Computer shutdown program. Shutdown timer - an overview of useful programs and utilities

Useful programs

A program to automatically turn off and turn on a computer

There are situations when it is necessary to turn off the computer at a specific time, but you cannot do this due to your absence. Or when you fell asleep watching a movie late in the evening lying on the couch. In addition, I want the computer to turn on itself on a certain day at the appointed time and launch the application necessary for performing an important task - for example, an audio player with loud music early in the morning :) - free program turns the computer off and on on a given day and a specific time.

Save time at work. After all, every time you come to the office, you turn on your computer, start the editor and check your e-mail. Let everything be ready for your arrival, suddenly you are late! And when leaving work home, let the computer turn itself off - will cope. Time and so little for life.

Program installation

Install the TimePC program and the computer will stop making noise with fans at night by turning off at the appointed time. Set the date and time to automatically turn on the computer, add programs that you start every morning to the list of applications to start when you turn on your computer - save yourself from unnecessary movements. The TimePC utility will turn the computer on and off for you, it will prepare the working environment on the desktop when you start the PC.

To install the TimePC program, download the utility distribution kit, run it and follow the instructions of the installer. The installation process is very simple, you just need to click a few times and TimePC will start working on your computer.

Update

If you decide to update the program, first close TimePC, uninstall and then install the new version.

TimePC program interface is very simple, all settings and functions fit into one small window. The utility takes up very little space on the hard disk and does not interfere with the operation of the operating system and other programs. TimePC sits quietly in the system tray and is always ready to fulfill your task to turn off and turn on the computer at the specified date and time. TimePC supports Russian and English languages, runs under Windows XP / Vista / 7.

Principle of operation

TimePC uses this function ACPI (advanced configuration and power management interface) as hibernation - in other words, putting the computer into an energy-saving mode of operation. In "computer" language, TimePC is not turns off, but puts the computer into hibernation mode and does not includes, but takes it out of this mode. Most modern computers are competently able to put a PC in this mode. If the PC does not support hibernation, the program will not wake up the computer from "deep sleep". If there are ACPI settings in the BIOS settings of the motherboard, but when the computer is shut down by the TimePC program (more correctly, the transition to hibernation) the fan continues to make noise, then you need to select the S3 / STR value in the ACPI Sleep Time option (there is also S1 / POS).

Scheduler

In order to turn off and turn on the computer on a schedule, the program implements the Scheduler. For each day of the week, you can set a time for the computer to automatically enter and exit Hibernation Mode. TimePC will automatically start the PC, provided that the program itself turns it off.

If you have any questions about the TimePC program, write to the author.

If, when exiting hibernation mode, the computer displays a window for selecting a user with a password, and you want to disable this request, you must do the following: click Start \u003d\u003e Control Panel \u003d\u003e Power Options. In the window that opens, click "Request a password on wakeup" and select "Change currently unavailable options." After that the option "Do not ask for a password" will become available for selection.

If the program “does not turn on the computer by time” try the following: Control Panel \u003d\u003e Power Options \u003d\u003e Setting Power Plan \u003d\u003e Change Advanced Power Options \u003d\u003e Sleep \u003d\u003e Allow Wake Timers \u003d\u003e On.

TimePC 1.7 from 09.02.2015

The program has added the option to restart the computer after exiting hibernation. With the option enabled, the PC will restart 1 minute after waking up.

TimePC 1.6 from 18.10.2014

Now, 30 seconds before shutting down the computer, a window pops up with a countdown. Fixed error starting the program on Windows with an English-language interface. TimePC 1.6 runs on 64-bit Windows too.

TimePC 1.5 from 19.02.2012

  • The program has been translated into German.

TimePC 1.4 from 01/13/2012

  • A scheduler has been added to TimePC, now you can turn on and off your computer on a schedule.

TimePC 1.3 from 08.24.2011

  • Added a function to select the computer shutdown mode by a specified time and date - go to hibernation or completely shut down the PC.

TimePC 1.2 from 07.07.2011

  • The interface of the program has been changed, the work of the program has been optimized.
  • The error that occurs when switching from the 31st to the 1st day of the next month has been fixed - the program did not activate the computer.

TimePC 1.1 from 04.07.2011

  • Added an automatic update function, fixed a bug with incorrect display of the program interface when screen scaling is enabled.
  • Fixed error that occurred on Windows XP when shutting down the computer. If the user turned off the PC through the "Start" menu, the program did not allow to end the session.

TimePC 1.0 from 28.06.2011

  • The first version of the program

Official site:
OS: Windows XP, Vista, 7
It is necessary: ACPI
Supported languages: Russian English German
Version: 1.7
License:freeware (is free)

File size 1.9 MB

Automatic shutdown of your computer is an extremely useful option that will help you out more than once. It will come in handy in cases when a PC or laptop is busy with a long process, and you need to leave. In this case, you can configure the shutdown of the computer - when the desired operation is performed, it will turn itself off. And you can safely go to sleep, go to work or do your other business.

Most often, setting up an automatic computer shutdown is required if you:

  • check your PC for viruses;
  • convert video files;
  • install a computer game;
  • upload large files;
  • copying important data, etc.

There are many options here, but the essence should be clear.

There are 2 ways to set the shutdown time for your computer. The first is using built-in Windows tools. The second is using additional software. Read about the last method here:. And this article describes all the possible ways to configure the shutdown of the computer at a specified time using the built-in Windows tools.

All the methods below are universal and work on Windows 7, 8 and 10. Therefore, no matter what operating system you have, you can schedule a shutdown of your computer in any convenient way.

The first method of how you can turn on the automatic shutdown of your computer or laptop is to use the "Run" section. For this:

The following window will appear, confirming that everything is done correctly.

The number 3600 is the number of seconds. It can be anything. This particular command activates the automatic shutdown of the PC after 1 hour. The procedure is one-time. If it is necessary to turn it off again, it must be done again.

Instead of 3600, you can write anything else:

  • 600 - shutdown after 10 minutes;
  • 1800 - after 30 minutes;
  • 5400 - in an hour and a half.

I think the principle is clear and you can calculate the required value yourself.

If you have already activated self-shutdown of the computer and for some reason changed your mind, then call this window again and write the shutdown -a line. As a result, the scheduled automatic shutdown will be canceled. If everything is done correctly, this message will appear.

Shutting down the computer through the command line

Another very similar method is to shutdown your computer through the command line. To activate this option:


If you suddenly change your mind about performing this operation, then reopen this window and enter - shutdown -a.

This command works only when you have already set the shutdown time, but it has not yet come.

By the way, if this procedure must be performed regularly, then there is an easier way. To avoid opening the Run window or the command line, create a shortcut (for example, on the desktop). And in the "Object Location" field write the following line C: \\ Windows \\ System32 \\ shutdown.exe -s -t 5400 (the number can be any). Click Next, then enter a name for the shortcut and click Finish.

Now, when you need to set the computer shutdown, just click on this shortcut. And this option is immediately activated (you will see a confirmation message).

For convenience, you can create another shortcut to remove the shutdown of the computer (suddenly needed). But here it is already necessary to register the following: C: \\ Windows \\ System32 \\ shutdown.exe -a (no dot at the end).

Shutdown computer on schedule

And the last method is to turn off the computer on time through the "Scheduler". Suitable in cases where you need to perform this procedure regularly: daily, weekly, etc. In order not to run the command line all the time, you just need to set the shutdown time for your computer or laptop and that's it.

To do this:

  1. Go to Start - Control Panel - Administrative Tools.
  2. Select "Task Scheduler".
  3. In the right column, click on "Create Basic Task".
  4. Enter a name that you understand - for example, "Automatic shutdown of the PC".
  5. Indicate how often you need to perform this procedure (if only once, then it is better to choose one of the ways to automatically turn off the computer described above).
  6. Configure the shutdown of the computer or laptop (specify the start time and date).
  7. Select the first item - "Run the program".
  8. In the "Program" field write shutdown, and in the "Arguments" field - -s -f (the -f switch forcibly closes programs - in case they suddenly freeze).
  9. Click the Finish button.

This is how you can set the computer shutdown time. Daily or monthly setup is done in much the same way. Some fields will be different, but there is nothing complicated there - you will figure it out.

What if you want to edit or delete this task? In this case, go to the "Scheduler" again and open the "Library" tab. Find your task here in the list (by name) and double-click the left button.

In the window that opens, go to the "Triggers" section and click on the "Change" button.

If you no longer need to shutdown the computer on a schedule, then go to the "Library", select your task, click RMB, and then - "Delete".

A few words in conclusion

In many modern programs there is a checkbox "Turn off the PC after the end of the procedure." Most often it is found in those utilities that do their job for a long time - for example, defragmenting a disk, checking a laptop or computer for viruses, etc.

Be sure to check the presence of this checkbox in each program. If it is, then you will not need to configure the computer shutdown on time. This is much easier and more convenient. If it is not there, then you will have to manually configure it.

That's all. Now you know how to configure shutdown of your computer or laptop in Windows 10, 8 and 7, and you can easily do it. Choose whichever method is more appropriate and use as needed.

By the way, how to correctly calculate the time when you need to turn off your PC? Usually, programs show an approximate value for when a particular procedure (virus scan or defragmentation) will be completed. Look at it and add 20-30% (or more) on top. In any case, your PC will be turned off before you wake up in the morning or come home from work in the evening.

Hello, friends! In this article, A program to automatically shutdown your computer, let's look at several utilities that perform this function. Yesterday I had a need to turn off my computer after a certain or at a given time. There was no time to deal with third-party utilities (I had no idea that there are completely simple programs), so I used the old reliable way. I started the movie in the player and in the options I chose "Turn off after completion", setting the slider on the timeline so that approximately the required amount of time would remain. The method is certainly not the easiest, but familiar, proven and most importantly working. In this article, we will consider special programs whose main function is to automatically shutdown the computer. At the end of the article, you can see an overview of several programs considered in the article.

A tiny program consisting of only one file - OFFTimer.exe. The advantage of this program, and all those considered here, do not require installation.

You can download the program below

  • OFFTimer [~ 300 KB]

Download the archive and unpack it. For those who have difficulties with this, please read the article - How to open a file with the * .rar extension. Run the OFFTimer.exe file. The main window of the program looks like this

The program can only turn off the computer. To do this, you need to set the shutdown time and press the "Turn on timer" button. Then the program can be minimized by the button of the same name and the computer will turn off at the specified time. If you change your mind, you need to click on the "Start timer" button again. It will "wring out" and you will adjust the shutdown time. Pay attention to the warning label and save and close all applications before leaving the computer.

10 seconds before the specified time, the program will display a shutdown warning

You can cancel the shutdown of the computer by pressing the corresponding button. That's all program to automatically shutdown computer... Nothing extra.

Xtime - automatic shutdown + reminder

The program is as easy to operate as the one discussed earlier. You can download it below

  • xtime_1.3.0.5.zip [~ 110 KB]

Download and unpack the archive. Run xTime_1.3.0.5.exe. The main window of the program looks like this

To automatically turn off the computer at a specified time, select from the drop-down list on the left the number of minutes after which you want to turn off the computer and click on the "Activate" inscription in the center below

The time limit for which the automatic shutdown can be delayed is 360 minutes. Which corresponds to six hours. This should be enough for almost everyone. When the program is activated, the message Reset appears. Use it to cancel the automatic shutdown of the computer.

The xTime program can not only turn off the computer, but also make a reminder in the form of a sound signal. All that this program is capable of you can see by opening the "Tasks" menu. For a reminder, select the sound signal and activate. At the specified time, a short melody from the Boomer movie will sound and the program will automatically close.

Unlike the previous program, xTime does not display any warnings for a few seconds before shutting down the computer. You will not be able to cancel the automatic shutdown, so you need to be careful with this program.

PowerOff - a program to automatically shutdown your computer

If before that programs were considered, then PowerOff is a software package. You can download it from the link below

  • PowerOff64_RUS.zip [~ 631 KB]

Download and unpack the program. Run PowerOff64_RUS.exe. The main program window looks like this. Click on the picture to enlarge

On the Timers tab, you will find the following blocks:

  • Info - where the current time, date, user and timer clock are displayed
  • Standard timer - you can set the response time, take into account the date. You can set a reverse report, or set up a response to system inactivity for a certain time
  • Action - a section where you can choose what you want to do. You can shut down the computer, restart, go to sleep, lock the computer, end the current session, perform an action, shut down remotely, or send a command over the network. The picture on the left is a button, by clicking on which the action selected in this block will be executed immediately. Caution
  • Additional options are set when you select the "Perform action" item in the Action block. It is possible to select different actions from the drop-down list
  • Winamp dependent timer - allows you to perform the selected action after playing a certain number of tracks or after playing the last sound file
  • CPU dependent timer - allows you to assign the triggering of a certain action when the processor load drops below the specified one and lasts for the time you specified
  • Internet dependent timer - allows you to watch the network load in real time and perform the required action to reduce the speed to the limit you specified and fix it at a selected time (How to check the connection speed)

For a simple automatic shutdown of the computer, it is enough to use the Standard timer by setting the reverse time of the report or setting the shutdown time. 20 seconds before triggering, a message appears for the user, where you can see what kind of action will be performed

At the moment of triggering, a window will appear in which you will be warned again that after 30 seconds the selected action will be performed

It turns out that the user is warned within 50 seconds, which is very convenient.

The program also has a built-in diary and a planner that can be customized according to your choice. The program itself can be very flexibly adjusted in the "Settings" tab. All actions that were performed are recorded in the program log, which can be viewed on the corresponding tab.

Conclusion

In this article a program to automatically shutdown your computer and more three programs were considered, which 100% cope with the task assigned to them. All utilities are convenient in that they do not require installation. As a result, you don't have to clean your computer. Delete the folder with the program and that's it.

Video "Computer shutdown program"

A very simple program TimePC to shutdown the computer on schedule. And it will also turn it on according to a schedule that you yourself configure.

There are situations when the computer performs some task, and you urgently need to run somewhere. Well, you just can't be late. Aborting the process is not good, not being in time is also bad. And many do not like to fall asleep in complete silence and for this they turn on music or just some kind of movie. If only it was noisy. The person is resting, but the computer continues to work and overheat.

Well, to prevent this from happening, we will install a special program - TimePC... With this program, you can instruct the computer to turn off at a certain time.

Although the operating system has something similar (setting the power supply), a standard function does not completely turn off the computer, but only puts the computer into sleep mode. Not bad, but still different compared to TimePC.

The program has additional useful functions. In addition to the fact that she can automatically turn off the computer at a user-specified time, she can turn it on. Even launch, at the request of the user, some program or several programs.

Let's see how simple it is. The program is displayed in three languages, but after its installation, the interface will be in Russian. You don't have to change anything.

In the settings, you can uncheck the box " Close open programs on shutdown«

The fact is that when you turn off the computer with this program, we can choose one of two modes. The first is a normal shutdown, as we are all used to, the second is hibernation.
Hibernation (hibernation) from English translates as "hibernation" or just "sleep" In this mode, the computer rests, but before shutting down it remembers everything that was opened and started and saves it in the right place on a non-volatile storage device.

This is very convenient if you did not have time to finish working in some programs or open folders. When you turn on the computer, everything will remain in place.

The next item " Check for updates»Here I also unchecked the box. Who knows, maybe programmers somewhere did not overlook something and the program will start not working correctly. Well, in the meantime, I am satisfied with this working version, I work with it, without updating.

We pass to the main thing. In the left column, select "Off / On PC"

On the right side of the program, check the box next to “ Turn off computer"We set the shutdown time, but we can not touch the date, it is already substituted for the date set on the computer. Unless you want to turn off your PC tomorrow or in a few days.

Now you need to select the shutdown mode. As I wrote above, there are two modes. Choose which one is more convenient for you. You can also schedule switching on after a certain time. Configured, click the "Apply" button and check if everything is correct. If you made a mistake in time or date, you can click the "Cancel" button and reconfigure everything.

We figured out the one-time setting, now go to "" Everything is the same here. We set the shutdown time and turn on the computer for a whole week. There is no sleep mode in the scheduler.

Configured, click the "Run" button and check if everything is correct.

By the way, before the computer turns off, the program will notify you about this in 30 seconds. If you are at this moment you are at the computer, you can turn it off by pressing the button labeled "STOP"
Go to the item " Launching programs "

Here we can specify the program that we want to run together with the operating system. For example, a player with music. You will get such an unusual alarm clock. We can add a browser to the player so that we can check mail in the morning. TimePC allows you to run multiple programs at once.

Click the "Add" button. The explorer window will open. In the left column, select "Desktop" In most cases, when installing a program, it leaves its shortcut on the desktop. From the desktop, select the shortcut to the program that you need. Programs that come with windows need to be found on the C drive in the Program Files folder or C: \\ Windows. Let's say the standard Notepad program which is located at C: \\ Windows \\ system32

To remove a program from auto-launch, you need to select it and click the "Remove" button

And that's all. Download the program and use it.

Download from Yandex disk

Some laughter !!

This is useful to know:



There are situations when we need to leave our computer on for a long time. This may be due to the work of the PC at night, when any large files are downloaded, or when there is a long installation of operating system updates - the fact is that it becomes necessary to automatically turn off the computer without direct user intervention. In this article I will tell you how to turn off your computer after a certain time, and also introduce the reader to the tools that can help us in the scheduled shutdown of our PC by timer.

Turn off the computer automatically at the specified time

How to turn off the computer after a certain time using the Windows toolkit

If you need to turn off your computer on a timer, then the simplest and most convenient solution would be to use the tools built into the Windows OS. A dedicated team will serve as such tools shutdown, as well as a built-in task scheduler.

How to use the Shutdown command

To use this command, press the key combination Win + R, and in the line that appears, enter:

shutdown -s -t 3600 / f

  • s - completion of work;
  • t - indicates the time in seconds after which our PC will be turned off. That is, 3600 is 60 minutes (1 hour). Instead of this number, you can enter your own, having previously calculated how much time you need it will take in seconds;
  • f - from the English. "Forced" - forced. Instructs the system to force quit all active applications, that is, no program can interfere with the shutdown of your PC.

After you click on "Ok", you will receive a notification from the system about the shutdown of your computer after a specified time. If you suddenly change your mind, then press Win + R again and in the line that appears, type:

and this function will be deactivated.

How to use Task Scheduler

Using this scheduler, you no longer need to think about how to turn off your computer after a certain time, the program will do everything for you thanks to the schedule you created. Please note that this feature exists in Windows operating systems starting from version 7.

So, do the following:

  • Click on the "Start" button;
  • In the search bar, enter taskschd.msc and click on "Ok". The task scheduler window will open in front of you;
  • Click on "Action" in the upper left;
  • Select the "Create Basic Task" option;
  • In the window that appears, enter the appropriate name, for example "Automatic shutdown of Windows" and click on "Next" below;
  • Next, you will need to select the shutdown frequency. If you want to do this every day, for example, at 3 am, then select “Daily”, otherwise choose another option and click on “Next”;
  • In the next window, determine the shutdown time and click on "Next";
  • In the "Action" option, select "Run the program" and again click "Next"
  • In the line under the inscription "Program and script" we write:

C: \\ Windows \\ System32 \\ shutdown.exe

In the argument field, type:

How to use a bat file to shutdown PC automatically at a specified time

An effective answer to the question of how to turn off the PC after a certain time can be the use of a bat file. When you click on such a file, your computer will turn off after the right time.

Open notepad and enter there:

if% time% \u003d\u003d 01: 00: 00.00 goto: b

shutdown.exe / s / f / t 60 / c "Good night, your computer is shutting down"

  • Save this file called shutdown.bat (make sure it is shutdown.bat, not shutdown.bat.txt) on your desktop.
  • If necessary, activate it by clicking on it.
  • You will see a blank command line screen, then just minimize it and keep going.
  • At the right time (in this text it is one in the morning), you will see a message about the computer shutdown and your PC will turn off.
  • You can change the shutdown time by specifying other numbers instead of "01: 00: 00.00".

We turn off the computer at a certain time by us using programs

Third-party software applications that need to be installed on your computer can also help in the question of how to turn off the system after 10 minutes or after an hour. These are products such as PC Auto Shutdown, Wise Auto Shutdown Software and a number of others.

PC Auto Shutdown - shutdown the PC by timer

This PC Auto Shutdown application for Windows OS will allow you to turn off your computer at the right time. To use its functionality, do the following.

Did you like the article? To share with friends:
You may also be interested in