How do I change my Wi-Fi password? Standard passwords from routers. Specific models and examples

A hard-to-remember password for the WiFi router has been set, which you cannot remember. It can be easily changed - in just a few minutes. Everything is very simple.

Often, users use the default WiFi router settings, especially when someone from their acquaintances configured it for us or received them from our operator. Typically, the WiFi password is written on a sticker attached to the bottom of the router, which is a long and complex combination of numbers and symbols. However, it can be changed.

Step 1: Find the IP address of the router and enter the device settings

To change it, we must go to the WiFi router settings. Login is carried out by entering the IP address of the router in the browser line from any device (computer, laptop) connected via a network cable or WiFi. For example, depending on the model, it can be 192.168.0.1 (D-Link) or 192.168.1.1 (TP-Link, Zyxel, Asus). If you do not know the IP address, you can view it through the command line.

To do this, press the Windows key + R key combination and enter the cmd command. To the command line console, type the ipconfig command. In the list that opens, we find the line with the wireless network adapter and the "Default Gateway" field. Actually, the IP address of the device will be registered in the default gateway - most likely, 192.168.0.1 or 192.168.1.1.

Open a browser and enter the router's IP address into the address bar. The first window will open where you will need to enter your username and password. You can find them in the instructions for the device (as a rule, this is a combination of admin / admin).

Step 2: Set a new password for the WiFi network

WiFi routers have different software, so it makes no sense to describe them, because detailed instructions are provided for each model. Nevertheless, all the settings items are similar, only the software shell is different.

In the main settings window, we are interested in the section of the wireless network (Wireless Settings / Wireless Network Settings / Wi-Fi Settings). Go to this section and look for the "Password" or "Network key" or "WPA2 Shared Key" (WPA2-PSK) and the like. In some models of routers, the field for changing the password is located in the subsection Wireless Security.

We remove the old password and enter a new one, then save the changes. After changing the password in the router, you need to change it on all devices (computers, laptops, tablets, etc.) connected to the WiFi network. You see, there is nothing difficult in changing your password. And if you notice that the Internet starts working slower or you suspect that someone from the outside has connected to your home network, you can easily change it.

Hello! Every day, more and more people are abandoning the old proven way to go online by pulling a cable. Now, most of the users of the World Wide Web have a router in their apartment, hence, sooner or later, the question arises, how to change the password for Wi Fi in the router?

I want to say right away that depending on the model of your router, the sequence of actions will be slightly different, but the meaning and principle in all such cases is the same. It is also worth paying attention here to the fact that, often, each of these installation / configuration wizard windows may not contain the Russian language. Therefore, in order not to dig a hole for yourself, do everything according to the instructions that I will give below.

So let's go!

How the password for Wi-Fi is changed

The first step is to go to the settings menu of your router, which is the transmitter of the network signal. If you do not know the name of the network, then you will need to connect via wired communication. To do this, we will have to, without disconnecting the device, connect the wire to a free connector. It is also worth noting that if there is only one connector, then you will need to disconnect it and connect yours. Pull the other end of the wire to the computer and insert it from the back into the socket that is intended for the wire cable. Thus, we get the following picture: one end of the wire goes from the router, and the other is connected to a computer or laptop.

Naturally, the scheme described above may be different for you. For example, in the picture above there is also a provider's cable (a company that provides Internet services), which can "come" from the entrance. But as you can imagine, the meaning remains the same.

How to log into the router

To do this, we find four stripes in the lower right corner of the screen, indicating that your computer is connected to Wi - Fi. Click on the icon with the left mouse button, select the currently active connection and right-click on it. In the drop-down menu, select the item: "State".

We are looking for an item in the list that is called: "IPv4 default gateway".

We write out the value of this line, it will be presented in the form of four numbers separated by dots. This is the same local IP address that we need now.

If you are going to change the password for wi-fi and have not been connected to it, then you can do the same operations on another computer that is currently connected to this router. It doesn't matter if it's Wi-Fi or a wired connection.

Also, the IP address can be viewed under the router or behind it.

Council. If you do not know the IP address of the router, then you can try to pick it up. For example, 192.168.1.1, 192.168.2.1, 192.168.1.254.

In general, no matter what method you choose, after the address has been successfully typed in the browser address bar, press "Enter". A window will appear in front of you where you need to enter a username and password to access the settings of the router.

If you do not know the password, you can look again on the device itself. In the image above, this data is usually indicated under IP. If they are not there, then try to enter the login admin or administrator, the password may be the same as the login or not at all.

Change password

Then the settings open and your eyes naturally scatter in all directions. I cannot write specific instructions on what exactly needs to be done next, since everything depends only on the manufacturer of your router. However, I will still explain the basic principles that guide developers when creating such settings.

First, you will have a small menu anyway. Either at the top of the window or on the left. They usually do not do it differently. In it you need to find an item that will be called "Interface Setup" or "Basic", i.e. the name of the item in English may be called something different, but very similar to these options that I gave as an example.

When I can't immediately figure out where the wireless settings are, I just go through the menu and look for what I need. For example, the word "Wireless". So in any case, you will definitely find this tab.

This section will contain many fields for input and selection of settings. For example, “SSID”, where you can set a name for the Wi-Fi point. Above I gave instructions on how to enter the settings of the router, if you do not know the SSID, now you can give a name that suits you.

But still, how to change the password for Wi Fi? We are looking for here the field in which the parameter responsible for the type of protection is set. There should be WPA2-PSK. In the "Pre-Shared Key" field, enter the desired combination of Latin characters - this is your password for Wi-Fi.

After that, click on the button to save, for example, "OK", "Save" or "Submit". By the way, there are articles on the blog that can help you with other questions about Wi Fi:

Now you can disconnect the cable, if it was connected, and put it on the far shelf;). Some routers sometimes fail, if you do not see your SSID through your laptop, wait 2-3 minutes or reboot it - turn it off and on again. Then you connect to Wi-Fi with a new password.

Thank you for your attention, I sincerely hope this article helped you understand all the complexities associated with a WiFi password.

To consolidate the material, watch the video on setting up D-link:

How to protect your Wi-Fi network from strangers? To do this, you need to put a password on the wi-fi. A home Wi-Fi network needs to be protected so that its neighbors “freeloaders” cannot connect to it, which leads to a drop in Internet speed. This is due to the fact that the signal strength of the router depends, among other things, on the number of devices connected to it.

Setting and changing the Wi-Fi password - instructions

What to do if you have set a password for Wi-Fi Internet and forgot? The password on the Wi-Fi router can be changed at any time. How this is done on the routers of the Chinese company TP-LINK will be discussed below.

First you need to go to the router whose settings you want to change. To do this, in the search bar of any browser (Opera, Mozilla Firefox, Chrome, etc.), type http://192.168.0.1 or http://192.168.1.1 (depending on the model), then press Enter.

The access address, as well as the factory login and password for entering the device, are on a sticker located on the back of the router. You can find this information in the instructions for it.

Next, you will be asked for a username and password, after entering which the settings window will open. If the username and password previously set by the user were hopelessly lost, then it is necessary to restore the factory settings of the router by pressing the Reset button, and then use the data indicated on the sticker to enter. As a rule, they are: login - admin and password - admin.

1. In the side menu (left) select "Wireless Mode" and the section "Wireless Security".
2. Select an active security method, which can be WPA / WPA2-Personal or WPA / WPA2 - Enterprise, or WEP, or "Security is disabled".
3. If WPA / WPA2 - Personal is selected, then in the “PSK Password” line, enter a new password and click the “Save” button.
4. If another security method is selected or it is disabled, then you need to select WPA / WPA2 - Personal and come up with a new password. Please note that this method provides the best Wi-Fi network security when you select WPA2-PSK and AES encryption.
5. After the performed manipulations, you will be prompted to reboot the router, with which you must agree. Password changed.

How do I choose a strong Wi-Fi password?

It is better to choose a password so that it can be remembered and typed on any mobile device. It shouldn't be too long or too short. Better to set a password between 8 and 10 characters.

It is desirable to combine letters and numbers in the password. To make your Wi-Fi as secure as possible, you must select the WPA2-PSK security standard. You don't need to set a password that is too simple to guess.

Which password you SHOULD NOT use:

• their names and surnames, relatives, pets.
• dates of birth and any others.
• simple words.
• simple combinations of numbers and letters. For example: 1234, 87654321, qwerty, qwerty12345, 123abc
• repeating numbers or letters. Example: 222222,111222, aaabbb.

A strong password is a barrier for ill-wishers, without entering which it is impossible to receive a signal from a Wi-Fi router. It is believed that it must contain at least eight different characters, which an ordinary user cannot pick up. For added security, the password should be changed periodically.

How to find out the password for your Wi-Fi

How can I see the password for the Wi-Fi on the computer? To find out or change the password on a WiFi router, you need to go to the Wireless settings, Wireless mode or Security settings. To enter the device web interface, enter the address:. To gain access, enter admin admin.

There are several ways to view the password from the WiFi on the computer.

After changing the password, it is necessary to connect the Wi-Fi consumers in the house to the router, for which, on each of them, select a network with the desired name and enter a new password, which is recommended to be entered into a notebook for safekeeping.

Most of the subscribers of provider companies use special equipment called a wi-fi router to access the Internet and operate interactive television. It is suitable for creating a wireless network, connecting to which you need to enter a randomly generated codeword. Users often have a question about how to password-protect the Wi-Fi router so that the key is easily remembered.

First of all, let's figure out if you need protection for the wireless network. The answer is yes. Codeword protection helps prevent unauthorized people or intruders from connecting to your wireless network. Access to personal and personal data will be securely closed.

Password rules

To put a password on a router, you must follow some rules:

1. The length of the codeword is at least eight characters.
2. The password contains at least one capital letter (A, B, C), one digit (1, 2, 3) and one special character (*, # ,!).
3. It is strongly not recommended to use a password as a basic word: last name, first name, date of birth and other known facts from the user's life.
4. Do not compose a code word from several consecutive symbols or letters. For example, "qwerty" (keyboard layout) or "123456789".
5. You should also not use the standard templates: "password", "passw0rd" and other common ones. They should be avoided when constructing the codeword.

Using the rules, the user can easily put a complex password on a regular wi-fi router.

Which security certificate to use: WEP, WPA-PSK, or WPA2-PSK

A security certificate is essentially an electronic document confirming the reliability and security of a connection. There are three types:

1. WPE is an outdated standard, one of the first. The protection provided is zero. Not recommended for use.
2. WPA-PSK is the next security certificate to replace WPE. He used the TKIP protocol to ensure data integrity. Unfortunately, during its exploitation, some vulnerabilities were discovered through which an attacker could gain access to a secure connection.
3. WPA2-PSK is an improved version of the previous certificate, where known vulnerabilities are closed. AES protocol is used for data encryption. This is the most secure option currently used in all wireless networks. Accordingly, it is recommended to choose it to ensure reliable protection of the user's local network.

WPA2-PSK is classified into two types: Personal and Enterprise. WPA2 Personal is used in everyday conditions, while Enterprise is used in the corporate sector. Further, when answering the question: "How to password protect the router?", The conversation will only go about the Personal version.

Which type of encryption to use: TKIP or AES

Data encryption is carried out using the TKIP or AES protocols. TKIP is a legacy option. It has certain restrictions on the data transfer rate: up to 54 Mbps. Plus, it's much easier to crack than AES.

AES is a modern encryption protocol. Supports the latest 802.11n wireless networking standard and 256-bit encryption, making it extremely difficult for an attacker to hack.

Safe method: use the AES encryption protocol in conjunction with the WPA2-PSK certificate.

How to make a password from random characters

If there are some difficulties with creating a password according to the rules indicated above, you should use special programs. They generate a random set of characters according to a user-specified algorithm.

As an example, let's give an example of an online generator for generating code keys:

Set the necessary requirements:

Click the "Create" button and select the option you like:

Another way is to use a regular book. Open it on the first page that comes across, write down random words. Next, in the resulting set, select, for example, every second letter and change it to Latin. Every fifth - per digit, and every seventh - per symbol. Apply the random number method and capitalize five letters from the remaining letters. The last step is to simply swap the location of the words among themselves.

Using the above methods, it is easy to replace the "factory" or forgotten password on a wi-fi router with a more complex one.

Step-by-step instructions on how to change a simple password on a Wi-Fi router

To set a complex password on a Wi-Fi device, you need to log into the router itself and make some configuration changes. Here is a memo on how to password-protect your Wi-Fi router.

Open the router configuration page

To get started, go to the parameters of the router using a browser from any mobile device or workstation. The screenshots below are used for example only. Each router model will have its own interface, but the names of options and menus remain almost unchanged.

In order to enter the router menu, you need to specify its IP address. It is located on the back:

Type the found address in the browser line and go to the page where you can change the password on the router.

Entering username and password

Enter the specified credentials:

They may differ from model to model. Somewhere the options are 1234 or admin, and in legacy models there is sometimes an empty string.

Open the wireless settings section

Move to the section "Wireless mode", in English it is usually called "Wireless Settings".

This section lists the basic settings of a wi-fi network, as well as ways to change the password from a wi-fi router.

The option "Wireless Security" contains the answer to the question: How to set a "Wi-Fi" password?

Change the password in the router settings

Switch to the mode for selecting options for a custom wireless network:

In order to change the password for wi-fi, you must use the parameters in the window below:

In the field where you need to enter the security key for the wireless network, enter the code word compiled according to the instructions above.

After the user has changed the code word, it is necessary to save the changes made to the configuration of the network device.

Check and change security type

Since changing the default password on wi-fi equipment is not just coming up with a new code word, but also setting the correct settings, you need to immediately check the encryption protocol - AES. If there is a different value, then we change it to AES:

Changing the name of the wireless network

In the parameters of the router, it is possible not only to change the password for wi-fi, but also to give a different network name. To use this function, select the "Wireless Settings" item:

Enter the most suitable name in the "Network name" field and accept the corrections made.

Changing the password for access to the router

In the field "Previous username" enter the login indicated on the back of the router, and in the following field - the code word. Next, create a new login, a new password and repeat it. After carrying out all the actions, saving the parameters is required.

Conclusion

The article contains instructions that answer frequently asked questions: "How to set a password on a network device", "How to correctly change a simple password for a Wi-Fi router." The screenshots attached to the text make it easy to understand the steps for quickly changing the password on the router. And also what security key is best to use and how to change the set password on a wi-fi router. Instructions on how to properly password-protect "Wi-Fi" on your home computer will fit all Windows versions: 7, 8.1, 10. We hope that now the user will not have any questions about how to change the old password from wi-fi.

Open the router's configuration page. This can be done using a browser if the computer is connected to a network. If you do not know the password and cannot open the configuration page via Wi-Fi, you need to connect directly to the router using an Ethernet cable. This will "bypass" the need to use a password.

Enter your username and password. Any router will require a username and password before you can access the network settings. If you did not change the password when you first set up the router, most likely the username is “admin”, and the password can be “admin” or “password” (without quotes). Different models may have different passwords, so search for your router model on the Internet to find out the exact login information.

• If you changed your password for a long time and forgot it, or if you got someone else's router, and the former owner did not reset it to factory settings, then press and hold the Reset button for about 30 seconds. This will reset the router to default settings, allowing you to enter the original username and password to login.