Introduction
Our installers for Windows contain a complete client-side installer (MSI) package (built on top of Windows Installer v2.0). The network installation instructions assume that the user is familiar with the basics of Windows Installer, specifically deploying MSI files. This package can be used with any Windows operating system that supports Windows Installer v2.0.
Installation on a network server
- Double click on the resulting file ( Yenka_Setup_ (MSI) .exe)
- Install this package to the shared folder for your programs.
- Attention : The program must be activated BEFORE deploying the package to the network. To do this, run "Yenka.exe" from the folder where you installed the program (<путь установки>\ program files \ Yenka \ Software \ Yenka.exe), and follow the activation instructions.
Installation
Installing an MSI package using the command line
- In the command box, enter the line:
msiexec / i "<путь к MSI файлу>\ YK.msi "
where:<путь к MSI файлу>this is the path to the Windows Installer package file. For example, a line might look like this: msiexec / i "C: \ Program Files \ Yenka \ YK.msi" - Press the ENTER key
Attention: The Windows Installer service will allow you to install in "invisible" mode, using the "/ q" switch. For example: msiexec / i "C: \ Program Files \ Yenka \ YK.msi" / q... To show the progress bar of the installation, you can use the " / qb".
Removing an MSI package using the command line
- From the "Start" menu, select the "Run ..."
- In the command box, enter the line:
msiexec / x "<путь к MSI файлу>\ YK.msi "
where:<путь к MSI файлу>this is the path to the Windows Installer package file - Press the ENTER key
MSI laptop screen not working? What measures should be taken in this case? First of all, you should connect the laptop to the monitor and check if an image appears on the external monitor or not. If it does, then, most likely, the laptop matrix or the loop has fallen into disrepair. If not, the breakdown lies in the gland itself. And here it is already necessary to consider several options.
- Problems may arise when opening and closing the cover. If you suddenly notice that the display turns off when closed, then goes into sleep mode, and turns on during opening, this already suggests that the reason should be sought in the power button itself. She very often suffers from moisture or dirt getting inside, as a result of which it sticks. The button is most often located in the upper corner, on the panel where the monitor is located, or in the place where the cover is snapped. If it is damaged, it will be necessary to make a quality replacement.
- If MSI shows, but there is no backlight, it means that the inverter itself or the backlight is defective. These two components are responsible for the backlight of the laptop. We will inspect the equipment and say whether the inverter can be repaired or not. Most often, you have to completely change the inverter or backlight lamp.
- If the matrix is black, while there is or is no backlight on the sides, several options must be considered, since the hardware itself is damaged:
- In 80%, it does not show the display if the video chip becomes unusable. This usually happens as a result of overheating.
- 5% if monitor stopped working, this may mean that the memory module, power supply unit, or some other component is not working. It is necessary to check everything.
- In 10%, other problems may arise. It will be possible to determine the breakdown only after we carry out a full diagnosis in the telemama service.
MSI laptop display won't turn on
If MSI laptop boots and everything freezes.
- Naturally, this may indicate that the problem is in the hard drive itself.
- An error may also occur on the hard drive.
Nevertheless, malfunctions most often arise as a result of some kind of mechanical damage. It is far from always possible to immediately determine the cause of the breakdown. That is why the specialists of our service center, first of all, carry out a complete diagnosis. We will repair MSI CR / CX, G-series, FX / FR, Wind Top and Wind anyway.
| Seize the moment: 2 weeks left until the end of the promotion! Seasonal discount 40-70% |
|||
| the name of detail | The cost of components in rubles. | Installation cost (repair) in rubles. |
Order service |
| 1 year warranty |
Call or press The average price of the matrix is 4500 3950 rubles. | 900 | |
| 2900 | 900 | ||
| 1500 | 900 | ||
| 1900 | 900 | ||
| 900 | 900 | ||
| 1100 | 900 | ||
| Battery replacement | 1800 | 900 | |
| from 900 (of your choice and depending on performance) | 900 | ||
| 1990 | |||
| Replacement of the south bridge | from 800-2900 (depending on the laptop model) | 1990 | |
| from 900-2900 (depending on the laptop model) | 1990 | ||
| 900 | 900 | ||
| 900 | 900 | ||
| 1100 | 900 | ||
This guide should help if you see one of the following error messages when installing a program in Windows 7, Windows 10 or 8.1:
- Windows 7 Installer Service is not available
- Unable to access the Windows Installer service. This can happen if the Windows Installer is not installed correctly.
- Unable to access the Windows Installer service
- Windows Installer may not be installed
Another way to fix the Windows Installer Service Unavailable error is to re-register the Windows Installer service on the system.
To do this, run the command line as administrator (in Windows 8, press Win + X and select the appropriate item, in Windows 7 - find the command line in standard programs, right-click on it, select Run as Administrator).
If you have a 32-bit version of Windows, enter the following commands in order:
Msiexec / unregister msiexec / register
This will re-register the installer service on the system, after executing the commands, restart your computer.
If you have a 64-bit version of Windows, then run the following commands in order:
% windir% \ system32 \ msiexec.exe / unregister% windir% \ system32 \ msiexec.exe / regserver% windir% \ syswow64 \ msiexec.exe / unregister% windir% \ syswow64 \ msiexec.exe / regserver
And also restart your computer. The error should be gone. If the problem persists, try to manually start the service: open a command prompt as administrator and then enter the command net start MSIServer and press Enter.
3. Reset Windows Installer Service Settings in the Registry
Typically, the second method is sufficient to fix the Windows Installer error in question. However, if the problem is still not resolved, I recommend that you familiarize yourself with the method for resetting service parameters in the registry, described on the Microsoft website: http://support.microsoft.com/kb/2642495/ru
Please note that the method with the registry may not be suitable for Windows 8 (I cannot give exact information on this matter.
It works for you: Unknown Unknown
Msi.dll repair tool is compatible with your operating system
Msi.dll error symptoms
msi.dll refers to certain features and resources that enable applications or games to run properly on your PC. If msi.dll is missing or corrupt due to various reasons, you may encounter errors. When a dll error occurs, the user is usually notified using a pop-up message that provides information about the error that has occurred.
msi.dll Error Screenshot
Other possible msi.dll errors:
- Msi.dll crash
- msi.dll not found
- msi.dll could not be found
- msi.dll Access Violation
- Msi.dll could not be found
How to fix msi.dll error
To fix the msi.dll or other .dll files related errors automatically, download the DllKit, the .dll repair tool, and perform a scan for invalid or missing .dll files. DllKit will also check to see if other dll files are registered on your system and will look for other issues that may be preventing your system from working properly. Once the scan is complete, DllKit will help you fix the errors.
The installation of an application or program on a computer does not always complete successfully.
When trying to install a software product on a computer running the Windows 7 operating system, a Windows Installer package error appears.
Reasons for the error
Read also: Everything About NET Framework for Windows 10 Download Methods, Installations and Common Errors
Before trying to fix a problem, you need to know the exact cause of its occurrence. The main reason for the error is the restriction of access rights.
In other words, when running the installation file, the system cannot determine if the user has sufficient rights to run.
Often, the "Windows Installer package error" message is accompanied by numbers and letters. This data points to those folders to which the user does not have access.
Also, the reason for the error may be the absence of several files in the installation program.
Some files can be destroyed by antivirus software, mistaking them for malware.
If the application was downloaded from a pirated resource, then it is quite possible that a number of files required for correct installation were initially missing.
When installing any application on a computer, you must disable or configure the anti-virus program. It is recommended to perform these actions only when there is one hundred percent confidence that the file being installed will not harm the computer.
When installing, which programs are most likely to receive an error message?
Read also: How to change the type of Windows network: Instructions for all versions (7/8/10)
Windows Installer package error appears when installing files with MSI extension, as well as programs such as Java and emulators.
The error message when installing Java contains a numeric code - 1721. It indicates that the installation process has failed.
The reason may be hidden both in the lack of installation rights and in the antivirus program. In order for the installation of files to become feasible, they must be added to the list of exclusions in the antivirus settings.
If, after that, the error remains the same, the problem lies precisely in the system's permission to install the file.
Installing the iTunes application has its own characteristics, which will be discussed below.
ITunes Unable to Install - Windows Installer Package Error
Read also: iMyFone TunesFix: the solution to all kinds of errors and problems when working with iTunes without losing data!
This error can occur when trying to install iTunes on a computer running Windows 7 operating system.
To fix it, you can reinstall the operating system. Or, install iTunes correctly.
Correct installation of the program is carried out in the following sequence:
- On the computer keyboard, hold down the "Windows" + "S" keys.
- In the appeared program search window, you need to enter the word "programs and components" and click on the result.
- In the list of programs, you need to find "Apple Software Update".
- By clicking on the program with the right mouse button, select the sub-item of the context menu "Restore". If you click "uninstall", then during uninstallation the message "iTunes Windows Installer package error" will appear. Then you just have to follow the on-screen prompts.
- After completing all the steps to restore the program, it should be uninstalled. To do this, you need to return to the list of programs, and already click on the "delete" button.
- After uninstalling the program, the computer should be rebooted.
- After a reboot, Ituns is installed again.
What if the problem persists?
Read also: TOP-3 Simple Ways to Clear RAM on a Computer or Laptop under Windows 7/10
However, the above actions do not always save you from malfunction.
If, after performing the above operations, the error remains, then the following series of actions should be performed:
1 Right-click on the installation file, select the sub-item "open with".
2 Select an archiving program from the list that appears.
3 In the window that opens, run the fourth file from the top.
4 Close the archive, and try to install iTunes again.
5 The program is easily installed on the computer.
The iTunes program needs to be downloaded from the official website.
When installing Aytyuns, the Windows Installer package error "crashes". To solve this problem, you should follow the above steps.
At the same time, you should not install system updates via the Internet. They must be downloaded from or.
This will prevent the Windows Installer package error from appearing when installing iTunes on Windows 7.
Error installing files with MSI extension
As mentioned above, the error can occur not only when installing iTunes, but also when trying to install any programs whose installation file has the MSI extension.
Files with the .exe extension are installed without any problems. This is because when working with MSI files, a utility is used to download msiexec.exe.
Her refusal to work and may be the cause of the error.
If an error occurs during installation, then the reason lies in the installation file. The utility works as it should.
The error message can be of two types:
Before fixing the problem, it is necessary to diagnose the operation of the installation utility.
Diagnostics of the utility for installing files
Read also: [Instructions] How to enter Safe Mode in the Windows operating system (XP / 7/8/10)
Diagnostics of the functioning of the installation utility is carried out as follows:
- With the key combination "Win" + "R" you need to open a system window designed to execute commands;
- In the field you need to enter the command services.msc, and confirm with the OK button;
- In the service display window that opens, you need to find the Windows installation service (in this case, it is Windows 7);
- After double clicking on the service, the service configuration window should appear. All parameters must be set exactly as shown in the screenshot;
The above problems are solved by re-registering the installation utility in the Windows operating system. The re-registration process is carried out in the following way:
You need to open the command line, it can be opened in several ways: using the keyboard shortcut: "Windows" + "X", or by running the command line utility, which is located in the "standard programs" folder.
In addition to these methods, the command line can be launched using the cmd.exe command in the "Run" window.
The following commands fit into the 32-bit version of the operating system:
Commands for 32-bit version
In the 64-bit version of the system, you need to enter:
After completing the entry of commands, they must be confirmed by pressing the Enter key. After confirmation, the computer should be restarted.
The command line is launched as administrator. The command line not only scans the computer for damaged files, but also replaces them with whole ones. This requires the PC to be connected to the Internet.
After scanning and replacing files have been completed, you should restart your computer. After rebooting, you need to try to run the installation file with the MSI extension.
In addition to the utilities built into the system to restore the installer, Microsoft offers a third-party utility. It can be downloaded from the official website of the corporation.
It is worth noting that it works on Windows 7, XP, Vista.
