Smartphone is a dear thing, requires careful handling. One of the most vulnerable places is a screen. Many in the course of operation repeatedly drop the phone, wear in the bag, where the keys and other sharp objects lie beyond him.
As a result, quickly even on a new smartphone appear chips, scratches, cracks, and then the screen can crash. But it is quite possible to extend the life of the device if you use modern technologies, such as purchased and install protective glass.
Outwardly, it looks like a film with similar tasks, the type of glass is transparent and flexible, but due to higher density is more reliable and more durable.
Protective screen for phone It costs somewhat more expensive than film, but it fully justifies its cost, as it reduces almost to zero, the probability of the screen is broken.
What is a protective glass for a smartphone - what functions performs
Before you know how to glue protective glass on smartphone screen, we will analyze it features.
Benefits should include:
- resistance to damage and scratches - can check it with keys or knife or scissors - traces will not remain,
- repayment of impacts - even when the phone is dropped down, it will not break down, only protective glass will damage, fragments of which will not be broken down in different directions,
- it holds reliably - more durable compared to the film, easily glued at home without special experience.
Disadvantages:
- the phone will become more voluminous and heavy,
- purchase and sticker glass will cost a decent amount
- requires accuracy during installation.
On average, the thickness of the protective glass is from 0.2 to 0.3 mm.
Glass has five layers:
- Oleophobous - ensures the convenience of slipping the fingers across the screen, while prints are easy to erase with a cloth, protects against moisture,
- Protective - responsible for the safety of the screen from scratches and cracks,
- Anti-glare - does not allow the screen to fill up,
- Deterrent - if the screen still managed to break, he will keep fragments,
- Silicone.
Video instruction - glue protective glass on smartphone
How to glue a protective glass on iPhone - Phased instructions
Those who want to know how to glue the protective glass on the iPhone 7-6-5, it is worth it in mind that the overall algorithm of action is about the same for all phones.
The contents in the glass box can be slightly different from different manufacturers, but, as a rule, includes glass itself, a rag from the microfiber / napkin, an alcohol napkin and a sticky film for dusting. If something has not turned out, you can use instead of napkins and rags, remedies.
It is important to prepare a workplace - it can be a table or another smooth horizontal surface. The lighting should be sufficient not to miss the divorce and dust during gluing.
Instruction - How to glue Protective Glass on iPhone 7-8
You can glue it yourself without much difficulties according to the following algorithm:
- Disinfecting your hands so that there are no dust and other contaminants on the phone and film.
- Apply the protective glass on the smartphone for fitting. If you are afraid to stick crooked, there are special stickers in some sets (you can replace with scotch). We glue stickers from one side fixing the correct position of the glass.
- We fold down the glass.
- We wipe the smartphone screen with a wet cloth from the set, then wipe dry with a second cloth from the set. We take the adhesive film from the set and applying to the screen remove the smallest dust.
- Remove the protective film from the substrate.
- Apply / omit the glass to the screen so that all cutouts exactly coincide.
- The napkin is smoothed from the center protective glass and make sure there are no air bubbles and dust.
- Check the sensitivity of the screen to the finger.
VIDEO
The whole process will take about 10 minutes. The developers thought all to the smallest detail, so there should be no difficulty with gluing.
Unique properties allow you to create maximum protection with maximum convenience for the owner of the popular iPhone 7 smartphone.
You can purchase protection via the Internet and in specialized accessories stores for Apple products, and stick yourself without resorting to the help of professionals.
Few people get the first time to glue the glass perfectly, since air bubbles remain under it. Dry cloth will remove them to remove them - put it on the screen and push the air outward.
If dust fell under the glass, flexing it from the right side and remove the dust of the scotch, then we reappear the glass to the screen.
Now, knowing how to properly glue the protective glass on the iPhone 7-6-5s, you can save and protect your phone yourself without resorting to expertly experts.
If you have become the best owner of the iPhone 7-8, take care of its protection against scratches and other damage from the body. Make it very simple - use Baseus Pet Soft 3D or Bronoskins protective glass.
Protective Glass Overview on iPhone 7 Case
Protective glass for iPhone 7 Baseus Pet Soft 3D 0.23 mm has a number of advantages compared to conventional glass.
Benefits:
1. Soft edges.
The edge of the glass is made of a special PET material, so the edge of the glass will not crack and crumble. It is not only convenient, but also safely.
2.3D rounding.
If ordinary glass closes the direct part of the display, the Baseus Pet Soft glass completely covers the smartphone screen, closes all curved extreme surfaces.
3. Studacity 9H.
With the minimum thickness of the protective glass, the strength remains very high, so it can withstand shocks, preventing chip and scratches.
4. The power is only 0.23 mm.
Glass is ultra-thin, but at the same time all its protective qualities are preserved. Your phone will be under strong and durable protection.
Video Description
How much is the protective glass for phones
Today, hundreds of companies around the world are engaged in the production of protective glass.
The most budget options, of course, are offered Chinese firms whose products can be easily ordered via Aliexpress.
However, the production of any manufacturer - tempered glass, differs only to its quenching.
The price may vary significantly depending on the quality indicators, as well as the firm of the manufacturer.
So, for iPhone 6, you can purchase anti-reflective glass DF iblickglass-03 with a transparent matte surface and 9H hardness. The cost of it begins from 1,500 rubles.
As for simpler options, for example, Chinese production, on average, the cost of them starts from 900 rubles. This is almost twice as high as films. Many are wondering - is it worth overpaying?
Maybe stay on the film?
The film copes with scratch protection, but when it is dropped, it can not always protect the screen from cracks. It is more difficult to glue, often air bubbles remain, inside the dirt is quickly clogged. Glass in this regard is more convenient, it will last longer and ensure more reliable screen protection. However, for these amenities really have to overpay.
If you are glued glass, you will not have to additionally pay the services of a specialist who will take this task for yourself, and this is a few hundred rubles. There are such masters in any service centers for the repair of phones, as well as in stores for the sale of smartphones.
Thus, the cost of buying and installing glass on the smartphone will be at least 1,500 rubles, but it is really profitable, because the replacement of the crashing screen will cost an average of 3000 rubles, especially if we are talking about Apple products.
Since the time of plastic phones, resistive films were tool to protect the screen. They defended the display from scratches, but in the event of a fall, the sensor may be damaged. In addition, the film worsens the overview, and the movement of the finger also slows down on the touchscreen. The development of technologies led to the appearance of a oleophobic coating, from which protect glass is made. How effective are they actually?
Tempered glass is a coating that has been chemical processing. It is several times superior to the film. Surface hardness is 2-3 times more than the film. Its thickness is 0.26 mm, 0.33 mm, even 0.5 mm. This layer is not noticeable to the eye it is difficult to feel your fingers, but it does not prevent the use of the device. Through the transparent protective glass on the phone is transmitted a clear image. The finger slides easily on the smooth surface.
Glass has a five-layer structure:
- silicone base fixing glass on display;
- deterrent layer that holds back the broken screen;
- anti-glare layer impede sweat with bright light;
- protective layer responsible for the lack of damage;
- oleophobic coating that protects the screen from fat spots, fingerprints and moisture.
The manufacturing process is to heat the surface to high temperature and etching in reagents. As a result, the structure of the glass changes, increases mechanical strength and hardness. Despite all these advantages, protective glass has one serious drawback. Sustainability growth reduces the ability to resist shocks to the end. The screen withstands the fall of the plafhmy on the asphalt, but can split when the angle is impaired. Even in the case of such a strike, Tatchkrin still remains not damaged.
Each new generation of flagships is equipped with oleophobic spraying. However, the protective glass on the phone gives protection against scratches and scuffs. And even for this it is worth using it.
How to pick up and glue a protective glass on the phone - Tips
Before sticking the protective glass to the phone, you should choose the right glass, based on the screen parameters. Consider them more detailed.
OGS Displays with 2,5D Touchscreen
OGS is a touch screen that is tightly glued with transparent glue to the module. 2,5d is a type of touchscreen without familiar edges, that is, with stained chamsters. Such screens used Apple to the iPhone. Since the sensor is smoothly moving into the frame, stick glass does not work. It will hang over the edges, forming an air layer, or leave the edges without protection.
The behavior of glass on such a device depends on its quality and impact characteristics. When falling from a high height, the low-quality glass is burst, not touched the touchscreen. But the high-quality glass will remain as a whole, but the sensor may suffer. Selecting close to the screen, glass has a higher strength than touchscreen. But high rigidity does not allow absorbing the blow.
OGS Displays without 2,5D
Such sensors do not have polished faces. Glass covers the edge of the sensor. In case of falling from a height or side impact, the likelihood of damage to the display is less. Therefore, the protective glass should be pasted on such screens.
On such displays, the sensor and the matrix are connected around the perimeter, and between the surface of the air layer of 0.1-1 mm. When hitting such a design faster faster. Therefore, a protective glass should be pasted on the screen. If we consider that such displays are installed on budget models, then the smooth surface will also strengthen the slip of the finger across the screen.
Before sticking the protective glass to the phone, you should prepare a napkin, alcohol, medical gloves, silicone suction cup (if any).
Usually they come complete with glass. Otherwise, all the details will have to be bought separately.
It follows to sticking in a well-lit room, since in case of falling dusting, it will not work out the screen. Therefore, you should study in advance how to glim the protective glass on the smartphone:
- 1. Degrease the screen. Owing gloves, mixing a napkin in alcohol, wipe the screen from divorces.
- 2. The screen should take your fingers for the edges. The sticky layer must remain untouched. Otherwise worsen the reliability of sticking. The perfect option is to grasp the glass suction cup.
- 3. From the bottom side, removing the protective film. The glass is kept at a distance of 5-10 cm from the screen so as not to stick dust.
- 4. Slowly bring the glass to the screen. As soon as it began to be captured, carrying out the napkin in the middle (from the speaker to the buttons).
- 5. As soon as the center sticks out - we blow the air, conducting a napkin from the midline - to the edges.
- 6. When the glass is fully gluable, you can remove the upper film.
From the first time correctly paste the protective glass on the smartphone will not work. In the case of dust entering the edge from the corner closest to the bubble of a bank card. The gap a couple of millimeters is enough to pull the dust with tweezers or blew it out.
How to stick a protective glass on iPhone
Properly glue the protective glass on the Apple smartphone can also be as well as any other phone. First, the hands should be disinfected so that dust remains on the film. Then the glass should be applied to the machine, try the boundaries. Then remove the glass and wipe the screen with a napkin and a damp cloth. We remove the protective film and lower the glass to the screen, so that all the cuts are exactly coincided. We smoothen the napkin surface from the center to the edges to remove bubbles and dust. The whole process takes 10 minutes.
However, not everyone gets the first time to stick the glass from the first time. Usually air bubbles remain. To get rid of them enough to make a dry rag to the place and push the air outward.
How to glue the original glass
Before sticking the protective glass to the phone, you need to remove the old one.
Due to the difference in weight, glass is harder than film. It is tightly connected to the touchscreen, but not at the expense of glue, but with the help of electrostatic properties. It is impossible to dismantle the glass with sharp metal objects. They can damage the screen, silicone suction cup can tear the loop.
If dismantling is carried out due to improper installation, it is easiest to remove the glass with a bookmark in the top of the glass. You can remove the old surface, streaming the edge of the bank card, and pulling the surface with gently with hands or suction cup. Broken glass should be taken from fragments, starting from the largest.
In the process of installing, keep a new glass easier by silicone suction cups. If there is no one at hand, you can use the usual tape. It is attached to the edges of the glass protective film.
Today, most of the protective glasses are produced with edged edges. Such 2.5D sensors are completely adjacent to the screen. But due to the smaller size, do not cover the entire visible area of \u200b\u200bthe display. In the process of installation it is easier to eliminate the shortcomings. Enough the edge of the glass hook a bank card.
Original glass are produced as close to the screen size. They close the entire display. But non-skled edges always remain, which are noticeable when the display is turned off.
Especially for Apple iPhone is made by Full Cover glasses with a painted frame around the display. The glass is glued to the screen, completely repeating the shape of the smartphone.
For popular android positions also produce glass Full Cover. It glues around the perimeter and rests on the edge. This affects the responsiveness of the display, dust quickly falls under it.
Service life and operation
The life of the protective glass depends on the nature of the use of the phone. If the device is constantly located with sharp objects. For example, in a bag next to the keys, the screen quickly scratches. This will not lead it in disrepair, but the aesthetic appearance will be disturbed.
Small particles and metal dust can not only score ports on the body, but also to get under the glass. Under the uncomfortable edges, dust and dirt accumulate. These particles can scratch the display itself.
In general, if you store a smartphone in a closed case, then the glass will last for several years, providing not only the safety of the gadget, but its aesthetic appearance.
Video
How to stick glass on iPhone?
Additional protective glass for the phone is a modern alternative to familiar films for screens. This accessory will protect your smartphone from all types of mechanical damage to the display (scratches, scratching, cracks from the decline of the device).
If you decide to purchase a protective glass for the iPhone, check out the basic tips on the choice of this accessory:
- the glass thickness determines the level of protection of the phone from drops and beats;
- select the type of glass - matte or glossy. The second option is cheaper. Glossy products protect the screen from shocks, but not from scratches;
- matte glass completely protects your iPhone from shocks, sweetes, drops and glare.
Installing the protective accessory on the phone screen does not require special skills. Consider in detail how to stick a protective glass on an iPhone for several simple steps.
Step 1. Display Cleaning
Give a workplace in order. Make sure that there is no dust on the surface, which may eventually stay under the film. Then open the packaging and lay out all the items on the clean flat surface.
Clean the smartphone screen using fabric and equipment for cleaning glass. Carefully wipe the display surface and wait for it to completely dry. This action will allow you to remove even invisible dust. Try no longer touch directly to the iphone screen itself, so as not to create new divorces and dust. Napkins for initial cleaning the phone are complete with a protective glass.
Step 2. Unpacking Protective Glass
At the next stage, unpack the accessory and prepare it for sticking to the phone. Take the screen and disconnect the protective layer, which after sticking will contact the phone display. After disconnecting the protective layer, try not to touch the protective glass, otherwise the fingerprints will remain on the product.
Step 3. Sticking
Turn the protective glass down the side that was released from the film. Position the accessory above the smartphone screen without touching it. Try everything to match the most exactly as possible and accurately to avoid uneven sticks.
Further action must be done very quickly. Gradually, apply the glass to the iPhone display in the direction from the top of the housing to the bottom. Release the film so that the side areas themselves glued to the phone. Thanks to good cleaning, the bubbles will not form.
Step 4. Surveillating Surface
Not always, users know how to stick the glass on the iPhone. As a result, the result may not be perfect. To remove small irregularities or inside the air, take a piece of microfiber (comes with glass) or clean fabric and gently wipe the phone, moving from the center of the display to the side, slightly pressed. Thus, it is possible to eliminate flaws.
On the outer side of the protective glass is also pasted the film. Remove it immediately after eliminating all flaws. Now turn on the device and check the sensor responsiveness. Normally, the additional screen should not affect the smartphone.
Eliminate errors
If there are too many dust and dirt during sticking under protect glass, it will be uncomfortable to use the smartphone. The sensor can react worse on touch, and the appearance of such a phone will not be the best. Many users wonder how to glue the glass on the iPhone again and is it possible to do this at all? Yes, you can.
If the first time it did not work out normally glue the accessory, carefully disconnect it from the display and deposit to the clean surface. Once again, wipe the iPhone screen again and make sure that there are no more dust and dirt on it. Only after cleaning the screen, turn the glass again. More accessory is not worth the accessory.
How to remove the glass from iPhone?
As a rule, users need to remove the protective glass only in one case - when it broke during a fall or impact. It is very important to properly remove the accessory so that the fragments do not damage the main display of the smartphone.
Take a plastic card and find it the edge of the protective glass. Then move the map under the glass to its complete removal. This method allows you to create a certain barrier Waiting for the display and a damaged protective accessory.
Banks company was established in 2008. Represents the trendy and creative brand of digital accessories. The product range is very large: protective films, protective covers, portable power supplies, chargers, holders for smartphones and gadgets, USB cables, adapters and many other related products.
"Think about us" - is the concept of a brand.Benks firmly believe that the original and high-quality products can change the life of each buyer.
Comfort and convenience from the manufacturer
The company controls the quality of the production of digital accessories daily. Benx uses imported raw materials for the manufacture of products, so every product is safe and certified, does not smell, unlike some competitors.
Benks® uses advanced production technology
Thus, the buyer gets the best product that has been thorough quality checks. One of the leading brands in the category of protective glasses and protective films for smartphones.
For long years, the company has been working on the production of protective coatings, so the product range is very large. According to Taobao statistics, Benks® is one of the leading brands in the category of protective accessories. The company entered JD Mail in 2010 and is a popular seller among protective glasses and films for gadgets for three years.
Protective coatings of the company passed MFI certification from Apple Corporation. Benks is the first organization that has received a national patent for the production of protective glass for auxiliary equipment.
Designer inspiration comes through the love of beautiful things in life. The combination of exclusive trends of fashion and originality, foreign exchange of experience, training of employees in leading designer schools leads to unique ideas and innovation in the design of the designs of manufactured accessories.
Protective glass on the "apple" gadgets is designed to protect the devices from damage. Usually the chemical composition of increased strength, a preventing display from chipping and scratches. Some users neglect such protection, and in vain. Protective glass for iPhone 6 and other gadgets can significantly extend the life of the mobile device.
In this article, we will look at how to remove the protective glass from iPhone 5 and devices of other versions. Also to pay attention to how to glue the protective glass on the iPhone. In addition, we will try to identify the advantages of this method of protection of the display before ordinary film.
How to change and how to glue the glass - read detailed instructions below.
If you compare 2 basic way to protect the iPhone display screen - glass and film - most criteria will be in favor of the first.
Pluses of glass coating is:
- Increased strength with a small thickness of just 0.25 mm.
- The presence of a oleophobic coating that prevents manifestation of fingerprints on the display.
- Sometimes - the presence of a nanofilament that gives the increased smoothness of the surface.
- Reliable fastening with silicone elements that do not give the coating to move and prevent the formation of irregularities and bubbles.
Flexible glass to protect the display of mobile gadgets may also have zoomalized edges. This means that the edges have a rounded shape, so the coating is almost imperceptible. In addition, if the apparatus hit anything, the coating does not occur. So if you are thinking, what is the best protective glass - stop your choice on the element with zevalced edges.
Make glass: Precautions
Before starting work, you need to take into account some rules. First, remember that the glass adjacent to the display quite strongly because it is very smooth. But the element is kept not due to glue, but with the help of electrostatic forces. Thus, two perfectly flat surfaces are tightly in contact, and the glass will not be able to remove, just hiding it with his finger. But to use a household item for this purpose, for example, a knife, too, because there is a risk of damaging the screen or body.
Silicone suction cup in this situation will not help either. If you glue this tool to the damaged coating, the emptiness is formed under it, and when pressing it slump.
And if the fastening is good, the suction cup is not going anywhere, but there will be a different problem. The fact is that the sensor is attached on the gadget case using either glue or adhesive tape. The strength of these substances in the rupture indicator is much lower than that of glass or touchscreen. Therefore, strong pressure can lead to a complete breaking of the display module and damage to its loops. It is necessary to work here carefully and neatly.
How to remove protective glass with iPhone 5S, 4S
Even considering the fact that the period of operation of protective glass is longer than the films, it also needs to be changed. The glass goes on a silicone substrate, so firmly adjacent to the display. It will take a certain skill for its removal.
Before removing the protective element, you need to carefully prepare and acquire some tools and materials, namely:
- Spatula (or thin plastic card), mediator.
- Silicone sucker.
- Lint-free napkin.
- The means for cleaning the glasses, which includes alcohol.
- Gloves.
Sometimes it happens that all the tools and materials listed above are included with the new protective glass. But it happens quite rarely.
And the glass removal algorithm itself includes the following steps:
1 You need to wash your hands well with soap before starting work, and then dry them. You can not do this, but just put on gloves. It is necessary that the display does not remain fingerprints or there are no divorces. 2 If the glass is damaged, you need to select the area that is best preserved, and on which there is no chip. In this place you need to attach the sucker, tightly pressed it. 3 That is the angle to which the sucker is attached, you need to put a mediator or blade, and pry it. The edge of the coating should be detached. For this purpose, it will take a little pulling the sucker on yourself, but not much. To the screen does not break. So we will reach the goal so that a small distance is formed between the screen and the glass. But if you did not have a suction cup, just enter the mediator dealer. 4 In the course of the pair of glass, deepen the tool. And if the display is large, you can use for a procedure 2 of the mediator or spatula, promoting them in different directions. 5 And the last step - we pull the sucker on yourself so that the glass is completely separated from the screen. At the same time, you can grab his edges with your fingers and do a similar one.
How to stick glass on iPhone 6 and other devices
So that everything went perfectly, stick the glass is needed in a clean room where there is no dust. Before the glass sticker you need to take a lint-free napkin or a simple cloth, a little wet the display with a cleansing or alcohol. It is necessary for cleaning the surface and removing fat elements from it.
The blending procedure is as follows:
1 In the hands takes a new protective coating for the display. As when removing, the hands should be clean and dry. Or you need to put on gloves. 2 The protective film covering the sticky surface is removed. To do this, it is necessary to pick it up for the tongue and pull. 3 And how to glue the element itself? The glass must be kept as close as possible to the iPhone display, so that the small pieces of garbage or dust fall on it. After all, any surface has a property to quickly accumulate dust. 4 A few millimeters from the display to place a glass coating, align and select it. When sticking, you need to act gently and carefully monitor that all the holes for the keys, the dynamics and other elements coincide. 5 Further Protective Glass on the iPhone 5 is lowered closer to the screen. Slightly adding and smoothing movements, the surface is recreated. So easily we were able to glue the glass to the display. 6 The surface is wiping with a dry cloth. 7 is removed from above the glued element that protects the glass.If at the end of the procedure under the protective element you will see small dust, you can spare part of the glass and pour them with a vacuum cleaner or remove with tweezers. Then you need to push the element back again. How to cross the glass, you already know.
Now you know how to stick a protective glass on the iPhone. There is nothing difficult in this procedure, replace the glass on the iPhone 5S is simpler. Glue protective glass on the iPhone need carefully prepared. And the main thing here is to keep clean in everything.
What is better - glass or film?
The answer is obvious - of course, it is better to make a choice in favor of glass protection. But it's not just a shockproof properties, but also in durability. It is only worth noting that the glass on iPhone 4 or another version of the gadget is twice as expensive than the usual film.
So the final choice is for the user. We will reflect yourself - what is better - to pay more expensive, but in the future to avoid expensive repair of the device or save now, but then lay out considerable funds. Screen replacement is one of the most expensive types of repair of "apple" gadgets. But, on the other hand, the film should also be called a bad option.
As a result, the summary will be the following. Film is available at a price. It protects the display from small scratches, removes the glare and covers the entire screen. Do you need a protective film for an iPhone screen, given its characteristics? Of course, yes. Moreover, the cost of its low, and how to stick the film is an even more simple task than in the case of glass.
Glass - expensive option. It gives glare, but skips light to the maximum, as well as reliably protects from strong drops and deep cracks. And if you found a way to accumulate on the iPhone, you will not arrange cheap options for protection. In any case, knowing how to accumulate on an expensive device, you can find funds for good accessories for the iPhone 6S or other apparatus.
