This article will show you how to disable Safe Mode on your Android device. You can find a solution to the problem of persistent reboot with activated safe mode. We have covered 7 ways to reset Safe Mode, problems that may arise and what to do if all else fails. Detailed instructions that will solve the problem in 9 out of 10 cases.
Sometimes a situation arises when a phone or tablet on Android needs to be loaded not in normal, but in safe mode. For example, when it starts to freeze and glitch. In such a situation, safe mode is used as a diagnostic tool. In most cases, putting the gadget into safe mode allows you to find and solve the problem, but sometimes it doesn't. Approximately 5-10% of users have a situation when it is impossible to return to normal mode and the phone is constantly restarted with active safe mode.
Safe Mode on Android - why you need it and how to enable it
Safe mode is needed when, as a result of interference with the firmware or the operating system, a system failure occurs and the phone does not work correctly, there are crashes, graphic artifacts or severe slowdowns. If you put the device in this mode, only system applications will start and the gadget's performance will resume.
If you are looking for an answer to the question of how to disable Safe Mode on Android, then you are faced with one of the above problems. You entered “safe mode” and then tried to enter normal operation and failed to do so. To carry out this operation, use one of the following methods.
We remove safe mode by means of Android
To find out if Safe Mode is on or not, look at the bottom left corner of the screen. It should display a shaded rectangle with a corresponding caption. If not, do the following:
- Through the menu, open a window that displays a button to turn off, restart, or put the phone in airplane mode. Or hold down the power off key of the device for a few seconds until the desired window appears;
- Press the “power off” button and hold until the message “go to safe mode? All third-party applications will be disabled ... ”.
If this inscription appears, then the phone is in normal operation mode and you do not need to turn off safe mode. If it does not appear, then your phone is booted in safe mode. To disable “safe mode”, simply reboot the device.
Turn off Android safe mode with a combination of buttons
Sometimes a reboot does not help and the gadget constantly boots in safe mode. Most often this happens due to the failure of factory applications that are configured to autostart. On some phones, “safe mode” can be disabled as follows:
- Turn off the device;
- Hold down the volume toggle button (down) and the power button. Hold both keys until the phone goes into Recovery. Now take out the battery and try to turn on the device;
- If everything went well, the gadget should boot normally.
Advice: do not use this method if the volume toggle button does not work or is stuck. Otherwise, the phone will always boot into safe mode. After that, only a flashing will help.
Open the system application “settings”. Go to the “restore and reset” or “backup and reset” section. Click the “factory reset” button. Wait for the device to recover to its default state and reboot.
If you are unable to reboot in “safe mode”, use the following instruction:
- Turn off the device;
- Simultaneously press the volume down button (on gadgets from Prestigio, HTC, Motorola, Huawei, LG) and the on / off button. If you need to turn off safe mode on Android on Samsung, hold down the “Home” button and the volume control button up;
- Wait for Recovery to load;
- In the menu that appears, select “reboot” or “reset device” or “erase data” (differently on different firmware);
- Use the sound setting keys to select this item and confirm by pressing the power button.
After that, your gadget should reboot, and the settings are reset to factory settings. Do not try to turn off or remove the battery until the bare version of Android is loaded, otherwise the device will have to be reflashed or carried to the SC.
Other ways to turn off safe mode in android
If the above answers to the question of how to remove safe mode on Android did not solve your problem, try using other methods that sometimes help:
- Remove the battery and put it back in after a few minutes. Perhaps safe mode is not disabled due to the fact that information about it is stored in short-term memory, which is responsible for temporarily storing the current time, date, time zone after removing the battery;
- Remove recently installed applications. The problem with disabling Safe Mode may be due to a crash in one of the apps you recently downloaded. This is rare, but it does happen sometimes;
- Remove applications that load into RAM immediately after loading. In most cases, they are the reason why it is impossible to exit safe mode. Remove such programs and try restarting your device. You can determine which particular application caused the problem by typing - erase the software one by one until you achieve the desired effect.
Not a single method of returning to normal mode helped? Take the gadget to a service center or change the firmware yourself. Most likely, there was a firmware failure on your phone. It sometimes happens after an update, after installing an unofficial firmware version, after receiving root rights and improperly modifying system files, etc. In this case, you will not be able to roll back the changes without a computer and replacing the firmware.
3 more useful articles:
Safe mode may turn on automatically on an Android device (tablet or phone) due to damage to the integrity of the case, power button or volume control. And also due to purely software conflicts between installed applications, as a result of operating system malfunctions.
In the latter case (in the absence of physical malfunctions) on Android, you can restore the standard operating mode by the following actions:
Note. If using one of the proposed options fails to remove the activated Safe Mode, try another. The disconnection procedure on mobile devices of different brands can be performed in different ways.
The ways
#1
1. Switch off your phone.
2. Open the case and remove the battery.
3. Insert the battery after a few minutes.
4. Switch on the phone, enter the PIN-code of the SIM-card.
5. When the boot is complete, the operating system will automatically restore to standard mode.
#2
2. From the menu that appears on the display, select Power Off.
3. Turn on the device again. And in the process of starting the operating system, when the logo appears on the display, press and hold the "Volume up" button.
#3
1. Hold down the "Shutdown" button.
2. Tap on the "Turn off" panel that opens.
3. Turn on your Android device. During system boot (after the logo appears), hold down the "Volume Down" button.
#4
If safe mode is enabled after installing an application, uninstall it and restart the device.
#5
Restart your device and hold the Home button while turning it on.
Successful and fast debugging of your Android device!
Yes, you heard right - Android devices have Safe Mode. Why is it needed? For example, you installed an application and after it your smartphone or tablet stopped working correctly. In safe mode, you can not only make sure that the problem is in the application (when the device boots, no third-party applications are launched), but also remove it.
How to enter Safe Mode on Android?
Let's first show an example on stock Android (version 4.4).
Press the on / off button of the device until a menu appears on the screen, as shown in the screenshot.
We tap on "Turn off the power" (or "Turn off") and hold your finger in this position for about one second, after which a sign will appear on the screen, symbolizing the transition to safe mode. In our case, there is no sign, a message appears immediately stating that the device will be rebooted. Click OK.
The device will reboot and boot it already in safe mode, as indicated by the corresponding inscription at the bottom of the screen. By the way, you may notice how much faster your device has become.
As for devices with other launchers, the process of enabling Safe Mode may be slightly different in them, but this is rare. The following example is based on Samsung Galaxy.
Turn off the device in the standard way. We launch it and as soon as the Samsung icon appears on the screen, press the volume down button (down) and hold it until the desktop is loaded.
As in the first case, in the lower left corner you will see the inscription "Safe Mode".
How to remove Safe Mode on Android?
To exit safe mode, press the power button, and then in the menu that appears on the screen, tap "Restart". If there is no such item, then click "Turn off the power".
After the gadget turns off, turn it on and do nothing. In other words, you just need to reboot your device. Note, however, that this does not work in some cases.
If we talk about the same Samsung Galaxy, you need to turn off your smartphone in the standard way - by pressing the "Power off" button.
The device will be turned off. Then turn it on and as soon as the Samsung logo appears, press the volume up key and hold it until the desktop loads.
As you can see, the inscription "Safe Mode" is gone.
There is another option. In the menu, which you can see in the shutter, there is a button Tap turn off Safe Mode (Open). Click on it.
Then confirm the action by clicking on the button with the same name.
The device will reboot normally.
How else can you turn off Safe Mode?
- If the method described above does not help, you can try turning on the gadget with the Power button or the volume up / down button pressed. You just need to be careful, because in this case, you can start another mode of operation of the device. Press the buttons one at a time when turning on the device.
- The following can also help: turn off the device, then remove the battery, if it is removable, and wait at least 1-2 minutes, then insert the battery and just turn on your device.
Any complex and multifunctional device always has a function that launches a certain safe mode. This avoids critical errors in the operation of the system, and can even prevent breakdown.
For example, the Windows operating system, when the graphics card is overloaded, displays a warning about changing the color scheme to a simplified one. And the kitchen multicooker simply turns off when it overheats.
A similar safe mode is provided for smartphones running on the Android operating system. In our article, we will tell you what this function is, how to enable and, most importantly, how to disable Safe Mode on Android if the system has launched it automatically.
What is Safe Mode for Android devices for?
Over time, the Android phone accumulates garbage from the work of numerous third-party applications, which negatively affects performance. Low-quality programs downloaded from third-party sources can harm the system software and overload the hardware of the device. Such applications can also carry virus programs.
In such cases, safe mode is launched on Android: all applications are disabled, except for the system ones, and only the main background processes continue to work.
How to enable safe mode
The user can switch to safe mode on his own. This can be done using the Android settings:
● Hold down the power button of the phone
● Wait for the dialog box to appear on the screen.
● Hold down the Power Off command
● When the window for entering safe mode appears, click OK
.jpg)
.jpg)
.jpg)
After the smartphone restarts, an indication will appear on the lock screen that the device is in safe mode. You can also determine this by the application icons. All third-party software shortcuts will be greyed out and unavailable to the user.
In safe mode, you can completely clean your smartphone by removing installed applications that are not used or aroused suspicion.
In addition to the standard function of putting the phone into safe mode, the user can use special applications available in the Google Play digital store. However, it should be borne in mind that such programs will definitely require root-rights. Rooting a mobile device, in itself, can lead to extremely negative consequences.
How to turn off safe mode on Android
There are several ways to switch the device to the main operating mode.
Method 1: Reboot the system
The simplest way, which is tied to the dialog box for turning off the device. Just hold down the power key of the smartphone and select the restart command in the window that appears.
Method 2: Remove the battery
This method will only work with devices that have a removable battery:
● Turn off your phone
● Remove the battery
● Wait about a minute
● Replace the battery and turn on the phone
Method 3: Via the Recovery menu
If the two previous methods did not work, the third, the most radical, remains. You can disable safe mode through the engineering menu. In this case, all user information, account data and third-party applications will be deleted from the phone. Also, the system will roll back to the system settings:
● Switch your phone off and on again
● On the Android logo loading screen, hold down the Power button and the volume down or up key
● Once in the Recovery menu, select the Wipe data / Factory Reset command
● Wait for the cleaning process to complete and select the Reboot command.
.jpg)
It is important to remember that system cleaning of the gadget only affects the internal memory of the device. All data stored on the SD card will remain unchanged. Therefore, if you decide to use such a harsh method of disabling Safe Mode, or a laptop as well.
User tips
If you want to avoid possible difficulties in the operation of the operating system and, in principle, expect to never be faced with the need to enable and disable safe mode, we recommend following simple rules:
● Don't download apps from suspicious sources
● Install a reliable antivirus program on your smartphone, which will cut out malware and start the procedure for cleaning the gadget from garbage
● Choose for yourself a reliable and productive smartphone that does not pump up even under excessive loads
In our case, such a smartphone was Fly Cirrus 7, on which we checked how to remove Safe Mode on Android. It is worth noting that for several months of using this gadget, we have never had a situation when it would be necessary to change the main mode of the operating system.
Why Fly
Throughout its 14-year history, the British company Fly has consistently guaranteed stable and productive operation of every mobile device produced. The high quality of Fly gadgets is due to the combination of an up-to-date operating system with a high-tech optimized filling. At the same time, Fly wins consumer confidence with extremely pleasant price tags for its smartphones.
.jpg)
Fly Cirrus 7 is also no exception in the tradition of producing excellent smartphones. The original Android without unnecessary upgrades and a powerful 4-core processor at 1.25 GHz ensure stable and smooth operation of the system interface and any applications. And if you are faced with the need for many hours of "general cleaning" and a total check of all subsystems, you do not need to think about recharging the gadget - a capacious 2600 mAh battery is responsible for long battery life.
You can find out more about the technical capabilities of a smartphone on the official website of Fly. Here, on the technical forum page, support specialists will answer any question related to the operation of the gadget.
Not everyone knows that, like in Windows OS, there is Safe Mode on Android devices. What is it and why is it needed, we will now figure it out.
Safe mode on android is a mode, when launched, only system preinstalled applications work. Everything that you downloaded and installed yourself will not function in this mode.
What is Safe Mode for?
For example, we installed a bunch of third-party applications on our device and one day a smartphone or tablet began to glitch, freeze, slow down and give various errors. We launch the smartphone in safe mode and remove all the "garbage" that could cause unstable operation of the device. If this does not help, then we can diagnose: a malfunction in the Android OS itself.
That is, Safe Mode is an excellent tool for diagnosing your device. Also, thanks to him, you can find out how much faster and better the "naked" android works, not cluttered with various widgets, applications and other software products.
All manipulations will be performed with the device running Android 5.0.2
Enabling Safe Mode
Method one
Instructions:
1. Press the on / off button of your smartphone to bring up the menu.
2. Press and hold the "Power off" button.
3. Another window will appear in which we will be offered to switch to safe mode. Click "ok".
4. That's all. After rebooting, we will enter Safe Mode. A corresponding inscription should appear at the bottom of the screen.
Method two
At the moment, there are various applications that allow you to easily and easily enter Safe Mode. One of them is called "Quick Reboot". You can download it
Instructions:
Download, install and run this application.
We go into the program settings by clicking the button of the same name.
Scroll down the list that appears, find the "Safe Mode" button and put a tick in front of it.
We go back and see that a new item "Safe Mode" has appeared in the main menu of the program.
Click on it and confirm the reboot by clicking "ok".
Another window will appear in which the program will request the provision of root rights. Click "allow".
The device will reboot and turn on in safe mode.
Method three
Another similar application is simply called "Reboot". In terms of functionality, it is similar to the previous version. You can download it
Instructions:
1. Download, install and launch the application.
2. After starting, we immediately provide the root-rights program by clicking the "allow" button.
3. In the main menu, select the "Safe Mode" item and click on it.
4. Confirm the restart by clicking "Yes, restart now".
5. After rebooting, we will enter safe mode.
Method four
This time we will use a program called Easy Reboot, which can be downloaded
Turn off safe mode
To exit Safe Mode, you just need to reboot your device. After turning it on, it should work in standard mode. If you have any problems and after restarting the smartphone is still working in safe mode, remove the battery, wait a minute and put it back in. This helps almost 100% of the time.
If this does not help, then try restarting your smartphone using the combination of the power buttons and volume + or volume-.
Conclusion
So we figured out what Safe Mode is and what it is intended for. Now, in case of unstable operation of your device, you will know how to diagnose the system yourself.
If you have any questions, then write them in the comments to the article and we will definitely answer.
