How to switch the stationary phone into tone mode. How to turn on the tone set on the phone

Often, when contacting the support service or call on the hotline, the subscriber is strongly proposed to go to the tone set. As a rule, this happens when trying to call the multichannel number, which assumes pressing the numbers on the phone's tube to confirm the selection. It is not even novice to understand similar nuances.

What is a tone phone mode

The telephone connection is a complex thing, but, at the same time, an insanely interesting. For this reason, before transfering the phone to the tone mode, it is worth understanding its essence, and consider what other options are available. Telecommunication technologies are far ahead every year, and now modern devices are supported only by the tone type. For devices released earlier, still have to transition between two:

impulse, involving the closure of the telephone line, in a special way, where each digit digit corresponds to the number of pulses.
a tonal using an analog signal to dial the desired combination of numbers.

A user who does not understand the subtleties of this topic will be able to distinguish these ways to enter numbers per ear. Recall the old disk phones: when scrolling the disk, you heard some clicks that differ depending on the number. Some devices released even 10-15 years ago, still have the ability to go to the pulse mode. The other method of input will give itself the difference in the height of the signal, which will depend on the key to be pressed. The advantage of tonal digital input over the pulse is primarily in the speed of the dialing and connections to the subscriber.

Tonal mode on a landline phone

Over time and the development of internal telephone networks, the refusal of the outdated pulse dialing looks quite logical. Multifunctional office telephones similar to those produced by Avaya firm, do not even have the possibility of changing the mode. This is understandable, because in large firms, the work boils constantly, and the speed of the dialing to the client or partner is not important.

Home devices will make it take care of how to enable tonal mode on the phone. For example, a list of characteristics of a wired model of a Panasonic apparatus says about the presence of both options. In some cases, it is not enough to transition between them to press the buttons, and you should contact a company providing communication services. It is mistaken to assume that absolutely all radiotelephones, unlike wired, have only a tone set. Voxtel Series SELECT devices support both ways to transfer the phone number.

Tonal Mode on Mobile Phone

Calls to long-distance hot lines where you have to listen to the answering machine for a long time, it is more profitable to carry out mobile. Most devices are equipped with only one input method, so the question is how to translate a cell phone into tone mode, does not occur. To switch to the internal line of the desired operator, you will need to press keys with certain numbers, which is possible only with the tone version. A person gaining a call center will hear a characteristic signal that means that the link is installed with the selected operator.

The pulsed connection on the mobile has never been, since this is a feature of telephone networks for stationary devices, and the modernization of Russian PBXs allowed to abandon this option forever. However, it may not be necessary to transition between input methods, but the inclusion of the desired type of connection turned off for any reason. Without the use of this function, some devices will not allow dial the number.

How to Translate Mobile Phone in Tonal Mode

If you answer this question generalizable and in relation to each gadget, but the answer here is one - in no way! By default, all phones and other options in them are not provided in tone-mode. However, from the rules there are exceptions: it is impossible to translate to another set, but you can simply turn off the existing tone. This instruction explains how to go to tone mode on a mobile touch control:

Dial the phone number.
Once the connection is established, call the on-screen keyboard.
Press the "asterisk" or "plus" key. For various gadget models, it may be necessary to hold these buttons for a while.

This algorithm will be effective for the owners of key-button models of phones. Here the situation is even somewhat simpler: you will not need to open the keyboard on the screen. When calling the number to the dialed number and having heard the request for the inclusion of tone input, which was probably turned off, you only need to press and hold one of the keys (as a rule it is a "asterisk", "grille" or "plus") to a characteristic signal.

Transfer of a landline phone to tone mode

The internal device of household communications devices, as well as telephone lines, determines the choice of method of changing modes. In most cases, this can be done without leaving the limits of an apartment or a private house. How to translate a phone into tone mode. Classically described in the following instructions:

Raise the phone phone if it is wired, or press the call key on the radiotelephone.
Secondly hold the button with an asterisk.
Try to press the number keys: if they make sounds, different by tonality, then everything is done correctly.

Another option is suitable only for some models:

Inspect the tube from all sides to the location of additional levers on it.
If you notice the switch with Latin letters P and T, meaning a pulse and tone set, then transfer the lever to T.
You can check by pressing the digital buttons.

Video: Tonal Mode

Many of us at least sometimes have to call multichannel phones on a variety of hot lines. From a mobile phone, it is easier to do this, but sometimes more expensive, because the operator begins to read the money from the beginning of the connection. First you listen to the message answering machine, which offers you to choose which specialist to connect, and then in some cases you have to spend more than one minute on the line, waiting for the operator's response. It is more profitable in this case to use the stationary apparatus, but in this case it is necessary to decide how to translate the phone in

Phone operating modes

There are two options for the phone number - pulse and tonal. The conversation is possible if you turn on the tone mode. And the default PBX is supported by a pulse set. Modern digital PBXs and more advanced telephone models are tonal. To determine how the default your phone is configured, you can, if you bring the tube to the ear and listen to the sounds in it during the number dialing:

The phone, by default, configured to the pulse mode, you will hear the characteristic clicks whose number corresponds to the dialed digit.
In the tonal mode, a characteristic beep sound in the dynamics.

If you heard the sounds described in the first case, for a call to the hotline you need to learn how to translate the phone into the tone mode. However, it is worth noting that the owners do this without buying additional equipment will not be able.

How to find instruction for a telephone

First of all, when we need to study a new function of any thing, we appeal to the instructions. It comes complete with any technique. In it you can find a lot of very useful tips, including about how to translate the phone into a tone mode. If the user's manual is lost together with the box or it was not initially, it is worth using the tips proposed further in our article.

The easiest way to translate the phone into tone mode

Sometimes on objective reasons it is impossible to find the user manual, or it can contain only a technical description of the model, and the functions are disclosed very poorly. In this case, use a simple and proven way to go to tone mode.

After you scored the number and connected you to the answering machine, click "Star" (*) and hold it for a couple of seconds. Usually it is enough in order to immediately go to the required mode. If the transition did not work, it is worth trying again. If the transition procedure is successful, any additional numbers can be entered. However, every time you call you will need to do this procedure.

Tonal mode and its features

Previously, other companies thought about the introduction of Panasonic specialists in their tonal regime devices. It is no secret that distribution of it everywhere remains only a matter of time, an increasing amount of PBXs use digital technologies, and multi-channel numbers are created for convenience. Before transfering the Panasonic phone to the tone mode, consider the device carefully. On some models you can see the "Tone" key or the "PULSE-TONE" switch. The switch must be installed in the "Tone" mode, and just click the key.

Modern radiotelephones of this brand are programmed by default on the tone set mode, and the optional settings are most often not needed. If the program is shot down, then using the instruction it is easy to fix it.

Master's answer:

Any number on the phone can be typed in one of two modes: a pulse or tonal. The pulse set is characteristic of stationary telephones with a disc cliff, the tonal is used in modern phone models.

In the settings of the stationary phone, the default pulse mode is used.

How to translate a phone into tone mode?

It can be determined by a characteristic cod in the tube during the set of keys. At the same time, dialing the figure 1 in the tube you can hear one crackling, with a number of numbers 2 - two, etc. With a tonal set, a beep is heard during pressing.

When contacting the service, where in the conversation process you need to press certain keys on the telephone for entering the appropriate menu item, the device with a pulse set will not fit. To enable the tone mode, you must click "*" and the desired key. Tonal mode upon subsequent call, the autoinformer will be in the disconnected state.

Any device from the pulse mode can be translated into a tone (check out the instructions for your phone model). For example, Siemens Gigaset telephone devices can be translated into a tone mode by the following combination: click on the call button, after which they call the function by typing "10". In the menu that appears, press the button "1".

If you have, for example, a stationary phone Voxtel, it can be translated into the tone mode in the following way: by selecting the "Programming" button, press the "* -2-2" combination. When the signal comes, click "*", after - the "Programming" button. In the Dext apparatus on the database, there is a dialing mode key.

In modern models of Panasonic telephone sets, a switch is provided (it is located on the side). To switch the machine to the dialing mode, you need to move the switch to the "Tone" position. If the outdated model, you need to go to the telephone menu, select the "Call Programming" item and select the "Tonal Mode Draw Mode" list. However, it should be noted that this item may not be in the menu. In this case, the explanations should be referred to the instructions for this telephone.

In ordinary urban phones there are two types of a set of numbers: the so-called pulse, known since the times of disk phones, and tonal.

Currently, it is considered that the pulse set (when the number of pulses, interrupts corresponds to a number of digit number) is a surler of the past. Now the tone set is still used (in which the number is recruited using special tonal parcels).

We translate the phone to the tone set mode - definition and two simple methods

However, quite often, telephone exchanges do not support the tone set.

Instructions for switching the phone from the tone mode to the pulse

Some phone models initially do not support the tone set mode. For example, disk telephones are created only for a pulse dialing. If you have a similar device, you can safely use it features.

Almost on all modern telephones there is a mode switch dialing. Usually it represents a moving switch-slider. Also, it always contains the switch "Pulse / Tone", which corresponds to the pulsed and tonal modes. Turn the switch to the "Pulse" position. So, your phone changed the dialing mode.

If this switch does not have a phone with your phone, the similar mode of switching modes will run the "*" key ("Star"), which is present on the numeric keypad of your telephone. Repeated pressing will return the phone into the previous number dial mode.

Sometimes after changing the mode, it is necessary to lower the tube on the lever and raise it again. That is, during a conversation to translate the device from one mode in another almost impossible on some models of phones.

If you have a DECT phone (that is, a telephone having a wireless radio tube), then the settings of the number settings are contained in the "base" settings, to which the tube is "tied". Access to the settings is possible directly from the tube of the telephone, or from the control buttons to the "base".

Read the instructions for your telephone. It will definitely contain information about setting up the device, including the translation into a tonal or pulse dialing mode. You can also find instructions on the manufacturer's website or sites created to help users.

How to translate the phone into tone mode what it is. Transition to tone on the phone

What is a tone phone mode

impulse, involving the closure of the telephone line, in a special way, where each digit digit corresponds to the number of pulses.
a tonal using an analog signal to dial the desired combination of numbers.

Tonal mode on a landline phone

Tonal Mode on Mobile Phone

A person gaining a call center will hear a characteristic signal that means that the link is installed with the selected operator.

How to Translate Mobile Phone in Tonal Mode

This instruction explains how to go to tone mode on a mobile touch control:

Dial the phone number.

Once the connection is established, call the on-screen keyboard.

Press the "asterisk" or "plus" key. For various gadget models, it may be necessary to hold these buttons for a while.

This algorithm will be effective for the owners of key-button models of phones. Here the situation is even somewhat simpler: you will not need to open the keyboard on the screen.

How to turn on the tone set on the phone?

When calling the number to the dialed number and having heard the request for the inclusion of tone input, which was probably turned off, you only need to press and hold one of the keys (as a rule it is a "asterisk", "grille" or "plus") to a characteristic signal.

Transfer of a landline phone to tone mode

Raise the phone phone if it is wired, or press the call key on the radiotelephone.

Secondly hold the button with an asterisk.

Try to press the number keys: if they make sounds, different by tonality, then everything is done correctly.

Another option is suitable only for some models:

Inspect the tube from all sides to the location of additional levers on it.

If you notice the switch with Latin letters P and T, meaning a pulse and tone set, then transfer the lever to T.

You can check by pressing the digital buttons.

Video: Tonal Mode

Technologies

What is the tonal mode of a stationary phone?

Stationary (wired, domestic) phones on their intended purpose are currently being used less often by giving way to mobile radio-based devices. Since the latter in most tariffs have no need to make a monthly subscription fee, the cost of their use is even lower than that of stationary fellows. At first glance it may seem that when using wired phones, no questions may occur, since the technology is old and studied. But this is true for the developer, and not for a simple user of such a phone.

For example, sometimes companies and banking institutions in their contact information indicate a free telephone number by calling for which many questions can be solved. Usually, on the side of the wire, the phone raises the answering machine, in the process of calling the subscriber, press certain numbers (twist disk). Alas, for many, the call ends for many, since the answering machine does not respond in any way to the actions with the phone, ignoring the press of the buttons. Why?

The reason is simple - there is a pulse and tone phone mode. Surely, everyone heard strange clicks or beeps, accompanying the press of numbers or a dialing dial. Cottages are a tone mode, and clicks - pulse. Consider how the number is occurring in old disk phones.

When you turn the disc to the desired distance and its automatic return to its original position, there is a closure of special electrical contacts: each closure generates a click-pulse, calculating their number, you can determine the number you can determine and, respectively, the number. This "counting" is engaged in the equipment at the station (PBX). Simple and effectively. In newer phones, contacts are replaced by a special pulse generator, which, by the way, can be translated into tone mode.

Subsequently, the pulse set was substituted with a more technological tonal (tone). In it, the number set is carried out not discharge, but by modulating alternating current with the desired frequency. Each digit (button) corresponds to its signal tone. Further, everything is similar: PBX perceives a combination of tones and converts them to the dialing phone number. The tone mode is more noise-protective (errors in the number set are now completely dependent on the care of the owner, and not from the network state), and also allows you to more quickly comply with the subscriber. All modern phones are tone, the pulse mode in them can be completely absent.

By the way, it is believed that the tone mode provides a higher sound quality.

How to translate the phone to the tone mode

This is true only half. To work in tone mode, it must be supported both telephone and PBX. An attempt to use a new phone on impulse PBX will not give any advantages (if, in general, the device will work). The stations calculated for the tone mode are digital (or mixed), in contrast to analog pulse. Hence the sound improvement.

The programmable pulse generator allows you to translate the phone to the tone mode and work both pulse and tone communication networks. Suppose the subscriber serves analog PBX. To transfer the phone to a pulse dial mode, you usually click and hold the "*" button (asterisk) for a few seconds. If it does not help, then turn the device and study the bottom cover - often there is a small toggle switch to select mode. Switching to the tone set is performed similarly.

Now let's go back to the example given at the beginning of the article. Owners of disk telephones connected to analog stations, communication with an answering machine that requires pressing any buttons may forget, since without additional equipment it is impossible. The output, of course, is - this is a special prefix that generates tone signals into the network, but about convenience will have to forget.

Technologies
CDMA phones - what is it? Mobile and Stationary CDMA Standard Phones

If you decipher the full abbreviation of these four letters (CDMA) in detail, then we will have the following words - Code Division Multiple Access. And even when we decipher this value, I translated into our understandable language, M ...

Law
What is a visa regime? Ukraine, Russia - Visa regime 2014

Today there are quite a lot of people who are somehow necessary to encounter the border crossing, so you have to issue a visa. It should be noted that some do not even know about such a thing as a "visa" ...

Arts and entertainment
What is a tonality in music. Song tonality. Major, Minor

Before analyzing a particular musical composition, the performer primarily draws attention to the tonality and key signs. After all, it depends not only to the right reading of notes, but also the holistic nature of the ...

Computers
What is a teleotype in a mobile phone?

Some users of phones, digging in the settings, meet the incomprehensible Abbreviation TTY or the phrase "Teletage Mode". Also in the string of the state of the smartphone may be present a characteristic value ...

Computers
What is Windows 7 secure mode?

The user system of the Microsoft operating system, which is not known what secure mode of Windows 7 can be called a lucky way. This software solution was so effective that it existed ...

Computers
What is "sleeping mode", which differences do?

Modern computers are equipped with a huge number of functions that are not always fully understood by the typical Windows user user. One of these options, which at first glance does not cause special questions ...

the beauty
What is a tonal cream for dry skin?

The tone cream is an indispensable part of the cosmetic arsenal of any woman who tries to choose the best cream to look impeccable. But buying the most expensive means, we do not always pay at ...

Technologies
What is HDR in the phone phone? High Dynamic Range - Expansion of the Dynamic Digital Snapshot Range

The desire of smartphone manufacturers make their products more attractive for buyers led to the fact that it is quite difficult to find a device in which the built-in digital camera would have had. Des ...

Technologies
What is DFU mode? iPad: How to activate DFU mode?

If you have any problems with software on the iPad, or it was necessary to erase all the information from the device - you know what update and restoration. In the same case ...

Technologies
What is a flexible screen? Advantages of the phone with a flexible screen

The appearance of a modern mobile phone firmly "sat down" in the heads of most people. If we are asked to imagine a modern device, we will certainly appear something like the last models ...

If you hit this page, you probably need to get an answer to the question how to install a tone set on your mobile phone?

How to enable your phone in tone mode

First let's figure it out for the function "Set in tone mode" And what is it needed for. In any user, the cellular is sooner or later there is a situation when you need:

get information on a specific operation from the service provider (operator);

call a hotline to the bank;

order Ringtone on the call.

In these and many other cases, a set of numbers in tone mode is required. Mobile devices for cellular communication are equipped with two modes - tonal and impulse. The pulse set is already outdated and practically not used. Its essence lies in the number of clicks on the button: one press - digit 1, two pressing - digit 2 and so on.

On modern mobile phones, the tone mode is set by default, and the pulse is generally absent, since it is slower and more uncomfortable.

How to turn on the tone set on the phone

It has already been said above that on modern devices the tone mode is set by default, but in the phones with a touch display, the keyboard is not always glowing. In addition, the operator may ask the interlocutor to translate the phone to the desired mode, which means that the setting was not saved in the phone.

Therefore, you need to know how to display the keyboard on the mobile screen. When you clicked the call button and heard the beep tube, press the soft key, which will turn on the on-screen keyboard. After that, press * or +, all - DTMF mode is active.

The touchscreen owner should pay attention to the options available in the challenge. Sometimes the transition to the tone mode is carried out through them. During the conversation or listening to information, press the number input and enter the desired combination of buttons.

This combination must be specified in the instructions for the device. If these recommendations do not help translate the device in the tone mode, it means that it is infected with the virus or there are problems with the firmware. In this case, the owner must contact the service center.

Subsequently, the pulse set was substituted with a more technological set of the number of the number is carried out not discharge, but by modulating alternating current with the desired frequency. Each digit (button) corresponds to its signal tone. Further, everything is similar: PBX perceives a combination of tones and converts them to the dialing phone number. The tone mode is more noise-protective (errors in the number set are now completely dependent on the care of the owner, and not from the network state), and also allows you to more quickly comply with the subscriber. All modern phones are tone, the pulse mode in them can be completely absent.

By the way, it is believed that the tone mode provides a higher sound quality. This is true only half. To work in tone mode, it must be supported both telephone and PBX. An attempt to use a new phone on impulse PBX will not give any advantages (if, in general, the device will work). The stations calculated for the tone mode are digital (or mixed), in contrast to analog pulse. Hence the sound improvement.

The programmable allows you to translate the phone to the tone mode and work both impulse and tone communication networks. Suppose the subscriber serves analog PBX. To transfer the phone to a pulse dial mode, you usually click and hold the "*" button (asterisk) for a few seconds. If it does not help, then turn the device and study the bottom cover - often there is a small toggle switch to select mode. Switching to the tone set is performed similarly.

Now let's go back to the example given at the beginning of the article. Owners connected to analog stations, about communication with an answering machine that requires pressing any buttons can forget, since without additional equipment it is impossible. The output, of course, is - this is a special prefix that generates tone signals into the network, but about convenience will have to forget.

There are cases when the subscriber is calling to various services or on a hot line and hears an autoresponder's proposal that advises to switch your phone to the tone mode. But not all users are aware of how to make this process. The article will give useful information to those people who do not know how to translate the phone into tone mode.

Set modes

The main modes of the dialing of the phone number are divided into pulse and tonal. These systems are the fruit of communication development. The earlier form of the functioning of the telephone approves the pulse mode. The dialing of the number with it is carried out by interrupting a line with a certain list of sounds. Any subscriber will surely remember their calls from an ordinary phone to another city by a long-distance line. Tonal mode is a later invention and it appeared relatively recently. Its main difference from the impulse is that the selected sound is intended for each figure. Attention should be paid to the fact that all modern telephone models are available taking into account the use of this feature. Pulse mode for such models went to the distant past. But, despite such an innovative approach, all the same phones with classical possibilities are popular to this day. Therefore, if you need a translation into a tone mode, you should clarify whether its menu assumes its machine.

Check

In order to find out if the required function is enabled, take the phone tube and press any key. You must determine what kind of sounds are distributed from your device. If the short beeps are heard, this suggests that your phone is switched to the tone mode system. If you can recognize sounds similar to clicks, then the device is undoubtedly working in a pulse mode. The last option limits a number of functions. How to translate the phone to the tone mode you need, discuss further.

Process

Click on your device the "*" button is the most simplified way to switch your device into tone mode. This method is effective only if a similar function is provided in the menu. Not every model of the phone involves a simple button pressing. Hold and do not let go of the "*" key for a few seconds or "#". The word "TONE" or "T" should appear on the board of your phone. If the display does not show anything, you should again listen to the sounds published by the tube by pressing the buttons. Some models are equipped with special keys "T" or "P", which are located on the housing. They are created to translate the radiotelephone with a pulsed mode to the tone.

There are other individual actions for such a setup. They are characteristic of some models. The switching method can perform a combination of "*" and "-" buttons or "-", "*", "-".

Nothing came up

If none of the above methods of switching on the phone's tone mode are not valid, it is recommended to refer to a detailed study of the menu of your device. Many models are subject to translation by means of it. Enter the settings and refer to the "Switch between the modes" option. Select the method you need and confirm your action.

We dealt with the concept of a tonal regime, but finally, you should tell a little more about the pulse. First of all, thereby work the phone with a disk dialer. The pulse mode is a method of a set, with which the numbers are transmitted to the station by step by step closure, and after - opening the selected telephone line.

What is the tonal mode of a stationary phone?

Do you know how to translate the phone to the tone mode?

Phone operating modes

There are two options for the phone number - pulse and tonal. The conversation on the multichannel number is possible if you turn on the tone mode. Old phones and PBX by default support pulse set. Modern digital PBXs and more advanced telephone models are tonal. To determine how the default your phone is configured, you can, if you bring the tube to the ear and listen to the sounds in it during the number dialing:

The phone, by default, configured to the pulse mode, you will hear the characteristic clicks whose number corresponds to the dialed digit.
In the tonal mode, a characteristic beep sound in the dynamics.

If you heard the sounds described in the first case, for a call to the hotline you need to learn how to translate the phone into the tone mode. However, it is worth noting that the owners of disk phones do this without buying additional equipment will not be able.

How to find instruction for a telephone

The easiest way to translate the phone into tone mode

Panasonic tone mode and its features

What does it mean to translate a phone into tone mode?

earlier on stationary phones and now there are 2 dialing modes This is a pulse and tonal

at first, the pulse mode appeared. This is 1 click digit 1 2 click digit 2 TTTP ...

then later appeared the tone set mode it is faster than pulsed in tone mode. It is much faster to dial the numbers and various telephone operator services are supported only in the tone set in the pulse are not supported.

if you have a landline telephone device, then there are usually 2 dialing modes that are tonal and pulsed

many old PBXs, GTS do not support the tone mode, only pulse more than 10 years ago did not support exactly village, rustic PBX

those. It is already moving into the last translation from the pulse set in the tone

for example, if the PBX subscriber is connected to the station in the pulse mode, the number of the number in the tone set, it can not dial the number and vice versa

Sad Roger.

The usual set is a pulse. It remained since the times of disk apparatuses, when each digit corresponded to its number of pulses.

There are no longer in modern disks, but they have compatibility with old networks, that is, by default, they also send pulses when the pulses are sent, and not tonal signals. To transfer to the tone mode (so that, for example, select the menu options for all sorts of services, call cards, etc.) or move a special switch, if there is, or dial the stars *.

In the West, the pulse set is no longer left, there the number of the number immediately goes in the tonal mode. When each digit corresponds to a signal from two specific frequencies.

Mikhail Belodedov

The pulse set of the phone number is the first thing that came to the telecommunication for the change of "laryrs on the switch". The dialer disk, rotating (reverse), briefly breaks the telephone line several times. One break - digit 1, two - digit 2, etc. Simply and easily. Minimum complex equipment. Accordingly, automatic PBXs are needed, decrypting these short-term interrupts and establish the necessary compound. These PBXs received very large distribution - this island-step PBX. The main disadvantage of the pulse set is a significant duration.

With the development of electronics in the arena, a tone (or tonal) set came out. No lines. The line passes a special signal that PBX interprets as a digit of the phone number. As a signal, a pair of non-optical frequencies is used - from here the name Dual Tone Multi-Frequency (DTMF). Total frequencies 8 - two sets of software 4. It is they who hear in the handset when the number is set. Modern PBXs use exactly a tone set as the main regime - because it is much faster. However, the ability to use the old, pulse set is almost always left so that you can use old telephones. On modern devices, as a rule, provide both mode dialing modes and make a special switch - either physical or software.

Matvey628.

More recently, absolutely all telephones were analog, that is, the number of the number was made by a serial set of numbers with a rotating disk. However, with the advent of the first digital switches and telephone sets, the set of numbers in the form of analog signals lost all meaning.

However, a huge number of analog telephones did not allow you to quickly go to a new format. Therefore, in most digital telephones, switching function from one mode to another has been provided. Tonal mode was designed Just for digital devices and switches and differed in that the numbers of the numbers differed not by the number of clicks when the set, but the tone height, individual for each number. This is what is meant when it says that the phone needs translate into tone mode.

Tonal mode, as a rule, is needed to connect to the atrightened number without the help of the operator. Most often for changed and twin mode, you need to click "*", after that you can enter the intense number of the subscriber.

How to translate a phone into tone mode?

Captain obvious

If the phone is equipped with two systems, the number is tonal and pulsed, and the default operates in a pulse mode, two options for switching modes are possible. One of them is a mechanical, microswitch on the body of the phone with marks T and I.

The second option is simpler - enough when the tube is raised to press the button with an asterisk.

There are still models of phones in which the switching of the set modes is carried out through the phone menu - here you will have to read the instructions for this phone model.

Matvey628.

The question, for many young people it does not make sense at all, because they only dealt with mobile phones in which this mode is set by default.

As for the older people, they remember even the analog phones, which had a spinning disk for a dialing. The digital phones appeared later had two dialing modes: Traditional and tonal. During the tonal set, the sounds of different heights, each of which correspond to one digit. To translate a landline phone into a tone mode You need to either press the asterisk *, or translate the tone switch to the "tonal" mode. The mode switch is usually in the rear of the telephone, where the wire is connected.

Zolotynka.

Most wired phones, as well as many outdated models, are indeed translated into the tone mode with a runner, which is usually located at the bottom of the telephone, or on its back wall. This function is indicated by Tone / T and PULSE / P. Move the slider to the T and the phone will work in tone mode.

Not everything is so simple for new models of phones. The desired function can be "picked up" somewhere in the phone menu and to use it and translate the phone to the tone mode, you should carefully examine the instructions. For different models, the setting can differ significantly.

Pistolet.

By default, the tone mode is already on the phone. All depends on the firmware of the phone, there are a lot of touch and simple. In the process of the conversation - this is when the connection has already gone, press * (asterisk) and just wait the change of mode. This action is suitable for almost all telephone sets.

Dolfanika

Some early mobile phone models are still offered to translate the phone into tone mode. Other mobile devices are already delivered in tone mode.

if you need to independently change the mode, then press the asterisk and hold.

D y m k a

You can switch on the phone body using special buttons, but it is usually enough to hold the asterisk. But I always had to do it through the phone settings, in the "Sounds tab" - everything is simple and understandable there, it is enough to put / remove a tick or select the desired mode and that's it. Therefore, there is nothing difficult in this, the main thing is to select the most suitable and convenient way.

Hunt Nick

The phone has two modes - tone and impulse. In pulse mode, when you press the buttons, clicks will be heard. If a tonal mode is selected on the phone, short sound signals will be heard when pressed. Most phones have a simple way to change one mode to another. You just need to unlock the phone and hold the asterisk until the mode is changed.

To begin, it is necessary to determine which mode the phone works in a tonal or pulse.

If, after pressing the button, you can hear clicks, then the pulse mode, if short signals are heard - then the tone mode.

Click on your phone the button " * "(asterisk) - this method of translation into tone regime is suitable for most devices.

Afanasiy44.

At work for me to translate the phone into the tone mode, just press the button *, below it and the inscription is made in English tone.

And on the home phone to transfer to the tone mode there is a key on the back of the apparatus.

Chipmunk.

Because there is a lot of calls during the day. And very often to get through to the operators through the answering machine menu. You have to translate the phone into tone mode. To do this, usually click on the button with an asterisk - *

To translate home phone into tone mode needed with a raised tube to press the star. Some phone models need to be translated through the menu. And the mobile phone does not need to translate - it is already in the tonal mode.

How to translate the phone to the tone mode. Phone Phikips. On "*" pressed nothing.

Pavel Ronzhin

Instruction
1

Determine what mode does your device, a tonal or impulse work. To do this, listen to what sounds make your phone when dialing. If, after pressing the number, clicks, it means that the pulse mode, and if the short tone signals are tone.
2

By defining the mode of operation of the device, translate the phone from the pulse mode into a tone one of the three ways.
3

Click on your telephone button "*" - this is the easiest way to transfer the device into a tone mode, provided that your phone is translated in this way.
4

Find on your phone the "P" and "T" buttons, they can be on the side of the device, or below. If there are such buttons, it means that the phone is translated into tone mode with their help. Press the "T" button to go to the desired mode.
5

If both methods regarding your phone are invalid, refer to the instructions applied to the device. Some models of devices are transferred to the tone mode by completely different keys.