Instead of a message about the successful completion of this operation, you were shown a window with an error, then below you will find the most common errors during activation Windows 8 and methods of solving the problems encountered.
If you get an error while activating Windows 8 0xc004f074, the reason for this most likely is that the "Software Licensing Service" is trying to contact the server in vain, and the product key entered during installation cannot be verified. In the description of this error, the system writes: "Key management server (KMS) is unavailable." To fix this error, you need to do the following:
1. Opening command line as administrator and enter the command
slmgr.vbs -ipk your_product_code
then press "Enter", then enter the command
then press "Enter" again. After the executed commands, the error should disappear, but if this did not happen, then in the same command line you need to enter the command
and press "Enter" to execute it. The activation wizard will start with which you can enter the serial number of your copy Windows 8 and then select the "Activate" option.
Next error is activation error Windows 8 0xc004c4aa. The occurrence of such an error indicates that you are trying to "legalize" Windows 8 You are trying using Media Center. Yes, up to a certain point this method really worked. The user had to enter a free serial number (which was distributed until February 31, 2013) after which not only the media player itself was activated, but the entire operating system. Unfortunately, at the moment Microsoft has closed the activation option Windows 8 Pro via WMC, and thus activate your copy Windows 8 will not work.
Another error that can occur is an error when activating windows 8 0x8007007b. This error occurs when the activation service does not like the key you entered. The activation wizard tries to contact the KMS server and present the key you entered, but attempts to verify this key fail. To fix the problem, you need to run the command line as administrator and enter the command:
slmgr -ipk xxxxx-xxxxx-xxxxx-xxxxx-xxxxx
where instead of characters xxxxx you specify your license number and press "Enter".
If you encounter an error while activating Windows 8 0xc004e003, this means that the system does not accept this product serial number due to the fact that it is already in use or it is not suitable for your edition Windows 8 ... Make sure you have the key for your edition Windows 8 and try to reactivate the platform. To do this, go to the "Windows Activation" section, select "Change Product Key" and then step by step follow the steps suggested by the activation wizard.
Another error is activation error Windows 8 0x8007232b may also be accompanied by the message "DNS name does not exist". In this case, the problem may indeed be related to the inability to resolve the required DNS name. If everything is all right with you, then try to activate manually by opening the command line as administrator and entering the command there:
slmgr / ipk xxxxx-xxxxx-xxxxx-xxxxx-xxxxx
where xxxxx is your license code product.
Sometimes you may encounter an error when activating Windows 8 0x80072f8f. This error indicates that the time zone, time and year are incorrectly set on your computer. So after correct setting these parameters, the problem should disappear.
If during the activation process you encounter an error during activation Windows 8 0xc004f061, then this means that you are trying to activate the newly installed system with a key intended only for updating from Windows 7 before Windows 8 ... There are two ways to solve this problem. You can, of course, install a previous version of Windows, and upgrade to Windows 8 using this serial number... But it can be done much easier and faster. Launch Registry Editor (Win + R, then regedit, then Enter). In the window that opens, go to the "Edit" menu, select the "Find" item and enter the name "MediaBootInstall" in the search window. When this parameter is found in the registry, its value must be changed from "1" to "0". After that, open a command prompt as administrator and enter the command.
As you know, in order to use operating windows systems in fully functional mode, it is not enough just to install them on your computer. It is also required to activate the product using a special key. However, in systems of the seventh, eighth and tenth versions, a failure sometimes appears, in the description of which the code is indicated. For what it is connected and how to fix the problem, see below.
Code when activating "Windows 10", 8, 7: reasons for the appearance
In addition to the activation error code itself, the notification contains short description Problems. In general terms, it can be interpreted as incorrect syntax, or, in other words, entering an incorrect key. This can be observed when the user tries to use a key for his version of the system intended for another modification, or simply incorrectly enters numbers and letters.
But the main problem is that the message contains only error code 0x8007007b and a description, and there is only one close button below active window... So it is not clear to some users, where to enter the key, if the system itself does not offer any possibilities for this? There is an exit. There are at least two simple solutions to carry out the activation process by entering the correct key.
How to fix the code? Method one
To be sure that such a situation is connected precisely with the absence of a license, first make sure that it really does not exist.
To do this, call the command line (cmd in the "Run" menu) and write in it the execution of the special script slmgr -dlv. If the license states that it is missing, proceed to troubleshoot the problem.
We call the "Run" console ( quick call - keys Win + R) and enter the command slui 3. In the window that appears, there is special string, in which you need to enter the desired 25-digit code. If you enter it correctly, the system will inform you that the activation was successful. If the user receives a notification about successful installation key, but activation does not occur, and the message containing the error code 0x8007007b appears again, go to the second procedure, which, in general, is not very different from the first.
Second methods
The second method to fix the activation problem is to use the above service, which was used when checking the license status.
In this case, you should again turn to the command line, where both the activation command and the key are written. It looks like this: slmgr.vbs -ipk 12345-12345-12345-12345-12345, where instead of the set of numbers shown in this example, you must enter the key value. After that, just press the enter button and the problem disappears.
Please note that in both the first and second cases, the command line should be launched exclusively with Administrator rights.
A few final words
What's most interesting is that a message containing the error code 0x8007007b appears on all systems, but only in version 8.1 there is a button in the warning window, after clicking on which a window appears where you need to enter the correct value. But in general, both presented methods windows activation problems should not be presented to any user of any skill level.
Have questions? Write a comment!
Hello! Today we will look at the most common errors that can occur during activation operating system Windows 10. You will also learn how to solve these problems. Go!
Windows 10 activation error codes
Error code: 0x803f7001, 0x800704cF.
An error means that the key that you enter when activating Windows 10 is either invalid or outdated. License given key not valid. Try again to carefully check that you entered the activation key correctly.
The Windows 10 activation key must be listed on the packaging of the Windows computer or media in e-mail Windows Proof of Purchase, or Certificate of Authenticity that appears on your computer, bottom or back.
To enter a valid Windows 10 activation key, open the Start menu in the lower left corner of your screen. In the window that opens, click on the tab - Options.
Further on the page "Update and Security", on the left in the sidebar, click on the tab - Activation. Click on the button - Change product key and enter a valid activation key.
Error Code: 0xC004C003, 0xC004C060, 0xC004C4A2, 0x803FA067L, 0xC004C001, 0xC004C004, 0xC004F004, 0xC004C007, 0xC004F005, 0xC004C00F, 0xC004C010, 0xC004C00E, 0xC004C4A4, 0xC004C4A5, 0xC004B001, 0xC004F010, 0xC004F050.
These errors can also occur due to entering an incorrect activation key. You need to use a different key or purchase a new one.
It is possible that the Windows 10 activation servers are busy. In this case, you just need to wait a little, Windows 10 will be activated automatically. If the problem persists, then contact customer support.
You upgraded to Windows 10 for free, but after reinstalling the system, Windows 10 did not activate. Windows 10 should only activate automatically if you haven't made any hardware changes. For example, replacing hard disk or motherboard.
Error code: 0xC004F034.
The error occurred due to the fact that you entered an invalid activation key or a key for another windows versions... You need to enter a key that matches the edition of your Windows 10 system installed on your computer.
If Windows is installed on a device that connects to the Key Management Server, then you need to contact your organization's support specialist to obtain additional information about Windows activation.
Error code: 0xC004F210.
The error can occur if you've previously upgraded to Windows 10, but your current edition of Windows is not up to date digital resolution... In this case, your computer is not eligible to upgrade to Windows 10.
Error code: 0xC004E016, 0xC004F210, 0xC004F00F.
You entered a key for a different version and edition of Windows 10. The Windows 10 Enterprise edition activation key cannot be used to activate Windows 10 Home and Basic editions.
Error code: 0xC004FC03, 0x8007267C.
The error can occur if there is no Internet connection or firewall settings prevent Windows from completing Internet activation. You need to make sure that the internet is connected and the firewall is not blocking Windows activation.
You can also activate Windows 10 over the phone. At the bottom of the screen, in the taskbar, open "Search Function"... In the search box, enter the command -. You will have this command, click on it.
Error code: 0xD0000272, 0xC0000272, 0xc004C012, 0xC004C013, 0xC004C014.
The Windows 10 activation server is temporarily unavailable. When the server reconnects, Windows 10 will be automatically activated.
Error code: 0xC004C008, 0xC004C770, 0x803FA071, 0xC004C020.
The error occurred due to the activation key being used on another computer. Either exceeded maximum number used keys on multiple computers. In this case, you need to buy a key for each of your computers.
A new key can be purchased through the Windows Store app.
Error code: 0x8007232B, 0xC004F074, 0xC004F038, 0x8007007B.
The error occurs because you enter the Windows 10 Enterprise edition key to activate Windows 10 Home or Windows 10 Pro.
You are trying to activate a work computer without being connected to a work network. If you are connected to a production network and the error still occurs, you may need to change network parameters... Contact a support specialist in your organization!
You can also enter the activation key yourself again. The beginning of the recording shows how to do it!
Error code: 0x80072F8F.
This error occurs when the date and time are not set correctly on your computer. Make sure your computer has the correct time and date! In the lower left corner of the screen, open the menu "Start"... In the window that opens, click on the tab - Options.
Also check your internet connection and try restarting your computer!
Error code: 0xC004E003.
The error can occur due to what you are installing on your computer third party programsthat can change system files... In this case, try doing
Error "0xC004F074" can occur only if the activation is carried out using not license keythat has been used many times. If you still encountered this error, this does not mean at all that your key is not working and do not rush to get upset. There are several ways to solve this problem, consider at windows example 10. In general, I don’t want to preface a lot, let's get down to business.
Fixing the error "0xc004F074" on the example of Windows 10:
1.
The first thing to pay attention to is to match the time on your PC and the remote server. If the time is different, then you need to go to Date and time options and make changes so that it is the same as on the remote server.
2. If after adjusting the date and time, the error persists, then you need to use the command line. To do this, press "Win + R", a window will open "Run",
here we enter the command "Cmd" and press Enter, a command prompt will open. In the command line, enter the following commands:
a) Introduce "SFC / SCANNOW", wait for the result.
b) Enter the following command "Slui 3"then "Slui 4"... Trying to reactivate Windows 10.
3.
If the second option did not help, we call the command line again and enter the commands:
a) Slmgr.vbs -ipk xxxx-xxxx, in place xxxx-xxxx enter your activation key.
b) Slmgr.vbs - ato... These two commands will force Windows to accept your license key.
4. This option is purely my recommendation for you, it will save you from unnecessary hassle and troubles. If you are using the OS for home purposes, then just use this activator, he also conducts activation using a simple installation of the key, only in contrast to legal activation, here the activator replaces the Microsoft server with its own.
This is a completely safe process and you do not need to disable antivirus protection while working with the activator. Also, after activation with this activator, the key never flies and your Windows 10 will be fully updated. You can watch a video instruction on how to work, for this go to the page with the activator.
Also add the site to your browser bookmarks Ctrl + D and fresh keys with activators will always be at your fingertips.
