There are several solutions to this problem, here are some of them:
Can button using charging
Can device
Can Assistive Touch function
Turning off the iPhone when the button is not working using the charger
1. Must be connected to a USB charging cable. The cable must be native, supplied with the phone. Next, the device is connected to the USB port of the computer.
2. Then you should wait until the screen lights up. If the battery of the iPhone is over, then you need to wait a little longer - up to several minutes. This time can be calculated in ten minutes.
3. After the screen lights up, you need to move the slider to unlock the iPhone. It is recommended that Assistive Touch be turned on before replacing the phone. (If there is a lock code, you must enter it before gaining access to the device)
How to restart iPhone without a button
1. First, go to the "Settings" application, then click "General" and "Universal access".
2. The page with "universal access" in the settings scrolls to the end, to the section "Physiology and Motor", where you should select the item "Assistive Touch".
3. Opposite "Assistive Touch" move the slider to the "on" position. A transparent button should appear on the screen.
4. Press the button (gesture "tap"). The available Assistive Touch options should then appear in the screen window.
How to turn off iPhone with Assistive Touch
1. On the icon, you need to “tap” the menu of the Assistive Touch function.
2. In the menu, “tap” the “device” icon, then on the “screen lock” long “tap” until the “cancel” and “turn off” buttons appear.
3. Then on the “turn off” button, “swipe-right” is done, after that the phone starts to turn off.
4. To turn on with a faulty button, the iPhone is connected to the computer with a USB cable.
Sometimes it happens that the iPhone or iPad freezes. One solution to this problem is to restart the gadget. However, in some cases, it happens that the device does not respond either to touching the screen or to mechanical control buttons. What to do in this case, we will tell further.
First of all, I would like to consider the most standard situation in which no special problems arise. If the iPhone responds to screen touches and key presses, restart it in the usual way:
1. Press and hold the Power button.
2. Swipe on the big button from left to right.
3. After turning off the smartphone completely, press the power button once.
Force restart iPhone
As mentioned above, sometimes there are situations when the iPhone freezes “tightly” and stops responding to any actions. However, the Cupertino team provided a mechanism that would allow the device to be taken out of this state.
1. Simultaneously hold down the Power and Home buttons. They must be held until the iPhone screen turns off. This may take up to 10 seconds.
2. After you release the buttons, the Apple logo should appear on the screen.
3. If it doesn't, press the Power button once.
Restart iPhone without using mechanical buttons
The iOS system provides the ability to control iPhone without the help of mechanical buttons. This is done with the expectation that sooner or later the keys may fail, and the user will have to control the devices only with the help of a sensor. Therefore, the system has a special function Assistive Touch, which shifts the actions of mechanical keys to gestures.
Before considering the reboot method itself using just a sensor, you will have to enable the function itself.
1. Go to the menu Settings - General.
2. In the Accessibility tab, select Assistive Touch, which is located in the Interaction category.
3. Activate the function, then a transparent button will appear on the screen.
4. After tapping on this button, a panel with additional features will open.
1. Tap on the transparent touch button.
2. Tap on Device.
3. Place and hold your finger on the Screen lock that appears until Turn Off appears.
4. Swipe from left to right on the red button to turn off.
Turning on the device will not be easy without using the mechanical Power button. To do this, you will have to connect your smartphone or tablet to your computer via USB, in which case the gadget will start automatically.
Apple products are perfection. The famous iPhones practically do not bug, even with intensive and long use. However, nevertheless, every smartphone owner has a situation where a reboot of the device is required. And sometimes restarting the system seems unrealistic: either the central button is broken, or the sensor does not respond to commands. Usually, it is after a reboot that the smartphone returns to its working capacity, so you should do your best to turn the device off and on. This article will outline all the ways to do this. There are 3 reboot methods in total.
If you bought an iPhone recently, or used it all the time carefully and in compliance with the operating requirements, most likely it is fully functional for you: the Power and Home buttons work, the sensor responds to commands. This is the normal operating mode of the device.
How to restart iPhone in normal mode?
Force restart iPhone
The smartphone is not always in a normal state. If it is overloaded or you have an “old man”, periodic freezes may occur when the gadget does not respond to anything. Apple developers have also provided for such a case, so you can restart your iPhone even in difficult conditions:
Such a system reboot is called a forced reboot, and is suitable for restarting both iPhone and iPad. A forced restart of the system is not very useful for the health of the device, so if you can turn off / turn on the smartphone in another way, try to do without this reboot.
The last method is suitable for devices that work in normal mode, and only have some mechanical damage - their buttons do not work. It is important to understand that without the participation of the sensor, you will not be able to reboot the system in the manner described below.
How to restart iPhone without a button?
Apple foresaw all possible circumstances, and warned of problems that could arise if the buttons on the device suddenly stopped working. iPhone owners can get by with just one working display. The “Assistive Touch” function, a substitute for push-button control, will help them with this. This touch button replacement looks like a transparent circle on your screen. When pressed in the circle, a number of functions appear that previously could only be activated using buttons.Activating Assistive Touch:
Turn off iPhone with Assitive Touch
After reading this manual, you will be able to fully use the device without using the iPhone buttons. And most importantly - you can turn off your smartphone without pressing "Power".
A few words in conclusion
The above describes all the possible ways to turn off and activate an Apple device. If possible, use only the first and third reboot methods. Force restart the device only if the phone is completely frozen.Sometimes even high-quality Apple devices fail - they freeze, do not respond to button presses, or suddenly the battery is discharged at a cosmic speed. But curing such problems is usually not difficult - we will tell you in detail how to restart your iPhone. Let's analyze several ways - normal, forced, and what to do if the button does not work.
If your iPad, iPhone 5s, or other model freezes, the first thing Apple recommends is trying a standard restart. It will help restart iOS and all running applications, free up space in RAM. A normal reboot is turning the gadget off and on using the physical buttons, it is also suitable if the sensor does not work.
How to restart iPhone 5s or other Apple mobile device:
- Press and hold the power off key located on the top or right side of the device.
- A slider will appear on the top of the display - pull it in the direction of the arrow to turn off the gadget.
- Wait a few seconds until the screen turns off completely. Do not touch the smartphone while the slider is spinning on the display - this is the completion of system processes.
- Press the power button again and hold until the Apple logo appears on the screen.
When the device is rebooted, in most cases the problem with its operation also disappears. If a simple restart did not help and the iPhone freezes again, try a hard reboot of the system.
Forced
Hard force restarting your iPhone is only recommended as a last resort. If the iPhone suddenly freezes so much that it does not respond to the shutdown button at all, try this method. How to restart iPad or iPhone:
- On iPhone 7 and 7+: hold down the power button and the volume down key for 10 seconds until the gadget starts to turn off.
- On iPhone 6, 6s, and earlier: Hold down the Lock and Home keys.
This method is suitable if the iPad freezes and does not turn off: hold down the shutdown and "Home" keys on the tablet. So you will be able to reboot the frozen iOS and return the device to a working state.
If even after a hard restart, send it to recharge for at least an hour. If recharging does not help or the device freezes during the restart, you need to reset and restore via iTunes. Read more about this in our separate.
Without buttons
If the mechanical buttons are out of order, you can still restart the Apple gadget. How to restart an iPhone if it freezes and the mechanical buttons do not work:
- In the main settings, go to "Universal access".
- Scroll to the subsection "Physiology and motor skills", select the sub-item Assistive Touch in it.
- Enable this function, a translucent round button will appear in the center of the display.
- Click on it, select the "Device" section.
- Put your finger on the “Screen Lock” icon, hold until the “Turn off” icon appears.
- To turn on the gadget, connect it to the computer with a cable.
Turning off an iPhone without a button in iOS version 11 will be even easier. In the settings menu "Basic" at the very bottom, the item "Turn off" appeared - click on it, the usual slider for turning off the device will appear. But owners of iPhone 4 and 4s will not be able to use this method, they cannot install the latest iOS on their gadgets.
Conclusion
We figured out how to turn off the iPhone. Now you know what to do with a freeze - from a simple reboot to a hard one, including the method with broken mechanical buttons. It is not difficult to restart the device, besides, the procedure helps to get rid of many system failures without a trace.
Smartphones, like any computer, are prone to software failures. Whether iOS or Android, Windows phone or BADA, any mobile operating system is prone to sudden failure. This article will discuss iOs-based phones, we will try to answer the question in detail how to properly restart an iPhone of any model. There are many reasons for software failure, ranging from a memory cache error or a frozen application to hardware failures of individual modules. Hardware glitches start after drowning the phone or a decent hit on a hard surface.
Rebooting the iphone 6 helps to solve many problems, in some cases temporarily, but most often one restart of the phone is enough to continue stable operation for many months. There are several ways to restart iphone 5s, today we will talk about each of them separately. We will give valuable advice and, as always, we will attach a video instruction on how to restart an iPhone if none of the buttons work.
Ways to restart iPhone
There are several effective ways to restart an Apple phone, each of them is safe for the device, and can be used several times a day. Is it possible to reboot an iPhone without a button? Certainly! how to do it, read below and watch the video.
- Regular way, using the power button
- If the button on the case does not work
- If the sensor does not work
- Software reboot option
- With Assistive Touch
Benefits of rebooting your phone
The benefits are undeniable, like any computer, a modern smartphone is capable of processing huge amounts of data. The more information, the faster the cache of the device becomes clogged, which leads to software crashes, freezes and subsequent problems for the user. Here is a small list of problems that harm users and prevent them from fully using the iPhone.
- Getting rid of iOs glitches
- We eliminate the braking of the system as a whole
- Getting rid of graphic artifacts on the screen
- Killing a stuck application
- Reset the cache memory of the smartphone;
- Complete hardware restart.
- Solving many other iPhone 5 problems
Rather, this is not even a way to reboot, but simply a regular function of turning the iPhone on and off. Since the beginning of the entire line of iPhone models, 2, 3, 4, 4S, etc., the on / off button of the device has been located on the top edge of the device. The power button was moved from the top to the right, starting with the new models 6, 6 plus, 7, 7 plus. Judging by the rumors, for iPhone 8, the power key will also be located on the right side.
How to completely reset an iPhone using the normal power on option? Everything is simple and reliable. We press the power button and hold it for 10 seconds, until the slider appears with the inscription Turn off, now swipe, the phone turns off. After a couple of minutes, turning on the gadget, we get a cleared cache, most glitches will never again make themselves felt. The method works if iOs does not freeze tightly, and all applications work in normal mode. But there are situations when a hung device does not respond to pressing hardware buttons, then a “hard reboot” will come to the rescue.
How to restart iPhone when it's stuck so much that it doesn't respond to pressing the lock button? Then the so-called "hard reset" will come to the aid of the user. With its help, it is really possible to restart the device in case of any software and hardware error. This method works on all Apple technology from phones to tablets of all models and configurations.
Rebooting iphone 5 in hard reset mode is simple, hold down the lock and "Home" keys at the same time, wait 10-15 seconds, the phone should go into reboot, if this does not happen, wait longer. In any case, this method will help, sometimes you just need to hold the buttons longer. The hard way will help if the sensor does not work, but is unlikely to restore its performance if it is not a software glitch.
Video instruction on how to restart an iPhone 5s if a regular restart does not work, but it freezes.
Any technique breaks down, expensive iPhones are no exception. Falling, mechanical damage to the case, it is these factors that lead to damage to the device, which makes it difficult to reboot it. Most often, the hardware lock button fails, it is also the power button of the phone. Without it, it is impossible to turn on - turn off the phone and reboot the device, if necessary. But even without such a valuable part of the iPhone, it is quite possible to restart the device using software, although not everything is so simple.
Let's figure out how to restart an iPhone without the much-needed lock screen button? There are four main ways.
With Assistive Touch
- Go to "Settings - General - Accessibility"
- Find and turn on the "Assistive Touch" function
- Press the soft button that appears on the screen;
- Select the "Device" item;
- In the menu that opens, press and hold the "Lock screen" item;
- We turn off the phone.
- Go to Settings - General - Accessibility.
- Click on Bold Text.
- Agree to reboot
Everything, the problem of how to restart iphone 5 without hardware buttons is solved. After downloading, go to the settings and remove the "Bold Text", the phone will reboot again and the system font will return to its original state.
By resetting the wireless settings
- "Settings - General - Reset".
- Select "Reset network settings"
- We agree to reboot.
It must be remembered that this method works, but it deletes all data about networks, resets all network settings, including passwords for wi-fi and VPN connections, so you need to be more careful.
Wait for the battery to run out
This option, how to restart an iPhone without hardware buttons, is suitable for extreme people or real lazy people. You don’t need to do anything, we sit and wait for the phone’s battery to run out and it turns off. To make the process go faster, you can turn on a movie or any video, for example, from YouTube. This will drain the battery in a couple of hours, after which it will turn off, and you just have to connect the charger. By default, the iPhone turns on when you connect the charger, so the problem will be solved.
