If you insert the stock Megaphone M150-2 into the router, then nothing will happen ( UPD with firmware 6.30.2, STICK firmware is already defined, see comments). The fact is that HUAWEI E3372s works in two versions of STICK and HILINK firmware. The firmware is completely interchangeable. To work with Mikrotik, you need to upgrade the modem to HILINK. In this mode, the modem will be defined as an LTE interface and will have its own router.
ATTENTION! If you doubt your actions, then it is better to refuse the procedure or entrust the procedure to familiar specialists. Follow the sequence strictly and do not skip steps. This procedure done repeatedly and 100% working on the stock Megafon firmware.
To switch to the HILINK firmware, you must first (!) Download the software:
- - this is an update of the dashboard (modem firmware) to version 3.5;
- Generate FLASH CODE for your modem IMEI;
- - HILINK firmware (not branded);
- - HILINK firmware web interface (not bended);
So let's get started:
1. Using the terminal, connect to the COM port of the modem and execute the unlock command:
at ^ nvwrex \u003d 8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0
at ^ nvwrex \u003d 8268, 0, 12, 1, 0, 0, 0, 2, 0, 0, 0, a, 0, 0, 0 |
2. Now we extract SIM card and SD.
3. We write down the IMEI of the modem. This may (most likely) be needed for the firmware. It can be taken from the device information in the operator software (usually the “Diagnostics” section).
4. We remove the operator's software (only the Megafon shell). This is necessary so that any autoruns do not occupy the ports of the modem during firmware. We leave the driver so that the modem is normally detected in the device manager.
5. Install dashboard 3.5. This is the firmware of the modem. It is not a software for modem control.
6. Install MobileBrServ. It does it quietly, but if you restart the service, it asks “reinstall?”.
7. Install non-branded firmware (E3372s-153TCPU ...). Flash Code can be requested here, which is calculated on the basis of IMEI (was calculated at the stage of preparation).
If everything went well, then we flash the web face (E3372sWEBUI ...).
If everything was done in order and carefully, then the modem will be determined as lAN card with the network 192.168.8.0/24, where the modem itself will be 192.168.8.1.
By connecting to the http://192.168.8.1/ modem, you can set up automatic connection to the network and use “only 4G”.
All you can stick the modem into Mikrotik. There it will show up as an LTE interface:
After the client is created (Apply / OK), it should receive an IP:
Next, we set up masquerading on this interface:
Well, that's all.
The modem will also be available on IP 192.168.8.1. You can also monitor SMS there.
None of the operators give a white / public IP, so setting up DDNS doesn't make sense. To have access to Mikrotik, you will have to connect it via PPTP (for example) to an external network through which to organize routing.
MegaFon 4G M150-2_2015 (Huawei E3372H) we refer to modems 2015 of the year.
Information given out dc-unlocker client
Found modem: MegaFon M150-2
Model: Unknown Huawei modem_
IMEI: 866119026303660
Serial NR: G4PDW15701077974
Firmware: 21.200.07.00.209
Compile date / time: Jun 10 2015 19:48:00
Hardware ver .: CL2E3372HM
Dashboard version: MGF_Dashboard_Win2.3.4_Mac2.3.4
SIM Lock status: Locked (Card Lock)
Wrong codes entered: 0 (unlock attempts left: 10)
Pay attention to: firmware version 21.180.09.00.143 , serial number: G4PDW15916 ***** 9 and have: 868757020*****5 ... Let's draw conclusions, to the modem shelf AlGO v4 arrived, i.e. MTS 829F with serial number on G4P can be unlocked.
As you know, after unsuccessful firmware the modem is often in the "eternal" Download mode... In the E3372h modem, this mode is indicated by frequent blinking of the green indicator.
1. The program for taking the modem out of boot mode
(Password on the archive: 12345 )
2.
Script to take the modem out of this mode
You need to run it like this:
exit_download COMx
where COMx is a port whose name in the Device Manager contains "PC UI Interface" - HUAWEI Mobile Connect - 3G PC UI Interface, FC - PC UI Interface.
For example,
exit_download COM12
(Password on the archive: 12345 )
1. Uninstall MobileBrServ or. If autorun from CD modem works, disable it.
2. If Huawei sticky drivers are not installed, install them (you can get them).
3. Connect the modem. It should only be identified as a CD-ROM (and a card reader if the modem is E3372).
4.
Run the program balong_sw_gateway.exeby setting the modem CD-ROM drive letter as a parameter. For example:
balong_sw_gateway g:
5. After the program switches over, three ports should appear.
The ports "HUAWEI Mobile Connect - 3G PC UI Interface" and "HUAWEI Mobile Connect - 3G Modem" are suitable for entering AT commands.
6. Flash the required firmware in the usual way.
In many cases, this method of restoration can replace the "needle method".
Download:
Unlock Megaphone M150-2 2015
2. Choosing a COM port
3. Detect
5. Back to seller" or " Back to shop"- do not forget to click it), after making the payment you will have a form for entering Hash (ENCDATA) and IMEI data and your EMAIL mail, carefully enter them or leave a request on the forum.
6. After receiving the code, insert it into the code request window and your modem will be unlocked.
ATTENTION!!! Who has the firmware of this version Megaphone M150-2 (21.200.07.01.209) when entering command AT ^ NVRDEX \u003d 50503,0,128 will give an error Error... To avoid an error, you need to reflash the modem. Instructions and required files for flashing you can find here FAQ_E3372h
If anyone uses a native dashboard from Megafon - Megafon Internet, then most likely, when you try to flash the modem, you will receive an error Error Code 11, the port cannot be opened. This is due to the fact that the COM ports of the modem are busy. Close the dashboard Megafon Internet, go to the task manager ( Ctrl + Shift + Esc) and end all processes starting with Megafon. Lastly, the service must be stopped Megafon Internet Service
For this, as an option, Start - Execute, type the command services.msc a window with all services will appear, find Megafon Internet Service, Change startup type to " Manually"and change the state to" Stopped". Also, in the service section you can get: P control panel - Administration - Services.
Unlock MTS 829F (Huawei E3372h)
To unlock MTS 829F (Huawei E3372h) you will need to do a few small steps:
2. Choosing a COM port Huawei Mobile Connect - 3G PC UI Interface
3. After selecting the desired COM port, click on Detect
5. Pay for the goods (if you pay through an external payment system (trading platform) and upon completion of payment you will see a button "
The MTS operator has updated the line of 4G modems, to replace MTS 824F, MTS 824FT (Huawei E3272) a new LTE modem has arrived from the manufacturer Huawei - MTS 827F (Huawei E3372)... Has all the same characteristics as the Huawei E3272. The main features of Huawei 4G modems are quality, stability, no overheating.
I will make a reservation that we have a modem for several hours and there are no noticeable differences from Huawei E3272, which are not striking. The case design has been slightly changed, but it's still the same matte plastic. At the moment, MTS 827F is sold only in black. According to unconfirmed information, in the near future the same model will appear with the operator Megafon.
One oddity was noticed, on the box of the purchased MTS 827F modem, except for the words MTS CONNECT and LTE 4G, there is no information about which model is inside. Until you open the box you will not know which modem you bought.
Modem MTS 827F from the regular series non-HILINK firmware version: E3372S-153 21.285.01.02.143... When you first connect to a computer, you will need to install the software from the modem version UTPS23.015.05.04.143_MAC23.015.05.04.143 it supports Windows 8 as well.
Like all modems from the MTS operator - MTS 827F blocked for using SIM cards from other operators. But the manufacturer Huawei leaves the opportunity unlock modem, by default 10 attempts are given to enter unlock code... More details on unlocking will be described below.
Not so long ago, Huawei E3372 Hilink appeared and the Beeline operator, the firmware version 22.286.53.01.161 WebUI version 16.100.05.02.161 ... How to unlock it is described in the article: Huawei E3372 unlocking from the Beeline operator
The operator Megafon has a new type of modem Huawei E3372h Megaphone М150-2 with firmware version: 21.200.07.00.209 , usually the box is marked MegaFon 4G M150-2_2015, to unlock such a modem, you need to read the following article:
Modem characteristics
Supported ranges:
GSM / EDGE / EVDO / LTE / FDD / TDD / UMTS
The speed of data reception by the modem is up to 100 Mbit / s,
Data transfer rate - up to 50 Mbps
Supported frequencies
GSM / GPRS / EDGE 850/900/1800/1900
UMTS / DC-HSPA + / WCDMA 900/2100
LTE 800/1800/2600
Additionally
Support microSD cards up to 32 GB
There is a connector for an external antenna.
OS:
Support OC Windows XP SP3, Windows Vista SP1 / SP2, Windows 7, Windows 8, Mac OS X 10.5, 10.6, 10.7, 10.8, Linux
physical characteristics
Dimensions (L × W × H): _______ mm,
Weight - __ g.
Unlock (unlock) Huawei E3372 (MTS 827F):
This model, like other models of the 2013-2014 release, has an algorithm for calculating the code 201. You can learn more about the list of such modems from the article:.
Let's consider one of the ways to unlock the Huawei E3372 modem, using the example of the MTS 827F.
Everything is very simple:
1. You purchase code for 200 rubles: Unlocking Huawei modems and routers (2014) Code.
2. Insert the SIM card of the "foreign" operator into the modem.
3. The software from the modem will automatically start and the following request will appear:
4. In the window you see the number of attempts and the field for entering the unlock code.
5. Enter the previously received code and click "OK"
6. On this unlock MTS 827F completed.
How to distinguish modem Huawei E3372H from Huawei E3372S on the example of MTS 827F?
1. Modem IMEI starts at 8661 ***********.
2. Serial number starts with G4P ***
3. Firmware version 21.180.01.00.143
4. If the above listed items correspond to your modem, this means that you need the unlock code by Algorithm V4.
Unlock Huawei E3372H (MTS 827F with Serial number on S / N G4P ***).
If you became the owner of a modem and want to unblock it, we have added a separate product specifically for this: Unlocking Huawei E3372H modem (MTS 827F s / n G4P **) .
Firmware for Huawei E3372 modem (МТС 827F, MegaFon Turbo M150-2):
Firmware Huawei E3372s-153 22.286.03.00.00 Universal
Firmware Huawei E3372s-153 21.285.99.01.00
Firmware Huawei E3372s-153 21.286.03.01.209 Megafon
Firmware Huawei E3372s-153 21.285.01.02.143 MTS
Firmware Huawei E3372s-153 22.286.53.01.161 Beeline Russia
Firmware Huawei E3272s-153 22.491.03.00.00 general
Firmware Huawei E3372h-153 21.180.01.00.00 general
Firmware Huawei E3372h-153 22.180.05.00.00 general
Firmware Huawei E3372h-210 21.110.99.03.00 general
Firmware Huawei E3372h-510 21.110.99.02.00 general
Firmware Huawei E3372h-607 21.110.99.02.00 general
Firmware Huawei E3370 (E3372h) 22.315.01.00.161 Beeline
Are you already bored without my iron posts? -and there will be them now.
So, I needed to use a usb modem for all sorts of different purposes. The first thing I wanted to do was to untie the device from the operator, the second - so that it was also convenient. I'll start slowly ...
To begin with, there are Stick and Hilink firmware on these huavei. Stick is simple network adapter... This is how the megaphone connection is realized. But the same MTS uses Hilink, and this is a full-fledged router. I will write an article about highlink, but later. For now, I will say that 3372 can be flashed with any firmware, and in the case of a highlink, you can also create a web face. So far, I have followed a simple path, i.e. to the communication salon of the megaphone for M150-2.
Unlock
Attention! Perform operations with the removed SIM card!
0. To begin with, we need drivers, which are for some reason kept silent on the same w3bsit3-dns.com, and newbies fuck around and whine, do it work ?!
1. Make sure that you really have a 3372H-153 modem
MTS has 827F, Megafon M150-2, Beeline E3372s / E3370. They all look something like this:
To do this (to make sure), launch the DC-Unlocker program. Before starting the DC Unlocker program, you need to close all the operator's software (and crash the Windows services that restart the manager daemons), since two programs cannot simultaneously use the ports of the modem. Otherwise, DC Unlocker will not detect the modem and it will be impossible to execute AT commands.
In the Options menu, select the Russian language (Russian).Next, in the program window, click the Magnifier icon (find and identify the modem).After the DC-Unlocker program finds and detects the modem, information about the modem will be displayed (IMEI of your modem, copy somewhere in text file, it will be needed to define Flash code). It will look something like this:
Found Applications port COM7
Found modem: MegaFon M150-2
Model: MegaFon M150-2
IMEI: 8661190ХХХХХХХХ
Serial no .: G4PDW158XXXXXXXX
Firmware version: 21.200.07.00.209
Compilation Date / Time: Jun 10 2015 19:48:00
Hardware ver. : CL2E3372HM
Dashboard version: MGF_Dashboard_Win2.3.4_Mac2.3.4
SIM lock status: Unlocked
Attempts to enter the code: 0 (unlock attempts left: 10)
After that, you can already enter (paste from the clipboard) AT commands. AT commands should be entered (inserted from the clipboard) after the text about information about the modem.
After the AT command is entered (pasted from the clipboard), press the Enter key.
After determining the modem, execute the AT command
AT ^ FHVER
If the result of this command is ^ FHVER: "E3372H-153 …….then you need this instruction
If the command result AT ^ FHVER will be ^ FHVER: "E3372S-153 ……., then this is a completely different story.
In addition, from the result of determining the modem by DS Unlocker, copy the IMEI of your modem somewhere in a text file, it will be needed to determine the Flash code.
Note, for those who are completely sure that he has a 3372h-153 modem and he knows the IMEI of his modem, point 1 may not do it.
2. Unlocking the modem
You need to execute four AT commands in DC Unlocker in turn.
Unlocking the modem
Enabling and Activating Console Port 5
AT ^ SETPORT \u003d "A1, A2; 10,12,16,5, A1, A2"
AT ^ NVWREX \u003d 33.0.4.2.0.0.0
AT ^ RESET
Note, if the modem was previously unlocked, then the AT command at ^ nvwrex \u003d 8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0 unlocking the modem can be skipped.
3. Updating the firmware. Download, close ALL OPERA SOFTWARE and run the program. At some point, you will need to enter a password. In fact, this is an unlock code and segment it by IMEI number. If the program gives error 16, close it, juggle the modem and bang the operator's software in case of inclinations. If everything ended successfully, the modem must also be distorted. Let's install a new dashboard version 3.5.
Internet access from the operator mobile communication Is an incredibly convenient service that allows you to use the network almost anywhere. However, many users are faced with various problems: poor Internet speed, malfunctions in the usb device, blocking for a specific operator. The last problem - the topic of our article. How to unlock the Megafon 4G m150 2 modem and other models?
Why do I need a jailbreak?
When buying an operator's device for Internet access, we always rely on a strong signal. But what to do if you find yourself in the area where exactly this operator cellular communication is absent? Not to buy the services of all operators?
The second reason is the desire to get cheaper access to the Internet. For example, you have a gadget from MTS, but in Beeline it turned out to be twice as cheap. In this case, too, you can do without unnecessary expenses.
Specialized resources on the Internet
To carry out the unlocking process, the user can use special services, of which in the vast world wide web lots of. For example, unlocking the 4G modem ZTE mf823 Megafon m100 3 (and many other models) is possible with a code. The latter, in turn, is personal for each individual IMEI (you can find it on the back cover of the modem).
The process is very simple:
- We go to the site.
- We select the device model from the proposed options, indicate its IMEI. Waiting for the code.
- We launch the MegaFon Internet program, and enter the code into the unlock window. The operation is complete.
The only and significant disadvantage is that such resources are not free of charge.
How to unlock 4G m100 4 device for free? To do this, you can use the forums specializing in these issues.
By submitting IMEI, model and firmware version to a special branch, the user can request an unlock code for free. By the way, this method is also effective for other models (m150 1, m100 3).
Solution for DC UNLOKEROM and Unlok code calculator problem
How to unlock Megafon 4G modem (Huawei e392)? To do this, you can use DC-Unlocker. Download.
- Launch DC Unloker, connect the usb device, click on the magnifier with the mouse. The program will display data about the model.
- After the data (below), you must enter a special AT command (for free unlocking). Command text: at ^ nvwrex \u003d 8268,0,12,1,0,0,0,2,0,0,0, a, 0,0,0.
If the model is suitable for free unlocking, the procedure is over, the device is unlocked.
If the method does not work, the method will be different, but paid. By registering on the site (via the link above), and having entered the required amount in euros, the site will provide you with a login and password. By entering them into the program window and clicking "Unblock", we will get the desired result.
How to unlock 4G modem Huawei e3272 Megaphone m100 4? Like other models, it can be unlocked for free. The extremely easy-to-use HUAWEI Unlock code calculator will help you with this:
- We launch the program, enter IMEI, get the codes.
