While setting up a laptop or computer for distributing the Internet over Wi-Fi on Windows 10, some users can not share the Internet. In this article, we will try to provide information on how to share a network Wi-Fi network, what difficulties can arise in this case and how to solve them.
The wireless transmission of information is very popular among network users. Such a process is carried out mainly with the wi-Fi help router. But sometimes it does not exist or it is simply impossible to use it for some reason. In such situations it is necessary to know how from simple Wi-Fi adapter create an access point. Having adjusted the distribution of the Internet in the access point mode, it is not always possible to use the Internet, even connecting to the created network. This is mainly due to standard settings, do not allow to use the connection on the connected devices.
The work of the virtual module of Wi-Fi in the tenth version of Windows is similar to the seven. Organization of the wireless network without a router should assume the availability of WiFi technology, which is equipped in the adapter. This module is installed not only in routers and modems, but also in phones, tablets, laptops. As a result, the device can act as an access point. The access point is organized using command line. After that, you can receive and distribute the Internet at the same time, but there is one problem - the network is turned on, but you can not receive and transmit traffic to the Internet. This is due to the fact that you want to allow this shared access. How to fix it? To do this, you need to know the connection with which the Internet is provided, by sharing it for the Wi-Fi module.
This article is a supplement to the instructions on. Therefore, if you did not do this, it is better to start by installing everything according to the instructions. And if you have already created an access point over Wi-Fi, but connecting to it leads to limited traffic transmission or even to its absence, it is due to some difficulties that can be quickly resolved. Let's try to deal with the problems that occur in the settings sharing for the Wi-Fi network module in Windos 10 and the ways to solve them.
When you open a public Internet connection you are not prompted for a connection
A similar problem happens quite often. Its essence lies in the fact that when you start the Internet access point, the window with adapters already has a " Connection by local Area Networks 12 "(The name can include any number) and now it remains to allow Internet connection for this particular network.
- To enter the connection properties: by clicking on the Internet connection icon (on the desktop at the bottom right) with the right button, select " Network Management Center ..“.
- And then open the " Change adapter settings". Here you need to click on the network icon (most often " Ethernet") With the right button, click on" Properties"And then open the" Access"And activate the string" Allow other users to use... .. ". But what if the lines " Connectivity home network " no? Only " Wireless network ", Because the menu does not drop out, in which there must be a connection necessary to us. In fact, it looks like this:
- There is an exit. To do this, you need to open the properties of the adapter with which the network is connected. Then from the line " Allow connected network users to use the Internet ..."Remove the label, and press" OK“.
- Then re-enter the properties of the adapter and return the checkmark to the location. After that, below the menu will open, which will be necessary for us " Local Area Connection 12"(May be different). Then activate it with the " OK“.
- Also, the way to disconnect and turn on the network adapter is triggered. To do this, click on the connection icon and select " Disable". Then restart.
The performed manipulations should lead to the appearance of Internet access over the provided network for other devices.
If, nevertheless, the home network selection line still does not appear in the drop-down menu, then you need to check that the Internet network is really running, in the "Adapter Parameters" there should be a network icon "Local Area Connection (in our case 12)" with the active network.
No access tab in connection properties in Windows 10
To share, you must set the parameter to Internet properties, but there is no necessary tab, Access“.
To fix the situation you need to do the following:
- First you need to check the presence of the " LAN connection* ". This can be done by opening the " Network and Internet", Then" Network connections". If there is an icon, then the network is running. Otherwise, you need to activate it using the above instructions.
- If only the " Ethernet", Then the tab" access "and the choice of connections to the networks will not be, because all connections are absent. A solution to this problem is to install the driver on the virtual adapter and start it. If the network connection is not one, you need to install the driver and start it again.
- There are cases when a checkmark is ticked for permission to the other users in front of the " Wireless network"In the properties of other connections, then you need to remove it and most likely the item" Access" at " Ethernet"Will appear.
- If you have the "Starter" version of the Windows 7 operating system, then you will not be able to share it.
- When configuring the provision of Internet from a 3G modem, it happens that the item " Access" absent. This is due to the model of the modem itself and its settings.
