The interior of the car should have a minimum of devices and devices that will make driving more convenient, but at the same time will not become an obstacle. Modern gadgets in the form of GPS navigators, tablets and phones are perceived by experienced drivers as full-fledged assistants in the car. But even if it is not planned to use the same smartphone as a means of navigation or informing about traffic jams, it is quite possible to entrust it with performing primary functions right in the process of movement. But for this it is important to choose a mount for the phone in the car, which will save you from problems during the operation of the device. The market offers many options for such retainers, and the overview below will help you determine the appropriate option for this device.
Suction cups for phones
This is the simplest way to fix the device, which allows you to fix the gadget to the glass at no special cost. But for an affordable cost and a simple operating principle, the owner of such a device will have to pay with certain troubles. In particular, the glass mount for a phone in a car in the form of a regular suction cup is not reliable. That is, when driving over bumps, the structure is more likely to fall regularly, which is in no way allowed in the operation of an expensive mobile device.
And yet, for infrequent use or as a spare retainer, such an option may well be in service. An ordinary suction cup with a niche for a mobile device costs no more than 200 rubles, and to install it, you practically don't have to fiddle with setting up complex fixing structures. This applies to universal options for suction accessories, but you can also find on the market a special mount for a phone in a car from this category, which will be devoid of the disadvantages of conventional silicone.
Fixing clothespins
These devices are also easy to install and, most importantly, do not leave marks on the glass. Unlike a simple suction cup, a clothespin has a larger size, which makes it difficult to consider it as a convenient and reliable fastener. But since it is in some way a basic bracket for the phone, the driver will be able to adjust the position of the gadget to suit his needs - turn, twist, lower, etc. Again, there are different versions of the clothespin and it is very important to pay attention to the density of the clips and the quality of the plastic , which is most often used in the production of this accessory. Poor assembly, for example, can cause the structure to rumble when moving, which will not have the best effect on the control of the machine.
Kioki brand retainers
It is worth turning to specialized products designed to mount telephones in the car interior after at least the approximate requirements for this accessory have been evaluated. For unpretentious users, we recommend inexpensive Chinese accessories. Perhaps it is in one of these lines that a suitable option will be found. For example, the manufacturer Kioki produces a car holder in the form of a tape, the cost of which is about 100 rubles. We can say that the mount is from the category of disposable, but it can provide basic support to the device in extreme cases. True, the fixation is realized only from the side - there is no lower belay.
Koto Brand Holders
Another representative of the Chinese market, but this time we are talking about a more serious accessory, the cost of which is about 500 rubles. The company produces devices that fit both phones and smartphones with communicators, regardless of their size. The structure is formed by a suction cup on the glass and a disc with an adhesive layer, thanks to which you can mount the phone to the car dashboard without additional devices. The creation of a vacuum is provided by a screw mechanism. As for the controls, the user gets the ability to adjust the structure to the working width, and can also adjust the angles of rotation.
Fasteners from Mini Handy-Telefonhalter
These are German products manufactured by Richter. Fasteners of this brand also suggest the possibility of fixing both on a glass surface and on a dashboard - the kit contains a special addition. The features of the phone mount in the Richter car include a wide range of adjusting positions, as well as thoughtfulness in the details. Perhaps, for long-term operation of an expensive device while the car is moving, this option is best suited. The developers have thought over a special system of pads for the phone, which allows you to keep the case carefully regardless of vibrations. At the same time, the flexible bracket makes it possible to install the latch in almost any position.
Bracketron fasteners
An expensive, but durable and reliable way to fix any portable gadget. The Chinese firm Bracketron decided to combine two different approaches to the manufacture of retainers. The base was taken as a phone mount in the car in the form of a stand. This is a platform that takes a horizontal position and is able to contain even a small tablet in its niche, while maintaining reliability. The advantages of this holder include a special coating that does not leave traces.
The second part of the fastener is formed by the platform on which the suction cup holder is located. It is desirable to carry out direct fixation on the torpedo. Unfortunately, the car phone mount can only be installed on this part. This option is suitable in the case of regular use of gadgets in the car. In this case, you can fix not only ordinary-sized phones, but also larger equipment - navigators, tablets, etc.
JIO brand holders
Under the JIO brand, inexpensive, but high-quality and functional holders with a solid element base are released. Most devices are also equipped with Velcro, have a massive platform and are mounted on the dashboard. As the manufacturer notes, already standard models from the middle level are able to hold gadgets of about 500 grams. In this case, the guiding elements allow you to adjust the position of the object in different ways. This is not only a holder for a smartphone, but also a means of attachment for the same navigator or tablet. As for the price tag, you can buy a junior model for an average of 1,000 rubles. More solid, attractive and functional accessories are estimated at 1,500-2,000 rubles. In addition to the high cost, there is another drawback of this brand of fasteners - they are not universal and require initial verification of the installation capabilities with the characteristics of the fasteners.
What is the difference between a magnetic holder?
A feature of such devices is the principle of operation - holding is carried out by means of magnets. Most often, a neodymium magnet is used as an active element, which has a long service life and does not have negative toxic effects on the driver and passengers. You can fix the device on the dashboard, air duct and even the steering column. There are models for both smartphones and tablets - in both cases, the accessory copes with the weight. In its constructional basis, the magnetic holder contains a small metal support. It can be fixed with tape - the magnet, in turn, provides basic support.
How do I choose an option for mini devices?
Manufacturers strive to make models of fasteners for small gadgets small, but functional. Usually, the fixing section of the device itself is a sliding mechanism on a bracket with hinges. In any case, such a performance is considered optimal. It is also worth paying attention to the quality of the materials. It is desirable that the places of direct contact with the device are rubberized. If you are choosing a holder for a smartphone with the ability to rotate, then it is better to turn to the multifunctional options. These can be devices with suction cups, as well as platform clamps for the dashboard.
How to choose fasteners for large gadgets?
The reliability of the fastener itself and the possibility of placing gadgets in its niche are the main parameters for choosing models of this type. If we are talking about massive tablets and smartphones, then installation on the dashboard would be preferable. This is a safe and convenient way to place the holder. As for the materials of execution, you should focus on metal - steel or aluminum. It should be noted that the car holder for large devices may have limitations in adjustments. Tilt angles and rotations are usually calculated before installation. Of course, such devices are not cheap - about 1,500 rubles. And it is also important to note that for a massive gadget, only a retainer of the same size is suitable, which will probably cover part of the review. You can alternatively choose options with glass mounting, but they have even more disadvantages.
Conclusion
In addition to the functionality and reliability of the fasteners, it will be useful to initially take into account the aesthetic merits of a particular model. Still, the salons of modern cars themselves demonstrate a fairly high level of design performance. Accordingly, accessories must be selected for a specific interior. In terms of colors, a variety of traditional neutral shades can be noted, as well as special colorful versions of the retainers. However, overly bright phone mounts can distract from the road. In terms of materials, the choice is not particularly rich. It's either plastic or metal. Sometimes there are models interspersed with wood and glass elements, but this is a rarity and, as a rule, representatives of exclusive series. Another thing is the presence of rubber pads and liners, which keep the outer coating of the case intact. It is also worth considering the possibilities for using fasteners for other gadgets. For example, dash-mountable knob stands are fine for a small phone or a large tablet.
A modern person never leaves a smartphone anywhere and never, even in a car, when all attention should be focused on the road. To enhance the safety of each of us and improve comfort, devices such as car holders have been invented.
They perform several functions at once: they provide reliable fastening of the smartphone in a certain place so that it does not slip on different surfaces in the car and does not get lost in the back seat, they make driving and smartphone control much easier and more convenient, especially if you use Hands Free. And if you want to use your smartphone as a navigator, then you simply cannot do without such a holder. If you are starting to think about purchasing a much-needed gadget, then before the very purchase it would be good to clearly imagine what the most convenient holder should be for you.There are smartphone holders designed for a specific model. They are usually equipped with a charger and several other special functions, which make it easier to use the gadget while driving. But such devices are also more expensive than universal ones. Purchasing them is justified only if you are not going to change smartphones often, but to stay with the chosen model for at least a couple of years.
That is why, in most cases, it will be more practical to buy a universal holder, which can then be converted in a matter of seconds to use a completely different gadget. The phone can be attached to them in different ways:
- using magnets, but this is not the best way of fastening, since the smartphone can fall every now and then, although this method of fastening the smartphone is now the most popular;
- with a cone clamp. Such devices are more reliable, but you will need to immediately check how easy it is to get the phone;
- with the help of polyurethane legs that slide apart according to the specific size of the smartphone. Such holders still have the same problem: sometimes the phone is fixed in them so tightly that it will not be possible to get it easily.
Holders differ not only in the way the smartphone is attached to them, but also in the way they are attached to the car panel. This is their main difference and the selection criterion for most motorists.
Suction cup holders are one of the most popular: they are easy to install, they do not require damage to car interior parts. Most often they are attached to the windshield, but for this the surface must be perfectly smooth, clean and even, so if the glass has a significant slope, you may have to attach the holder to its upper part, which is inconvenient. The disadvantages of such an attachment include the fact that over time the holder begins to peel off, and if the suction cup is made of rough rubber, then at low temperatures it loses its elasticity and. naturally falls off.
The glue-based holders can be attached to any surface, but after dismantling, a noticeable mark can remain. In addition, a smartphone that is too heavy can break the mount after a while. But for not very large compact gadgets, this is a good option.
The holder with the attachment will definitely never fall off, but they are most often attached to the ventilation deflectors. This is where obvious disadvantages await: possible noise when driving on uneven roads, broken deflector blinds, closed blowing nozzle, etc. Compared to all other bindings, this is the least convenient and practical. It is better if such a holder is attached to a mirror, but there are very few such models.
An alternative to all holders is an anti-slip mat. It does not provide the same convenience of using a smartphone as the holder, but it can be easily removed and replaced.
1. Holder on a suction cup.
Holds the phone to the front or windshield.
2. Universal clip with flexible cord.
Allows you to rotate the gadget 360 degrees.
3. Mounting on the steering wheel.
4. Width-adjustable bracket.
Installed on the fan grill.
5. Magnetic ball holder.
6. Universal magnetic holder.
7. Mobile phone panel with USB cable.
Flexible anti-slip panel for a wide variety of surfaces.
Modern smartphones and tablets are not only about calls and SMS. The huge functionality of these devices makes us almost inseparable from them. And it's not just about entertainment, such as social networks, Internet surfing, watching video content, photos / videos or games. Most users use gadgets to some extent to help with their daily activities. The most requested features are email, word processing, information retrieval. But we live in an era of multitasking, and often we do several things at the same time, and the gadget needs to be held in our hands, which is very inconvenient. To solve this problem, there are special holders for smartphones and tablets that are installed on the table. The device is located in front of the user's eyes, and it costs him nothing to watch the video and at the same time do something with his hands (for example, write, tinker, eat, etc.)
Separately, it is necessary to mention the maps and the navigator. It is difficult for a modern person to imagine a trip anywhere without a navigator. Of course, there are fans of "old-school" paper maps, and sometimes they help out. But, you see, it is much more convenient to just drive in the address of the destination in the navigator and calmly move according to the instructions of the device. However, the gadget must be held in hand for this. What if you are driving or cycling?
Car and motorcycle enthusiasts, as well as professional cyclists have long been using special holders for smartphones and tablets. They are convenient in that they free their hands, and the device screen is always in front of your eyes. There are many models that differ in the installation of the holder and attachment of the gadget to it, usability and design. To understand which one you need, you need to figure out how the holders for smartphones and tablets differ.
What makes smartphone and tablet holders different
Mounting location
What do you want to use the holder for? Where do you want to attach it? This is the first question to ask when choosing a holder.If you spend a lot of time at the table, where you work in parallel, view various content, eat, then you should choose among the desktop holders. They will conveniently position your smartphone or tablet in a standing position so that the device screen is in front of your eyes. It's like textbook holders at school (remember those?), Only modern and stylish.
For motorcyclists and cyclists, there are handlebar mounts. Considering the peculiarities of riding a motorcycle or bicycle, it is better that the gadget is fixed as tightly as possible. Therefore, such holders do not allow you to raise the device high so that it is in front of your eyes - it fits snugly against the steering wheel. But it won't jump out!
For motorists, there are a number of options for attaching the holder to the car. Using a variety of mechanics, manufacturers make holders that mount to the windshield, dashboard, dashboard, ventilation grill, CD slot, cup holder, headrest, etc. It remains only to choose a convenient place in which the gadget will always be in front of your eyes. It is also important that the charging cable reaches the cigarette lighter.
Device parameters
Unfortunately or fortunately, not all holders are universal. Some are made for certain device models (this is especially true for the iPhone), and some for the type of devices (for example, a smartphone, tablet, GPS-navigator). In the first option - no problems, but in the second, you still need to take into account the parameters of the holder. They may have restrictions on the weight of the gadget (magnetic mounts), as well as the characteristics of the minimum and maximum screen diagonal (for “crab” mounts and with an adjustable clip).
Device mounting methods
There are two main ways of attaching a gadget to the holder: mechanical and magnetic. Each of them has several subspecies.Mechanical method - this is the fastening of the device to the holder using clamps. There are several subspecies of such an attachment.
"Crab" is a fastener that clamps the device as if in a vice. There are "crabs" with upper and lower clamping, as well as clamping on the sides. The first option is more versatile, but the second is more reliable. Most often, such clamps are adjustable, that is, any device can be inserted into the holder that is suitable for the weight and diagonal of the screen.
Sometimes there are universal holders made of flexible material with which you can "wrap" the device. Usually, these options are stylish and beautiful, but not suitable for use in places where the smartphone can fly out from shaking (for example, in a car).
Motorcycle and bicycle handlebar mounts are usually a transparent zip-around cover. This is the safest and most reliable way of fastening, since the gadget will not fall out of such a cover on any bump. However, the transparent film of the cover can be inconvenient: it can be unpleasant to the touch or shine in the sun.
Magnetic way - when the device is "magnetized" to the holder. The main advantage of such fasteners is the ability to easily remove the gadget and put it in place.
There are three subspecies of such an attachment.
Clip magnet are holders specially designed for certain devices, fastening to which is carried out by means of "magnetising" a special back panel that is pre-attached to the device. This is a reliable mount, but its main disadvantage is that your gadget will always have this back panel. This option is best suited for professional drivers.
A metal pad on a smartphone that "attaches" to the holder. Not only is this option much less reliable than the previous one, but also an overlay will always be glued to the gadget.
"Magnetisation" of the gadget itself. Not the safest way, but no smartphone overlays are needed.
Holder mounting methods
The holders are attached by a variety of mechanics.
For starters, it should be said that desktop holders may not be attached at all: they just stand on the surface. But there are rubberized and silicone options that will ensure the stability of the stand - this option can already be used in a car on a dashboard.
Motorcycle and bicycle handlebar mounts are mechanical clips that can be screwed to any handlebar diameter. However, if it is not firmly secured, it may start to dangle.
The attachment to the windshield, dashboard and dashboard is a suction cup. It stays firmly on a flat surface and is unlikely to ever fall off. For greater reliability, there are suction cups with a silicone-helium base.
Attachment to the ventilation grill is a clothespin that is securely attached to the ventilation. Minus - you will not have to use this lattice for its main purpose.
CD Slot Mount - Sturdy and secure mount. However, you will have to pull it out every time you want to change the disk.
Headrest Mount - a mechanical clip that attaches the gadget to the back of the headrest. An ideal find for the convenience of passengers.
360 degree rotation
This parameter is important in order to position the screen of the device as conveniently as possible. There are simply rotating stands, as well as holders with a long flexible support.Cable holder
This is not the mount, and an added bonus. If you have a long cable and want to optimize it neatly, you should look at these holders.Criterias of choice
For indoor use on a flat surface fit
Holder smartphone in the car - a necessary device
Today this accessory is an integral part of the car interior. Thanks to the correctly selected mount, the driver will be able to perform several tasks at once:
- always stay connected. Since he does not have to waste time looking for a smartphone in the glove compartment or bag while driving - which is dangerous for the life of the driver, passengers and other road users. Thanks to such a simple accessory, the phone will always be in sight;
- avoid traffic fines for talking on the phone while driving. It will be possible to use mobile communication in Hands-Free mode;
- expand the capabilities of your gadget. For example, taxi drivers take orders via a smartphone or tablet. Most modern models of mobile devices support the functions of a GPS navigator, motion recorder, and multimedia system, which eliminates the need to purchase additional equipment.
How to choose the right phone holder for your car: recommendations
First of all, you should pay attention to the fact that the latch does not block the input for the charger, headset or video camera (in case you plan to use your smartphone as a DVR). Therefore, it is better to test the selected models right in the store by placing your gadget in them.
Secondly, the size of the sliding clamps must match the dimensions of the phone. The fixation should be secure, but not too strong, so as not to damage the case and not cause inconvenience during fixing and removing. It is good if a rubber or neoprene pad is installed in the places where the phone touches and clamps, it will not only strengthen the fixation, reducing the vibration of the entire complex, but also leave no traces, protecting the phone case from scratches.
Thirdly, in most cases, drivers prefer universal car phone holders that fit most models. But if the weight of the mobile device is rather big, it is best to try to find a retainer specifically for your brand, this will avoid falling and vibration of the structure while driving.
Fourth, for drivers wishing to purchase a functional accessory for a mobile gadget, it is better to give preference to rotary devices that have the ability to quickly reorient from vertical to horizontal position and vice versa. Such functionality is possessed by clamps with a special ratchet hinge, they allow you to change the position with one touch.
Fifth, for those who plan to mount the device to the windshield, it is important to pay attention to the length of the rod. For a windshield with a large angle of inclination, a retainer with a long rod is more convenient, for a small one - with a short one.
IMPORTANT!
Before choosing a suitable model of a holder for a phone in a car, you should decide on a place in the cabin where you plan to attach the latch, and for what purposes the device will be used.
Options for installing the phone holder in the car
When deciding in favor of this or that accessory, drivers often pay attention to the fastening method. This is really the most important factor, which, when chosen correctly, allows you to conveniently and reliably place the device for high-quality performance of its assigned functions.
Magnetic phone holder for car
Appeared on the market relatively recently, but has already gained popularity among drivers. It is a small stand, the main active element of which is a neodymium magnet. The clip comes with a small metal ring or magnetic tape, which are attached to the body of a smartphone or tablet. As soon as the gadget is near the installed stand, the elements will be attracted to each other, creating a fairly tight contact, including due to the rubber core.
Most often, the base is installed on the front panel of the passenger compartment. Such a holder for a phone in a car provides 360 ° rotation of the device.
Judging by the reviews, this option is good for driving on flat roads. When driving off-road, the connection reliability is unpredictable.
Windshield phone mount
The most popular option among drivers. As a rule, it is fastened using a vacuum suction cup or adhesive tape fasteners. Most often, this option is used in cases where the smartphone performs the function of a video recorder. It is easy to choose an installation site for such a structure, it is securely fastened. With proper selection of the size of the sliding clamps used conveniently.
IMPORTANT!
If the holder is attached to the windshield using a conventional suction cup, when buying, you need to pay attention to its rubber thickness. Thick material can easily peel off the base during the cold season. It is better to choose models with nano-suction cups that perfectly hold the structure at any temperature, even on vertical surfaces.
Car phone holder for air duct grilles
The latch is attached to the grill edges using special clothespins. It wins over the previous version due to its compactness and the absence of a bracket rod. As a rule, the fixing platform installed in this way provides the driver with the opportunity to conveniently control the gadget, without changing the position of the body.
Judging by the feedback from users, such models of car phone stands are perfect for some cars, and at the same time, they are completely unacceptable for others. The fact is that not all airflow grilles are able to withstand the load of the structure and the device installed in it.
Also, some people note the moment of overlapping on the option control keybar. In this case, it all depends on the location of the buttons on the dashboard and the size of the mobile device used.
Steering wheel holder - a convenient option for a small phone
One of the cheapest mounts. The simple design consists of a sliding lock and a special strap that tightens on the handlebars. The reviews are quite contradictory. Some drivers claim that in the event of an airbag deployment, the device, together with the structure, can cause additional injuries. For others, this is a perfectly acceptable method of fastening, which allows you to keep the phone always at hand.
Handlebar holder
Car phone holder in CD
This option is suitable for drivers who do not use the CD-input of their radio for their intended purpose. This is a versatile and fairly convenient option. Installation does not require special tools, except for a CD connector. Most often, this solution is used by drivers who use a mobile gadget as a GPS navigator or a multimedia system.
Thanks to such a mount for a phone in a car, the design does not block the view through the windshield and does not interfere with the steering wheel, while the device is always under a friend and is easy to control.
Car phone holder in CD
Flexible phone cover
This group includes clamps that attach to the panel and hold the device using many small suction cups or a sticky silicone surface. These are the cheapest options, and usually the most short-lived. Due to the clogging of the surface, the quality of the adhesion of the anti-slip mat and the phone weakens over time. The main advantage noted by users is its attractive appearance. In any case, it is easy to replace if necessary.
Flexible phone cover
Car Tablet Holders
Universal models with sliding locks or Velcro, designed for devices with a diagonal of 7 to 14 inches. The structure is mounted on either side of the driver, on the windshield or torpedo.
For the use of the tablet by passengers in the rear seat, there are special holders-bars, or telescopic brackets, which are fixed on the front seat slide.
A simple phone holder for a car - how to make it yourself?
There are situations when an existing mount fails, and there is no way to buy a new one. In this situation, the driver has the question of how to fix the phone in the line of sight, providing convenient access to it? This can be done using ordinary small metal paper clips. This is the easiest way to make a car holder for phones in a car with minimal costs. This will require:
- A pair of paper clips;
- Two stationery rubber bands;
- Paint in a suitable color.
| A photo | How to make |
 |
Both prepared staples must be unbent so that the same bend is obtained. |
 |
A hook is formed from the top of the clips, with its help the retainer will be attached to the air duct grilles. |
 |
Wrap the opposite part of the paper clips with clerical rubber bands. They will enhance the fixation of the gadget and protect its body from metal scratches. |
 |
The holder is almost ready. It remains to paint both of its parts in the desired color to give an attractive appearance. |
 |
After the paint is dry, you can attach the paper clips to the ventilation grilles of the duct, wrapped in front. The DIY smartphone holder is ready for use in any vehicle. |
Review of the best holder models
The modern market offers motorists a rich assortment of interesting models. They differ not only in technical characteristics, but also in design and price. Through testing, consumers have pushed the most inconvenient and impractical phone holders into the car. Which one is the best of them, you can understand by analyzing the reviews of happy and not very happy owners of various mounts. Based on the study, several models of the best auto accessories for smartphones were identified. Each of them has both advantages and disadvantages.
Ppyple Dash-N5
Perfect for drivers who are used to actively using their smartphone. With the help of a nano-suction cup, the structure can be easily installed anywhere on the panel, in the line of sight. Thanks to its super adhesive jelly coating, the device adheres perfectly to vertical and uneven surfaces. This model is designed for electronic devices with a diagonal range of 3.5-5.5 inches. Available in matte and glossy models in white and black. Price from 700 rubles depending on the model.
Main advantages:
- Thanks to a special suction cup (which, if necessary, can be washed with plain water), the structure is securely attached to almost any surface;
- The gadget is easy to insert and remove;
- Built-in hinge allows 360 ° tilt and swivel;
- Attractive appearance.
Disadvantages:
- Dust settles quickly on glossy models.
iOttie iTap Car Mount Magnetic
A good option for a magnetic car holder for a tablet or smartphone with a small diagonal. Simple design that allows 360 ° rotation of the device to be mounted in a disk slot. Price from 2500 rubles.
Main advantages:
- easy to mount in the spacer foot of the CD player;
- powerful neodymium magnet;
- the design does not vibrate when driving;
- attractive and laconic design.
Disadvantages:
- you will have to glue a metal plate on the smartphone body, which is included in the kit;
- compared with similar models - high cost.
iOttie iTap Car Mount Magnetic
Onetto Vent Mount Easy One Touch
For those who respect the simplicity, reliability and durability. The bracket is mounted on the deflector grill and allows 360 ° rotation of the device. The wide back wall made of high-quality plastic protects the smartphone from hot air. Adjustable side clamps with soft rubberized pads allow devices from 55 to 89 mm to fit. Price from 1250 rubles.
Main advantages:
- sliding tabs with a wide range;
- built-in swivel joint allows you to adjust the position of the device by yourself;
- rubberized side holders and additional retaining plate on the bottom.
Disadvantages:
- available in black only.
KDS-WIIIX-01 T
Universal and convenient holder for the tablet in the car. Compatible with devices with a diagonal of 7-10 inches, including phablets and portable media players. Price from 600 rubles.
Main advantages:
- Supports three mounting options: windshield, dashboard, deflector grille or headrest;
- The optimal viewing angle can be adjusted thanks to the swivel mount;
- Soft silicone pads on the side holders;
- Easy to use even with one hand.
Disadvantages:
- It is not comfortable to use with all tablet models.
Which phone holder to buy in the car is up to the driver to choose. Before buying, you should decide on the place of fixing the bracket and the functions that the electronic device will perform.
An overview of four different car phone holders I've tried using. If you are looking for a phone holder for your car, it makes sense to read the review to find out about some of the options available on the market.
A very simple holder with only one ball joint for adjustment. The holder is made of matte black plastic. There are no fingerprints or scratches on it.
In the places where the holder contacts the phone, there are rubber pads (they are not glued very evenly on one holder).
The holder has a very small distance to the suction cup. Because of this, it cannot be used if the machine glass has a very large angle of inclination from the vertical: 
The head of the holder is attached to the bar with a ball joint, which allows you to rotate the phone without discretion, but which is very inconvenient to tighten.
The thickness of the rod near the hinge is somewhat confusing, although for phones weighing no more than 150 g this should not be a problem.
Also, by virtue of its design (fixing the phone by the corners), phones with a width of only 45 to 65 mm can be installed in this holder (it is written on the seller's page that up to 70 mm, but this is not entirely true, much depends on the shape of the corners of the phone ). Perhaps there are similar holders for a wider phone. 
The maximum height of the phone cannot exceed 135 mm: 
The holder should be adjusted once for a particular phone. This is done very simply: you need to press the Push button and move the vertical bar up as far as possible. After that, you need to put the phone in the holder and slide the bar back with your finger until it rests on the phone. In general, 3 seconds with one hand.
After that, the phone can be put on and off with one hand, and it is very convenient to do this and you do not need to press any buttons (the vertical bar is just slightly bent over the top petal with the thumb).
Suction cup holder that really impressed me. It differs from all I have seen kgda or suckers. It is not made of transparent soft plastic, but from something like raw rubber. It sticks to the glass so that it can be problematic to tear it off by the petal with one fingers. It also adheres without problems even to a textured torpedo. 
I really liked this holder because the phone is attached at the corners at the bottom + top. All of the controls on our phones (Sony Xperia Z1 compact and Nokia 720) are easily accessible. As a result, I ordered another such holder for the second car. it turned out to be the most convenient for me. Recommend (if it fits).
A very beautiful and well-made holder made of black matte plastic. Potential touch points of the holder and the phone are protected by multi-colored dense foam stickers (you can choose the color of the car, I took a red one for my wife). It's nice to look at him directly: 
The phone is simply placed on the holder and pressed lightly. Thereafter, the side grips securely fix the phone. To disconnect, press the two buttons located on the sides of the holder, while the grips will move to the sides and the phone can be removed. Installing the phone with this hand is only a little more difficult than in holder number two, but removing the phone with one hand is still not very convenient.
The rod of this holder does not bend, but with the help of two screws it can be set to any position. It's not very long (and stiffer), so the phone doesn't wobble on bumps in the road. It should be noted that the rod of this holder is longer than the rod of holder number two and looks more reliable. It is also more convenient to adjust it than a ball joint (although I rarely do this). 
This holder can accommodate a phone up to 72 mm wide: 
The phone in the holder is attached on the sides, so the phone controls located on the sides are inaccessible or difficult to access. However, in this holder, unlike the number one holder, you can adjust the vertical position of the phone so that the necessary controls are still available.
The suction cup at the holder is the most common. It looks better than the number one suction cup, but I only bought this holder a couple of months ago, so the suction cup hasn't passed the test of time. 
