Many have already stopped believing, but it happened - hackers still released a public utility for jailbreaking current versions of iOS. Our favorite Pangu Teams have distinguished themselves by presenting a tool for "hacking" 64-bit iPhone, iPad and iPod touch running iOS 9.2 - iOS 9.3.3. In this guide, we'll show you how to jailbreak with Pangu's new jailbreak tool.
First of all, we want to pay attention to the fact that the jailbreak utility for mobile devices running iOS 9.2 - iOS 9.3.3 does not work in the most stable way. According to user reviews, many people experience rather specific errors, due to which a jailbreak is installed on the device. However, on our test iPad Air, the jailbreak installed without any problems.
We also note that the utility is currently released only in Chinese, however, following the steps of our instructions exactly, you should not have any special problems with handling the program. And one more thing - the jailbreak is semi-untethered, that is, on each reboot it will be reset and for the tweaks to work, you will need to run the PP application, which will be installed on the device. You do not need to jailbreak using a computer every time.
Step 1. Make sure your device is on the list supported by Pangu:
- iPhone 5s, iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPhone SE;
- iPod touch 6G;
- iPad mini 2, iPad mini 3, iPad mini 4, iPad Air, iPad Air 2, iPad Pro.
Step 7: Wait for another download to complete. Important - the download takes a long time, be patient.
This message will appear if everything went well.
Step 8. On your mobile device, go to the " Settings» → « Main» → « Device management" and press " Trust profile_name". The app will be installed on your iPhone, iPad or iPod touch PP.
Step 9: Launch the PP app on your device and confirm your consent to receive notifications. Then click on the circle and lock your device.
Step 10. Wait for the download to complete and a message stating that Cydia is installed on your device. While the jailbreak is being installed no need to press anything- after it ends, the device will reboot automatically.
Ready! You have installed the long-awaited jailbreak on your mobile device running iOS 9.2 - iOS 9.3.3. Note that not all tweaks are adapted to new versions of iOS and it is possible that your favorite add-ons will not work temporarily. However, given the experience of past years, we can safely assume that the developers will not delay the finalization of their tweaks for a long time.
How to re-activate the jailbreak after rebooting the device
We have already noted that the jailbreak is semi-untethered, however, an extra reminder does not hurt. If your iPhone, iPad or iPod touch turns off or you restart it, then the jailbreak of the system flies - 99% of the jailbreak functions stop working, including tweaks. However, it is very easy to restore the jailbreak in the case of the new Pangu utility.
Step 1. Launch the PP app (the one with the Pangu Team logo).
Step 2. Click on the circle, just like you did when installing the jailbreak and lock the device.
Step 3. There will be a quick restart of the system and the jailbreak will work again.
In this simple way, you can restore the jailbreak on your mobile device as quickly as possible. The recovery process is so fast that it should not bring any particular inconvenience.
Please rate 5 stars at the bottom of the article if you like this topic. follow us
Installing jailbreak Phoenix is very easy. The application must be downloaded to the device using the Cydia Impactor program, then open it and start the process. Like the Yalu app, the Phoenix jailbreak is semi-tethered, which means that every time you reboot your device, you need to restart the Phoenix jailbreak.
In this article, I will guide you on how to jailbreak iOS 9.3.5 on 32-bit devices using Phoenix.
Before you begin, be sure to read the following important data:
- This jailbreak is only supported on 32-bit devices, which include:
- iPhone 5
- iPhone 5c
- iPhone 4s
- iPod touch 5
- iPad 2
- iPad 3
- iPad 4
- iPad mini 1
- 64-bit devices do not support Phoenix jailbreak.
- Jailbreak is semi-tethered. When you reboot your device, the jailbreak will be disabled and you will have to install it again through the application.
- Jailbreak may not install the first time. If you encounter errors during the installation, start it again until the jailbreak is installed.
How to JailbreakPhoenix foriOS9.3.5 on 32-bit devices
1: Download the Phoenix IPA file and the .
2: Connect your iPhone, iPad, or iPod touch to your computer, then open Cydia Impactor.
3: Drag the Phoenix IPA file into Cydia Impactor as shown in the screenshot.
4: You will be asked to enter your Apple ID and password. This information will only be shared with Apple to register the IPA file. Enter your Apple ID and password so that Cydia Impactor can start the app installation process.
5: When the application is installed, an icon with the name "Phoenix" will appear on the main screen. Before opening it, go to Settings > General > Profiles(may also be referred to as " Device management" or " Profiles and device management»).
6: Then profile with Apple ID and click " trust».
7: Now go back to the main screen and launch the Phoenix app.
8: To start the jailbreak installation, click the button Prepare for jailbreak.
After that, the jailbreak installation process will begin. Do not touch your device until the installation process is complete. When this happens, the device will reboot itself, and the Cydia icon will appear on the main screen. If an error occurs, start the installation again until it works. As stated on the site, the exploit may have errors, so you may need to make several attempts.
You are now jailbroken on your iOS 9.3.5 device and can install various tweaks by opening the Cydia app. When you open Cydia for the first time, the application will take a little time to complete the installation. Once the installation is complete, you can start using it, but remember that you can only download tweaks that are compatible with your device.
How does a semi-tethered jailbreak work?
Phoenix is a semi-tethered jailbreak. This means that when you reboot the device, it will fail. You won't be able to use installed tweaks and the Cydia app will crash on startup. To re-jailbreak, simply open the Phoenix app and run the install. Jailbreak will be installed on the device again.
When does the application expire?Phoenix and how to reinstall it?
If you install the Phoenix app with a free Apple ID, it will expire after 7 days. You will have to reinstall it via Cydia Impactor to extend it for another 7 days. This is done in the same steps as above. Note that the Phoenix app is only needed to install the jailbreak, so even when the time expires, the jailbreak will continue to work. But you will have to download the app if you want to re-jailbreak your device.
If you install Phoenix with a developer's Apple ID, the app will only expire after one year.
Installing a jailbreak on the iPad will allow you to hack the current operating system file system, for example for game applications. Many users ask the question: is it possible and how to remove the "jailbreak"?
Jailbreak for iPad - a special section containing a plan of measures for tethered and untethered jailbreak - "jailbreak" that allows you to jailbreak iPad with any version of iOS. The jailbreak process occurs when using the software applications "PanGu", "Redsn0w" or "evasi0n". There are special instructions in the subsections of the system that provide the procedure for installing hacked programs, modified firmware, and eliminating iTunes system errors. On an iPad without a jailbreak, you cannot run a new jailbroken version of iOS 5 and higher.
What types of jailbreak iPad 2, iPad 1, iPad 3, iPad Mini are there?
"Tethered jailbreak" or tied jailbreak on the iPad 2 allows you to access the files of the Apple iPad system until the tablet is rebooted or turned off. When a new power-on follows, for the iPad 5 jailbreak it may not boot at all or after downloading, the applications will not be able to fully work. Therefore, it is distinguished by the fact that it is tied to a PC and cannot function without it.
Semi-tethered jailbreak or semi-tethered jailbreak is similar to the previous one, except that it can allow you to reboot the tablet without connecting to a computer. In this case, you cannot use Cydia software applications and its tweaks, Mail or Safari. As a result, it is tied to a PC connection that will launch and download the necessary files to it.
Untethered jailbreak or untethered jailbreak is installed on the iPad once before the need to install a new software firmware. With it, you can open the path to the files of the operating system the next time you boot iOS 10 without any extra effort.
Types of jailbreak versions
The latest jailbreak v.1.2.0 update for iOS 9-9.0.2 solves the most common problems, but new ones appear. So, for example, those who had the joy of erasing the old version and updating the system to iOS 9 version on Apple's iPad 5 for the game encountered unstable devices after downloading it.
In another case, the developed iOS 9.3.4 jailbreak allows you to hack the iPad mini 5 software without using a computer. Although the developers are required to fill out the user's Apple ID before downloading.
It must be remembered that before working with jailbreak operating systems 9.3.3 or 9.2, you first need to back up all the files on your iPad 5 through the iCloud program or using the program iTunes to prevent deletion of data. At the same time, a jailbreak can be performed for software of any kind of iPads, including the iPad mini 5.
How to jailbreak iOS 9.3.3 without a computer for the game
To jailbreak iOS 9 or iOS 10 for the first time on an iPad, launch the Safari software by opening the iPad air 2 settings. Download the required link to the PP app to complete the jailbreak process . A menu will open where select the "Install" command, starting the download process on the desktop of the PP application. Watching the process, wait until the "download" process enters the "installation" process stage, then turn on the "Airplane" mode on your tablet. When the installation process is completed, you can turn off the "Airplane" mode on the device.
The next step is to open the "Settings" menu and select the "General" section, and then activate the "Device Management" subsection. Then the qualifier with the choice of proposed certificates and click the "Trust" command. After that, returning to the home page, turn on the installed PP and confirm by clicking "OK" sending notifications in the "push" format.
Look for a tick in the PP below to remove it. And then press the lock screen button, waiting for the message about the successful completion of the iPad jailbreak procedure. Now unlock your iPad and press PP to start installing Cydia, which ends with a system reboot.
Open the Cydia program installed on the home screen to prepare and launch it. In this case, the iOS jailbreak format is used, so after the next reboot of the device, you will again have to set the “jailbreak” mode, for which you will need the PP application again, without which you cannot complete the entire process. So iPad without jailbreak won't be able to install games, so don't uninstall PP unnecessarily.
Is it possible and how to remove the jailbreak
In order to remove a jailbreak, such as games, open "Cydia" on the main screen. Next, in BigBoss, find the Cydia Impactor utility, and then install and run it. At the bottom of the screen menu, activate the “delete all data and ..” key, which means deletion, including jailbreak.
Then, to permanently erase the data, press the "Delete all" key. Subsequently, the iPad screen will display the jailbreak removal process in the status bar. Wait ten minutes for this process to complete. The iPad will then restart on its own.
To jailbreak an iPad, you need to connect your iOS tablet to a PC that has the latest version of iTunes installed. If it is not there or the version is not the latest, download it from the official website to your computer. Next, at the top of the main menu, find the "Find iPad" option, after which the program will ask you to disable the "Find iPad" option in order to start the device recovery process. You will go to the "Settings" menu, where you will open the "iCloud" section, which will have the "Find iPad" function. Your iPad will be updated to factory settings. If the iPad data is backed up, then while booting, restore the iPad settings by clicking the "Restore from Backup" button. ” or you need to select the “Restore from a copy” command in iTunes.
Unattached jailbreak of any version of the operating system for iPhone and iPad, from iOS 9.2 to iOS 9.3.3, we decided to cover in detail the process of hacking an “apple” device so that everyone can jailbreak their smartphone or tablet.
Since the release of the jailbreak for iOS 9.3.2 and iOS 9.3.3 took place only today, no one guarantees the stable operation of the iPhone and iPad. As is often the case, hackers allow in their exploits, which ultimately affects the performance of the iOS operating system. Of course, over time, all bugs and errors are fixed, but if you do not have an urgent need for a jailbreak device, then it is better to wait a little with its installation.
How to jailbreak iOS 9.2, iOS 9.2.1, iOS 9.3, iOS 9.3.1, iOS 9.3.2 and iOS 9.3.3:
Step 1: To begin with, it is worth backing up the data on the iPhone and iPad, since in case of any problems, all the information can be easily restored and the jailbreak installation process can be started all over again.
Step 2: From the Pangu hacking team or you need to download the latest version of the jailbreak exploit for Windows, then unzip the downloaded files to your desktop and install.
Step 3: After launching the PP25 application on Windows, you should connect your iPhone, iPad or iPod Touch running iOS 9 to your computer, and then open the tab that appears with information about the device. Here you need to press the Blue button with the letter "P".
Step 4: On the "apple" device, go to "Settings" - "General" - "Profiles and device management", then select the item with Chinese characters from the list and click on the blue "Trust" button in the menu that opens.
Step 5: On the iOS 9 desktop, a blue icon will appear with a “P” button, which you need to click on. Immediately after that, a message in Chinese will appear. Click on the button on the right (OK).
Step 6: A large button will appear in the application, surrounded by a circle. Click on it, after which the jailbreak installation process will automatically begin.
Step 7: A message should appear on the screen of the "apple" device, according to which PP Pangu is installing the Cydia store, wait a few minutes until it completes. As you might guess, you need to wait for the end of this process.
Step 8: If everything is done correctly, then the iPhone, iPad or iPod Touch will reboot, and after turning it on, a message will appear indicating that the jailbreak was successfully installed on the device.
After completing these eight steps, the coveted Cydia icon will appear on the desktop of the iOS 9 operating system, which indicates the successful installation of the jailbreak on the iPhone, iPad or iPod Touch. This completes the procedure for hacking the "apple" gadget.
Join us at
And it is supported on all 32-bit devices with this version of iOS. The jailbreak does not work on 64-bit devices because it uses an exploit that is only present on 32-bit devices.
Installing the Phoenix jailbreak is pretty easy. The application must be downloaded to the device using the Cydia Impactor program, then open it and start the process. Like the Yalu app, the Phoenix jailbreak is semi-tethered, which means that every time you reboot your device, you will have to restart the Phoenix jailbreak.
In this tutorial, we will show you how to jailbreak iOS 9.3.5 on 32-bit devices using Phoenix.
Before you begin, be sure to read the following important data:
- This jailbreak is only supported on 32-bit devices, which include:
- iPhone 5
- iPhone 5c
- iPhone 4s
- iPod touch 5
- iPad 2
- iPad 3
- iPad 4
- iPad mini 1
- 64-bit devices do not support Phoenix jailbreak.
- The jailbreak is semi-tethered. When you reboot your device, the jailbreak will be disabled and you will have to install it again through the app.
- Jailbreak may not be installed the first time. If you encounter errors during the installation, start it again until the jailbreak is installed.
How to use jailbreakPhoenix foriOS9.3.5 on 32-bit devices
Step 1: Download the Phoenix IPA file and Cydia Impactor to your computer.
Step 2: Connect your iPhone, iPad, or iPod touch to your computer, then open Cydia Impactor.
Step 3: Drag the Phoenix IPA file into Cydia Impactor as shown in the screenshot.
Step 4: You will need to enter your Apple ID and password. This information will only be shared with Apple to register the IPA file. Enter your Apple ID and password so that Cydia Impactor can start the app installation process.
Step 5: When the application is installed, an icon with the name "Phoenix" will appear on the main screen. Before you open it, go to Settings > General > Profiles (may also be called "Device Management" or "Profiles and Device Management").
Step 6: Open your profile with your Apple ID and click the "trust" button.
Step 7: Now go back to the main screen and launch the Phoenix app.
Step 8: To start the jailbreak installation, click the button Prepare for jailbreak.
The jailbreak installation process will begin. Do not touch your device until the installation completes successfully. When this happens, the device will reboot and the Cydia icon will appear on the home screen. If an error occurs, start the installation again until it works. As stated on the site, the exploit may have errors, so you may need to make several attempts.
You are now jailbroken on your iOS 9.3.5 device and can install various tweaks by opening the Cydia app. When you open Cydia for the first time, the application will take a little time to complete the installation. Once the installation is complete, you can start using it, but remember that you can only download tweaks that are compatible with your device.
How does a semi-tethered jailbreak work?
Phoenix is a semi-tethered jailbreak. This means that when you reboot the device, it will fail. You won't be able to use installed tweaks and the Cydia app will crash on startup. To re-jailbreak, simply open the Phoenix app and run the install. Jailbreak will be installed on the device again.
When does the application expire?Phoenix and how to reinstall it?
If you install the Phoenix app with a free Apple ID, it will expire after 7 days. You will have to reinstall it via Cydia Impactor to extend it for another 7 days. This is done in the same steps as above. Note that the Phoenix app is only needed to install the jailbreak, so even when the time expires, the jailbreak will continue to work. But you will have to download the app if you want to re-jailbreak your device.
