Connecting a TV set-top box to a beeline router. The use of IPTV on the example of Home digital television “Beeline. What do we see in the box

Many owners of mobile devices do not even suspect that their smartphone or tablet can be used as a TV and enjoy their favorite programs at a convenient time. In the queue, in a traffic jam, on the road - with the Beeline Mobile TV service, many popular channels are available, both Russian and foreign, some of them in HD quality, and all you need to watch is Internet access.

What is Beeline TV and how to use it?

More than 100 channels are offered to users of Beeline mobile TV, of which 22 show programs in HD quality. For subscribers not connected to Home Internet and Beeline TV, only the "Etheric" package of 26 free channels is available. For home Internet users and Beeline TV, several packages are available with a different set of channels.

Connecting and watching mobile TV from Beeline is possible throughout Russia, the most important thing is to be on a 3G / 4G network or wherever it catches Wi-Fi. Beeline TV service is not available in international roaming. The undoubted advantage of mobile TV is the ability to remotely record TV programs on a home set-top box, even when you are far from home, and also use a phone or tablet as a remote control when watching programs.

While watching Beeline TV from a mobile phone, traffic is always consumed, according to the terms of the tariff plan, in contrast to the service with the application "", when using which traffic is not taken into account.

Conditions and tariffs for mobile TV Beeline

As mentioned earlier, all owners of Beeline SIM cards, immediately after installing the application and authorizing in it, have access to 26 free TV channels provided by the "Etheric" package:

If they are not enough for the subscriber, he can connect additional ones of his choice. The operator offers the following packages of the Beeline TV service:

• Base
• Basic plus
• Basic for Apple TV
• Basic for Android TV
• Starting

The conditions and cost of connecting packages depend on several factors. For example, to access the Basic Plus package, you need to connect to the Basic tariff for home television and have an active one, which provides favorable conditions for using high-speed Internet throughout Russia.

Users of the "Highway" service, as well as the "All" tariff plans, have the opportunity to activate it on one device and share the Internet between two other phones and tablets that work with the operator's SIM card.

The list of channels of each Beeline TV package, the packages themselves and their number may differ depending on the region of connection. For example, 6 mobile TV packages are available for Moscow subscribers on the following conditions:

It should be noted separately the advantageous offer from Beeline - "All in one". Home Internet and TV have been added to the already existing tariff plans of the "All" group. Additional service fees -. As a result, for example, residents of the capital will receive 10 GB of traffic, 2000 minutes of calls to phones of other operators, 1000 SMS; Home Internet speed up to 100 Mbps; 25 mobile TV channels; 135 Home TV channels; free set-top box with the ability to record and rewind programs.

How to connect "Beeline TV" on a mobile phone?

Watching mobile TV is available for all subscribers of the operator, whose devices run on Android 4.0, iOS 7.0 and later versions of operating systems.

To watch mobile TV on a tablet or phone, you need to download the Beeline application of the same name from the AppStore or Google Play:

At the same time, within the framework of one contract, you can install the program on 6 phones or tablets with Android and iOS operating systems. After that, in order to connect the Beeline mobile TV, you should launch the application by clicking on the shortcut on the desktop.

Application management and configuration

At the first launch, the user will be prompted to go through authorization, read the rules. Home Internet and Home TV subscribers can log in using their username and password. Users of Beeline mobile communications in the network coverage area are authorized automatically, and when accessing Wi-Fi, you can enter the Beeline TV mobile application using the login and password from the Personal Account.

After entering, on the main screen, a list of “hot” offers opens in front of the viewer:

When you go to the "Live" menu, the channel opened the previous time will be launched, and during the first launch - the first one in the list. You can switch channels by simply sliding your finger across the screen from left to right and right to left, or by clicking on the menu icon, select from the list.

The TV Channels menu contains a list of free channels, including Russia 1 and Channel One in HD and in normal quality.

Here, by choosing a channel, you can watch the TV program for the near future and announcements to them, as well as set up reminders in order not to miss the most interesting.

By going to the "Remote" section, you can connect the application to the Beeline set-top box for Home TV and set up their interaction.

By clicking on the "Profile" icon, the subscriber has the opportunity to connect to the channel packages that interest him and set up notifications.

The list of packages and the number of channels themselves may vary depending on the broadcasting region and current promotions.

How to disconnect mobile TV from Beeline?

If additional packages were not connected, then there is no need to disable the service - you can simply delete the application or not use it. However, if there are valid subscriptions, then you need to keep in mind that when you uninstall the application from your phone or tablet, the service will not be disabled, this must be done separately.

To turn off the broadcasting of mobile TV to Beeline, Home TV subscribers should go to their personal account and use a special switch to turn off unnecessary options, or call the round-the-clock support phone 8-800-700-8000.

Disconnection is not available for cellular subscribers in the Personal Account. It is best for them to call the hotline at 8-800-700-0611 or 0611 and ask the operators to turn off the option. You can also send a request on the official website with a request to disconnect mobile TV from Beeline or ask for help at the nearest communication salon of the company. The service disconnection will be confirmed by SMS.

Recently, an increasing number of companies offer a full range of telecommunications services. You will not surprise anyone with a package of services that includes mobile communications, home Internet and digital television. Now you don't need to run to different offices and pay a bunch of bills in different banks, as it was before.

The Beeline operator provides many services

Among the well-known and large operators providing such a range of services is Beeline. One of the most demanded of its services is digital home television, the commercial name of which is Beeline TV. If you are connecting to Beeline for the first time, the wizards will configure everything upon connection. But if you are already a home Internet subscriber, you can do it yourself. In this article, we will review and describe in detail how to set up Beeline TV.

Beeline TV features

Beeline TV has standard advantages for such a service:

• viewing up to 250 channels, many of which are in HD quality;
• the ability to choose a sound track and watch a TV channel in several languages;
• a searchable two-week interactive TV program;
• the ability to watch TV on 4 TVs at the same time;
• social applications that can be used with a set-top box remote;
• pause and simultaneous recording of 4 channels, broadcast TV programs in 48 hours, setting the recording time;
• 13 packages of television channels.

Recording function is in demand now

Beeline TV connection

When connecting to an operator from scratch, you need to perform three steps:

1. Check if it is possible to connect the service.
2. Choose a tariff plan.
3. Call and wait for the master.

Considering that the service is provided with a high-speed connection, your home must be connected to the Beeline home Internet network. You can check availability on this page. Enter the street name and house number, after which the program will notify you if it is possible to connect to the specified address. If you already use the Beeline home Internet, you do not need to specify anything. The technical capability is already available. Go directly to the next item.

You need to select a tariff on the same page where you checked the address. Under the page title, mark the services required to connect. In our case, you need to check "Internet" and "Digital TV". Select the tariff you are interested in for the Internet, then for television, click "Details". On the page that opens, click "Add to cart" for each of the tariffs. Please note that you can connect Beeline TV, even using the Internet of another provider. However, you will have to pay an additional 120 rubles. for line maintenance.

Existing subscribers can connect the Beeline TV tariff in their personal account for Home Internet users. Enter your username and password, go to the service order section, connect the desired tariff. After a while, a company specialist will contact you and discuss the details of equipment delivery.

Management and settings

The set of equipment includes an internet cable, a switch, a set-top box and connecting cords. Several connection schemes are available:

• only TV, in which the set-top box is connected to the switch and the TV;
• internet and TV, when a set-top box and a computer are connected to the switch;
• tV + Internet via a router, in which a set-top box is connected to one port of the switch, and a Wi-Fi router is connected to the other port.

The set-top box connects to the TV, if it is modern, using an HDMI cable, or the so-called tulips, if it is old. In the first case, you need to plug the HDMI cable with one end into the output on the set-top box, and the other into the input on the TV. If tulips are used for connection, plug the colored cables on the set-top box and the TV into the connectors of the corresponding color.

Now you can turn on the prefix. With the correct connection and working internet, the firmware update will start. At the first start, the set-top box will be ready for use in about 10-15 minutes.

All control and configuration takes place using the remote control. Through it, you can switch channels, adjust the volume, set the recording time, use social applications, the program guide is also available, and you can even enter your personal account to connect additional packages. Models may vary, so please read the instructions in the box carefully.

Activation of additional service packages

Additional packages can be selected through your personal account. You can get into it on the set-top box or through the website. In the first case, press the "Menu" button on the remote control panel, then go to your Personal Account - Channel packages - Package / channel management and select the package name.

Through the website, follow this link, go to the section Television - Service management - Change channel package - Next. Check the required packages and click "Save". Reboot the STB to activate the package.

Mobile interactive console

Alternatively, you can use your mobile device to control your set-top box. To do this, you need to install the Beeline TV application from the Play Store or App Store. The application can show TV channels via mobile Internet. A television program is available in it. But the main thing for us is the ability to use the application as an interactive remote control. You can change channels, increase or decrease the volume, record or pause the broadcast. The program has many other features.

Can I watch on a computer

A full set of channels can only be viewed through a set-top box. However, you can watch several free public channels on Windows as well. We need the VLC Player program. To find a list of channels, go to the Beeline forum at the link and search. To download, you need to register. Next, launch VLC Player, press Ctrl + L and drag and drop the playlist file. Launch it and enjoy watching. By the way, the player is available not only for Windows, but also for other operating systems.

Conclusion

We examined how the Beeline TV interactive television is connected and configured. We hope we were able to help you. Leave comments and feedback about the service.

Hello blog site readers. The other day I had to face one everyday problem - setting up home Internet and television from Beeline. The fact is that I have an Asus router, which is not standard for Beeline, so all the difficulties of working with it fell on my shoulders. In order not to forget how I did all this, I decided to write this article. Maybe she'll help someone else.

I think everyone is aware that Beeline's connection and setup of home Internet and TV is absolutely free, but there is one BUT: the equipment must be Beeline or recommended by them, which is essentially the same. If you have, for example, an Asus router, then you will have to configure it on your own.

The beeline specialist will only stretch the cable to the router or television equipment, and then poke around yourself. The technical support service will not help either, they generally do not understand technology, but are able to answer some general questions and give standard advice. Usually a conversation with them boils down to the following: “No internet? Reboot your router! ASUS router? !!! Uh, then we can't help you with anything. "

In short, beeline will have to rely only on itself when it comes to setting up the Internet.

Beeline Internet tincture on ASUS router

Personally, I have an ASUS RT-N10, but all routers of the ASUS line are similar in both the port location and the software interface, so if you have a different model, then this manual will work with it.

1. We connect the power supply, turn on the router and connect the cable that was pulled into your house to the blue port with the Internet icon (it goes without a name). Strictly speaking, this is the working state of our unit, now it remains to configure it.

2. We take a network cable with a standard RJ-45 connector at both ends (comes in the box with the router) and insert one end into the laptop, and the other into port # 1 of the router.

3. Go to the router interface. To do this, open any browser and go to 192.168.1.1. You will be asked to enter your username and password, by default they are standard: admin - admin.

4. Great, we are in the software interface of this miracle box with an antenna! We go to the section in the side menu.

5. Select the type of L2TP WAN connection and click "Next".

6. We indicate the username (it is spelled out in the contract) and the password (it is also the password from the personal account on the beeline website, the same one can be restored / changed).

7. Next is the last page with settings. Here we set up the dynamic acquisition of the IP address and automatic connection to the DNS server. In the column "Server Heart-Beat or PPTP / L2TP (VPN)" we indicate: tp.internet.beeline.ru. Next, click "Apply all settings" and wait for execution. After all this, the Internet will appear, but so far only on ports 1-4.

Wi-Fi setup

In order not to run around the entire apartment with a cable, you need to set up Wi-Fi. We return to the main page of the ASUS software interface again, but now we go to the section Wireless network... Here you need to create and configure an SSID for Wi-Fi access. Set up as shown in the picture below:

• We indicate the name of the SSID - hereinafter it will be the name of the Wi-Fi network that you will catch on your laptop or phone.
• Wireless network mode - Auto.
• Channel width - 20 / 40MHz.
• The authentication method is WPA-Auto-Personal.
• WPA encryption - TKIP + AES.
• And be sure to set the Pre-shared WPA key so that neighbors do not use your Internet.

We save the settings, after which you can catch wi-fi and use it safely.

Setting up beeline television on an ASUS router

It remains to set up only Beeline television. The beeline set-top box connects very easily, you only need 3 cables:

1. The power cord is plugged into an outlet.
2. HDMI cable - into the corresponding port on the TV.
3. A cable with an RJ-45 (network) connector in any of the numbered ports of the router - # 1 - # 4.

All this should be done by a beeline specialist, and then quickly retire. Unfortunately, the standard settings of the ASUS router do not allow the beeline television to work normally - after a few seconds of broadcasting, each of the channels hangs (freeze frame effect). To avoid this, you need to configure the port of the router to which our television is connected.

Goes back to ASUS interface, now we need a WAN section. Here you need to manually change only the first 3 options, leave everything else as it is (do not forget to check the username and password from the Internet just below in the settings).

• WAN connection type - dynamic IP.
• Selecting the IPTV STB port is the port to which the beeline television is connected.
• Enable UPnP? - no (my standards work if you put "no").

Now the problem of freezing frame on any of the channels is solved.

That's all for today. I hope this article will help you set up beeline internet and TV on your ASUS router. Thanks for your attention, friends!

Today I will tell you how to connect the most popular models of Asus routers to the Internet from the Beeline provider and configure popular network services such as DC ++, uTorrent, IPTV, etc.

Connecting network equipment: how to properly connect a router, switch and set-top box (IPTV)

If you do not have other network equipment, connect the main network cable (Internet connection cable entering the apartment from the entrance) to the WAN (Internet) port of the router and connect any LAN port of the router (yellow) with an additional network cable (patch cord) and computer.

If your home network also has a switch (switch) that distributes the Internet to other devices directly, then connect the main network cable (coming from the entrance) to any of the switch ports, connect the WAN (Internet) port of the router and the switch with one patch cord , and others - any LAN port of the router and the computer on which you will further configure.

How to enter the router web interface for configuration

Open any browser installed on your computer (for example, Google Chrome, Internet Explorer, Mozilla Firefox, Opera, Safari) and enter the address in the address bar 192.168.1.1 and press Enter.

If the settings are correct, check the wiring diagram again, pull out and firmly (until you hear a click) plug in all the network cables, restart the computer.

When the router prompts you to enter the login and password to access the web interface, enter in both fields admin.

Configuring the connection of the router to the Internet

• select a folder on the left, then WAN (Internet);
• wAN connection type ( WAN Connection Type) - select L2TP.
• enable WAN ( Enable WAN) - select YES ( YES);
• enable NAT ( Enable NAT) - select YES ( YES);
• enable UPnP ( Enable UPnP) - select YES ( YES).
• circle YES ( YES) item Obtain WAN IP Address Automatically ( Get the WAN IP automatically?).
• circle YES ( YES) item Connect to DNS server automatically ( Connect to DNS Server automatically?).
• username ( User Name) - enter in this field your login, and in the Password field ( Password) — password.
• Heart-Beat Server or PPTP / L2TP (VPN) ( VPN Server) - enter tp.internet.beeline.ru.
  Enable VPN + DHCP Connection - specify Yes
• click the Apply button ( Apply).

Wait until the router reboots, after rebooting the router will automatically connect to the network (1-2 minutes).

Establishing a wireless connection (Wi-Fi) between the router and the computer

• click on item Wireless Network and go to the tab General.
• SSID - enter the name of the wireless network.
• in step Hide SSID (Hide SSID) - select "No" (No). After all the settings, you can select "Yes" for security.
• Channel (Control Channel) - Auto (Auto).
• Wireless Mode - Auto (Auto).
• Authentication Method - WPA2-Personal.
• WPA Encryption- AES.
• WPA Pre-Shared Key - enter the password to access your wireless network.
• Click the button Apply.

Wait for the router to save the settings (a couple of minutes), after which you can start using the wireless network.

Setting up IPTV | Beeline-TV

• select a folder on the left Advanced Settingsthen item LAN (Local Area Network)and go to the tab IPTV.
• in step Select IPTV STB Port (Choose IPTV STB Port) - select from the list the port to which the set-top box will be connected. If there are several set-top boxes, then you can choose a pair of ports.
• click Apply

Configuring access to local resources

For example, let's take a couple of popular programs that require additional settings on the router. These are programs and DC ++... The program interfaces may differ from those that are installed on your site. First, we will configure the programs themselves, then we will configure the router.

Setting up uTorrent

Setting up a torrent client is only necessary in case of problems with downloading torrents. Test the operation of the uTorrent program right after the initial setup of the router, you may not need to configure anything.

Setting (Options)then item Configuration (Preferences).
In the window that appears, go to the tab Connection.

Port used for incoming connections select either default or using the button To generate.
It is undesirable to set the port number manually, as it may turn out that the port will be specified that is already used by another program or another process. In this case, nothing will work.
In this example, the port will be considered 14800 .

Randomize port each start — unchecksince all settings will be useless.
C. Add Windows Firewall Exception — check the box.
UPnP forwarding (Enable UPnP port mapping) — uncheck.
Leave the rest of the settings as default.
Click Apply and then OK.

Read more about configuring torrents on a router in this article.

DC ++ setup

Open the program, in the program menu select Filethen Customization... In the window that appears on the left, select the tab Connection settings.

In step "On. automatic detection of the type of incoming connection " — uncheck.
Put a dot in front of the item " Firewall with manual port forwarding ".
Specify any value opposite the TCP and UDP port settings. It is advisable to choose a value between 1025 and 65535, again considering that some of the possible ports are already in use.
In this example, ports will be considered 15800 .
External / WAN IP - enter the IP address assigned to the router. You can view this address on the main page of the router's web interface. “Client” addresses in our network always start with “10”. The address in the screenshot below is for example!

Click OK.

The rest of the DC client settings can be found here. Do not pay attention to the first picture.

Setting up a router

Go back to router settings

Select a folder on the left Advanced Settingsthen item WAN (Internet), on the right in the main part, select Virtual Server (Port Forwarding)

Enable Virtual Server - put a dot opposite the item Yes;
Service Name - specify for which application this rule is created;
Port Range - specify the port number to be forwarded. It is desirable to specify the same as in the Local Port field. In our example, these are ports 14800 and 15800;
Local IP - enter the IP address of the computer on which uTorrent and / or DC ++ are installed (s). In our example, this is the address 192.168.1.10;
Local Port - specify the port number to be forwarded. It is desirable to specify the same as in the Port Range field. In our example, these are ports 14800 and 15800;
Protocol - select from the list BOTH.

After specifying all the data, click Add (+)... Add additional rules for other programs if necessary. After adding all the necessary rules, click below Apply and wait for the router to reboot.

In this manual, we will consider in detail all the steps that will help you configure the D-Link DIR-300 NRU Wi-Fi router, hardware revision B7 for "Home Internet Beeline". The guide will explore the following steps:

• Preparing for configuration, connecting a router, information on updating the firmware, whether it needs to be done.
• The most common mistakes that are made when setting up a router.
• Configuring l2tp beeline connection on DIR-300 rev.B7.
• Setting up a wireless network, how to put a password on a Wi-Fi network.
• Setting up the work of Beeline TV - digital television IPTV.

The process of setting up a router itself is not something that absolutely any user could not cope with if there is a competently and detailed written instruction. This is what I try to write. Go!

Update: if your router has firmware 2.5.11 or 2.15.19 (in general, 2.5.x), and the settings interface is similar to the screenshot below, use this instruction:.

Connecting the router to a computer, preparing for configuration, how to flash the router and is it worth doing

It is not difficult to connect the D-Link DIR-300 B7 Wi-Fi router: just connect the Beeline cable to the Internet port on the back of the router, and connect one of the LAN ports with a cable to the same connector on the computer or laptop from which the configuration will be performed. Plus, turn on the power of the router. By the way, if you do not plan to flash the router (more on this later), then, in principle, all the steps to configure the device can be performed via Wi-Fi - from a tablet or even a phone.

Now about the D-Link DIR-300 B7 firmware: if for some other models of D-Link routers I recommend updating the firmware, then the routers of this modification, as a rule, usually work properly without this process. Thus, you can complete all the settings of the router and turn to the firmware update method only in case of any problems, such as:

• Frequent spontaneous disconnections, which can be "cured" only by restarting the router.
• Low speed of the Internet over Wi-Fi, the router "cuts" the speed.
• Other problems of unclear origin.

Penultimate: if you have already tried to configure your DIR-300 B7, but you have not succeeded, before proceeding, reset the router to factory settings. To do this, with the router powered on, press and hold the Reset button on the back of it for 10-15 seconds, then release it. It will take another 30 seconds to reboot the router with factory settings.

And the last thing: before setting up, disconnect the Beeline connection on the computer that you use to access the Internet. And do not connect in the future - after configuration, the router will establish this connection by itself and after that distribute it over the local and wireless Wi-Fi network to all devices. Otherwise, if you do not disconnect this connection, you will have a question about why the computer has the Internet, but connects via Wi-Fi, but without access to the Internet. And I am very tired of answering this question.

Configuring l2tp beeline connection on DIR-300NRU B7

The main step in configuring any wireless router (Wi-Fi router) is to correctly configure the connection parameters in it. What we will do - in our case, this is the DIR-300 B7 and the L2TP connection type used in Beeline. So let's get started.

Launch your favorite browser and enter 192.168.0.1 in its address bar. The next thing you will see is a request for a username and password to enter the settings of the D-Link DIR-300 NRU B7 router. The default values \u200b\u200bare admin and admin, there and there.

After entering the correct data, you will be taken to the main page of the router settings. However, we will not dwell on it: at the bottom of the "admin" select the link "Advanced settings".

On the next page, in the "Network" item, click on the "WAN" link, then click the "Add" button, regardless of the connection that is already in the list. Now you are on the Internet connection settings page, here you need to enter the correct parameters for the Beeline provider.

The fields should be filled in as follows (in those not mentioned here, the values \u200b\u200bshould not or should not be changed):

• Connection type - L2TP + Dynamic IP
• Username - Your login for Internet access Beeline
• Password - Your password to access the Internet
• VPN server address - tp.internet.beeline.ru

In general, this is all that needs to be changed. After that, click "Save". After that, you will find yourself on the page, which will display the newly created connection in the "Broken" state. Also, on the top right, the light will blink and the number one will be displayed: if you click on it (and this should be done), you will be prompted to save the device configuration again - click “Save”.

Now just refresh the current page with the list of connections and, if you have not made mistakes, and the Internet Beeline is disabled on the computer itself, you will see that the connection status has changed from "Broken" to "Connected", which is what we needed.

L2TP Beeline connection is connected and working

Now the computer from which the configuration is made has full access to the Internet via the local network, and if you connect via Wi-Fi from another device, then the Internet will also be available. However, don't rush to check. First, it is better to finally configure the router, namely the parameters of the wireless Wi-Fi network.

Setting up Wi-Fi on the DIR-300 B7

In order to configure Wi-Fi on the DIR-300 B7, return to the advanced settings page and select “Basic settings” in the “Wi-Fi” item.

The following parameters can be configured on this page:

• SSID (Wi-Fi hotspot name) - Enter the desired name, in English characters. This name will help you distinguish your wireless network from your neighbors. By default (and recommended), visible to everyone in range of the AP.
• A country - network standard. The default is Russian Federation, but I recommend changing to US. Some devices do not see or do not connect to the point with the RF region. Everyone, without exception, connects to the United States.

The rest of the parameters can be left unchanged. Save your settings. Now in the "Wi-Fi" section, click the "Security Settings" link.

• Network authentication - WPA2-PSK
• Encryption key PSK - the desired password for your wireless Wi-Fi network, which is required to connect to it. Must contain at least 8 Latin characters and / or numbers.

Save all your settings. The router is ready to use.

Setting up IPTV Beeline (Digital TV via a router)

In order to set up Beeline television on the DIR-300NRU B7, simply go to the main page of the router settings (Quick setup) and click on the item "IP television". In the next step, you will be asked to select a port on the router to which you will connect the Beeline set-top box. Select the appropriate one and save the settings. Done.

In case something refused to work for you - write comments. If everything works, write too (I will be pleased) and share the instructions on social networks - this will make it easier for others to find it.