Many people have a problem when the touchpad on a laptop stops working. Someone begins to think that he is broken. But it could be turned off accidentally, or on purpose, so as not to press when typing. This article will show you how to enable the touchpad on different laptop models.
Reboot
The standard advice that starts solving many computer problems. Perhaps the touchpad driver has stopped working and restarting the laptop will fix the problem.
Keyboard shortcuts
Most laptops have hotkeys to turn the touchpad on and off. Usually you need to hold down the Fn key and one of the F1-F12 function keys.
Which buttons to press depends on the brand and model of the laptop. The touchbar is indicated by the following icon on the keyboard:
VAIO Control Center
The method works on VAIO laptops. If the keyboard does not have a button to enable or disable the touchpad:
- Open Control Panel → Hardware and Sound → Devices and Printers.
- Find and open your laptop in the list of devices.
- The VAIO Control Center will open. Select Keyboard & Mouse tab → Integrated Pointing Device and check the Enable checkbox.
- By clicking on the "Advanced" button, you can adjust the touchpad speed and see the available gestures.
- Apply the settings and close the window.
Additionally, on Windows 10, check the touchpad settings via Start → Settings → Devices → Mouse and Touchpad tab. At the bottom there is a button to open additional mouse settings. On the hardware tab, find your touchpad and in the properties see that it is not disabled.
BIOS settings
When you restart your computer, open the BIOS. Usually, keyboard shortcuts are written on the screen to open it. Here are the popular keys for entering BIOS: Del, F1, F2, F3, F10, Fn + F1, Esc, Ctrl + Alt + Esc, Del, Ctrl + Alt + S, Ctrl + Alt + Ins.
Open the "Advanced" tab and find the "Internal Pointing Device" option. The value should be “Enabled”.
After changing the settings, close the BIOS and save the settings: on the “Save & Exit” tab, click the “Save Changes and Reset” button (confirm - “Yes”).
Drivers
Drivers for the touchpad could crash as a result of a failure, due to reinstallation of Windows or antiviruses. Without drivers, the touchpad may not work in whole or in part (for example, only scrolling and gestures will break).
Find the driver disc that came with the laptop and install the driver on the touchpad. If there is no disk, download the drivers from the official website of the laptop manufacturer.
Synaptics touchpads
Many laptops have a Synaptics touchpad. Drivers for these touchpads create a separate tab in the mouse settings. There you can enable and disable the touchpad action. Sometimes the touchpad is automatically disabled when the mouse is connected to the laptop.
Settings can be found through Control Panel → Hardware and Sound → Mouse.
If all else fails
If none of the options helps, contact your service representative. The touchpad may be defective. It can be a physical breakdown, poor contacts, moisture trapped inside. The service center will be able to replace the touch panel with a new one.
It is primarily a mobile device. When developing a new model, engineers are trying to make the laptop more convenient for use outside the home or office. That is why all laptops are equipped with a touchpad.
But, if outside the usual workplace the touchpad turns out to be very useful, then at home or in the office, where it is possible to connect a mouse, it brings more inconvenience than benefit. Therefore, many users are interested in the question of how to disable the touchpad on a laptop.
Method number 1. Disable the touchpad using the button.
If you want to disable the touchpad on a laptop, the first thing to do is take a close look at the touchpad itself. Many laptop models have a dedicated button next to the touchpad to disable it. If there is such a button, then you just need to click on it.
If there is no separate button, then there may be a touch button on the touchpad itself. This button is usually marked with a dot. In order to disable the touchpad using the touch button, you just need to press it twice in a row (double click).
Method number 2. Disable the touchpad using the Fn button.
Laptops have an Fn function key. It is used to turn off and on various laptop functions. If the laptop does not have a button to disable the touchpad, then it must be with an Fn button, which implements this function.
In most cases, the following key combinations are used:
- On ASUS laptops: Fn + F9 or F7
- On Lenovo laptops: Fn + F8 or F5
- DELL laptops: Fn + F5
- On ACER laptops: Fn + F7;
- On Samsung laptops: Fn + F5 or F6;
- On Sony Vaio laptops: Fn + F1;
- On Toshiba laptops: Fn + F5;
FROM manual number 3. Software disabling of the touchpad.
In order to disable the touchpad in the Windows settings, you need to go to the "Hardware and Sound - Mouse" section.
In the window that opens, you need to go to the "Device Settings" tab. In some cases, this tab may have a different name, for example "ELAN".
On the "Device Settings" tab, click on the "Disable" button. This will disable your laptop's touchpad.
Also, in some cases on the "Device parameters" tab there is a function "Disconnect when connecting an external mouse". When this function is activated, the touchpad will only work when not connected to the laptop.
Important note, if you have opened the Hardware and Sound - Mouse window, but there is no Device Settings or ELAN tab, then you do not have the touchpad drivers installed. Install the driver and restart your computer. After that, the desired tab will appear.
Method number 4. Disabling the touchpad via BIOS
If you want to disable the touchpad on a laptop once and for all, then you can do it through the BIOS. To do this, find the function called "Internal Pointing Device". Usually this function is located in the "Advanced" section.
Find the "Internal Pointing Device" function and change its value from "Enabled" to "Disabled". After that, we exit the BIOS while saving the settings (this can be done by pressing the F10 button). After restarting your laptop, your touchpad will be completely disabled.
We noticed how often at times, i.e. panel, spoils the mood and significantly increases the time spent on work. For example, when typing a lot of text, the thumb of both hands is above the space bar. But next to the space is and, when you click on which, the cursor moves to another part of the document. If you rarely take your eyes off the keyboard, you will see that some of the text has jumped.
When buying, some users view the work of individual programs, then remove or disable unnecessary ones (in their opinion). Most touchpads today are manufactured by Synaptics. Devices of this company can be removed only with the installed program, but since the competent user got rid of it, therefore, it is beyond his power to perform this operation.
If this program was not on, it is recommended to refer to the original source, i.e. visit the manufacturer's web page and in the Download section look for anything related to Synaptics. You can also disable it by pressing the Fn + F7 key combination. Some laptop models have specific prompts in the form of pictures on the buttons. The touchpad disable button, as a rule, is located on the F7 key - it has a rectangular panel and an extended index finger on it.
In some cases, the touchpad can be disabled through the Device Manager applet, which can be invoked through the My Computer context menu. You need to find the touch device, call its context menu and select the "Disable" command.
Well, the most radical way is to apply a strip of wide adhesive tape to the touch panel, but this is only worthwhile in cases where other methods have not brought an effect.
Related Videos
A problem that many laptop owners face is the built-in touchpad, which prevents them from typing when accidentally touched. Disabling such a built-in mouse is a very simple matter, so you should no longer experience difficulties with the touchpad when working in text.
You will need
- Laptop with touchpad
Instructions
There are several different ways to solve this problem. If one fails, move on to the next. First, try pressing Fn + F9.
Very often, laptop users complain that the touchpad - a panel built into every laptop that replaces a mouse - gets in the way when typing or other intensive work with a favorite device. But not all owners of these devices know how to disable the touchpad on a laptop, and how easy it is to do it. This article will show users how to do it in several ways in a matter of seconds or minutes!
How can there be quite a few answers to the question. But let's not dwell on such extraordinary options as closing with a bank card or a sheet of paper, as well as moving to one of the rarely used areas of the screen, but focus on really working methods.
The easiest and fastest way to lock the sensitive touchpad is to press the Fn + F9 key combination. Pressing this keyboard shortcut again will make the panel active and use it as a mouse. It should be noted that some laptop models block the touchpad with a different combination - "Fn + F8" for Lenovo notebooks, "Fn + F7" for "Acer" or "Fn + F5" for "Dell". Many laptop manufacturers also provide their products with a small button that disables the touchpad (several HP laptop models have replaced this button with a small illuminated indicator, covering which you can also temporarily disable the touch mouse). It is located at the very border of the panel in a fairly convenient place.
The second method is that the sensor can be made to turn off automatically when a conventional mouse is connected to the USB port. How can I disable the touchpad on a laptop in this way? Quite simple - just go to the mouse settings on the tab called "Enable / Disable the touch panel" and change the value set there to "Disable".
Another option is to disable the touchpad using special programs. Among such utilities there are a lot of worthwhile software, for example, "Touchfreeze", "Pointing Device Driver" for sensors from "Synaptics" and "Elan Smart-Pad". The disadvantages of such a shutdown can be attributed only to the fact that additional software will need to be installed on the computer, and not all such utilities will work with the Windows 7 operating system, and the computer owner will again have to puzzle over how to disable the touchpad on a laptop.
If you decide to stop using the touchpad forever or at least for a long time, then you can turn it off in quite radical ways. You can enter through the BIOS and disable the touchpad in the "Internal Pointing Device" menu. Or go much further and, removing the front panel of the laptop, remove the ribbon cable connecting the motherboard to the touch pad. But in this case, it will not be so easy to make the touch "mouse" work again, to the laptop or to turn down the screen brightness.
But in many ways the solution to this problem depends on the specific laptop model. The above are just general ways of how to disable the touchpad on a laptop as quickly as possible. Some modern laptop models may also contain solutions laid down by the manufacturer, but the methods described in this article are also suitable for most laptops.
Before turning off this device in the most radical ways, you should think carefully. Do not forget that sometimes the touchpad can come in handy even with a regular mouse. For example, for a laptop it will interfere with the work of a normal mouse on a small table, and connecting a pair of removable media or a USB modem may simply physically leave no free connector for the mouse. Therefore, it is better to limit yourself to those methods that allow you to enable the touchpad as quickly as disable it.
Many users often need to disable the touchpad on an Asus laptop. Since in some cases it interferes with the normal operation of the keyboard. For example, when working in office applications, when you need to type large amounts of text, or in games.
There are many ways to solve this problem. All of them allow you to turn off the touchpad sensor and make working on a compact PC as comfortable as possible.
A touchpad is a special kind of sensor located on an Asus PC and used to move the cursor around the screen, perform a variety of actions.
This invention was born back in 1988, a certain George Herfeide became its author. Apple has licensed this invention and has been using it in its compact PCs since 1994.
The Touchpad consists of several main building blocks:
- printed circuit board;
- inductive-capacitive elements;
- matrices;
- insulating layer.
Most often, you can find this manipulation device, made in the form of a rectangle or square. Also, occasionally on exotic models of compact PCs, touchpads of a round or oval shape are used.
Disconnection methods
There are various ways to turn off the touchpad.
The most commonly used and available are the following:
- using the function keys;
- through the "Equipment Manager";
- using the control panel;
- in the BIOS.
Each method has its own advantages and disadvantages. The choice of one is a matter of taste and convenience.
Keys
The quickest and easiest way to disable the touchpad is to use the dedicated keys. They are present on almost any laptop keyboard from Asus and are very easy to find.
To deactivate the touchpad using only one keyboard, you must complete all the steps in strict order:
- open the laptop and turn it on;
- after starting the system, we find the key labeled "fn" (function key);
- without releasing it, press the "F7" key.
After completing these simple steps, the touchpad will most likely be disabled. Otherwise, you must use the F9 key instead of F7. On some Asus laptop models, the touch panel is turned off in this way. If neither one nor the other method helped, it is possible that the keyboard drivers are simply not installed on the laptop, which activate all its additional functions.
The solution to this problem is very simple. You just need to visit the official website of Asus and download the drivers from there, and then install them. This will not only allow the touchpad to be turned on and off when needed, but will also enable you to use the full functionality of the keyboard.
Video: on ASUS laptops, the touchpad is disabled via FN
Dispatcher
Another way to turn off the sensor is through the "Hardware Manager" of the windows operating system. This must be done as carefully as possible, since deleting some elements in its window may lead to the inoperability of the system. And even the need to reinstall it.
The dispatcher itself can be launched in various ways.
For advanced users, the following method is suitable:
After that, a dispatcher window should open, through which you can perform a variety of manipulations, including turning off the touchpad with just a couple of clicks.
The second, longer one, is through the "Control Panel":
After it is found, you need to start it with a double click and start disabling the touchpad.
Directly disabling the touch panel is carried out as follows:
After completing the entire list of the above steps step by step, the touchpad will be disabled. You can enable it just as simply: just perform the same operations, and in the "Driver" section, click on the button called "Enable".
Control Panel
You can disable the touchpad using the control panel.
This can be done as follows:
Switching off in this way can only be done if the Synaptisc sensor is used on the PC being configured. This is most likely the case. And with the proprietary drivers installed, the mouse properties will be displayed in exactly this way.
Need to remove the GRUB bootloader? Details here.
The last step is to agree to make changes to the system. In this way, the touch panel is turned off in windows 8.
You can also disable the touchpad without even logging into the operating system. To do this, start the BIOS and find the section responsible for configuring and managing the touch panel there.
To do this, it is necessary to carry out the following steps in the floor:
After completing all of the above steps, the laptop will restart. After the system starts up, you can make sure that the touchpad is not active. Enabling it via BIOS is carried out in the same way, you need to switch the "Internal Pointing Device" item to the "Enabled" position.
Disabling touchpad in windows 7 operating system has its own peculiarities. When performing a shutdown in windows 8, a restart is usually not required. Windows 7 often requires a system restart. Especially if you are using an old version that does not have the latest updates installed.
The most difficult and time-consuming method of removing a device from the system is to physically disconnect it.
In order to do this, you need the following tools:
When all the necessary items are ready, you can proceed directly to disassembling the device.
All screws that have been removed should be screwed back into place. Since the length and diameter of their threads may be different. Since later you will need to purchase them in the store.
proremontpk.ru
How do I turn off the touchpad on a laptop?
The touchpad is a touch-sensitive device that replaces the mouse. This tool is built into the laptop and therefore may cause discomfort when using an external mouse and original keyboard. As a result of typing, you involuntarily touch the touchpad, which, in turn, moves the cursor and changes the active elements.
The complexity of the situation lies in the lack of generally accepted standards for laptop manufacturers, so everyone gets out of the situation as they see fit. For the vast majority of users, especially active users, such a tool as a touchpad is not needed, as it is difficult to use and can interfere. It is extremely difficult to match the speed of surfing with a mouse or similar device.
We will analyze how to disable the touchpad on a windows 7 and higher laptop, among the methods there will be both general methods and point ones, taking into account the device model.
Disabling the touchpad with special combinations
Most laptops have similar functional buttons, the disadvantage is that they are individual for each manufacturer and even model. Still, the vast majority of combinations can be identified for a particular manufacturer, which we will find out later.
To use the following methods, you need to have installed drivers from the manufacturer, you can easily perform the action if you have not changed the OS installed upon purchase. Otherwise, you can always download the software on the manufacturer's website. Without such a program, you will not be able to use the buttons as intended.
See also: Touchpad not working on windows 10, what to do?
How to disable touchpad on Asus laptop?
Usually the manufacturer uses combinations of Fn plus or F7 or F9. You can find out more precisely by simply examining the keyboard in detail; a crossed out touchpad should be drawn on the active button.
Hurry up to find out - how to properly configure the Webcam?
How to disable touchpad on hp laptop?
There is a little more variety of methods, in addition to the active keys similar to the previous version, there is an additional opportunity, especially for new models, to use the active zone of the touchpad. In modern HP, the active key may simply not be there, but holding your finger for 5 seconds in the upper left corner or clicking here twice will achieve the same effect.
The touchpad is a handy thing for using in a mobile environment to quickly open multiple files. The problem happens when attaching the mouse and using it as the main source of control, touch the touchpad from time to time. In this case, the cursor jumps and it gets in the way.
How to turn off the touchpad on hp windows 10 laptop? - There are 2 fastest and most effective ways. The first is provided by the manufacturer, you just need to tap twice on the upper left corner, usually there is a noticeable notch.
In the Windows 10 system environment, you can also achieve this goal. You should click on Start and select "Options". Click on the "Devices" tile. Go to the mouse tab of the same name and expand the full list of settings. Follow the ELAN tab and check the box that indicates that the built-in device is disabled when a mouse is connected.
How to disable touchpad on Lenovo laptop?
There are also individual models with separate combinations, but for most laptops, it is enough to press Fn + F5 or F8 or another button with the corresponding icon.
Other manufacturers and their set of active combinations
- Acer - Fn + F7;
- Sony Vaio - Fn + F1;
- Samsung, Toshiba - Fn + F5.
Also, if such buttons do not work for you, then you should pay attention to their possible disabling in BIOS, in which case the name will be approximately the following "Function Key". Another logical option, if you have installed the drivers before, then some keyboard keys may not work for you.
How to connect a laptop to a TV Read also: How to enter BIOS in windows 10?
Disabling the touchpad from the Mouse menu
Here the action has the following meaning - to completely remove the activity of our device from the corresponding menu. Also one of the best ways, since it allows you not to search for active keys that are used in your model or, if you did not manage to use the previous method. You should:
- Start - Control Panel;
- Find the "Mouse" tile;
- Go to the "Device Settings" tab;
- Here, at your discretion, you can: just disable the touchpad or make it go into an inactive state when an external mouse is connected. Select the desired element by clicking.
In theory, the ambiguity on how to disable the touchpad on a windows 10 and older laptop should be eliminated, although even this method may not work in some cases.
Disabling the touchpad as a device
The principle is similar to the previous version, only the method of performing this task is different. Here we will use the Device Manager menu to be able to influence our touchpad. Do the following:
- Click Start, right-click on "Computer" and "Properties";
- Now click on the link "Device Manager";
- The hardware we need is in the Mice and Other Devices section, or possibly HID Devices;
- Right click on the touchpad and "Disable".
This is also one of the most effective ways to disable the touchpad on an asus windows 10 laptop, as well as on other manufacturers in general.
The previous and this method are the most versatile tools that can be applied to most computers.
Auxiliary methods
Several additional options for achieving the goal can be distinguished, although they all entail some inconveniences or disadvantages, nevertheless, they are quite suitable for use:
- Removing the device driver - I will not describe in detail, since the option is quite controversial and requires a lot of actions, although in fact it does the same thing as the previous method;
- Touchpad coating. You can simply glue it with some kind of oilcloth or other dense material, thus blocking the possibility of accidentally pressing the mouse;
- Physical disconnection of the device. If you are not afraid to disassemble your laptop, you can simply remove the plug from the connector, which, of course, will disable the touchpad.
All methods are working and are suitable for any model and situation. Based on your motives and resources, choose the appropriate option and apply it, getting rid of the inconvenience of unintentional use of the touchpad. If you still have questions on the topic "How to disable the touchpad on a laptop?", You can ask them in the comments
Was the material helpful to you? Leave your review or share in social. networks:
(1 ratings, average: 5.00 out of 5) Loading ...
tvoykomputer.ru
Instructions: How to disable the touchpad on a laptop Asus, HP, Lenovo and others on windows
The advantage of laptops is their portability and self-sufficiency. To work behind them, no additional input or output devices are required - everything you need is provided in such computers. At the same time, a laptop is often used at home or in an office stationary, and in such conditions, an additional monitor, printer, scanner or, more often, a mouse can be connected to them. When connecting a mouse to a laptop, it becomes necessary to deactivate the touchpad, which can accidentally work when using the keyboard. In this article, we will tell you how to disable the touchpad on a laptop Asus, HP, Samsung, Lenovo, Acer, Sony and others running windows.
Disabling the touchpad on a laptop through the "Control Panel"
The windows operating system works with this or that device on the computer after installing the drivers, and the touchpad in this case is no exception. Most laptops have Synaptics drivers installed by default that work with the touchpad touchpad. The graphical interface of this type of driver allows not only to disable the touch input panel completely, but also to configure it as needed.
To disable the touchpad on a laptop via Synaptics drivers, do the following:
Important: After reinstalling windows on a laptop, the Synaptics driver is not automatically installed. Also, it may not be present on some computers initially. As a result, this method of disabling the touchpad is not suitable for everyone.
Disabling the touchpad on a laptop through the "Device Manager"
If the Synaptics driver is not installed on your laptop, you can try disabling the touchpad through the All Computer Control Center. To do this, do the following:
Note: If you see multiple USB input devices connected and cannot determine which one is the touchpad, you can disable them one at a time. After each disconnected device, try to interact with the touchpad, and if it works, then turn the device back on and go to the next one.
Third-party programs to disable the touchpad
An easy way to disable the touchpad on a laptop is to download and install the Touchpad Blocker utility, which has several useful options for configuring the touch input device, and also implies the ability to completely deactivate it. You can download the Touchpad Blocker application from the official website of the developers. Once installed, it runs in the "background" performing the tasks that the user requires of it.
We propose to sort out the capabilities of the application, which does not have Russian localization, point by point. 
- This option is responsible for the automatic loading of the Touchpad Blocker application when the computer is turned on;
- A setting that enables or disables program notifications that appear in the tray when it is running;
- The most important setting in which the user can specify how long after clicking on the keyboard button the laptop's touchpad is disabled. If you want to completely block the touch input device, you can select this in the drop-down menu;
- If the touchpad has a separate button for scrolling the page content, it is blocked when this option is activated;
- Sound notification when the touchpad is disabled;
- Configuring "hot keys" to activate and deactivate the Touchpad Blocker program.
Disabling the touchpad using this program compares favorably with the options described above. With its help, you can configure the touchpad lock only during typing, so that there are no accidental movements and clicks, while the rest of the time the touchpad can work.
Disabling the touchpad on a laptop using hot keys
Each laptop has an FN function key on its keyboard. It allows you to perform actions pre-programmed into the computer, if pressed simultaneously with another key. Among such quick commands, almost all laptops have the ability to disable the touchpad. At the same time, each manufacturer sets its own keyboard shortcut to disable the touchpad, and below we will consider the most popular commands for deactivating the touchpad on laptops from various companies.
Asus
To disable the touchpad on an Asus laptop, you must press the key combination FN + F7 or FN + F9, depending on your computer model. Locate the icon in the lower left corner of the voiced keys that looks like a crossed out touchpad. 
HP
You can turn off the touchpad on HP notebooks by double-clicking on the upper left area of \u200b\u200bthe device's touchpad. Most often, the area that you need to double-click is highlighted with a depression. 
Acer
On most notebook models from Acer, the FN + F7 key combination allows you to disable the touchpad. This will work if a hand is drawn in the lower left corner of the F7 button pressing the touchpad. 
Sony
The combination for disabling the touchpad on Sony laptops is FN + F1. At the same time, the Vaio Control Center application is installed by default on Sony portable computers, where you can, among other things, turn off the touch panel. 
Lenovo
On laptops from the Chinese company Lenovo, the touchpad is disabled using the FN + F5 or FN + F8 key combination, depending on which of the buttons has a strikethrough panel. 
Samsung
The standardized command to disable the touchpad on Samsung laptops is FN + F5. 
If you have a laptop from another manufacturer, study the manual for it, which should indicate all the "quick commands" that can be performed using the FN button and other keys.
OkeyGeek.ru
Easy Ways: How to Disable the Touchpad on a Laptop
After reading this article, you will learn how to disable the touchpad on a laptop, even if it does not have an on / off key.
The touchpad is a component of the laptop (touchscreen), which is an alternative to the usual "mouse" manipulator. The creation technology is based on the use of a capacitive sensor.
He does not respond to the touch of third-party objects, only fingers.
There are many manufacturers in today's laptop market. The most popular ones are Asus, HP, Lenovo, Dell, Sony and Samsung. All of them are trying to improve their devices and bring new functionality to them.
This is why the touchpad will turn off differently on different laptops.
To begin with, we will consider a universal way of disconnecting, then the option with setting the appropriate driver in the Windows device manager and at the end of the article there will be disconnection methods that are individual for each popular laptop brand.
This method is suitable for all current versions of the operating system - windows 10/8/7, on which the device driver from the manufacturer is already installed.
First you need to check if you have the correct driver on your laptop:
- Go to the Device Manager window. To do this, right-click the touchpad or mouse on the "Start" icon and select the appropriate window from the pop-up menu, as shown in the figure below:
Enabling Windows Device Manager
- In the main window of the Task Manager that opens, find the tab of the computer manipulators and open it. Now find the device driver for your touchpad. It is highlighted in the figure below. Its name may differ depending on the computer model and the technology used by the touchpad itself.
Device Manager main window
- Click on the driver with the right mouse button and if the touchpad does not work correctly, click on the driver update field. It will download the latest software from the Internet automatically. To disable the touchpad in certain modes, right-click on the driver and go to the device properties window.
Now turn on the power management tab and check or uncheck the boxes for the required modes, as shown in the figure below. Thus, you can adjust the operation of the touchpad in different states of the laptop operating system;
Power management and touchpad shutdown modes
- Click OK to save your changes and exit the Device Manager pane. Restart your computer for the changes to take effect.
Now let's look at a universal shutdown method that will suit most laptops and all operating systems.
