The best android for 3g signal reception. Weak antenna signal on android. How to strengthen the signal of the phone: the reasons for a bad signal and solving the problem with your own hands

Internet access is necessary for every person for work, study or for their personal needs. The mobile phone does not always pick up the internet. Not everyone knows how to amplify the 3g signal of a smartphone.

In cities where there are a large number of mobile operators, there should be no "dead zones" for the Internet according to prior. In fact, everything is different: a person, moving around the area, periodically gets into them. This is due to architecture, the building material of which houses are built, metal structures. The reasons for poor internet include a lot of industrial interference.

To protect the smartphone from mechanical damage, different covers are sold. If there are metal inserts inside the protection, this affects the quality of the received signal 3g and 4g.

When a user leaves the city, a 3g signal amplifier for a smartphone is required, where the internet speed is abrupt or absent.

Almost all people use 3g or 4g internet, which is offered by mobile operators. It provides access to networks anywhere, unlike a wi-fi network. But due to the congestion of communication lines, the Internet speed drops to the level of 2g. Even if the phone is on a tariff with a good 3g or 4g speed, it guarantees that the speed will not slow down.

Two solutions will help to improve the reception of the smartphone - this is software and with the help of devices purchased or made on their own. Each method has its advantages. With an integrated approach to increasing the speed of the Internet connection, the user will achieve the fastest signal possible.

Software settings

Sometimes people are unhappy with the speed of the internet on their mobile phones. Everyone knows that the speed and quality of the Internet connection depend on the operator, the chosen tariff and coverage area. But not everyone knows that you can amplify the signal on a smartphone using the InternetSpeedMaster application. The program optimizes phone performance by modifying system files. Strengthening the antenna on a smartphone using the application is easy, but you need to be rooted, if the phone is rooted, the installation will take 2 minutes.

Program setting for 3g and 4g amplification

How to configure InternetSpeedMaster program to amplify 3G and 4G signal:

  1. log into the application and grant superuser rights;
  2. if the device is rooted, enter ApplyPatch, reboot. The Internet signal booster on the smartphone will work;
  3. if the user does not have superuser rights, enter the ImproveInternetConnection, then reboot the device.

This method does not work on all devices, so it is recommended that you first get root rights in order to surely increase the 3g signal on your smartphone.

If the user wants to return the old settings, it is recommended to enter the menu, press "Restore", confirm his actions by selecting the "OK" button.

Hardware improvement

You can strengthen the cellular signal on your smartphone by purchasing additional devices in specialized stores - a repeater and various types of antennas. Such devices significantly amplify the signal coming from the operator. In this situation, no manipulation of the device files is required.

All devices connected to the Internet 3g or 4g, included in the antenna coverage area, increase the download speed. To amplify a 3g signal for a smartphone with your own hands in a country house or apartment, you need to take steps that will enable the operator's signal to reach as quickly as possible.

Despite the widespread use mobile communication , the question of how to strengthen the signal of the phone, or rather cellular communication to which it is connected. It doesn't matter if you live in a small village or in a metropolis, the likelihood that your device will stop picking up a signal is everywhere. Operators are gradually solving this problem, new base stations appear, and communications are increasing. What if the problem is with your phone and not the network? Today we decided to figure out what the bad signal level is connected with and whether it is possible to fix it with our own hands.

The principle of cellular communication is quite simple: there is a base station of the operator and your phone, a radio frequency channel is organized between them, through which SMS messages are transmitted, calls are made, data is exchanged on the Internet. There are several standards for cellular communication, differing in the signal transmission method and frequency. Typically, base stations are erected at higher elevations in order to provide maximum coverage. However, you can't get away from the obstacles that prevent the signal from passing through. It can be walls, trees, and other obstacles, upon contact with which the signal weakens.


It is clear that in an open area where high-rise buildings do not abound, the coverage area will be higher. For example, for stations operating according to the GSM-900 standard, in this case the zone is no more than 30,000 kilometers. In urban areas, the figure is reduced to 7 kilometers. Stations with more advanced communication standards such as 3G and LTE cover an area that is half the diameter.

Why do we have a weak phone signal?

Due to the above mentioned barriers, so-called dead zones or holes in the coating can form. That is, places where the signal is weak, unstable or completely absent. Where people most often encounter poor signal strength on the phone:

  • places located at a significant distance from the nearest station (there is simply no coverage);
  • basements, underground parking lots, lowlands (the signal cannot simply penetrate here);
  • hills, skyscrapers (often “to rise higher” does not mean the presence of a signal - there is often no signal above the 12-14th floor);
  • buildings made of metal structures that do not transmit a signal.

However, obstacles and remoteness from the station are not always the reason for the lack of a signal. The user's phone is often the cause. You have probably been in situations where a friend has a cellular signal, but you do not. And at the same time, you use the services of one operator. Cases are common when two identical phones have different signal levels. There can be many reasons:

  • a phone in a metal case or in a metal case can catch the network much worse than a plastic device;
  • quite often, no matter how surprising it sounds to you, the reason is the "clumsy" firmware of the phone;
  • damage to any components as a result of falls, immersion in water, and so on;
  • the phone may have a defective antenna from the factory, which is especially the case with Chinese manufacturers of inexpensive models.

How to amplify a phone signal with your own hands?

Well, let's go over the theory, let's move on to practice. We will look at several ways to amplify a cellular signal, from the simplest to the most complex and expensive.

The reason is the firmware

It is worth starting with checking the correctness of the software before trying to get to the insides of the phone. Hundreds of users face the deterioration of the communication signal that appears after flashing, so attention should be focused. we have already written, so we will not repeat ourselves. Firmware is a fairly simple process, but with its own nuances. The main thing - do not forget to do backups important files.

If the flashing helped, then we congratulate you, if the phone still does not catch the network well, then move on to the next item.


The signal is poorly picked up due to damage to the phone

As already noted, the phone often picks up the signal poorly after accidentally falling on a tile or plunging into the sea. In this case, the average user has no choice but to go to service center ... Modern phones are quite complex devices, so most people cannot identify the source of the problem on their own. It is likely that specialists will detect damage and perform necessary work so that your phone can again cope with network search without any problems.

How to amplify a phone signal with your own hands


In most cases, the reason for a weak cellular signal lies in a defect in the antenna, which, in fact, is responsible for this function. Often, owners of inexpensive smartphones from the Middle Kingdom are faced with the fact that the manufacturer cheated a little by loosely connecting the antenna to motherboard devices. You can correct the mistake yourself, but you need at least a little understanding of how the phone works. Otherwise, we contact the service center with a description of the problem.

  1. today smartphones are represented by a very different design, therefore, they are disassembled in different ways; the easiest way to get to the insides of a phone with a removable cover and battery is more difficult when the smartphone is not separable;

Do not hurry... Before starting the disassembly, find a video or text material on the Internet that will show and tell you how to disassemble your particular device, what you should pay attention to.

Please also note: after disassembling your smartphone, you lose your warranty.

  1. as a rule, the antenna is hidden in the lower or upper part of the case, represented by small copper strips (again, for the location of the antenna specifically in your model, see the corresponding materials);
  2. after you get to the board, you will find several spring contacts, which should fit snugly against the ribbon cable located on the back of the structure;
  3. if spring contacts motherboard do not adhere poorly to the train, carefully correct them, armed, for example, with tweezers;
  4. assembling the phone and enjoying a good network signal.
We connect a homemade antenna to the phone to enhance the signal


The above methods only work if the problem lies in your phone. But, as we noted at the beginning of the material, the reason bad signal there may be various kinds of obstacles or significant distance from the station. In this case, you can try to amplify the antenna of our device with just a piece of wire.

Immediately, we note that the method is not suitable for all phones. The fact is that for its implementation you will need a special diagnostic port, which is difficult to get to in a modern non-separable smartphone (in a number of models it cannot be found at all). It looks like a small round-shaped connector in golden color.

    take a small piece of thin insulated wire;

    insert into the connector;

    we put it so that it does not interfere with other components and the closure of the lid.

Everything, as practice shows, the signal of the telephone network is greatly enhanced. Isn't it amazing ?!


Some users inserted a piece of wire into the 3.5 mm port (under the headphones). Sometimes it works too.

Sticker or foil to enhance the phone signal


In the vastness of foreign online stores, it will not be difficult to find a bunch of different devices for signal amplification. Among them, a small sticker-sticker is popular, which is a few metal tracks, which, according to the manufacturer, allow you to get rid of interference.

Similar stripes can be seen in some smartphones by default, so the “magic” properties of the sticker have a right to life.

However, to achieve a slight improvement in the signal, according to a considerable number of users, a piece of ordinary foil will help. It is located under the phone cover, closer to the antenna. The method is simple, so you can try.

Strengthening communication using a repeater

In some cases, when the signal cannot be amplified by any of the methods (too thick walls of the room, distance from base station) use special antennas or repeaters. Such devices can greatly enhance the signal, but their cost often scares off a potential buyer.

Where to buy cheap?

You can build something similar with your own hands, but often it does not amplify the signal at all or does it very, very badly.

For example, some people use the following method:

  1. we take a metal rod (50 cm is enough), a coaxial cable, a piece of foil (about 10x4 cm) and plywood or plastic;
  2. we bend the metal rod so that we get a diamond-shaped structure;
  3. glue the foil to the plywood;
  4. we connect the metal rhombus and the foil by means of a coaxial cable (solder);
  5. the end, on which the rhombus turned out to be, we raise it higher, the other, with foil, we leave it at the bottom;
  6. we bring the phone to the foil to check the signal quality.

You will probably need to find the most suitable place for the resulting structure to catch the signal.

It is clear that such an amplifier is unlikely to provide communication for a large company that was not lucky enough to have an office in an area without network coverage. Here you will have to seek help from specialists. Today, many companies provide such services, and not only offer modern equipment, but also install it. By the way, it is not worth saving on specialists - for installation, workers use special devices that help determine the most suitable place, select frequencies, etc. For a regular user of course, such a task will be difficult to cope with.


The positive point is that engineers have already come up with several options for getting rid of such inconveniences. The disadvantages include the requirements for additional financial investments and the complexity of setting up communication amplification systems. However, let's not get ahead of ourselves and tell you about all this in order.

Signal booster for mobile phone

The simplest way to avoid a weak signal is to install the amplifier not on a specific area or building, but on a specific phone. Similar antenna amplifiers look like stickers and are glued inside the body of the device or on its back cover.

The signal is amplified by changing the directional pattern of the phone's own antenna and increasing the total induction of the two antennas.

The disadvantage of this method can be considered a change in the circular reception of a mobile phone to a narrowly directed one. Simply put, the signal will improve significantly when you point your phone towards the tower. mobile operator ... In other cases, the signal quality, on the contrary, will drop. How effective such a mobile signal amplifier is for you personally is, of course, to decide on your own.

The next way to enhance the quality of communication is a point amplifier of a mobile communication signal with a small coverage radius. This option is suitable for cases where the signal area is only a few meters from your workplace.

Despite the widespread use of mobile communications, the question of how to strengthen the signal of the phone, or rather the cellular connection to which it is connected, is still relevant. It doesn't matter if you live in a small village ...

Our Android Market is your right choice!

Android Is the mobile platform on which many mobile phones of our time are based. Such an operating system allows the development of Java applications. The Android OS was recently developed by 30 companies led by Google Corporation. Working with the Android operating system is very convenient, faster and more efficient.

Today many programs, games, applications are being created for this mobile platform. Hundreds of thousands of such applications have already been created, which have been translated into the main leading languages \u200b\u200bof the world. There are a huge number of sites on the Internet that host both free and paid programs and applications that are suitable for every touchscreen phone, as well as ordinary phones with the Android system. But you should visit our site, because it is very convenient, easy to use, and most importantly contains the newest and latest applications.

Programs for android are completely new and useful additions. They allow you to expand absolutely all the capabilities of the communicator. Programs exist so that each user can accomplish absolutely all the desired goals on his phone. There is a huge selection of programs on our site: security programs, a converter, a calculator, financial programs, applications for Android, software that allows you to read books and many other equally useful programs. Downloading universal programs like Word, Microsoft Excel or Microsoft PowerPoint is now possible too!

Android games Are the most modern, colorful, bright and interesting games of the 21st century. You can download games on every site that specializes in games, but on our site downloading will turn into a sheer pleasure. The need for games and applications in our time is growing every day. Users want to download and start using the latest applications, and our site will only help to achieve this goal.

All Apps, games and programs can be found in online stores and Google Play sites or as they are also called Android Market. Such a store is our site, where you can download various latest applications. To download something, you just need to register, and the download operation itself is very simple. It contains a huge variety of applications for every taste. In addition, you can easily carefully examine the most complete catalog, where all information is described, there are screenshots and reviews of other users about any application or program. Our Android Market Is a great choice! If you download programs from us, then you can be sure of the high quality of applications. Having downloaded one program on our website, you will want to do it over and over again, you can be sure of it!

NetScream modifies your modem options and prevents nasty connection drops and hangs. Simply put, it improves the speed of your Internet connection. One of the best modem booster on the market, it speeds up your download / upload speed. A very easy-to-use program, fully compatible with all versions of Microsoft Windows and compatible with all types of Internet connections. Download music, movies and play online games at a faster speed. The program makes direct changes to the system registry and system files to speed up downloading / uploading files. Automatically sets settings and changes based on the characteristics of the computer and modem, and also has a built-in fault tolerance system.

NetScream is a tool that allows you to modify your modem settings to increase your Internet connection speed up to 200% or more! No changes are made to your hardware and all settings and settings are done in a very simple interface that even a child can use. Most of the other modem amplifiers promise a lot, however you don't notice any change in speed when running. In contrast, this software has gone through many tests and trials to prove that it actually works. Whether you are using a 14.4 / 28.8 / 33.6 / 56k modem, cable modem, or DSL modem, NetScream will speed up your Internet connection. Also note that NetScream makes changes to the modem settings in order to fix annoying connection drops and hangs. You no longer need to endure connection drops in the middle of downloading a large file.

Key features and functions

  • increases the speed of transmission over the Internet, as well as over a local network;
  • simple, intuitive interface that allows you to change settings very quickly.

Hello dear readers!

Most owners of various gadgets based on the Android system are unhappy with the "snail" speed of the Internet of their devices.

However, today there are certain programs with which you can significantly increase the connection speed.

Today I would like to tell you about the three most popular and effective ones.

Internet Speed \u200b\u200bMaster

Internet Speed \u200b\u200bMaster is a program to improve internet speed on android devices. It was created by the developers of Nez Droid. The trial version of the program can be downloaded for free and easily on the developer's website.

The software optimizes the settings of the database transfer system by modifying certain system files. The program supports absolutely all versions of Android, as well as firmware options. Among them there are those in which the problem with speed has already been solved, which is why it is impossible to say with complete certainty whether the application will be able to speed up the Internet on your tablet or smartphone.

How to speed up your connection with Internet Speed \u200b\u200bMaster?

The scheme is as follows:

  1. Open the program.
  2. During the first launch, it will ask for root access. Leave it to her.
  3. If you have root rights, click "Apply Patch", as a result, the device should reboot.
  4. After the device turns on, you can verify the effectiveness of the actions taken.

If there is no root, click "Improve Internet Connection" and reboot your device. From my own experience, I can say that such a "thing" does not work on all devices, so it's better to take the trouble to acquire root rights. Thanks to them, you can speed up the Internet on your device without any undesirable consequences.

To return to the old settings, it will be enough to click on "Restore" in the main menu and click on "OK", thereby confirming that the system files have been restored.

So that you do not blame me later, I repeat again, Internet Speed \u200b\u200bMaster will not help you if your Internet speed has already been increased with your firmware.

Signal Booster 2X

The second booster program that I would like to tell you about is called Signal Booster 2X. It is much easier to install than the one I wrote about above. The main features of this app:

  • You just need to click on the "signal accelerator" button and the application will automatically restart Wi-Fi and restore the signal.
  • If the signal in your location is not strong enough, the system will immediately inform you about it and suggest a number of actions to improve it.
  • Intuitive interface.

When you are in an area of \u200b\u200bpoor coverage, the 2X signal amplification system will come in handy. Its presence will improve the performance of your device in WI-FI / LTE / 4G / 3G networks.

Software Speed \u200b\u200b3G Modem

This application was created to increase the connection speed of a 3g modem with the world wide web. The program allows you to speed up the connection several times by optimizing the bandwidth.

Despite the fact that this application was developed to solve problems with 3g Internet, it can improve the quality of the connection even with the usual connection method. The discussed program functions and configures the connection automatically.

You need to connect to the network, launch the application. The program menu is designed in Russian. Click on "speed up" and move the slider to the "fast" mark.

That's all I wanted to tell you. Use my advice and enjoy all the delights of the World Wide Web. If you cannot cope with the recommendations on your own, then pay attention to the training course “ Genius geek", Which will reveal to you all the secrets of the computer and the Internet! The training course is simple and understandable for people of any age.

Share useful information from the blog in the social. networks, subscribe to updates and become computer geniuses. See you!

Yours faithfully! Abdullin Ruslan

Did you like the article? To share with friends: