What to do if the application has stopped. Why the app stops classmates. Samsung Galaxy App Stopped: How to Resolve the Issue Without Factory Reset

There is one problem that beginners and advanced Android owners face: a damn mistake "Sorry, (app) has stopped."... It appears when you are using an application and then forces that application to close. Annoying, right? Fortunately, there is a way to fix this problem. Here's how to fix the error "Sorry, the application has stopped."on Android.

Go to solution:

Clear app data

This problem often occurs with contacts, gallery and launcher applications. The correction procedure is usually always the same.

First go to Settings on your device.
Open " Applications "\u003e" Application manager "
Swipe left until you find the " Everything».
Scroll down to the app that's causing the problem and tap on it.
Here you will find the parameter Erase dataand Clear cache.

Clear cache Is the option you should start with. The cache helps applications load slightly faster when they start. Clearing the cache will slightly increase the launch time of the application, but it may solve the main problem.

Data cleansing will delete all application data, including files, settings and accounts, so do not use it if the previous step helped.

Check your SD card

This error can also refer to a damaged memory card. If the memory card is damaged then any applications that write files to the memory card will cause this error.

To test this, simply remove the memory card and launch the application that stopped working. If that works, then the problem is with the map. If this turns out to be the case, you will need a new memory card, but you can still transfer data from the memory card to your computer as a backup.

If you are not using an SD card, proceed to the next step.

Removing and reinstalling the application

If the app is not built-in, you can also try uninstalling it and then reinstalling it from the Google Play Store. Just open the Play Store app, open the menu bar on the left side and tap “ My Apps " ... Find a suitable application and click “ Delete " , after a few seconds, you can install it again.

Turn it off and back on

You can also try performing a soft reset, in other words, restarting your device. It's very simple and quite effective if your phone has been turned on for a long time. A soft reset will power your phone off and on again.

Last resort: perform a factory reset

When the above solutions didn't help, you can roll back to factory settings of your phone. When performing a factory reset, make sure you back up all your data beforehand. I repeat:. A factory reset will reboot your device and return it to factory default settings, removing everything, including any errors. You can quickly restore your apps and data if you've made a backup.

For more information on how to reset your phone hard, check out our guide.

In case Google Play doesn't work, the solution is a little more extensive: first delete the cache, and if that doesn't clear things up, clear the data and finally uninstall the Play Store updates. The same steps apply to Google Play services, but try restoring them one at a time so you don't lose all Play Store settings for no reason.

Did these tips help you solve the problem? What other ways do you know? Write to us in the comments.

If you use any of the mobile brainchildren of the Samsung Galaxy family, then you are probably familiar with all that gamut of vivid and lively emotions that arises when a message suddenly appears on the device's screen that something has stopped in the Galaxy. Here, as they say, we arrived.

In general, they like to stop Samsung Galaxy, moreover, everything: some application is stopped, the process is stopped, then the system interface is stopped.

But we will not talk about sad things, but rather tell you about what to do in case of such sudden stops. so

"Application has stopped" - what does it mean?

Of course, when a user sees such a notification on the screen of his Samsung Galaxy, he at least guesses that some of the active programs have failed.

And that means that it would be necessary to restart it, because such problems, as a rule, are solved in such a simple way.

But what to do if the system writes that it is not just the application that is stopped, but “ Samsung Galaxy has stopped. ", and besides, after the usual restart, the ill-fated tablet appears again, and again, and again ...

Samsung Galaxy has stopped message

In fact, "Samsung Galaxy App Stopped" in this case is purely an example, since, as we said, Galaxy is stopped by anything. Plus, judging by the number of comments on the forums, different Galaxy have recently begun to "delight" their owners with just such a message. Nevertheless, in most cases, the method below can be used to deal with this and other similar "stops".

First, note that the message "Samsung Galaxy application has stopped" (or just some application has been stopped) not only indicates the fact of a software error, but, more often than not, suggests a complete reset of the smartphone (or tablet). It is clear that after such a radical impact, the problem will disappear, but with it the very settings, as well as a lot of important data, which have not been backed up, will inevitably disappear. In other words, solving one problem creates a bunch of others.

But you can go the other way, and instead of a full reset, you can try to uninstall and reinstall only the problematic application and / or clear the cache. This often helps to eliminate these kinds of problems.

Now, in a nutshell, how to clear the cache of a problematic application in Android OS:

STEP 1... Open the settings menu and find “ Application Manager"(If you have not a Galaxy, but another Android smartphone, then in" Settings»Open« Applications«);

STEP 2... We tap the tab " EVERYTHING"At the top of the screen and find the problematic application in the list (in our case," Samsung Galaxy ");

STEP 4... We reboot the smartphone and remember the procedure in case the Galaxy stops something again.

The "Application not installed" sign is probably one of the most common errors on the Android platform. According to statistics, more than 65% of users of the popular operating system often encounter this problem. Why is this happening and how to get rid of the annoying error? Let's try to figure it out! First, we need to determine the reason for its appearance.

Common reasons:

1) The user made a mistake while installing the selected content

2) The developer did not have time to properly test his creation

3) Failure of the device - viruses, application conflicts, insufficient memory

4) The program does not match the specifications of your device.

So, we figured out the reasons. Now let's go directly to the solution. To begin with, we need to decide which of the four points is most appropriate for this particular situation. If everything is relatively clear with points 2 and 4, then the other options are perfectly treatable.

Problem solving:

1. Go to the "Settings" section, select "Application Manager", click on the tab with our program and delete all data. We try to install again.

2. We reboot the device. We are cleaning the RAM and physical memory. We get rid of unnecessary applications and remnants of incorrectly deleted content. Trying to install again.

3. Often the sign "Application not installed" appears for users who want to download an application that is already on the device, but has an earlier version. In this case, we need to get rid of the old version and everything associated with it. Reboot, try again.

Even if Android is amazing, it is not 100% stable. From time to time you may run into some problems, small and large.

One such problem is the pop-up notification on the screen saying. This problem usually occurs while the application is running or in use, resulting in data loss. Here are some methods you can use to fix this problem.

1. Soft Reset

Sometimes the application stops working on a one-time basis, and performing a soft restart will help solve this problem. Soft Reset means to turn off the device, hold it off for a few seconds, and then turn it on.

As electronic devices, smartphones are prone to problems. Sometimes a simple Soft Reset can fix the problem. It is recommended (but not required) to restart your smartphone at least once a day.

2. Forced stop

Force stop means to force close an application in case it does not close or does not behave as usual. Forcing an application to stop kills any process associated with it. Here's how to force the application to close:

Go to "Settings" of the phone
Go to "Applications"
Find an app that behaves strangely or closes by itself
Open it
Click "Force stop"

Your application should now work fine.

3. Delete application cache or application data

Sometimes clearing the application cache can fix the problem. To delete the app cache, open the app in the app manager and tap on "Clear cache".

If the problem persists, try deleting the app data. Deleting app data will also clear the app cache. Deleting app data can erase all data stored in the app, so make sure you have a backup of your data. To delete application data, open the application in the application manager and click on "Clear data".

4. Removing and reinstalling the application

Sometimes, uninstalling an app and reinstalling it from the Play Store can also fix the problem, given that the app is not a system app.

5. Clearing the system cache

If this problem occurs in multiple applications, that is, multiple applications stop on their own, you may need to clear the system cache. Here's how to do it:

Turn off your phone
In this step, you need to enter recovery mode, the login method may be different depending on the device model, for example, Samsung allows you to do this with the following key combination: press simultaneously Volume Up + Power + Home Button
If you did everything correctly, you should be taken to the recovery mode menu
Use the volume key to switch between menu sections. Find "Wipe Cache Partition"
Press the power button to confirm the action
Once the cache is clear, select "System Reboot", press the power button again

6. Factory Reset

If the above methods do not solve the problem, you may have to perform a factory reset.

Please make sure all your data is backed up before performing a factory reset, as you will lose all data after a factory reset.

To perform a factory reset, go to your phone settings, then to "Archive and reset", which is in the subheading "Personal" or "Accounts" (each has a different value), then click on the button "Data reset"... This should probably fix the error "Sorry, the application has stopped.".

Simple ways to fix the "Sorry, the application has stopped" error
"Sorry, the application has stopped" is a very common error on Android devices, and there are many factors that can cause it. We will bring five ways solutions to the problem and hope that at least one of them will help you get rid of this error on your Android device.

Method 1. Reinstall the application
We suggest that you reinstall the application as the first solution to the problem. It makes sense to apply this method if the error pops up only when working with this particular application, and not with a number of programs installed on the device. First, uninstall the app that is causing the problem and then reinstall it again. Check if you managed to get rid of the "Sorry, the application has stopped" error.

Method 2. Remove newly installed applications
Sometimes newly installed applications do not support the software or hardware of the device and thus must be removed from the device memory. This will eliminate the error if it is caused by the applications themselves.

Method 3. Clear the cache
Cache files are the main source of errors and problems in the functioning of applications. By clearing the cache, you can fix most of the application problems. To clear the cache, go to "Settings" -\u003e "Applications" -\u003e "Program Manager" -\u003e Select "All" and then by scrolling down to find and select the application that generated the error. Click "Clear cache and data".

Method 4. Cleaning the RAM of the device
Clearing RAM is a good way to get rid of the "Sorry, the application has stopped" error on Android devices. Some applications run in the background using a lot of RAM. Because of them, there is not enough RAM available for use by other applications. This is where our mistake arises. The procedure is as follows: go to Task Manager -\u003e Memory Cleanup.

Method 5. Reset to factory settings (Factory Reset)
If none of the methods above worked, you can perform a factory reset. Some users are very reluctant to use this method, since all data related to applications, all software updates, as well as photos, documents, messages, contacts and personal files saved in the memory of the Android device "go away" along with the device settings.

In any case, before you reset the device to factory settings and try to fix the "Application stopped" error, do not make a backup. To do this, go to the "Settings" section, find the backup function and a menu where you can back up your current settings and application data for later recovery. You can also transfer all the information to your home PC - it only takes a few minutes. After you've saved the backup, you can perform a factory reset (feature at the bottom of the backup and restore menu).

Hopefully, using one of the methods provided here, you will successfully solve the "Sorry, the application has stopped" error on your Android device.

In this post we will talk about how to solve the error " THE APP IN CONTACT IS STOPPED ".

As a rule, this error occurs after installing updates to the smartphone operating system itself or changing credentials and updating the application itself. This error comes out in the form of a refusal to save the data of a new contact.

I will try to help you solve this error. There are two solutions to this error:

Clearing the cache and deleting application data "in Contact".

So, we started: Settings\u003e Program Manager or Applications\u003e Everything\u003e Find it in Contact and open it\u003e Clear Cache\u003e Clear Data…. The whole thing is done. Contacts that have been previously added to the list will not be deleted.

Device date format.

I don't know why, but it is the date format on the device that often causes the error " THE APP IN CONTACT IS STOPPED " and not only him. The solution is simple: change the date format to 24 hours and the app starts working as if by magic.

Settings\u003e Date and Time\u003e Check the box next to the 24-hour format\u003e Restart the device.

Thank you for visiting the Site.
Please leave your Comments or Tips, Subscribe to the newsletter to keep abreast of news

And also share the articles of our site With Your Friends in Social Networks by clicking on the Icon.

Application in Contact has been stopped

In this post we will talk about how to solve the "APP IN CONTACT STOPPED" error. As a rule, this error occurs after installing updates to the smartphone operating system itself or changing credentials and updating the application itself. This error comes out in the form of a refusal to save the data of a new contact. I will try to help you solve this error. There are two solutions to this error: Clearing the cache and deleting application data "in Contact". So, we started: Settings\u003e Program Manager or Applications\u003e Everything\u003e Find it in Contact and open it\u003e Clear Cache\u003e Clear Data .... Everything is done. Contacts that have been previously added to the list will not be deleted. Device date format. I don't know why, but it is the date format on the device that often causes the "APP ...

Mistake " Sorry, the application has stopped»Is found on Android devices such as Nexus, LG, Samsung, Motorola, Sony, whose system has been updated to. It usually occurs when working with popular applications Google Play, Yandex Navigator, Instagram, VKontakte, Hangouts utility and some other frequently used software. Today we will show you how to solve this problem with the help of simple steps.

Simple ways to fix the "Sorry, the application has stopped" error
"Sorry, the application has stopped" is a very common error on Android devices, and there are many factors that can cause it. We will bring five ways solutions and hope that at least one of them will help you get rid of this error on your Android device.

Hopefully, using one of the methods provided here, you will successfully solve the "Sorry, the application has stopped" error on your Android device.

The mobile phone combines many useful functions, including listening to music, the ability to take photos, videos and much more. However, the main function is still the ability to make calls. Having lost it, the phone turns into an ordinary media device. On some smartphones, the message "the com android phone process stopped unexpectedly" is displayed. This leads to the fact that you cannot call anyone, as well as use other standard functions. Users can get rid of "com android phone an error occurred" in several ways, starting and ending with a complete reset or deleting the cache using the file manager.

Causes of occurrence

Usually the process on the device called "com android phone" will be stopped due to incorrect actions on the part of the user. This malfunction can appear in several cases:

during which errors occurred;
Incorrect update;
Installation that contained viruses. One of the most common viruses called systemui can be the cause.

This can sometimes occur due to a crash or cache overflow in the Phone app. Then, every time you try to open the phone book, the smartphone will report that an unexpected stop of the "com android phone" process has occurred. In rare cases, the breakdown is associated with "iron". Then you will not be able to cope without diagnostics in a specialized service.

Try simple at first. For some, this helps and the "android process stopped" message disappears. If that doesn't work, go directly to the next step.

To simplify your life, most mobile phones provide time synchronization with the data of the cellular operator. Sometimes it is this function that causes the "com android phone process stopped" error. What to do in this case? Just turn off this sync. The following instruction will help to do this:

In fact, for Samsung and Sony Xperia phones, this method is effective. If, when you try to get into the notebook, the system still regularly displays an error message, you should try to clear the cache.

Clearing data and cache in the Phone app

Among the Android system applications, there is one responsible for the ability to make calls. It's called "Phone". Occasionally failures can occur in it, due to which the operation of the device with a SIM card may stop, therefore it is necessary to restore the correct operation of this program. This can be done in a simple sequence of steps:

The method works effectively on phones from Sony, Samsung, Lenovo and other manufacturers. Unfortunately, there are a number of cases where even this is not enough.

If the previous method did not help, then you should resort to this technique. It is suitable directly for advanced users, as it includes as well. This is a special menu on android phones, with which you can, or restore the system.

Each phone has its own key combination that allows you to enter recovery mode. In most cases, the following sequence of actions will help you get to this menu:

Turn off your phone.
Press the power and volume up buttons at the same time.
As soon as the smartphone starts to turn on, release the Power button, but hold "Volume up".
When you see the menu, release the volume key.

You will also need a special file manager called Aroma File Manager to complete this procedure. It allows you to create, delete and rename directories in the system, as well as cut and copy various files. For the program to work, the phone must have Root rights.

Let's find out how to fix the problem "there was an error in android phone settings". To do this, you should consistently complete the following points:

This method will help completely clear the temporary data of the application without using a standard interface.

Installing "dialers" from the application store

A temporary solution may be to install a third-party program that allows you to make calls. You can find similar programs in the official Play Market application store. Programs such as WePhone and Phone + are very popular.

They have a wide interface and can completely replace the standard "Phone". However, they all have one drawback: some features are paid or available only for a certain period. In addition, there are a lot of ads in applications, which creates some inconvenience.

You can download the program using Wi-Fi or via a computer. Then the downloaded apk file should be downloaded to the phone using USB and then installed. Be sure to read reviews from other users before downloading any apps. This will help to avoid low-quality software that may contain viruses.

Extreme measures

If absolutely everything does not help, and you do not want to use third-party software, try it. This will mean that all user data will be deleted and the settings will be reset to those that were preset at the factory. You will lose all your contacts, applications, accounts and passwords to them, multimedia data.

Therefore, it is recommended that you back up all important data before this procedure. This can be done using special applications or simply by transferring all photos, videos and other files to an SD card. In some models there is a special menu item in the settings - "Backup to SD card". There is also a menu for recovery.

To perform a hard reset to factory settings, you need:

The phone will then “Hard reset”. In almost 90 percent of cases, such a reset solves any software problems in the operating system. A reset can also be performed using a dedicated service code. You can find out the combination for your phone model on the Internet. Once you know it, you should turn on the dialing field, and then enter this set of numbers and symbols.