Many users Windows 7 or Windows 8 They don’t know how to log in as administrator. The smartronix.ru computer portal offers step-by-step instructions on how to log in as an administrator.
We will demonstrate this with an example. Windows 7, but by analogy, this can be done in Windows 8. What does it take to log in as an administrator? It is enough to activate the built-in system administrator account.
Why do you need to go under the administrator when everything works? Sometimes this is necessary, for example, if the hosts file does not want to change to an uninfected virus. In order to activate this account and log in as administrator, right-click on “Computer”, which is located in the “Start” menu. After that, select the menu item "Management":
You can also access the computer through the control panel (Start\u003e Control Panel\u003e Administrative Tools\u003e Computer Management):
After we opened “Computer Management”, on the left we find “Utilities”\u003e “Local Users and Groups”\u003e “Users”, as shown in the picture:
We click on the administrator account with the right mouse button, click "Properties" and on the "General" tab, uncheck the "Disable account" checkbox:
Working in the system with administrator rights is potentially dangerous, therefore, we advise you to do everything and disable the administrator in Computer Management. We hope our simple instructions came in handy and you managed to log in with administrator rights. Come on smartronix.ru!
Hello! How to log in as administrator if Windows 7 is home base? Tabs "local users and groups" no.
Hello. How to log in as administrator, if Windows 7 is home base, and the tabs are “local
gamegroup users "no.
Hello. What version of windows 7 is installed (Start, Home, Professional, Maximum)?
I can’t access the page in classmates because I haven’t indicated a cell phone.
A temporary password can be obtained from technical support http://odnoklassniki.ru/regulations (link "Contact Support" at the bottom of the page).
when I want to change, well, I click "apply", then the "access denied" window is displayed. what to do? and not one game does not go. and nothing can be established.
Hello, and how to log in to the Administrator for some reason my computer doesn’t have any access control my computer is being written create a new admin help please
and I have windows 8.1 not found there local users of the group what to do?
Hello!
Ask a question in plain language, describing in detail what you want.
In Windows 7 64 bits on a USB flash drive, Trojan viruses. Doctor Web kurel not destroyed. He writes that the flash drive has write protection or virus. In the settings of the flash drive everything is open. I can neither delete, nor format the USB flash drive. Please help, answer me. How and how can I fix the problem?
Try to go to "Computer Management - Disk Management" and there delete the sections of the flash drive.
Also, try inserting the USB flash drive into another PC, and start formatting there.
When I go into computer management, I don’t have a local users and groups section there. What can then be done?
What is your operating system?
In Windows7, right-click on the "Computer" icon - select "Management", there is a section "Local Users and Groups"
I have Windows 7, but still I don’t have this tab there.
Provide a screenshot of the “Computer Management” onka (you can upload a photo on radikal.ru, insert a link to the photo in the answer)
The Local Users and Groups snap-in is missing in Windows 7 home editions
so what if this option (local users) is missing?
Hello. The question is: -In the lower part of the local user folder icon in TComm, an outstretched arm is depicted (as I understand it). What does this mean and how to remove it? Thank you in advance.
What is TComm?
A hand on the background of the folder means that the folder is open for access on the local network, you can disable it in the properties of this folder, the “Access” tab
Disable account fails, writes denied access. Help.
Which account do you want to disable?
Disable Administrator account fails, writes denied access. Help.
Why disable an administrator account?
Hello. Help me please. The antivirus ess7 stopped working. I decided to remove it and install another. It is not in the list of installed programs, downloaded the esetuninstaller program, cannot install correctly, manually tried to remove it - requires permission from the system. I have one account - the admin, is password protected, it still writes - access is denied, and the security properties also refuse to change anything. Conclusion - my computer was captured by evil under the nickname system. Tell me how to ask her permission. Thank you in advance.
The same nonsense with Kaspersky was. Yes, and now there is. Because of this, the winlocker picked up ... (((
It is necessary to get rid of viruses, in any other way.
Try to boot in safe mode and try to delete there; try some installer software.
start in safe mode and reset
Hello! Help please, I can’t get into Skype. He writes - contact the system administrator ..
Hello. Try reinstalling the Skype program. Are you sure to enter the correct username / password?
Hello, I can not log in as administrator with windows 8, since I do not have a local user to control the computer. Do not tell me maybe some other way is to go from the admin
Hello.
In the properties of your account, specify administrator rights.
I sent utilities and there are no local users and groups! I have Windows 7, what can I give?
Local users and groups are located in the control panel of the Windows7 OS
i go into computer control and I don’t have a folder
users, tell me what to do?
The "Users" or "User Accounts" section is contained in the "Control Panel"
i forgot the password to log in to my windows 8.1 account. is there any way to log in. bypassing the password? please, help!
On the torrent, you can download an image (similar to a LiveCD) and burn it to a disc,
boot from it and, using the built-in utilities, display or reset the password
ASUS A7U. Error 711 pops up when I want to access the Internet through a modem. Now I logged in via WWLAN from the phone. Yesterday I tried a lot of tips and diagnostics, restored the system to an earlier image and nothing helped. I found some more advice on renaming the LogFiles file to LogFiles.old , there are a lot of reviews about the positive result after this action, but when I want to rename it, it says to me that the file is open in another program or folder and I need to close them and try again. And how to proceed next? Is AVAST worth it, it’s not disconnected, as advised, although I am an administrator In MICROSOFT they said that they didn’t work with pirates, since WIND7 \\ 64 ULTIMAT was set by a friend of mine (I took the laptop BU and it was almost empty), but there is a license activation key on the back panel, a legacy from the old hosts and checked with the slui-activated command .. There is no way to carry the service yet, there may be a way out, tell me. Thank you.
1.Avast can be removed in the control panel.
2. You can try renaming the file by loading in safe mode
3.Do you have any friends of friends who could reinstall windows for a cup of coffee?
Running as administrator requires a smart card
The Administrator account gives the user full control over the computer, including full access to all system folders. At the same time, while using this account, UAC account control is disabled and does not display warning messages.
By default, in Windows 10, the Administrator account is not active and does not appear when a user is selected. In this article we will talk about how to activate this account and how to use it to log into Windows 10 as an Administrator.
Step No. 1. Run the Command Prompt with Administrator rights.
In order to log into Windows as an Administrator, you first need to activate an Administrator account. And for this you need.
In order to do this, first press the key combination Windows + X and in the menu that opens, select the item "Command Prompt (Administrator)".
After that, a pop-up window appears with a warning from User Account Control (UAC). In this window, click on the "Yes" button.
Thus, you run the command line with Administrator rights. Now, using this command line, you can execute a command that activates the Administrator account in Windows 10.
Step No. 2. Activate the Administrator account.
So, after the command line is open, you can activate the Administrator account. To do this, at the command prompt, run the command " net user admin / active: yes". If you have an English version of Windows 10, then this command will look like this “net user administrator / active: yes”.
After the message “Command completed successfully” appears on the Command line, the Command line can be closed.
Step number 3. Log in to Windows 10 as Administrator.
After activating the Administrator account, you can enter it, like any other account on the computer. To do this, click on the "Start" button, and then click on the username in the upper left corner of the "Start" menu and select "Administrator".
After that, the standard screen for logging in to your account will appear, and in order to log in to Windows 10 as an Administrator, you just have to click on the “Login” button.
Some notes about using the Administrator account:
- Do not use the Administrator account constantly. Perform the necessary operations with the system and disable this account using the command "net user administrator / active: no";
- If you plan to regularly log into Windows 10 as an Administrator, then set a password for this account;
- The Administrator account is local, also when using this account you will not be able to use new applications for Windows 10;
- The Administrator account can be turned on and off through "Local users and groups", for this you need to run the command "usrmgr.msc";
An interesting fact is met by the user when switching to Windows 7 from earlier versions of the operating system. Here, by default, the administrator account is disabled. We will talk about how to access it in this article.
Why the administrator account is disabled in Windows 7
Oddly enough, the answer to such a question is obvious. Window 7, for the most part, is designed for an ordinary user who does not understand the intricate stuffing, thousands of folders and hundreds of configuration files on his PC. An account with administrator rights gives anyone unlimited possibilities, using which it is easy to accidentally harm the performance of the software. It is worth noting that a user who wants to log into Windows 7 from under the “account” of the administrator must himself be a member of the Administrators group.
How to activate an administrator account in Windows 7
So, if you are sure of the need to gain full control over your operating system, we will do the following:
- press the Win + R hotkeys to call the “Run” utility window;
- in the line that appears, write the command control userpasswords2;
- send for execution by the “OK” button;
- a window with user accounts will appear;
- in it we go to the second tab on the left - “Advanced”;
- in the menu below we find the button, which is also called “Advanced”;
- click it, a window with a list of accounts will appear;
- in the left column select “Users”;
- double-click on the “Administrator” to the right;
- inside we find the line with the checkbox “Disable account";
- remove the daw, click “OK” to apply the perfect changes.
Automatic login with administrator privileges in Windows 7
If you need to constantly go into the operating system “fully armed” and not switch to the administrator manually, you can delete other accounts for simplicity. Before doing this, it is recommended that you create a recovery point (in case of failures or errors, you just boot into the working version of the system). Further:
- click “Start”, select “Control Panel”;
- in the “User Accounts” section, select “Add and Remove”;
- all available accounts will be shown here - select unnecessary one by one;
- click once, in the opened options, click the line “Delete”;
- if the “Guest” account is on, click on it and put it into the “Disabled” mode;
- restart the PC and check if you go to the “Administrator” automatically.
Create a second administrator account in Windows 7
But what if there are two or more computer administrators? It is easy to make several accounts with the highest rights, for example:
- You can create a new entry. To do this, go to “Control Panel” -\u003e “Add \\ Delete Account”, under existing ones, click “Create New”. In the next window, you can just choose whether the owner will be administrator or user.
- You can make an entry in the Administrators group. Open “Add / Remove” (see above), select an account, click on it, inside, click on “Change record type”. Here we set the switch from user to admin.
If you need to create records without administrator rights, you can at any time through the above “Control Panel” -\u003e “Accounts” -\u003e “Add and Delete”.
In Windows 7, logging in as an administrator is required when unlimited rights are required. Often this is due to the need to make changes to the parameters of the system itself, protected files, or the installation of some programs.
By default, an account with administrative rights is locked. This is due to the Windows security policy (we recommend a site with free programs for Windows), as inexperienced users can lead to its inoperability with their actions. However, logging in as an administrator is possible using several methods.
Enabling Administrator Entries from the Computer Management Menu
This method involves performing the necessary settings by the operating system in windowed mode.
1. Open the start menu and click on the “My Computer” item with the right mouse button. In the drop-down menu you need to select "Management"
2. In the console that opens, open "Computer Management (Local)", then select the appropriate "Users and Groups".
3. Go to the "Utilities".
4. We select "Local users and groups", of which we need "Users".
5. From the list on the right side, select the user "Administrator", right-click on it. In the menu, click "Properties".
6. The settings window will open. In the "General" tab, you need to uncheck the "Disable account". Then click “OK” to save the settings.
After making these changes, you can log in under the administrator’s academic record. The same settings will be relevant for Windows 8.
Command line login
Another option for logging in as an administrative account from the command line is a special panel for executing system commands.
First, launch the panel itself as administrator:
1. Open the “Start” menu, select “All Programs”, then “Standard”.
2. We find the item "Command line", right-click on it. In the menu that opens, select "Run as administrator".
3. A console window for entering commands will open. In this window, you need to register a command of the form:
net user Admin / active: yes
where Administrator is the name of the administrative account. For the English-language Windows system, enter the name administrator.
After the formation of the command, press Enter, after which the system will report on its successful execution
4. Now you can close the window, log out and log in as an administrator.
To return to the original settings, you need to run the command line again and enter the command:
net user Admin / active: no
These methods of obtaining rights are suitable only for accounts that are part of the administrator group. When authorizing under the administrator, keep in mind that you should make only those settings that you are sure of. The system itself will not be able to limit you to changes that can lead to fatal crashes.
Related Publications
February 19, 2019, 19:33
Social networks want to implement the function of transferring funds through the exchange of stickers. Instagram will help charitable foundations to collect money from users, and now the implementation of the project is at the stage of closed testing. The social network will introduce special stickers, during the exchange of which users ...
I think it’s not a secret to anyone that starting with Windows Vista, logging in as Administrator is a bit more difficult than in Windows XP and earlier versions of this operating system. The thing is that by default, this Administrator account is locked. Why was it blocked? It’s just that very often, when users work with the Administrator account, they put the whole system at risk, which, of course, will make them worse.
So, let's still figure out for what reason, we should not work on the computer with the Administrator account. Firstly, if you correctly understand the entire operating system, then the Administrator is the main person, that is, he has a unique opportunity to change all system settings without exception. Naturally, inexperienced users, as well as those who are very curious, having such a weapon in their hands, can harm their own operating system, for example, reconfigure the registry!
Sometimes we still have to log in with the Administrator account, or it may be necessary, in any case. What for? As you already understood, you can configure anything with it. That is, it’s much easier to deal with problems and configuration issues with the Administrator account!
Let's finally look at the procedure itself, thanks to which we can log into the account of the immediate Administrator in the Windows 7 operating system. The account itself will certainly have to be part of the group of administrator accounts.
So, first we need to open the Console called " Computer management". We go to Start, then to the button" My computer"Click the right mouse button, in the window that opens, click on the button called" Control».
Next, select the " Computer management", Click on it, and then enter" Local groups and users", After, click on" Utilities", Then click on the button called" Users", We find the user with the name" Administrator»And click on its icon with the right mouse button. A window opens in which we need to click on the button " The properties».
We enter the bookmark called " Are common", After which we just need to uncheck the box next to" ". All, click on the "OK" button.
Now just log in as Administrator, for this we log into " Start"And click on the subsection near the shutdown of the computer, and in the window that opens, click on the button called" Change user».
This is the easiest and most memorable way. There is another way to add the user " Administrator", Only in this case we will need to use" Command line", Which can be called up using the menu" Start", Then press the button" All programs", Open the folder" Standard", There to find" Command line»And open it on behalf of the Administrator, which can be done by calling the command line context menu.
At the command line, write the following phrase: net user Admin / active: yes"(Quotation marks are not needed)! All save by pressing Enter!
After that, you can also use the " Change user"And we see the same result! If you need to disconnect the user, change from yes to no.
net user Admin / active: no
Now you know how to log into Windows 7 as Administrator.
