Why does the computer heat up. Why is the laptop heating up: causes and solutions to the problem Why is the RAM heating up

But in any case, this is only a temporary solution to the problem, and either you do not value your data, or you are lazy. Therefore, the most correct solution is to disassemble and clean from dust.
If you do not know how or are afraid, then it is better not to poke your nose. Because after that it may not turn on at all.
From myself I will add only that I recently dismantled and cleaned the laptop. Replaced the thermal paste and cleaned the "passage" in the vents. As a result, the laptop began to heat up much less (earlier, the hand was already “burning” near the “air outlet”) and became almost silent (well, the poor cooler (fan) tried its best to spin faster to push hot air through this layer of dust).

Miniaturization is an inevitable process in the evolution of comfort. A compact device is always easier to transport. If you need to have constant access to the functionality of the device, its size is of great importance. Despite the progressive capabilities of laptops, the device also has a number of disadvantages. The main problem is voiced in the question: “Why is the laptop heating up?” If you are interested in information about the probable causes that increase the temperature of the device, and you want to know how you can eliminate such “iron inflammation”, then the material presented in this article will be as useful as you can correctly put it into practice.

Lack of free space and its consequences

Notice how much smaller a portable computer is than its desktop counterpart. However, the power and performance of the "baby" can be several times higher than that of its "giant opponent". However, the time factor always dots the i... One way or another, a device used for a long time (especially when all the hardware resources of a computer are involved) will inevitably start to warm up. The extremely dense neighborhood of components in the inside of the case is an incredibly favorable environment for increased heat transfer. Question: “Why is the laptop getting very hot?” becomes especially relevant if, in addition, the user is placed on the couch. In this case, the soft upholstery of the headset becomes a kind of additional barrier for the much-needed air cooling system. Why is that? The main limiter is usually the casing of the device, the ventilation holes of which sometimes cannot provide sufficient air circulation. How to avoid the negative effects of heat and what to do to ensure that the laptop works with a "cold calculation" - read the material below.

Why a laptop gets very hot: case flaws

The iron "organism" of your electronic device, as a rule, frames the plastic case. In the event that a laptop model is involved in budget-class technology, the risk of overheating of internal components increases with each slightly incorrect operational action. For example, using a laptop on your lap or working the device on a soft surface is obviously wrong. When you work on a laptop in a dusty room or in high humidity, be aware that negative consequences cannot be avoided. Incidentally, the cold environment also has a devastating effect on the laptop as a whole. It is reasonable to assume that the question: “Why is the laptop heating up?” it might not have been if the user was aware of all the operational nuances.

What will the seller not say, or What is the manufacturer hiding?

First of all, it should be remembered that a laptop is a portable device that can function autonomously, without being tied to a power supply. However, if you use a laptop as a desktop PC, then you should not forget that “long straining” of the device can be fatal for the device if the user ignores the tactilely felt effect - a hot case. Even if you were assured that the laptop was made taking into account all operating conditions, do not believe it - you are being misled. However, some modifications of portable computers are indeed adapted for use in extreme conditions. Nevertheless, even happy owners of reliable devices may have a question: “Why does the laptop heat up and turn off?” Developers and manufacturers of portable computer equipment can assure the authoritative competence of their "brainchild", but the temperature fact remains inevitable evidence: everything is subject to the destructive influence of high temperature. Therefore, it makes sense to constantly monitor the "degrees" of the components of a long-running system.

Top "hot" problems and how to fix them

So, why is the laptop heating up and shutting down? Let's look at the main reasons for this phenomenon, and at the same time we will understand some of the technical nuances and design features of the laptop.

Problem #1: Dust Exposure

As already mentioned, computer components are “constrained” by the framework of the framing structure, so to speak, by a protective shell. This part of the device can be made of different materials. Various polymers, metal frames made of steel and even titanium in use allow you to give the laptop a different level of reliability. Many of the materials have an incredibly efficient ability to absorb heat. However, open areas and air intakes are most exposed to the constant effects of the external environment: dust, moisture, etc. Often the user has a question: “Why does the laptop get so hot?” Most likely, a critical accumulation of microscopic debris has occurred inside the laptop. Dust particles are compressed around the cooling cooler and block the inlet / outlet of air with their quantitative mass. As a result, the fan lubrication becomes clogged, and friction creates an unpleasant effect of third-party noise.

Remedy #1: Surface Cleaning

As a rule, such troubles are resolved by elementary preventive actions:

• The outer openings of the air channels are freed from dust deposits using an ordinary construction brush for painting.
• You can use a household vacuum cleaner.
• In some cases, in order to correct the situation leading to the question “why the HP laptop is heating up”, it is necessary to dismantle the protective cover of the case, which covers the direct location of the cooling fan.

Attention: the implementation of the last paragraph deprives the user of the manufacturer's warranties. Since unauthorized access is a violation of operational rules.

Remedy #2: "Through the lid to the target"

If the warranty period has expired, then the user has every reason to independently restore the cooling system to working capacity. Except for contacting a specialized service center.

• Turn the laptop over and use a screwdriver to unscrew the screws of the cover, which is usually located in the upper case, on the left (rear view).
• After dismantling the protective element, use the same brush (see above) to clean the contaminated area. It is worth noting that in a situation where the question is as follows: “Why does the laptop make noise and heat up?”, Superficial “cleaning” is not enough - you need to lubricate the fan. In some cases, it is advisable to replace the cooling cooler.
• After completing the "sanitary" work, install the cover in its original position, initially making sure that there are no extra items in the niche that you have cleaned of dust.

As a result of the fact that the cooling system ceases to fully function, it often happens that in the process of working in the Windows operating environment, the computer “freezes” or simply turns off. In the first case, perhaps the system does not have enough RAM, in the other case, there is a violation of the temperature regime. An emergency shutdown is triggered by the BIOS service.

Remedy #1: Polluted RAM

To clean the installed RAM lines from dust, you also need to open the corresponding protection plate. It is usually located in the middle of the casing and is fixed with two screws. Open, clean and replace the cover. In some cases, you will need to "build up" the potential of RAM - adding memory.

First of all - diagnostics

Often, access to the central processor is somewhat difficult and is associated with the immediate moment of dismantling the body parts and even some of the add-on modules of the system. Therefore, it is advisable to carry out equipment diagnostics in order to make sure that there are grounds for a labor-intensive process. Indeed, sometimes a visual analysis can indicate the real reason why the laptop began to warm up. It is not difficult to carry out such a check, for this it is enough to enter the BIOS and see the current temperature readings of the processor in the corresponding menu. There are also standard Windows tools that can be used to verify that the CPU is operating normally. In other cases, dismantling cannot be avoided.

Elimination method number 2: a substance on which a lot depends ...

The operation of the processor is accompanied by high heat dissipation. If the cooling system is not functioning properly, then the thermal paste dries out. The mentioned substance serves as a kind of layer between the CPU die and the heatsink, which absorbs the heat coming from the processor. As you understand, to replace the thermal paste, it is necessary to remove the cooling part and clean the contact surfaces from traces of the dried substance. It should be taken into account that the component involved in heat transfer is superimposed evenly, in a thin layer, and in no case goes beyond the boundaries of the processed planes.

Problem #2: Hot video effects and resource intensive software

Software, and in some cases, multimedia material, is often the cause of the question: “Why is my laptop heating up?” First of all, pay close attention to how the graphics card works. When the graphics are displayed on the screen, the processor starts to “strain”, and if the user has downloaded a modern toy to his portable device, the system will use all its resources, and then the hardware potential is laid out to 100. High performance requires more energy consumption, hence the increase in heat dissipation system components. Of course, you know that a powerful graphics card needs effective cooling, and that the GPU, like the CPU, has a fan cooler. Of course, the fan blades and the discreet heatsink can become clogged with dust. In this case, there is a risk of overheating of the video card parts, and the question: “why does the laptop heat up when you play” requires immediate resolution.

Remedy number 1: software "troubles"

A lot of simultaneously running software can also cause your computer to overheat. It would be better if you disable some applications. Firstly, you will significantly increase the performance of the system, and secondly, you will not overload the hardware of your laptop.

Workaround #2: Discrete Cleanup

As a rule, the graphics module is located in close proximity to the air channel grilles. Therefore, it is not difficult to calculate the exact location of a discrete video card. By unscrewing the appropriate screws, you can dismantle the protective cover and clean the part from dust deposits.

Finally

So, we examined why the laptop is heating up. However, the issue cannot be considered closed without discussing one more important point. The fact is that another cause of the problem of interest to us may be the laptop battery. To verify the reliability of suspicions, it is enough to use a special utility or contact a specialized workshop in order to diagnose and receive recommendations. Do not forget about a simple operational rule: a laptop computer during operation should be located on a flat surface of the table so that nothing prevents air from entering the inside of the laptop. As you have probably seen, there is nothing difficult in understanding and resolving the problem we are discussing. Timely preventive actions will help you prevent the negative consequences of such a property of the unit, and let the systematic temperature monitoring of the laptop become a mandatory rule for you. Productivity to you and successful service!

Many PC users often turn to the repair shop with the same question: “Why is the computer heating up?”. Let's try to determine the main causes of this phenomenon, and how to eliminate it.

Main problems

A personal computer or laptop is a complex system that operates according to certain laws. If you are interested in why the computer heats up and turns off, we will deal with the main reasons for this deviation. Overheating is often accompanied by a system shutdown. In addition to the termination of work, the following problems may also be observed:

• programs hang, games do not start or turn off after a few minutes from the moment of launch;
• the system stops and turns off;
• permanent after launch everything "hangs".

One of the important elements is the PC processor, so if you figure out why it heats up, it will become clear why the computer turns off. Consider the main components of a personal computer, and for what reasons problems arise.

Breaking the computer apart

It is not difficult to understand why the processor on a computer is heating up. This usually starts when complex programs are turned on, or if the computer is regularly turned off incorrectly. This may lead to degradation of the chip. If measures are not taken in time, it will constantly give errors, and after a while it can simply be thrown away. The same will have to be done if you do not find out why the video card on the computer is very hot. If your personal assistant starts to “freeze” for a long time when you are watching a movie, or during the game the image becomes fuzzy, a dark background or other graphic artifacts appear, your video card will soon say goodbye to you.

No less problems will arise if the user does not understand in time why the hard drive on the computer is heating up. You need to start worrying if the PC takes a long time to boot, clicks are heard from the side of the system unit. If the system does not boot, then it's too late, it's time to change the hard one. It should be noted that in this case you can return the information that was stored on it, but you need to contact a good service center. It’s impossible to find out why the computer is getting very hot, and the hard drive has flown, but it will be quite possible to return important data.

Many repair shops advise you to find out in advance why the power supply to the computer is heating up. This part can fail very quickly, so at the first malfunction, you should contact the repair shop. Computer repair in Elekstrostal is inexpensive. Troubleshooting will cost significantly less than buying a new system unit. In conclusion, we recall that the chipset on the motherboard is no less important. To the question: “Why is the motherboard on the computer heating up?” can be answered very simply. The cooler in the PC does not work well enough, so the keyboard may turn off, the mouse freezes, the USB input does not work, there is no communication with disk drives, hard drives, and other problems. If the computer gets very hot during the game and the main reason is not eliminated, the chipset will break, and the motherboard will have to be purchased new. Repair in such a situation is impractical, because it is too expensive.

There are quite a few reasons why the RAM on the computer and other components are heated, but the main one is that the radiators are not cooled well enough. If you have problems with the normal operation of your PC, it is better to immediately contact the professionals.

What is a laptop? This is a portable portable computer that works equally well anywhere and on any surface.

Sometimes this feature plays a cruel joke with the device. Due to the abundance of dust in the air, the laptop heats up and does not turn off.

The general layout looks like this:

The diagram, which is typical for the vast majority of devices, shows where the key components are located:

1) central cooler;

These elements are responsible for the performance and speed of work in general. If the laptop, over time, began to overheat and "slow down", then the matter is not limited to reinstalling the OS.

The problem is mostly hardware. In other words, the laptop is clogged with dust that needs to be cleaned.

Dust in the system

Important! Before disassembling a laptop, be sure to watch related videos on the Internet. They detail the sequence of removing components, talking about the "pitfalls" of the assembly, hidden plugs and more.

A dusty cooler often works very noisily and angrily. It looks like this:

As you can see, he is simply not able to draw in air, because the radiator is simply clogged.

Here is the overall picture:

All dust is carefully blown out, after which the board elements are carefully cleaned with a soft bristle brush so as not to damage the delicate parts of the boards and microcircuits.

In the vast majority of cases, regular cleaning saves you from many problems, and the machine starts to work as before.

thermal paste

There are times when regular cleaning does not give the desired effect. Most likely, the thermal paste simply dried up in the system due to the increased temperatures of the processor and video adapter.

As a result, the laptop heats up.

What is this paste?

This is a multi-component composition, which is a "layer" between the central computing chip and the cooling surface, to which heat pipes are connected.

It prevents overheating of the elements due to the special composition.

In the screenshot, the cooling plates look like this:

Well, this is the appearance of the processor with a dried layer of paste.

It is necessary to clean off the old "cooler" very carefully, in no case using sharp objects.

Otherwise, you can damage the integral structure of the central chip or video card, which is fraught with more serious damage.

Carefully scrape off the hardened compound using a wooden or plastic stack, and clean the residue with a cotton pad moistened with acetone.

Nail polish remover will work too. So you also degrease the surface.

The thermal paste looks like this:

To apply a new layer, squeeze a small amount of compound out of the tube and use a plastic card to carefully spread the contents over the entire surface of the chip.

The layer should not exceed 1 mm. Otherwise, the cooling system plate will not fit snugly against the elements, and the paste itself will dry out quickly.

If that didn't help either:

You cleaned the contents of the laptop from dust, changed the paste to fresh, but the problem has not yet been solved. First of all, pay attention to the work of the cooler.

It is possible that its resource has already exhausted itself, and the fan needs to be replaced.

There are also laptop models that initially get very hot after a long "hard work": video editing, graphic editors and other resource-intensive applications.

Or the cooling design is thought out very mediocre.

Another option is a factory marriage.

Prevention of overheating

To protect yourself from dust getting inside the system, it is enough to follow a few simple rules:

1) do not put the laptop on the sofa and other soft surfaces;

2) periodically clean the ventilation system;

3) avoid dusty rooms;

4) regularly wipe the desktop on which the computer lies.

If you are not satisfied with the stock cooling, purchase an additional stand that will provide a more intense flow of cold air. It looks like this:

Its design has one or two large-diameter coolers that blow over the lower area of ​​the device.

Test software

The temperature regime of key components can be tracked not only tactilely by placing a hand on the laptop lid, but also programmatically.

Let's look at the example of the last representative. To do this, you need to download the product, since it is distributed free of charge, but only for 30 days.

At the end of the trial period, you will need to enter a license key. But the trial version also copes with its tasks.

After installation, we launch and see the following picture:

To find out the temperature regime of the processor and other elements, double-click on "My Computer", and select the "Sensors" item in the drop-down list:

The current information about the current state of the hardware is displayed on the screen. It is updated in real time, so all data will always be up to date.

If the temperature exceeds 60-65 degrees, this is an occasion to think and take appropriate measures.

Or turn off the laptop for a while so that it has time to cool completely.

Why does a laptop, processor or video card overheat. How to fix it.

The laptop, processor, video card or PC is very hot. How to fix it. There can be many reasons for overheating of a PC, video card, processor or laptop. The main one is dust in the cooling system.

In this article, I will talk in detail about how to identify problems with RAM. We will also figure out how to repair and replace RAM on the example of a PC, laptop, and on the examples of Windows and Linux.

I will try to describe everything in detail and clearly. Therefore, beginners will be able to figure it out, and experienced users will find something interesting for themselves.

Terms:
RAM is the official name for random access memory.
A RAM stick is a microcircuit that is RAM.

How RAM can get corrupted

RAM is a microchip inserted into a special slot in your computer or laptop. Naturally, a computer has more RAM, and a laptop has less. A stick of RAM is the most reliable piece of hardware in your computer or laptop. According to statistics, they are the least likely to break, and therefore the warranty period for them is longer (on average - 4 years).

This is due to the simplicity of the microcircuit. It practically does not heat up, and therefore it does not need a cooler (fan). In rare cases, a radiator is put on the operating room for cooling, but this is usually found on powerful gaming computers. In addition, the heatsink makes the RAM bar structurally stronger.

RAM can only be damaged physically. Those. no virus or software problem has yet been able to corrupt RAM. Therefore, the most common causes of failure are:

1) Manufacturing defect.
2) Problems with the power supply.
3) Mechanical damage to the RAM strip or connectors.
4) Static stress.
5) Simple wear.
6) Overheating / hypothermia.

Manufacturing defect is rare. In 1% of cases, and it does not depend much on the manufacturer. This is due to the fact that all microcircuits are tested by the manufacturer. In addition, the warranty period for RAM is long. Therefore, it is enough just to go to the service center and change the RAM bar under warranty.

Problems with the power supply are rare. There are controllers in the power supplies and motherboard that do not allow you to output more voltage than expected. However, there are cases when it is a power failure that spoils the RAM. Unfortunately, this can only be checked with a voltmeter, which most people do not have at home (and in vain). If the problem is in the power supply, then you will have to replace it.

Mechanical damage is the most common case. This usually happens when you try to insert a stick of RAM by force. Sometimes it is not the chip itself that is damaged, but the connector.

Static voltage is extremely rare. In my practice, I have never encountered this. The system unit of the computer and the laptop case are always closed, and therefore static electricity is excluded. In addition, in modern devices there is an antistatic mesh under the motherboard. However, static electricity can be a threat. For example, if you walk on the carpet in rubber slippers, and then climb your hands into the "innards" of the computer.

simple wear happens over time. Nothing in this world lasts forever. The bar of RAM can deteriorate both after 4 years and after 15 years. It all depends on the operating conditions and the manufacturer.

Overheating or hypothermia It can also destroy RAM. But this rarely happens, since absolutely prohibitive temperatures (+ 100C, -45C) are required to ruin the microcircuit. Clean your computer and laptop from dust and everything will be fine.

How to fix corrupted RAM

No way. If the RAM bar is damaged, then it is almost impossible to fix it. If the matter is in the connector or the contacts are worn out, then something else can be done. However, the microcircuit itself cannot be repaired in any way, it can only be replaced. Luckily they are inexpensive. 2GB at 1600Hz cost around 1500 rubles, which is quite a bit, given the warranty period. Just try not to buy RAM with a warranty of less than two years.

However, don't be afraid. Problems can be solved.

What are the signs of a memory defect?

General signs:
1) The system does not start. Or it starts endlessly rebooting itself, trying to start normally.
2) The system does not start at all. Usually accompanied by squeaking. This means that the RAM has not been determined at all. This means either very bad damage to the RAM strip, or damage to the connector.

Windows:
1) The blue screen of death crashes. Blue screen with technical information. The error code is most often different. That is, it makes no sense to google the error, because. the codes are always different and always show a different reason. Sometimes this happens due to the fact that the RAM stick is not fully inserted.
2) Failures in the system. This is usually associated with programs and games that actively use RAM. A vivid example: programs, browser and games crash with a system error. Sometimes accompanied by a blue screen crash.

linux:
1) System crashes and program crashes. Sometimes it turns out funny. You go to the browser, it crashes with an error, you try to view the error report, but it also crashes with a system error. Even if you look at the logs, it is still not always immediately clear what the problem is. Common to all debian-derived distributions.
2) The system does not boot. Crashes to the console or writes an error. Although some who use Arch or LFS may have it as intended :)

How to check RAM for defects

The easiest way to check RAM is to download and install on a USB flash drive or CD (does anyone else use them ?!) a special Memtest86 utility.

There is Memtest86, and there is also Memtest86+. The difference between them is small, so you can download any on the official website: www.memtest.org

This archive contains an automatic installer on a USB flash drive. Those. insert the flash drive, run the program and follow the simple instructions. Then insert this USB flash drive into a computer or laptop, boot from it and check the RAM.

If you're on Linux, then Memtest86 comes bundled with images of Debian, Ubuntu, Fedora, and a few others. And also the utility can be launched from the grub menu at startup. If you don't know what grub is, then it's too early for you to sit down for Linux :)

But! Before running the program from a flash drive, you need to do the following.

Step 1.
First you need to find the chip. Make it easy. RAM looks like a rectangular chip. On a computer it is longer, on a laptop it is shorter.

The microcircuit is clamped on the sides with clamps (tautology, yes). The clips are easy to open, and then pull out the RAM bar. But before pulling out the chip...

Step 2
Reset BIOS settings. When the system starts, press Del and the BIOS menu exits. Select the Set to Default option (default F9 or F10). Then save and reload.
This step is optional, but the philosophy behind fixing hardware suggests this step. In some cases, resetting the settings helps the system to work.

Step 3
Pull out the RAM chip and look at its condition. If the contacts are dirty, then take an eraser and gently wipe them along.

Step 4
If you have one bar, then put it in the slot and run Memtest from a USB flash drive. If you have several RAM chips, then leave one, and pull out the rest.

Step 5
After running Memtest, it will immediately start checking the RAM. It looks like this:

In the image, I marked the program zones with color.
Green - the characteristics of your processor (CPU).
Purple - the stage of verification and the percentage of verification.
Yellow - the model and characteristics of your RAM. Remember them or write them down, because if you want to buy a new RAM bar, you will rely on these characteristics.

If the program detects errors, it will mark them in red. Even one mistake is already a reason to replace the RAM.

Step 6
After checking, turn off your computer or laptop. Then take the RAM out again and put it in another slot. Run Memtest again.
If errors appear again, then you need to replace the RAM bar, because. it can no longer be repaired.
If there are no errors, then the problem is in the connector.

If you have several RAM chips, then check each one in turn. If the problem is in the connector, then simply do not use it, or take it to the service to fix it.

Problem solving

If Memtest gives red errors, then your RAM can no longer be cured. Buy a new one.

Of course, if there are not many errors, then you can continue to work with this RAM bar. But as soon as some program stumbles upon a damaged sector, glitches and crashes will begin. If you use Linux and can compile the kernel yourself, then relying on the Memtest86 data, you can build a system that would not use the specified memory areas, avoiding errors.

However, remember! If Memtest86 detected errors in the memory, then the wear process has already begun. So, over time, there will be more errors, until the RAM finally deteriorates.

Replacing RAM is easy. You pull out the damaged chip and carefully insert the new one. In laptops, the RAM stick is inserted and pulled out at an upward angle. Those. you insert the RAM diagonally, and then press it from above until it clicks. And if you press the limiters, then the microcircuit itself will “jump” up.

If you have a laptop with non-working RAM, then it is better to immediately take it with you to the store. There you can ask the consultant to install the RAM in your laptop yourself, if you yourself are afraid. In addition, you can immediately test the operation of the new RAM bar by taking a flash drive with Memtest86+.

conclusions

If you do not understand something or have any questions, then leave them in the comments to this article.

But, in general, testing and replacing RAM is not that difficult. It’s just that ignorance scares away, and therefore the main thing is to cope with fear. After all, computers and laptops are arranged as logically and simply as possible, surprisingly.

Recent tips from the Computers & Internet section:

Council comments:

Hello. This morning, turning on the computer, he squeaks long and repeating many times. Is it RAM? Thank you

When I start the computer, the blue screen "Eror: 0x0000007E" crashes, I think that this is a problem with RAM, although I installed it half a year ago

Hello, it beeps 3 times at startup .. I believed all the contacts, the video card is working .. the RAM strips 2, turned on one at a time and changed the slots ... Before that, it started normally without problems .. What could be the problem, the screen does not react in any way ..

Hello, the child filled the laptop with liquid soap bubbles, after drying it knocks out a black screen where it writes phoenix bios 4.0 release 6.1 copyright 1985-2007 phoenix technologies Ltd all Rights reserved model name extensa 5635 z bios version vo.3216 build time 06.09.09. 18.36 cpu =1 processors detected , cores per processors =2 pentium dual core cpu 30006M system ram passed 1024 KB L2 Cache System Bios Shadowed video bios shadowed fixed disk 0 ATAPI CD ROM Mouse initialized ERROR 0200 failure Fixed disk 0, press f 1 to resume f2 setup

Hello, I have such a problem sitting playing in a laptop, it is without a battery and accidentally pulled the power cord out of the socket, it accordingly turned off and does not turn on, the Caps lock key flashes three times, this is a malfunction of the memory module, I replaced the RAM, but there is no sense, everything is the same, tell me what to do ?? ? Thank you very much!!!

The second RAM slot in the lenovo g505 laptop does not work I insert the RAM I turn on the laptop the laptop turns on the screen is black, what kind of problem explain who knows

The text is quite tolerable, only the RAM bar itself is not a microcircuit, but a circuit (or board), and the microcircuits are those square black things on it.

Good day. I have such a problem: Toshiba laptop - when you start games after some time (10-30 minutes. Sometimes more), the system just gets up and does not react to anything. The same problem when you watch movies online. Tell me what could be the reason

Dude, you're awesome, helped out

Good afternoon Such a question is ripe. I have 4 DDR2 sticks, 2 x 1 gig, 2 x 2 gig, despite the fact that one manufacturer and one frequency. if you put them separately (2 by 2/2 by 1), everything plows, but only on the yellow slots of the mother. and when installing in different slots or installing 4 bars at once, some kind of failure occurs, the system manager beeps incessantly and does not load the system. What to do?

Thanks for the answer, the situation just arose, we are doing repairs, people came two months later and claim that we allegedly replaced the RAM) so I'm trying to figure out what's what))))) the laptop was flooded))

Pavel, no, this is hardly possible. The volume cannot change like this, even if the sectors are damaged. It is possible that your hardware reserves some of the memory. Go to Task Manager - Resource Monitor, and see how much is reserved by the hardware.

Hello, such a question, can the RAM partially fail and show 1 gig instead of 4 gigs, for example, is this possible at all ???

Hello! Please tell me, my RAM is correct for sure, as it was checked on other PCs (intel), but when I insert it into my PC (intel), I have a black screen and one long squeak that repeats, which indicates a malfunction of the RAM. I put dice one at a time and different slots, the same 1 long beep. Also on the motherboard there are 2 swollen capacitors near the processor socket above it and on the left, can this be the cause of the malfunction? Or is it the RAM slots? I hope I explained clearly! Thank you in advance!

Oleg, you can check this. Pull out one bar, and if everything is fine, then most likely something is wrong with the compatibility of the motherboard or processor.