Want to watch an interesting video, but your Yandex browser refuses to play video clips? This question is not difficult, but it cannot be called trivial either, because some users do not know how to make settings in one browser or another. Now I will show with an example how to enable Adobe Flash Player in Yandex browser so that you can solve this issue on your computer.
I myself have witnessed how the user was poking around in the browser settings for a long time and painfully. Although this setting done in a couple of clicks, to help other users and my readers, I decided to make a small instruction on this issue.
Adobe Flash Player update
First, I advise you to delete old version flash player and replace it with a newer one. Attention! If you know how to remove programs by standards windows tools, then you don't need to read this part of the article, just uninstall Adobe Flash Player and move on.
Before starting this procedure, close all browsers so that the plugin can be removed without any problems. To uninstall this application, you must go to the "Control Panel" and select "Programs and Features" from the list.
After that, a window will open with a list of all programs installed on your system. Select the Adobe Flash Player to uninstall and click the "Uninstall" button. A window for uninstalling the application you specified opens in front of you. Confirm the deletion by clicking the "Delete" button and wait for the end of this action.
Note: if the program does not want to be removed or the recommendations from the article will not help, then try uninstalling Adobe Flash Player special utilitywhich can be downloaded. This page also describes how to use it, you just need to translate it.
When the uninstallation of the plugin is complete, restart your computer to avoid possible conflicts further. Now go to and download the new version of the player. Discover boot file... This will start the installation of this player on your computer, in which you need to tick the conditions license agreement... All browsers must be closed! Wait until the installation of the application is completed, then close the window using the "Finish" button. Restart your computer again. Now a new version installed.
Selecting modules in the Yandex browser
To see the required modules, click on the top right "Details".
Find Adobe Flash Player from the entire list. In the screenshot below you can see two active Shockwave Flash modules. If you have problems with video playback in this browser, then try to disable one of the modules (by clicking on the corresponding link) and restart the browser: close and reopen. If you have both disabled, then click "Enable". It may be that the problem remains, then turn on the module that you just turned off and turn off the other.
Let me remind you, if nothing worked for you, then remove the player with a utility from the developers and try the described steps again. Usually this procedure helps in solving this issue.
Now enjoy watching thrilling movies online or simply fun and entertaining videos. You will no longer have a question on how to enable Adobe Flash Player in Yandex browser. After all, you yourself perfectly understand how this is done.
Google chrome is identical to the Yandex browser, you can see:
Each of us at least once in our life came across the annoying inscription "Click to launch Adobe Flash Player" and often each of us had to click a button to launch this plugin, although there is a more rational solution to this problem. A similar message appears because the "Run plugins on demand" checkbox is checked in the browser settings, which on the one hand saves traffic, but on the other hand wastes the user's time. Actually, this leads to the fact that Adobe Flash Player swears at you and asks you to start the plugin manually by clicking on the button. You can uncheck this checkbox in the browser settings, depending on the specific browser, the location of the settings is different (below are the options for setting on the example of two popular browsers). However, there are exceptions, for example, with the well-known Opera browser.
Often so that such an inscription does not appear in opera browser, you need to disable Turbo mode, which prevents the browser from launching the plugin automatically. Act this regime focuses on speeding up the loading of site pages, however, for this, the browser shamelessly disables various kinds of add-ons, which leads to saving traffic and reducing the time spent on loading content. To disable Turbo mode in the Opera browser, you must perform the following steps, and from version to version, this button did not change its location:
- Press the red "Opera" button in the upper left corner and go to the pop-up list;
- Uncheck the box "Opera Turbo", in some browser versions, the button is simply called "Turbo".
Now Adobe Flash Player will not swear and ask you to press the button again. Everything is very simple!
Of course, it may be not only in the "Turbo" mode, but as mentioned above - the plug-in is simply disabled in the browser settings. Fortunately, the inclusion of plugins in the Opera browser is very convenient and the settings themselves are not buried deep.
Let's take a closer look at how to uncheck the "Run plugins on demand" checkbox using several popular browsers as an example. As test subjects, we will consider the browsers Google Chrome and Mozilla Firefox, since most of the Runet users prefer these browsers. So, let's begin.
Google Chrome browser (Google Chrome).
Press the "Menu" button and look for the "Settings" item, then go to the "Show additional settings" item, then in the window that opens, we find the "Plugins" item, and just below the "Manage individual plugins" item.
In the list of plugins that appears, among which there are many useful and not so much, we find the inscription Adobe Flash Player and click the "Enable" button. Wuol! The plugin is enabled and will now launch automatically as soon as you open a page with embedded video content using Adobe Flash Player.
Mozilla Firefox browser (Mozila Firefox).
Click on the "Menu" button, then go to the "Add-ons" item, then focus on the "Plugins" panel, then find the "Shockwave Flash" item and set it to the automatic position (depending on the version and language, this position may be called all in different ways).
Thus, we coped with the task and turned off the annoying inscription, thereby saving our time and nerves. The principle of including plugins in different browsers the same, only the interfaces differ. If in the Opera browser this is done in one place, then in the browser Internet Explorer completely different. One way or another, you can handle this inscription in any browser of any version!
Flash Player is a cross-platform add-on for the full operation of various browsers. It allows you to view videos, interactive presentations and animations in the browser window, as well as play dynamic applications.
Flash player for Google Chrome is a separate topic for conversation, since the browser does not use a common system plug-in, but an already built-in one, which is installed along with the program.
Special module for Google Chrome
The Adobe Flash Player plugin integrates into Google Chrome with version 10.2 and higher. The exact name of the plugin is Pepper Flash Player. Another name is Shockwave Flash. It is also called the PPAPI version of the player. Development is the responsibility of Google. In other browsers, it is not installed, but can be manually unpacked and pasted into the browser. For this there is special procedure with a set of commands. One of the commands usually produces an error like this: mv: Could not stat for "unpackchrome / opt / google / chrome / PepperFlash / libpepflashplayer.so": No such file or directory.
The error has to be solved. However, why bother when you can use a regular plugin and not rack your brains?
This is because Pepper Flash is the most modern and safe option... This is a new generation of plugins that maximizes the capabilities of browsers.
How to update the Pepper Flash player?
If the browser is used as the main one, the user should rarely ask questions about Flash. Nevertheless, errors occur and, most likely, they can be solved by updates.
The program updates the plugin automatically along with its upgrade, so first you need to make sure that you have the latest version of the browser.
- Open the menu (an icon of three horizontal lines). Find the item "Help", and in it the first section "About google browser Chrome ". If the browser is the latest version, then proceed.
- In the navigation enter chrome: // components.
- Find the Pepper Flash plugin and click on "Update". The button can also be on english language - Check for update, by clicking on which, the user will start a search for possible new versions. If options are found, the update will begin.
Another solution to the problem with the built-in plugin
Sometimes the plug-in built into the browser may malfunction. To remedy the situation, you can disable the browser Adobe. Thus, the Google browser will have to download the general system add-on.
If all your multimedia files are played in other browsers, and there is a player settings icon in the control panel, then you already have it installed. If not, you need to download it.
There are several signs that indicate that it still does not hurt to install a different version or update the player. Update if:
- The plugin does not work or simply does not respond.
- The previously downloaded version is still in beta testing.
- Certain functions are missing from the standard system plugin.
- The browser slows down when opening new pages that contain multimedia screensavers.
Where can I get a regular player?
To download Adobe Flash Player, you need to go to the official website of the program: http://get.adobe.com/ru/flashplayer/. Click on "Install Now".
You shouldn't choose Google Chrome, but some other browser. Otherwise, the following notification will appear:
How to install?
Consider the most popular OS among PC users, that is, Windows.
1.Download the flash player on the official resource. It will be completely free.
2. Run the downloaded file located on the download panel. As the installer recommends, check the box to the left of "Allow Adobe to install updates." Click on "Next".
3. The installation will start. You will be told when the procedure is complete.
How to enable or disable?
- In the navigation bar, write the command: about: plugins. Click on the plus sign in the upper right next to the inscription "Details" or, in other words, "Details".
- Since you have already downloaded the system plugin, two modules will be shown. If both are marked as included, the version that ships with Chrome will be used. One plug-in is located in the browser folder - it must be disabled by clicking “Disable”. Another is in system folder Windows.
- Restart your browser. The system flash will now be used by default.
Sometimes, Adobe Flash Player in Google Chrome may not launch automatically when opening web pages. To configure the launch of the plugin for all sites, you need to check the box to the left of "Always allow" or, in other words, "Always run".
You can update the flash player for Google Chrome using the browser itself, which will launch a search. There is an option to download the plugin separately and integrate it further, but the first method is easier.
Sometimes the video does not play, giving the error “ Adobe Player Flash Player is already installed but disabled ..... ". Flash Player is based on the Netscape Plug-in Programming Interface (NPAPI). The official Google website says that all plugins created using this technology harm browser security, and most of the functions of some plugins were taken over by HTML5 code. For this reason, a decision was made with 01.09.15 opt out of such plugins. But below is a way to deal with it.
Ways to enable the Adobe Flash Player plugin
The hard way
First of all, we will check if you have the latest version of the browser, if not, then we update to the latest version. If after the update the Flash player does not work, then you will need to enable this plugin in Google Chrome. Open the menu in the upper right corner of the Settings window and google management Chrome and select Settings
In the opened settings, we are looking for Show advanced settings ...
Find the section Personal data and press the button Content setting
After that, look for the Plugins subsection and click management of individual plugins
Find Adobe Flash Player in the plugins window and enable it.
Wait a way
In order to avoid searching through menus, submenus and generally wasting time looking for settings buried in the depths of the browser, simply enter chrome: // plugins / in the address bar and press Enter in the loaded page with plugins, we find Flash player - turn it on or off and tick the "Always run" box. In the address bar, enter chrome: // components / find the "pepper_flash" section, click Check for updates. - The advice is relevant if you want to enable flash player in google chrome versions 56 and below. In 57, the option was removed.
Sometimes it happens like this - you installed Flash Player with Google Chrome turned on, or another browser, then you just need to restart the browser. If the problem is not solved by this method, then we can advise you to switch to another browser, for example, Mozilla Firefox, etc. The latter is interesting because it installs itself latest version plugin. All you need to do is
enable flash on sites when content appears that is not displayed (check the "run" when the browser asks). If something does not work out, we recommend that you write to the program support service.
Almost every user has come across a program called Adobe Flash Player. How do I enable it? What is required for this? How important is this program in general? Why is it needed? The answers to all these questions will be given below. In fact, now it is difficult to imagine a PC user who has never worked with "Adobe Flash Player". Why?
Description and getting started
The point is that this application is a kind of graphic module. It allows browsers to work with graphics. With it, you can watch videos, pictures, listen to music, play games and run applications online. Every computer must have an Adobe Flash Player. How do I enable it?
First you need to install this application. By default, it is not present on any computer or browser. Therefore, you will have to:
- Go to official page "Adobe Flash Player".
- Go to the "Downloads" section.
- Choose last update programs for their operating system.
- Download setup file on a PC and then launch it. It is recommended to close the browser during initialization.
- Follow the instructions in the installer to complete the installation procedure for Adobe Flash Player. How do I enable it after that? Usually a simple browser restart is sufficient.
Only sometimes this technique doesn't work. Due to system crashes or incorrect operation of the browser, the application under study is disabled. It has to be activated manually. How?
Opera
It all depends on what kind of browser a person is using. Several leaders will be discussed next. Let's start with the Opera. Regardless of the operating system, the user will have to adhere to a specific algorithm of actions.
Most quick fix is the following instruction:
- Open "Opera".
- Write opera: // plugins in the address bar. It will not be difficult to enable Adobe Flash Player after that.
- A menu with installed plugins will appear. It is necessary to find there the previously mentioned program.
- Click on the Enable button.
If the plugin is not in the specified window, it will have to be installed according to the previously proposed scheme. You can visit the "Plugins" section in Opera by opening the "Options" menu and selecting the appropriate line.
Work in Yandex.Browser
The next browser we plan to work with is Yandex. This is a relatively new application that has won the hearts of many users. How do I get Flash Player to work here?
In general, the algorithm of actions will not change. It is necessary:
- Open Yandex.Browser. It is recommended to close all open tabs before starting the process.
- Enter browser: // plugins in the line at the top of the screen. After that, it's easier to enable Adobe Flash Player than it seems.
- To find the desired program in the list that appears.
- Click on "On" in the appropriate window.
Nothing else is needed. You can bring your idea to life by going to the "Add-ons" - "Plugins" section. There will be a corresponding attachment.
Google chrome
The next browser is Google. It is one of the most popular of all Internet applications. Need to get started with Adobe Flash Player? How do I enable it?
Required:
- Run on google computer Chrome.
- Print chrome: plugins in the address bar. Press "Enter" to go to the corresponding menu item.
- Click on the "Enable" button in the Adobe Flash Player window.
- Check the box next to "Always allow". This will keep the application running continuously.
The above examples indicate that with all browsers, the process of enabling "Flash Player" is approximately the same. It is enough to visit the "Plugins" menu item, having previously installed the application on your PC.
Mozilla firefox
Finally, consider working with one more popular browser - Mozilla firefox... What to do with this application?
- Launch Mozilla.
- Go to "Tools" - "Add-ons".
- Open "Plugins".
- Find "Adobe Flash Player" in the appropriate field. Click on Enable at the bottom of this window.
After that, Adobe Flash Player is activated. How to turn it on this program in this or that browser? Now you know the answer to this question.
