Many people think that a wireless speaker can only be used to amplify the sound of a smartphone - by connecting the phone and launching your playlist. However, some models support FM radio and may pick up local waves.
Can I turn on the radio on my JBL speaker?
Despite the fact that the internet is full of instructions on how to tune radio stations on JBL speakers, only one model from this manufacturer is actually equipped with an FM tuner - the JBL Tuner FM. It is easy to distinguish from other speakers - it has an external antenna, typical of radio devices.
JBL Tuner FM is equipped with a 5W 45mm speaker with a frequency range of 85-20000Hz. The operating time of the device from the built-in battery is 8 hours. The speaker has a small display and a fairly clear control panel, on which you can simply tune the radio - everything is just like on a regular receiver. There are five separate buttons for storing your favorite radio stations.
All other JBL speakers cannot pick up the radio signal on their own. However, users often buy inexpensive analogs / replicas of popular devices of a famous brand - and now they can just replace the radio. How to distinguish an original JBL speaker from a copy, we told in. The main criterion for determining the original will be the price - fakes are much cheaper than products on official sites like "I take!" or "M.Video".
How to tune the radio on a copy of a JBL Xtreme speaker
To explain how to turn on the radio, let's take one of the most popular JBL cues - a copy of the JBL Xtreme speaker. First, you need to connect a wire to the device, which will serve as an antenna for receiving a signal. It can be a complete AUX or regular headphones with a 3.5 mm audio jack.
Press the Bluetooth button twice - but not quickly, but with an interval of about 2 seconds. The first press will switch the speaker to AUX (wire playback mode), the second press will switch to radio mode.
There is a JBL Connect button next to the Bluetooth button - it looks like two triangles. Click on it to start tuning radio stations. When you turn on the radio for the first time, you will need to wait a little while the receiver picks up the wave.
Press the Play / Pause button several times to start the setup. The radio will automatically switch and store channels. To stop searching, press the pause button again.
To switch radio stations, use the "+" and "-" buttons (short press). A long press on the same keys will change the sound volume.
Column JBL - how to tune the radio, alternative ways
If you were unable to figure out how to turn on the radio on a JBL speaker, most likely you are the proud owner of an original device that does not support FM broadcasting. Do not despair, you can use your smartphone as a radio and simply play content via Bluetooth.
Listen to programs on the radio station's website
Google the name of your favorite radio station - for sure it has its own website that will broadcast. Technically, in this case, you do not catch the radio signal, but simply play it online through the speaker. This method has its advantages:
- You don't need an antenna wire to tune the radio.
- You can control the sound and change the wave remotely, rather than pressing the speaker buttons.
In addition, many sites have the ability to rewind or skip tracks that you do not like, pause playback or listen to programs that have already been on the air and have been archived. It is also convenient that the names and artists of all songs are signed online - useful if you hear something new and want to add it to your playlist.
Listen to the radio via the app
Many Android smartphones have a standard FM Radio app. For its operation, as in the case of the speaker, you will need an AUX cable or wired headphones. The program interface consists of a list of saved radio stations and a wave tuning area - everything is very simple and really looks like a regular radio. This method is suitable if your Bluetooth speaker does not support radio broadcasting. Otherwise, it will be easier to plug the same wire into the speaker and configure everything as described above without using a smartphone.
Another way to listen to the radio is to download the application of the selected station and install it on your gadget. As a rule, if a channel has its own add-on for phones, this is talked about during on-air advertising. In any case, you can just search for it in the application store - Play Market or Apple Store. The application interface is likely to be similar to the radio station's website. For example, at the Moscow "Radio 7" you can not only listen to music through your smartphone, but also read news, find out the program schedule, select a playlist according to your mood or a podcast from the archive.
A portable bluetooth speaker is a compact device for amplifying the sound volume of a playback device and playing audio files. It can be connected to a computer, audio system, smartphone and almost any gadget via bluetooth connection or using a 3.5 mm mini jack to enjoy music anytime, anywhere.
The principle of operation of a bluetooth speaker
The principle of operation of a Bluetooth speaker is not very different from how standard audio devices work. The most commonly used speakers with neodymium magnets with a power of 2 W and an amplifier up to 3 W. A required attribute of the device is a mini-USB connector on the side panel, as well as indicators for charging and power. Some models have added a display with a clock. The mid-range devices have a lithium battery, while the more expensive models have lithium-ion batteries.
JBL Flip 3 Portable Speaker Diagram
Connection types
Although the main format for using a portable audio device is wireless connection, it also has an input jack for a 3.5 mm cable for wired connection.
Bluetooth
To connect the speaker to the device, you need to start it in BT mode, after which it will become available on all laptops, smartphones and tablets with Bluetooth enabled. In the list of found devices, you need to select the name of the column for pairing both devices and wait for the connection. All data necessary for playback of audio recordings is transmitted over a distance of up to 10 meters.
Some devices are capable of transmitting a signal over 15-30 meters.
By audio cable
Most speaker models have an audio input for a 3.5mm jack cable. Some devices are equipped with a 2.5 mm mini-jack connector. This parameter must be indicated on the product packaging.
To connect, you need to insert one end of the cable into the speaker connector, and the other into the connector of the connected device: laptop or computer. In some cases, you will need to perform speaker detection in the Windows settings if this operating system is installed on the computer.
JBL portable speaker with micro-USB and mini-jack 3.5 mm
Ways to connect to different devices and step-by-step instructions
The way to connect a portable audio speaker depends on the type of playback device, whether it has a Bluetooth function or a wired connector.
How to connect to computer and laptop
Before connecting speakers to a laptop, you need to make sure that Bluetooth is turned on on it. Speakers usually have an on / off switch that must be held down for a few seconds to activate the wireless transmission function. There are also devices in which the pairing function starts automatically for a few seconds or minutes after being turned on.
JBL portable speaker control panel
A flashing light will appear when the speakers are ready to pair. Now you need to click "Start", go to the "Settings" section of the computer menu, select "Devices" to see a list of all installed devices. There is a list on the left, where, among other things, a Bluetooth icon will be displayed, which you need to click on in order for the laptop to start looking for devices with which it can pair.
If the computer cannot find the speakers, you may need to repeat the procedure. Many models are programmed to automatically disconnect pairing after a while if a suitable device for connection was not found. If the speakers are found, you need to select them in the list of devices and click "Connect".
Sometimes additional authorization is required. This is necessary to confirm that the user wants to connect the devices on their own, and not someone is trying to hack into the computer via bluetooth. There are several ways to authorize, but most often you need to enter the appropriate code indicated in the user manual or on the sticker of the device.
If the required code is not on the box, you can try entering the password "0000" or "1111". This works in cases where the manufacturer installs the code on the devices himself. Pairing occurs only after authorization. After connecting the speakers, they will be available in the "Settings" section menu, and then "Devices".
How to connect to a phone or tablet
It is easier to connect bluetooth speakers to mobile devices than to a laptop and especially a stationary PC, which requires a wired connection or the installation of a Bluetooth module. To pair the speaker with your phone or tablet, you need to follow a few simple steps:
- Go to the "Settings" menu section of the phone.
- Open the "Bluetooth" tab.
- Select the "Turn on Bluetooth" option.
After completing the above steps, a list of devices available for pairing will open. If the name of your portable audio device does not appear in the list, you can search for it. After the equipment is connected, the smartphone will save its name in the list of available devices and the next time it is connected, no search is required.
How to connect to TV
The first thing to do when connecting a Bluetooth speaker to your TV is to check if it supports such a connection. Many modern TVs support the wireless function, which eliminates the need to purchase an external module. To pair with the speakers, select the "Connected devices" item in the main menu and find the "Bluetooth" section. After that, you need to activate the function and search for devices to connect.
If the TV does not support the wireless function, you need to inspect the back of the TV, where the 3.5 mm jacks are located. The presence and type of audio connectors determines which type of external Bluetooth module is required. The external module is connected to the corresponding connector and is put into pairing mode by holding the connection button on the speaker.
The TV automatically recognizes that a device is connected to one of its audio outputs, so the user does not need to make any additional settings. If this is not the case, you need to refer to the user manual and find a way to change the audio output.
If you need to use two bluetooth speakers, you need to find a transmitter that is compatible with multiple outputs. Avantree Priva or Miccus Mini Jack TX4 is a good example of such a device.
How to connect speakers to each other
To connect two speakers to one gadget, you need devices of the same model or brand. The connection type depends on the device, OS used by your phone, computer or tablet. In most cases, Bluetooth speaker pairing goes like this:
- two speakers are connected with a 3.5 mm jack cable with an adapter;
- one of the devices connects to the gadget.
There are several applications that you can use to connect multiple Bluetooth speakers. These are the AmpMe, Bose Connect and Ultimate Ears apps that have PartyUp mode. AmpMe is the most versatile as it is brand independent, while the Bose and Ultimate Ears apps only require a device from the respective company.
AmpMe is an app that can sync smartphones and Bluetooth speakers to stream audio from SoundCloud, Spotify, YouTube, or from users' own media library.
Some systems require an app connection, but others, such as JBL, can use multiple audio speakers without using third-party software.
Setting up a JBL bluetooth speaker
JBL is one of the popular brands of audio equipment, the website of which contains a detailed description of connecting Bluetooth speakers of all models of the manufacturer. To pair the devices, follow these steps:
- Put the speakers in discoverable mode by following the steps in the user manual. The Bluetooth function may remain available for 60 seconds, after which it will need to be reactivated.
- Enable Bluetooth discovery mode on a laptop, tablet or smartphone, depending on the operating system (Windows, Mac, Linux).
After activating the system, the name of the audio speaker will appear in the list of devices available for pairing. To connect several speakers to a laptop or smartphone at once, you need to perform several steps:
- Turn on the JBL speaker. The device needs to be put into pairing mode by pressing and holding the Bluetooth button for 3 seconds.
- Play music on your first device. You can use any cloud service or your own music library to play music.
- Press the Connect button on all speakers. The button is designed in the form of an hourglass, and before pressing it, you need to place all the speakers next to each other.
- Wait for connection. The speakers will be connected within 30 seconds. Once this is done, music will start playing through both speakers.
If you need to break the connection with any of the speakers, you need to click the "Connect" button next to the name of the desired device again.
How to enable bass
To turn on the bass on the JBL speakers, you need to simultaneously press the Bluetooth function activation and volume down buttons. It is not recommended to listen to music in this mode all the time - it can damage the speaker.
How to turn on the radio
To tune the radio on the speaker, you need to insert a USB cable into it, which acts as an antenna. After that, you need to press the power button and the adjacent button with an hourglass sign for the radio to turn on. It is tuned using the Play / Stop buttons, and the search for radio stations is carried out using the plus and minus buttons.
How to connect a USB flash drive
In some models of JBL portable speakers, it is not possible to connect a USB flash drive: they play music only via Bluetooth, Wi / Fi, or via a wire with a 3.5 Jack connector. New models are equipped with a USB connector, which is located on the side panel of the device under a dense rubber cover. After connecting the flash drive, the device will automatically play the audio tracks that are on it.
Charging the bluetooth speaker
The device is charged by connecting it to a computer, laptop or power adapter with a micro USB connector.
Basic connection errors and remedial measures
Connecting a wireless speaker does not require any special knowledge and takes no more than 5 minutes. But sometimes users are faced with the fact that the bluetooth speaker does not work and there are various reasons for this.
The speaker is too far from the playback device
Each Bluetooth device has its own range of operation. The small speaker works uninterruptedly at a distance of up to 10 meters, and some even at a distance of 25 meters from the device. But cheaper models often have problems with signal reception after a few meters away from the playback device. In addition, a natural obstacle such as a concrete wall can break the connection. You can check if the distance between the devices is too great or if there are any obstacles in their route, you can read the instructions.
Frequency interference
Wi-Fi, mobile phone, microwave oven are devices that operate in the 2.4 GHz or 5 GHz frequency band and therefore may adversely affect the performance of the Bluetooth speaker. To identify this negative factor, you need to turn on the speaker and place it next to one of the potential interference generating devices. If the music plays with noise, you need to change the frequency settings for sending and receiving data on the playback device and speaker so that they do not work at the same frequencies.
Incorrectly connected speaker
If the device is paired with a computer or laptop, it may intermittently lose communication with it due to improper connection. Updating the connection is simple - you need to uncheck the box with a headset in the connected devices window and instead click on the sound settings of the wireless speaker, choosing the desired configuration.
Overflowed cache
If there are problems in the operation of a bluetooth speaker when it is connected to a mobile phone or tablet, the reason is probably the overflowing RAM of the device. You need to remove any unnecessary files and programs that interfere with the phone and its wireless connection to the speaker.
Outdated software
The speaker may have outdated software that is not suitable for connection to a new model of smartphone, tablet, or laptop. To fix the problem, you need to check the drivers on the manufacturer's website, install the necessary updates and reconnect to the playback device.
Portable Bluetooth speakers are suitable for listening to music anytime, anywhere, and their advantage is their compact size and lightness. They connect to any gadget with the available bluetooth function, USB or Z, 5mm jack. They do not require a wired connection, and they can be charged via a cable by connecting a power supply or rechargeable battery.
A portable speaker allows you to listen to music anywhere: in the park, while hiking in Kok-Zhailau or while playing sports. There are hundreds of such devices on the market, and the more you choose, the more chances you have to make a mistake. Often the choice is made based on looks or battery life, but we think these are not the main criteria. Choosing a speaker is no easier than choosing a speaker system. There are many technical characteristics to consider.
# 1. Which speaker is called portable?
"Portable" doesn't mean "small". It is believed that a portable speaker must easily fit into a backpack or even a pocket. But it also happens that the column has decent dimensions and weighs five or even ten kilograms. Therefore, portability is primarily not size or weight, but ease of connection and sound adjustment, as well as the ability to work autonomously without connecting to a network.
No. 2. What kind of portable speakers are there?
In an amicable way, the speaker can replace a home audio system. Moreover, it has several advantages over its bulky counterparts: the wires do not dangle, the speaker can be placed anywhere, and sound control is available from anywhere within the network's range. Moreover, the stylish speaker will become an interior decoration. And most importantly, you can take it with you on vacation at any time to continue enjoying the music. For example, the Sony SRS-XB30 model is made of polycarbonate with a rubberized coating and protection against moisture according to the IPX5 standard.
No. 3. Good. Is the sound reproduction technology the same in all speakers?
No. From the point of view of technology, columns are divided into three types:
- Mono speaker. There is only one speaker, sometimes quite loud, but don't expect surround sound.
- Stereo speaker. Two or more speakers sound much more interesting than one, but only with sufficient volume and correct positioning relative to the listener.
- Systems 2.1. There is also a subwoofer, so high-quality rock is worth listening to on such models, however, they are not very compact.
No. 4. Who needs a portable speaker?
Not everyone can afford a sophisticated speaker system, but the sound of a computer or smartphone is often lacking. The compromise solution is a portable speaker.
The ancestors of modern portable speakers were portable tape recorders with built-in speakers (remember those huge things?). Since then, at least thirty years have passed, but the purpose of the technology has remained the same: portable acoustics allows the owner and his environment to listen to music where they want, and as loudly as they want.
As for the sound, modern speakers are also far ahead. They are capable of reproducing bass, adequately displaying the acoustic-frequency picture with all dynamic nuances. Of course, they still have to grow to full-fledged sound, but at the current stage, portable speakers are showing tremendous progress.
No. 5. How to choose a column?
The effectiveness of any gadget depends on the conditions in which it will be used. It is illogical to buy a 3kg suitcase for breeze and music cycling trips, and with a tiny pocket device, there is no point in throwing parties on the beach. It is best to choose a middle ground - a column that will open to the maximum under different conditions. As with full-length speakers, loudness, clarity and detail are important here.
Kilogram speakers are often considered a compromise. In addition, some models, in particular the Sony SRS-XB30, have a mode Party Chain, with which you can connect up to 10 speakers in one bundle and increase the sound power tenfold. In addition, Sony has NFC technology - fast wireless communication with a small coverage area between all devices of the brand. This is actually Party Hard mode.
No. 6. But does the size of the battery matter?
Sure. You will still carry a portable speaker with you, so its operating time should be enough for 4-6 hours. These are the average figures for the market, but in conditions of long trips, of course, more time is needed for battery life. In the case of the Sony SRS-XB30, it all depends on whether the backlight is working, for example, and in what climatic conditions the device is located (ideally, we are talking about 24 hours of uninterrupted operation). The speaker Sony SRS-XB30, thanks to its large battery capacity, can be effectively used not only for its intended purpose, but also as a power bank for your mobile phone.
No. 7. What else should you pay attention to?
The number of speakers and their size. Sometimes this can be seen through the grid, sometimes the parameters are honestly indicated by the manufacturer. A single-emitter speaker will not sound as clear at full volume as a split speaker. A one-channel speaker sounds in mono, a two-channel speaker sounds stereo. The difference between mono and stereo sound is spatial sound: mono sound has no volume.
Dimensions. All for the same reason as above, this must be taken into account: too voluminous or heavy acoustics will not be very comfortable on trips. On the other hand, you can proceed from the needs: decide for yourself what is more important to you - power or compactness.
Control... Even if the portable speaker is synchronized via Bluetooth, it is desirable that you can control music and volume from the case as well. The speaker is often controlled via Bluetooth - the Sony SRS-XB30 model has a Hands Free function that allows you to answer hands-free calls without interrupting the connection with the speaker and without spoiling the atmosphere at the party.
Power. The output power does not affect the sound quality, but indicates the maximum volume of the speaker. The starting point is 1.5 watts per speaker. Such a speaker will sound a little louder than a smartphone. A column with average performance has a power of 16-20 W, and 60 W is already a monster, similar in sound to basic multimedia acoustics. By the way, pay attention to the presence of a subwoofer in the speaker - its power is taken into account separately.
No. 8. How do you know if you like the sound of a speaker?
Pay attention to personal feelings first. As with headphones, nothing matters if the sound is not to your ears. But if you still want to figure it out, then you should again pay attention to the number of speakers - they provide a frequency range. The wider the frequency range, the better the sound quality. Portable acoustics reproduce high frequencies in the range of 10,000-55,000 Hz. "Bottom" - in the range of 20-500 Hz: the lower this figure, the juicier the sound. The columns contain all sorts of additional features, depending on the manufacturer. In the case of Sony, this is a function Extra Bass that enhances the sound of low frequencies.
No. 9. Where and what is a column for?
The volume of the smartphone will be low in open spaces, and stationary systems need an outlet. A portable speaker is a compromise: in terms of power, it is comparable to an inexpensive home speaker. It can be connected to a laptop or tablet to watch movies with high quality, loud sound. It won't take up much space in your suitcase or travel bag. You can connect your smartphone via Bleutooth without getting up from the sun lounger.
In some models, manufacturers expand functionality in order to customize the product for the needs of the user. If you are a partygoer, then you probably know that not only music is important for a quality atmosphere, but also the right light. So, Sony on the front side of the speaker has implemented a multi-color linear backlight and strobe, which are most conveniently controlled through the Sony Music Center application.
Alexander Grishin
Do you want to enjoy your favorite music on your mobile device, but the volume and bass are not enough for you? Not sure if you can connect speakers to your phone via bluetooth? Read our instructions and you will learn how to connect speakers to your phone in three different ways:
- via bluetooth
- using a USB and AUX cable (if the speakers do not have their own power supply)
- using an AUX cable (if the speakers have their own power supply)
If you know how to connect, but you can't do it, at the bottom of the article we have collected recommendations that can help solve the problem.
Method 1 - via Bluetooth connection
Let's consider how to connect a Bluetooth speaker to your phone. This method is very convenient, since you do not have to use wires when connecting.
In addition, unlike ordinary speakers (for example, from a computer, or a music center), Bluetooth speakers usually have a small size and stylish appearance, such as this small model from Nokia:
A big plus is also the compatibility of almost all wireless speakers and smartphones with each other, regardless of the manufacturer. For example, you can easily connect a Sony Bluetooth speaker to a Samsung phone.
Connecting bluetooth speakers on smartphones with Android and iPhone is carried out in the same way:
- Turn on the speaker and activate Bluetooth on it (if it does not start automatically);
- On the phone, go to the "Settings" (or "Options") menu;
- Open the Bluetooth section;
- Move the slider of the same name to the right to activate the wireless connection and start searching for available devices;
- After the list of devices is displayed, find the name of your speaker in it and click on it within a few seconds, a connection should be made, and the speaker should make a sound or change the color of the indicator (depending on the model);
- Try playing music on your phone. The sound should play from the speaker.
If you have models from JBL, then two speakers can be connected to the phone at once!
By the way, almost all wireless speakers have a 3.5 mm jack, which means they can be connected via an AUX cable.
Method 2 - connect speakers to your phone via USB and AUX?
If the speakers do not have their own power source (for example, some ancient Sven speakers) and can only be powered via USB, then to connect you will need an adapter from ordinary USB to mini or micro USB (depending on your phone model), USB cable and AUX is a cable.
The adapter can be purchased at any computer store. It looks something like this:
The connection is carried out as follows:
- Insert the adapter into the phone jack, and into it the USB cable from the speakers. Connect the other end of the USB cable to the speakers themselves. Thus, the phone will be used as a power source
- Connect the devices with the AUX cable.
With this method of connection, it is better to use speakers with an amplifier so that there is no extraneous noise and low-quality sound.
Method 3 - via the AUX cable
Another way to connect speakers is to connect them to your phone using an AUX cable that has 3.5mm plugs at both ends. It is sold in any electronics store and looks like this:
To connect in this way, the speakers must have their own power source (battery or plug for connecting to an outlet). The procedure is as follows:
- Include columns
- Insert one end of the cable into the headphone jack on the speakers
- Insert the other end into the 3.5 mm jack on the phone
- An icon or a signature with the text “ Audio jack connected».
Ready. You can enjoy the music!
If the speaker does not connect to the phone
If the speaker does not connect to the phone via Bluetooth, or the connection is made, but the sound from the speaker does not come, then try the following recommendations:
- Restart your phone first (it helps a lot)
- Make sure the speaker is in Bluetooth mode correctly. This can usually be seen by the indicator on the dynamics, but to be sure, look at the instructions.
- Make sure there are no other Bluetooth connections (such as headphones) at the moment. The phone can only connect to one gadget at a time.
- Some speakers have a "weak" Bluetooth module and work only in close proximity to the smartphone. To eliminate the influence of this fact, try connecting two devices at a minimum distance from each other.
- Reset the speaker settings. It is usually done by pressing multiple buttons at the same time. The combinations vary from model to model, so see your speaker's manual.
- If the connection was made, but the sound does not go, then try to break the connection, and then, in the Bluetooth settings menu of the phone, click on the name of the speaker, and then select the item " Forget this device". After that, search for available devices again and try to connect.
- Try connecting your smartphone to another device. If it also does not connect to it, then most likely there is a software malfunction. In this case (if rebooting or updating the system did not help), do a factory reset on your phone.
- If none of the above helped us, then perhaps there is a malfunction in the operation of the Bluetooh module of one of the devices. In this case, it is worth contacting specialists.
Bluetooth is a wireless technology that allows two or more devices to be connected over a short distance. Whereas in the past this communication method was mainly used to exchange data between two mobile phones, today bluetooth is used to connect a smartphone and a wireless accessory.
Bluetooth connects to a wireless headset, headphones, smart watches, pedometers or wireless speakers. Here, Bluetooth has a lot of appeal, as the connection is simple and the signal range is sufficient up to 10m, which is enough.
When you disconnect due to distance between devices, most gadgets will automatically reconnect once they get close.
Turning on bluetooth on your smartphone is simple. On the notification bar, tap the Bluetooth icon to activate it, and then hold it to configure (but this may not work on some gadgets).
You can access additional settings from the "Phone" - "Settings" - "Wireless & networks" - "Bluetooth" menu.
An important concept of bluetooth technology is "Visibility", which determines whether the phone is visible to other devices (whether it appears in the list of available).
Visibility can only be enabled temporarily to connect to another gadget. Once the devices are connected to each other, visibility is optional. Conversely, it is recommended to turn off visibility unless you plan on connecting to a new gadget.
NFC is a wireless technology that allows wireless communication between devices such as smartphones or smart gadgets over a short distance. NFC makes it easy to set up data exchange.
Let's consider a connection via bluetooth using the example of a JBL wireless speaker.
Wired connection
Connect the audio speaker to the phone with a wired method, possibly as follows:
- through the AUX cable, then the audio speaker must have its own power source;
- via USB and AUX if the speaker does not have its own power supply.
Less and less often, you can find models that are equipped with an AUX input. Nevertheless, this connection provides sound quality, although it is not completely portable. You can connect multiple speakers using an AUX cable.
Wireless connection
You can use Wi-Fi or bluetooth to connect the speaker wirelessly. Moreover, not all audio systems support the first technology. Expensive and very expensive models have such support.
Most likely, in the near future, portable speakers will be equipped with an inexpensive Wi-Fi adapter, but for now you will have to be content with what you have.
A popular way to connect portable audio speakers to a smartphone is using Bluetooth wireless technology.
Let's consider how to use a bluetooth speaker using the JBL as an example.
The process of connecting two devices using Bluetooth technology is called Bluetooth pairing. To connect two accessories together, important conditions must be met:
- both devices must have active Bluetooth;
- the device we want to connect to must be visible;
- the accessory has pairing mode enabled (this will make it visible).
How to connect a JBL speaker to Android via Bluetooth
- Make sure the audio speaker is turned on.
- Open the notification panel on your phone.
- While holding the Bluetooth button, turn on the blue tooth.
- Activate the "Search" button.
- When bluetooth is activated, the search for nearby devices may start automatically.
- The smartphone display will show the bluetooth devices that are located nearby. Choose the one that matches your audio speaker in name.
- Synchronization starts. You may need to enter a code located at the bottom of the column.
Sometimes you need to hold down the power button for a few seconds. In most cases, nothing is required.
Next time, the connection will be made automatically as soon as the audio speaker is turned on (do not forget that bluetooth must be turned on for this).
Connecting to a Samsung phone
- Connecting a bluetooth speaker to a Samsung phone is simple. Let's consider an example Samsung Galaxy.
- Open Bluetooth settings. Make sure your smartphone and your JBL wireless speaker are paired.
- Tap on the speaker name on your smartphone to activate the pop-up menu. Open the "Options" section.
- Instead of the "phone" profile, select the "media" profile.
- Click the "connect" button and wait for the green check mark to appear, which indicates that your JBL speaker is connected.
iPhone
Turn on the speaker and set the pairing mode. For information on how to enable pairing mode, refer to the manual that comes with your speaker.
- On your phone, open “settings”.
- Click bluetooth.
- Move the Bluetooth enable slider to the right.
- You will see a list of devices that are located near the iPhone.
- Find and click on the column name.
Listen to music through your portable speaker. The sound will now play through your wireless speaker.
Turning on the speaker via bluetooth on the phone
Once you set up the connection of the JBL audio speaker to your smartphone, the next time you turn on the speaker, the device will connect automatically if you have Bluetooth enabled on your device. This is convenient when using the speaker from your phone.
Conclusion
The popularity of portable speakers is due to the ease of use and the ability to literally take your music with you. The only thing that the user needs to master is how to connect a wireless speaker via bluetooth. We hope that after reading this article, you will not have any questions.
In this article, we talked about how easy and reasonable it is to use Bluetooth wireless technology, how to connect another device, turn on a speaker (portable) or other smart gadget.
