Download the jaf program. Download jaf program Download j a f program for firmware

JAF is a program for flashing NOKIA phones. The latest version at the moment, no special boxes and smart cards are required. All you need is a usb cable from your phone. Now you can easily, at home, update the firmware of your NOKIA phone, the program has access to support sites where you can download updated program files, firmware, circuits and other software related to the repair of mobile phones.

1. Run JAFSetup_1.98.62 and install (do not change the program installation path).
2. Run OGM_JAF_PKEY_Emulator_v3, select Random PKEY Rascal SN (or any other), JAF (main), press GO.

On Windows 7, OGM_JAF_PKEY_Emulator_v3 must be run in compatibility mode with Windows XP: right-click on the shortcut-> Properties-> Compatibility tab-> check the box next to "Run this program in compatibility mode with", select Windows XP (Service Pack 3) and click OK.

At startup, the error BOX DRIVER NOT INSTALLED! Nothing wrong with that.

When flashing, just in case, plug the cable into one of the ports located on the rear panel of the power supply.

In the archive:

  • JAF \ JAF installation \ Addon_J.A.F. P-key X Edition 1.02b.exe
  • JAF \ JAF install \ JAFSetup_1.98.62.exe
  • JAF \ JAF emulator \ OGM_JAF_PKEY_Emulator_v4.exe


Introduction
After reading the article, you can flash a phone that does not turn on Nokia through the J.A.F. in the so-called "DEAD MOD". This work is written in simple accessible language, so any owner of a Nokia phone can use it.

What do we necessary?

    1. Firmware for your phone. I recommend the latest version.
    2. Phone, USB cable, fully charged battery.
    3. Installed program J.A.F. A description of its installation can be found on our forum in the corresponding.
    4. Computer with OS Windows XP, Vista. XP recommended.
    5. All programs related to Nokia (Nokia Ovi suite, Nokia PC suite, Nokia Software Update, their various utilities, etc.) must be removed on the computer. Otherwise, problems that we do not need may arise.
    6. Disable antivirus and firewall.
So let's get started.

Main part
We turn off the phone, remove the battery, put it in place. Install the driver, if, of course, it was not installed earlier. Note: we can find out about the installed drivers by looking at the installation / removal: Start -> Control Panel -> Add / Remove Programs... There should be two installed:

We insert the cable, briefly press the power button (three to four seconds) on the phone, WINDOWS will find two new devices from Nokia(they will disappear after 3 seconds). Repeat this procedure five to six times with an interval of 20 seconds.

We reboot the computer. Install previously downloaded from our site latest version on computer. Launching the program J.A.F. by clicking on the shortcut on the desktop, which has the name " Start J.A.F.". A window appears in which we are required to press the button" Start ".

Then we ignore the error message (Error: BOX DRIVER NOT INSTALLED) and click "OK". It will not affect the course of our work in any way.

In the window of the running program select the BB5 tab.

Then tick off items " Manual Flash", "Dead USB", "Factory Set", "Normal Mode", "Use INI". After that, uncheck the box CRT 308, we wait. A window appears in which you must select your (!) Phone model. I was stitching, that's why I chose the appropriate model. After selecting the phone model, click "OK".

After that, the program itself finds the files it needs (previously installed) for flashing your phone.

If you wish, you can choose another product code (if you don’t know what it is, better not touch it) by going to the product codes selection tab.

So, now let's click on the button on the right, which has the name " FLASH". A window will appear.

We press "YES". Immediately after the lines appear in LOG " Init usb communication ... PRESS POWER ON NOW! Searching for phone ... Found", press the power button on the phone until two devices appear in the device manager, and after they appear, the firmware will automatically start.

During the firmware, the computer will find new devices. It should be so. We are waiting for the program to perform all the operations it needs with the phone. And when the program completes the firmware, we will see the lines in the LOG "Setting test mode ... Setting FULL FACTORY ... Operation took 0 minutes 7 seconds ... Done! Done!" That's it, our device is stitched. After the firmware, drivers for the phone will begin to be installed, if they have not been installed before. We wait. If a window pops up, wait until all devices are installed. After completion, click " YES". Now the phone will turn itself on, and we can disconnect it from the PC.

Remark:
Usually it is not possible to flash it the first time, various errors may appear in the log. This is normal. The main thing is not to give up and repeat the above process until the firmware is successful. When the error "Error reading Phone init data" appears at the start of the firmware, just take out and insert the battery again and repeat the process, try to hold the power button longer. JayDi, Eliseev Alexey USB flashing of dead Nokia phones via J.A.F.

24
jan
2010

Phoenix & JAF 2009.20.10.39068 and 1.98.62

Year of issue: 2009
Genre: Firmware
Developer: VMware;
Developer site: http://www.vmware.com
Interface language: Russian + English
Platform: Windows XP, 7
System requirements: 233 Mhz 128 ram
Description: Phoenix Internal Service Software project 2009.20.10.39068 + JAF Software 1.98.62 + MobiMB 3.5.31 Rus.

Phoenix and JAF are the best utilities for (re) flashing, tweaking and testing Nokia phones.
The 4th build project includes Phoenix Internal Service Software 2009.20.10.39068, JAF Software 1.98.62 and MobiMB Browser 3.5.31 Rus. Installer in Russian. One-click assembly installation with a quick and / or hidden key.

Programs and drivers in the 4th assembly of the project.
* Phoenix Internal Service Software 2009.20.10.39068
* J.A.F. Software 1.98.62 (addon 2.0 by JayDi)
* MobiMB Media Browser 3.5.31 Rus
* NaviFirm 0.1
* Nokia Unlocker 1.0b Rus
* Nokia Connectivity Cable Driver 7.1.17 Rus (NCCD)
* MSXML 6 Parser
All of these assembly components are automatically placed without selection.

Features of the programs:
* Phone firmware in Normal and Dead - modes (Phoenix, JAF)
* Firmware via Prommer Tool (Phoenix)
* Downgrading - downgrade to an earlier version of the firmware (JAF)
* Phoenix Browser - view and work with (hidden) folders and files on your phone (Phoenix)
* MobiMB Browser - work via USB, Bluetooth, IrDa with (hidden) folders and files (MobiMB)
* Downloading firmware for any phone and product code directly from Nokia servers (Phoenix, NaviFirm)
* Full work with Product Profile via * .ppu (Phoenix)
* Format C - formatting the phone's internal memory without flashing (Phoenix, JAF)
* Easily save and restore Product Profile settings via * .pp (Phoenix, JAF)
* Save, restore, edit the phone book via Phonebook.txt (Phoenix)
* Saving, restoring Permanent Memory (PM) of the phone or its individual blocks (Phoenix, JAF)
* Change of product code (Phoenix, JAF)
* Opening the security code of the phone (JAF, Nokia Unlocker)
* Reveal memory card password (Nokia Unlocker)
* Taking screenshots from the phone screen, including java games and java applications (Phoenix)
* Lots of other phone settings available on the Testing (Phoenix) tab
* New hotkeys in Phoenix: F5 - Normal Mode, F6 - Local Mode, F7 - Test Mode
Add. Information: For JAF to work in Win 7, set compatibility with Win XP in the properties of the executable file and the emulator and run as administrator.
Other details at http://forum.allnokia.ru/viewtopic.php?t=44556


09
but I
2017

Windows 10 Manager 2.1.8 DC 10/20/2017 RePack (portable) by KpoJIuK

Year of issue: 2017
Genre: Optimization, system cleaning
Developer: Yamicsoft
Developer site: http://www.yamicsoft.com/ru/windows10manager/product.html
Interface language: Russian
Build Type: RePack
Bit depth: 32/64-bit
Operating system: Windows 10
Description: Windows 10 Manager is an all-in-one utility for Microsoft Windows 10, it includes more than forty different utilities to optimize, tweak, clean, speed up and restore your Windows 10, helps to make your system faster, fix system malfunctions, improve stability and security, personalize your copy ...


09
May
2011

XnView 1.98 Full

Year of issue: 2011
Genre: Graphic editor, converter
Developer: XnView
Developer site: http://www.xnview.com

Build Type: Standard
Bit depth: 32-bit
Operating system: Windows 2000, XP, 2003, Vista, 2008, 7
Description: Updated XnView, a utility for viewing and converting graphic files. The program supports work with a huge number of formats (both import and export), is capable of creating animated images, works with metadata, and provides IPTC editing capabilities. Also XnView ...


18
jan
2011

Sippoint 3.0.1.98

Year of issue: 2011
Genre: IP-telephony
Developer: SIPNET eu s.r.o.
Developer website: http://www.sipnet.ru/
Interface language: Russian
Platform: Windows 98, 2000, XP, XP x64, 2003, 2003 x64, Vista, Vista x64, 7, 7 x64 Linux, Mac OS
System requirements: Broadband Internet, including 3G, 4G or other mobile Internet; Microphone; Web-camera.
Description: Now it will be even easier to communicate, thanks to instant messaging, the function of tracking the status of the interlocutor, as well as advanced personalization options. The program interface has been completely redesigned to make it even simpler and more user-friendly. ...


13
Dec
2008

Delphi 2009 and C ++ Builder 2009

Year of issue: 2009
Genre: Programming
Developer: Embarcadero Technologies
Publisher's website: http://www.embarcadero.com
Interface language: English
Platform: Windows® 2000, XP, Vista
System requirements: - 1.5 GB of disk space for full installation; - Pentium II 450MHz or higher processor (Pentium III 850+ MHz recommended); - 256 MB RAM (512 MB recommended);
Description: Delphi 2009 and C ++ Builder 2009 + Cure Includes two application development environments Delphi 2009 and C ++ Builder 2009. New versions of popular application development tools (RAD). Internationalization ...


28
jan
2011

Teleport Ultra 1.62

Year of issue: 2010
Genre: Offline browser
Developer: Tennyson Maxwell Information Systems, Inc.
Developer website: www.tenmax.com
Interface language: English
Platform: Windows XP, Vista, 2008, 7
Description: A program for the full or partial download of sites from the Internet, while preserving the entire internal structure of directories and files for later viewing offline. Teleport also allows you to download certain files by size, type, for example: mp3 files, graphics, archives, etc. or by the words contained within the file. It is considered one of the best of its kind. Improved and d ...


20
May
2011

RarmaRadio 2.62.1

Year of issue: 2011
Genre: Online radio player
Developer: RaimerSoft
Developer site: http://www.raimersoft.com/
Interface language: Multilingual (Russian is present)
Build Type: Standard
Bit depth: 32-bit

System requirements: Internet connection
Description: RarmaRadio is a program for listening and recording Internet radio stations. It has a wide range of capabilities, providing comfortable listening to radio stations and convenient recording of broadcast data. The program contains many stations sorted into groups depending on the genre of music, b ...


16
feb
2011

Slow-PCfighter 1.4.62 + Portable

Year of issue: 2011
Genre: System tuning and optimization
Developer: SPAMfighter
Developer site: http://www.spamfighter.com/
Interface language: Multilingual (Russian is present)
Platform: Windows 2000, XP, XP x 64, Vista, Vista x64, 7, 7 x64
System requirements: Memory 512 KB Free disk space 10 MB
Description: Has your PC become slower lately? Have you ever gotten irritated and annoyed while sitting in front of your slow computer, eagerly staring at the screen? If this sounds familiar to you, don't worry! There are many reasons for slow computers, ...


06
june
2016

Last Еmpіre-Wаr Z 1.0.62

Year of issue: 2016
Genre: rts, online, strategy
Developer: IM30
Developer site: www.im30.net/
Interface language: Russian
Platform: Android 2.3.3 or above
System requirements:
Operating system: Android 2.3.3 or above
Description: Last Empire-Wаr Z is a strategy game. The apocalypse has come and the world is flooded with zombies. Lead the survivors and defend the last refuge of humanity, reflecting the attacks of walking flesh eaters and other enemies. Last Empire-Wаr Z gives you the chance to play with allies and enemies from all over the world! In the game, your shelter will be attacked by merciless enemies, I take ...


25
oct
2009

Top 10 Welcome Screens of 2009

Year of issue: 2009
Genre: Welcome screens
Number of files: 10
Resolution: 1680x1050; 640x400
Format: Exe
Description: 10 most beautiful welcome screens in 2009! Do not require any additional programs to install


12
sep
2011

TuneUp Utilities 2011 10.0.4400.20 Final

Year of issue: 2011




Build Type: Standard
Bit depth: 32/64-bit
Operating system: Windows XP, Vista, 7

Description: TuneUp Utilities 2011 is a new version of a large set of various tools for tuning and optimizing the system. With the help of this program, you can clear disks from garbage, delete invalid entries ...


01
apr
2011

Effects Master 4.98

Year of issue: 2011
Genre: Graphic editor


Interface language: Russian
Description: Master Effects - a program for processing photos using a variety of filters. With its help, you can completely transform any image. The program allows you to use more than 50 effects, including both traditional and original. You can see your photos against a background of rain and snow, in fog and under clouds, add sunlight or whirl in a typhoon stream ... Eff ...


12
sep
2011

TuneUp Utilities 2011 10.0.4400.20 Final Portable

Year of issue: 2011
Genre: Optimization, system tuning
Developer: TuneUp Corporation
Developer site: http://www.tune-up.com
Interface language: Multilingual (Russian is present)
Assembly Type: Portable
Bit depth: 32/64-bit
Operating system: Windows XP, Vista, 7
System requirements: Processor 800MHz 256MB RAM 64MB Video Memory 62.4MB free disk space for installation
Description: TuneUp Utilities 2011 is a new version of a large set of various tools for tuning and optimizing the system. With this program, you can clean disks from debris by deleting ...


12
sep
2011

TuneUp Utilities 2011 10.0.4400.20 Final RePack

Year of issue: 2011
Genre: Optimization, system tuning
Developer: TuneUp Corporation
Developer site: http://www.tune-up.com
Interface language: English + Russian
Build Type: RePack
Bit depth: 32/64-bit
Operating system: Windows XP, Vista, 7
System requirements: Processor 800MHz 256MB RAM 64MB Video Memory 62.4MB free disk space for installation
Description: TuneUp Utilities 2011 is a new version of a large set of various tools for tuning and optimizing the system. With this program, you can clear disks from garbage, delete invalid entries ...


06
May
2011

EfficientPIM Pro 2.98.243

Year of issue: 2011
Genre: Personal Information Manager, Organizer
Developer: Efficient Software
Developer website: http://www.efficientpim.com/
Interface language: Multilingual (Russian is present)
Build Type: Standard
Bit depth: 32-bit
Operating system: Windows 98, Me, NT, 2000, XP, 2003, Vista, 7
Description: EfficientPIM is a full-featured personal information manager that helps you organize and plan your work and personal life. With this program you can keep track of contacts, appointments, tasks, birthdays, keep notes, keep diaries and even store couples ...


02
apr
2011

Effects Master 4.98 Portable

Year of issue: 2011
Genre: Graphic editor
Developer: Advanced Management Systems
Developer site: http://www.amssoftware.com/
Interface language: Russian
Platform: Windows 2000, XP, Vista, 7
System requirements: Computer with a processor clock speed of at least 300 MHz RAM at least 128 MB (allowed minimum - 64 MB)
Description: Master Effects - a program for processing photos using a variety of filters. With its help, you can completely transform any image. The program allows you to use more than 50 effects, including both traditional and original. You can...


Many cell phone holders, who are their regular users, and literally do not let the devices out of their hands, often feel dissatisfied with the software preinstalled there, wanting to carry out firmware or system improvements. In most cases, the only acceptable option for users is a direct and direct appeal to the masters of service centers offering firmware services, or, as we used to say, improvements to the working system. Meanwhile, you can cope with the task of flashing a mobile phone on your own.

So, as you understand from the title of the article, it is devoted to the special program jaf, which, if you wish, can be downloaded for installation on a personal computer and used accordingly independently. With a one-time installation of the jaf program on your computer, you can easily and without any problems update your mobile phone and improve the operation of its operating system, using, no matter how banal, the link to free download a little further. A distinctive feature of this utility over its other counterparts is the work without an Internet connection.

Download jaf program for Windows 7

If you decide to update the operating system preinstalled in your cell phone, there is nothing better than the jaf program, believe me, you cannot find it, especially downloadable absolutely without any restrictions. There is only one small nuance in this matter and lies in a very subtle zest - finding the firmware version for your cell phone, according to the requirements and standards, so to speak. Unfortunately, it is this situation that seems to be the main problem for most users who decided to independently cope with this difficult task of updating the operating system.


It is also important, when planning to use the jaf program, to correctly install it over the operating system already installed on the computer by downloading the distribution kit from the portal where there is a sea of ​​free software available, and most importantly interesting to many users. Among other things, you must have the necessary cables to update your mobile phone, without which, of course, no software operation is possible.


You can learn how to work correctly in the jaf program, installed in advance after downloading for free, from the corresponding section of the reference information, which offers a lot of answers to frequently asked questions from users on this topic. The rest of the conclusions that the use of this product is the right decision in updating a mobile phone, it seems to me, you can quite make yourself.

Hello dear users of Treshbox, this topic is dedicated to the firmware Nokia smartphones on Symbian 9.4.

Attention, all actions you perform at your own peril and risk, I am not responsible for your mistakes when flashing. Detailed, step-by-step instructions are under the cut.

Well, let's start.

Step 1.

  1. We download the firmware you like for your phone.
  2. After downloading the firmware, put it along the path C : \ ProgramFiles \ Nokia \ Phoenix \ Products \ RM-625
  3. If you downloaded the firmware and it comes as an installer, then check that it is installed along the above path, or set it yourself.
  4. Since I am the owner Nokia 5228, then, accordingly, I am considering this method for this device.
  5. Take a look 1-point, if your phone is of a different model (for example, 5800, 5230, X6) then the path will be different, only the last folder will change (for example, for the 5800 model there will be C: \ Program Files \ Nokia \ Phoenix \ Products \ RM-365
  6. If you don't know the RM-code of your phone, then this is for you:
  • NOKIA 5228 - RM-625
  • NOKIA 5800 - RM-365
  • NOKIA 5230 - RM-588
  • NOKIA X6 - RM-559
  • NOKIA C6-00 - RM-612
  • NOKIA N97 - RM-505
  • NOKIA N97 mini - RM-555
  • NOKIA 5250 - RM-684
  • NOKIA C5-03 - RM-697

ATTENTION: I would not receive "dead body" in place of the phone do not downgrade firmware!
1) We dial in the phone: *#0000# and in the field Version, see the firmware version.
2) Then we look at the version of the firmware that you want to install (usually indicated)
3) Compare versions. If the version of the desired firmware matches the firmware of your phone or higher, then you can safely reflash. If not, then in no case should you use this firmware.

Step 2.

  1. Install J.A.F, for this we run J.A.F Installer.exe from folder JAF Installer... Install without changing the path.
  2. If you do not have firewood installed on the NOKIA USB connection, then follow the path: C: \ Program Files \ ODEON \ JAF and run the driver installer Nokia Flashing Cable Driver_8.6.0.2.msi(firewood is required)
  3. Add the keys to the registry for the program to work correctly: ODEON.reg and flash.reg(by double clicking on them and agree to make changes to the registry), they are in the folder Registry keys.
  4. File jaf_nok4models.ini copy and place it along the path: C: \ Program Files \ ODEON \ JAF(asks for a replacement, we agree), it is in the folder INI file of phone models.
  5. Before flashing, make a hard reset (*#7370#) . The default password is 12345
  6. It is necessary to delete all system folders from the card ( patches, installs, private, resource, sys, system) or just format it.
  7. It is imperative to close the Nokia programs (PC Suite, Ovi Suite).
  8. We turn off the phone and connect it via a USB cable, but don't turn it on. (USB is inserted into the motherboard, the one on the back, otherwise it will give an error)

Step 3.

  1. The following actions are performed by owners of OS Windows Vista and Se7en:
  2. We follow the path C: \ Program Files \ ODEON \ JAF right-click on the file JAF Emulator.exe, select the item Properties, go to the tab Compatibility and choose compatibility with Windows XP SP3

Step 4.

Step 5.


Addendum: I have a very low Internet speed, so I can't upload J.A.F. here, but I'll give you a link: narod.ru/disk/35567208001/JAF.rar.html

If you do not understand anything, write in the comments, we will decide.

Did you like the article? To share with friends: