already in your personal account. Even if this is not the case, replenishing a personal balance is also not a difficult procedure.
Step one
In order to rightfully be called a subscriber of the company, you need to activate a Beeline SIM card. If after the purchase the consultants did not do this to you, then all is not lost. First, unpack the starter package. The set will include: instructions, contract and, in fact, the card itself. After removing the SIM card from the plastic shell, do not forget to write down or put in a safe place the plastic card to which it was attached. But more on that later.
So, the first step in order for the Beeline SIM card to be activated is to start your phone or modem. For each of the above three devices, there are different activation methods. By the way, in case of untimely payment for the services of the operator, the suspension of the provision of services also threatens.
Activation methods
- How to activate a Beeline SIM card on your phone? After launch, it is likely that the card will ask for a four-digit code. Don't get lost, this is where that shell comes in handy. Check the 4 digits opposite the PIN code line and enter it on the screen of your mobile device. Often, the first replenishment of money to a personal account automatically activates the card. So for verification, you just need to make a call to any number.
If this method does not work - do not despair, there is another option. This is a USSD code request. After restarting the phone with the Beeline card, you need to call the command with a combination of numbers *101*1111# and press call. This step will definitely solve the question of how to activate the Beeline SIM card.
By the way, if you recently purchased a SIM card, then according to the new instructions, Beeline has even simplified this task. All you need is just to check the balance after switching on. That is, dial *102# and click the call button.
Attention! If, after you have followed the step-by-step instructions, the SIM card does not function, then you should contact the Beeline hotline at 0611 or 8-800-700-0611 with a question of activation. You can also drive to the office or to the official store of the company.
Wouldn't it be superfluous to get acquainted with the information if it is blocked by the operator?
- How to activate Beeline sim on a tablet? If you purposefully bought a SIM card for use on a tablet, then the activation algorithm will not differ much. Again, if the card was purchased recently, then first try the balance check method. If it doesn’t work, feel free to call the USSD command with the combination *101*1111#, ending with the call button.
Important! Before you start working with the tablet, you need to turn off data transfer and check the work only after activation.
You can consult with a specialist to help you choose the right tariff, or you can do it yourself by studying the details on the official website. There is a chance that the tablet will refuse to accept commands, which means that it is best to do all the operations related to the card on the phone. Then you can freely use the card on the desired device. If you have any problems or questions, just dial and a specialist will answer all your questions.
If you have access to Wi-Fi, then you can go to the "Personal Account" of the user. This will give you the opportunity to do all the necessary operations without withdrawing the card, which is a very significant plus.
- How to activate a Beeline SIM card on a modem? Beeline has a very favorable offer for you. The set includes starter kits consisting of a modem and a SIM card. All that is required of you is to insert a newly purchased SIM card into a special slot. Activation will happen automatically. Then you can connect the modem to the USB port of a laptop or computer and use the internet package. But it is likely that the card will still require activation. For this, the same method works with dialing *101*1111# and call buttons. Do not forget to select the desired option, this is required for the modem to function.
By the way, many users are concerned about the question: is it possible to do it yourself without contacting a service center?
Carefully! It is possible that, depending on your location (region, region, country), the algorithm (for Beeline SIM activation to occur) will be slightly different.
By the way, if you want to know where your child or relatives are, the operator has provided, and we also recommend that you learn more about the service - it is available to each subscriber, regardless of the tariff.
For active Internet users
It's no secret that in the 21st century, at least half of the population is dependent on the Internet. And every second one wants to have high-speed Internet not only when connected to the home network, but also outside the “comfort zone”. Now this is not a problem. Until a few years ago, 3G speed was the most successful. Everyone actively used it, thinking that this was the highest speed of the Internet and that there could be no more. Naturally, things have changed now. A new network has appeared - 4G and 4G +. They differ from the declared 3G speed by about two dozen times more. But already among themselves, the “+” category overtakes the standard 4 times by 5. If you are interested in the Internet at the same speed as your Wi-Fi, then how to activate a Beeline 4G SIM card will be described below.
- As a rule, not all devices support the new format. Therefore, first you need to make sure that your smartphone, tablet or modem does not need to be replaced. If its characteristics disappoint you, then it's time to upgrade the device.
- After checking all your gadgets, you should go to the official store of the company and replace the SIM card. Your number will remain the same, and the replacement is completely free.
- Then it remains the case for small - just connect the option you need. Given that the phone is configured to work with a 4G network, you have 2 suitable options. The first is the “ALL” tariff, but the second, in turn, is the “Highway” option.
By the way, the operator provided separately, because on this device GB are consumed even faster.
If suddenly you see that data transfer has stopped working at the declared speed, then the 4G network is not available there. At the moment, the coverage area of this network is growing exponentially. And by the way, a new generation network will allow you to have a conversation and, for example, watch the weather in your browser at the same time.
The first thing to do to start using Beeline services is to activate a new SIM card, after which the starting Beeline balance is replenished, authorization in your personal account, turning on the Internet, changing the package and choosing services. To register and go through the activation of a SIM card, you need to insert it into the phone and just turn it on, then everything happens automatically. Although sometimes consultants in the communication salon help to do this. Below we will talk about how to activate the Beeline SIM card correctly on the phone, how the card is activated on the tablet, what to do if it does not activate, what command or code is needed to connect.
Ways to activate a new SIM card
Most often, a card with 4g is helped to activate even in the communication salon where it is bought, the process takes no more than 10 minutes.
But you can do this for an unregistered SIM card yourself, using a simple instruction:
- Just insert the card into your phone and turn it on;
- Enter the code indicated on the package;
- Make a call or write a message, but this is done only with a positive account status;
- The next step is automatic activation.
You can also use another option to enable the start balance with the connection of basic services:
- Insert a SIM card into a mobile;
- Dial *101*1111# on your phone and call button;
- Next, you will receive a message or a call from the operator about the inclusion of the card.
If everything was done correctly, then this will tell you that you were able to include the package. The same must be done to unlock cards or modems with the “no network” icon. Most often this happens with a negative balance and a long non-replenishment of the account.
If you encounter difficulties or errors during activation, then you need to call 0611 or contact a mobile phone salon to replace the starter pack.
Phone activation
If you have not used Beeline services before, then you need to follow these instructions:
- Insert the SIM card into the desired slot on the switched off phone;
- Download it;
- Enter the standard pin code, which is indicated under the protective film on the starter pack. If you entered it incorrectly, then you need to enter the puk code or go to your personal account via the Internet on a computer;
- Next, check the account through the request *101*1111# or make a call;
- After that, you should receive a message about turning on or unblocking the number.
Note that it is better to immediately check the account, because the display of the account will tell you about the correctness of the procedure. The same goes for the modem and tablet.
sim card activation on tablet
The activation procedure on a tablet is almost the same, because it includes the following nuances:
| № | Characteristic |
|---|---|
| First step | Insert the SIM card into the tablet and turn it on. |
| Second step | Turn off the Internet on the tablet. |
| Third step | Enter the request *101*1111# or check the account by *102#. |
| Fourth step | Go to your personal account or call the operator to select a package and tariff plan. |
| Fifth step | If you cannot call from the tablet, then you need to do all the operations from the phone. |
| sixth step | If you have not turned off Wi-Fi, then you can do all the manipulations through your personal account. |
Modem activation
Note that SIM cards in modems are almost always authorized, and are immediately ready for use, you just need to insert it into your computer.
But if there is no network, it is worth pulling out the SIM card and plugging it into the phone, and then dial *101*1111# to check the balance.
Sometimes there are features in connecting or unlocking cards, which depend on the region and city of the country. Therefore, it is better to immediately clarify the instructions with the operator or consultant in the store.
Activation of a blocked SIM card
If you want to use the old card that was previously disabled again, you can use two options:
- Top up your account with a low balance, which has not been replenished for a long time and make a call. Although there are time limits here, up to three to six months;
- Fill out the application form and come with your passport to the Beeline communication salon. This is done if you voluntarily decide to disable the number. Then the SIM card is restored, but the number can be given to another one. Because if the card is not used for a long time, the numbers are sold to other customers.
In case you have problems or can't log in, you need to call the number 8-800-700-8000 or come to the office of the company.
Conclusion
Enabling the card on all devices is almost the same in terms of instructions, but there are features with technical assistance and the inclusion of some services, such as the Internet.
Most of the difficulties are resolved after a call to the operator or through a personal account on the Beeline website. Even the old package can be authorized with an independent decision to freeze the account, but no later than six months and with a possible loss of the number. One way or another, consultants or voice prompts in the support service will always help you.
It will be helpful to look at:
The question of how to activate a Beeline 4g SIM card is quite common, although it is not particularly difficult during the activation process. But, if it periodically occurs among many users, then let's analyze it in detail.
After purchasing a Beeline 4g SIM card, it must be removed from the package and inserted into the device. Pay attention to what size the card should be in your gadget. There are three types: standard, micro and nano. The modern sim card 4 gee Beeline has creases for any size, so you don’t have to come to the sales office to cut it off as it was before. With it, you can make calls, send SMS and surf the Internet on your smartphone.
Beeline 4g SIM card activation for phone
First turn off your phone, remove the back cover and insert a 4 g Beeline SIM card into a special slot. Now the gadget can be turned on and perform several actions. To activate a Beeline SIM card 4g you will need:
- Make a short USSD request *101*1111# and press the call key.
- Or check the balance through *102# and the handset key.
When buying a card, the funds must already be in the account. Activation of 4g sim Beeline is a free service, so the balance must remain in its original form. The procedure takes place mostly instantly and in the near future you should receive SMS with settings for mobile Internet and MMS messages. But sometimes this process can take some time and, unfortunately, the calling feature will not be available yet. For an example, check out the article "" .
Now there is an easy way:
- Insert a SIM card into the device;
- Go to the browser;
- The window will have your number and the "Activate" button;
How to activate 4g modem Beeline
As a standard, mobile operators provide SIM cards for modems already activated, so they do not need additional configuration. But if you understand that the card remains invisible to the device, then we recommend that you perform the same manipulations as in the first case. Namely, use the short request *101*111# or *102#. Don't forget to press the call key. Or call the hotline and the operator will help you resolve this issue. In this article, you can first read about .
How to activate a 4g SIM card Beeline on a tablet
In this case, the process of installation and preparation for use is absolutely similar. Turn off the device, insert the element necessary for communication into a special slot, turn on the tablet. Next, dial all the same short USSD commands to activate and use the device. If for some reason this is not possible on the tablet, then do the actions on the phone, and then move the finished SIM card to the tablet. We advise you to immediately choose the best tariff plan for your needs in order to reduce costs. You can choose it in your personal account or on the official website of the mobile operator. Note that switching to another tariff may be subject to a fee. Now you can make calls or surf the Internet from your laptop. find out
When buying a Beeline SIM card, the subscriber, unfortunately, cannot immediately start using the company's communication services and make calls, since the card needs to be activated. Usually, this is done immediately by a consultant in the SIM card purchase store, but if no one has done this in your case, then you have several ways to complete the activation: using the browser on your phone, using a USSD command, or by calling a special hotline number. To learn how to perform any of the options, read further this article.
How to activate a Beeline SIM card in a phone browser
- For this item, it is not at all necessary to have Internet traffic options on your tariff. Most importantly, make sure you're connected via mobile data and not third-party Wi-Fi. To do this, go to the settings of your device and check the box "Mobile data transfer".
After that, proceed with the instructions.
- Insert a SIM card from your phone and turn it on.
- Go to any mobile browser.
- In the search box, enter any site absolutely.
Instead of the site you are looking for, a window of the Beeline mobile operator will open in front of you, in the menu that appears, click on the “Start using” field.
With this algorithm, you activate your Beeline SIM card and the starting balance on it.
In order to become one of the clients of the Beeline mobile operator, you need to purchase a starter package and register it on the network. In other words, beeline cards just need to be activated, after which you can use the services. This article will provide a description of how to register a Beeline SIM card.
If the purchase of the card was made in a branded communication salon, then registration can be done directly in the communication salon with the help of specialists. All you need to ask the employee to help with the activation. The registration service is provided free of charge, and the process itself does not take much time.
If activation did not occur in the salon, then this process can be done independently, right at home or elsewhere. In order to activate, you should use the SIM card storage tray into which you need to insert the card itself. Next, you just need to turn on the phone and wait until it is fully loaded. After that, the system will prompt you to enter the pin code that is provided on the box from the starter pack. The pin code itself consists of 4 digits. By typing them, the SIM card will be unlocked. After that, you need to make a call in any direction or send a text message. The main thing is that when performing such actions, there are enough funds on the balance sheet. When money is credited to the account, the number will be registered automatically.
An equally convenient registration method is the use of a special code. After the SIM card is in the device and the password from the starter package is typed, you should dial the request * 101 * 1111 #. Thus, subscribers can register their card. By the way, after sending the request, the operator notifies that the SIM card is activated on the device.
Subscribers can make sure that the SIM card is registered if they use another combination, namely * 102 #. In case of any errors, as well as the inability to register a SIM card on the network, you should contact the customer support service. For this, it is recommended to use numbers 0611 or 88007000611.
All SIM cards can be activated by different methods and on different equipment. Therefore, this procedure is also feasible on a tablet device. Initially, you need to insert it into the tablet and turn it on. After downloading, turn off data transfer. Next, you need to use a combination similar to mobile phones. Thus, the SIM card will be activated through the tablet. After that, you will need to select the required tariff or service from the operator and use the connection.
If the device does not have the ability to enter data on the keyboard, then you will need to rearrange the SIM card to the phone and register it in it, and then rearrange it back to the tablet.
Registering a SIM card from a tablet device
Customers can also register a SIM card using a modem. As a rule, for this you just need to insert the card into the equipment and everything will be done automatically. If this does not happen, then you will need to install a SIM card in your phone and repeat the registration procedure.
