The question often arises of what to do after buying a router. How to configure it so that it provides the Internet to various devices, how to connect it to a computer. This article is just intended to address these issues. It will focus on Tp-Link routers. The main points that interest users will be highlighted and illustrated.
It should be noted that there is a wide variety of router models. The process of connecting cables is similar for most of them, but the setup will be different, since each model has its own firmware version and design and ergonomic features of the administration panel. Such information will be provided in a separate article.
- TL-WR940N,
- TL-WR740N,
- TL-WR841N,
- TL-WR842ND,
- TL-WA701ND,
- TL-WR743ND
Router version TL-MR3220 will be used as an example device. Unfortunately, there is no more popular and widespread TL-WR841N at the moment.
How do I connect my computer to the device via a network cable?
The first task after the purchase is to supply power to the router. To do this, an adapter is connected to it into a connector named POWER. It is impossible to make a mistake in this case. The other end must be plugged into a power outlet. Some models have a power button. It must be pressed if the bulbs on the box did not immediately light up. The second task is to connect the router to the computer. A network cable is used for this. One comes as standard. Its end is inserted to the network card of your computer,and the second part to the LAN connector of the router.Tp-Link routers usually have 2 connectors. They have a characteristic yellow color. Any of the connectors can be used. Their number means how many devices can be connected to this router. It can be a TV, set-top box or something else connected via a cable. Wi-Fi is also allowed. You may find it useful to look at the instructions for connecting your laptop to Wi-Fi.
How to connect TP-Link to the internet?
The main task of the router is to distribute the Internet connection. In order for it to perform this function, it is necessary to connect a network cable from the provider or an ADSL modem to it. Connects cable from ISP to WAN connector.There is only one piece of this connector on the box. It is usually highlighted in blue.
If the Internet is provided via an ADSL modem, then a cable from the modem is connected to the WAN connector. It is also available in the basic configuration.
In the image, the manipulations performed are as follows.
If all actions are performed correctly, a connection icon will appear on the computer. Most likely, it will be offline or limited. You need to configure your router. Reading recommended. Most models are configured in the same way, so the TP-LINK TL-WR940N configuration example can be used. If the provider uses a dynamic type of distribution of IP addresses, then the Internet can work without preliminary configuration. Likewise, if you have an ADSL modem installed. All the data has already been entered on it, therefore, the distribution of the Internet is carried out automatically.
Even if you have the situation described above, you will have to change a number of parameters. You will need to set up a Wi-Fi network and set a password for a new wireless connection. Very often, when setting up a router, various problems arise. Many are related to the lack of internet. Therefore, you should familiarize yourself with the article "Without access to the Internet", or "Limited", it contains the necessary answers and methods for solving problems.
Hello, today we will talk about setting up the most popular router in the CIS - TP-LINK TL-WR841N. For a very low price, it has decent qualities, such as high-quality work, ease of connection and ease of setup. Also, the internal interface allows you to perform basic settings. But since this is a budget router, you shouldn't expect much from it. All it can do is receive the Internet over the wire and distribute it over WiFi and over the wire to other devices. I will not tell you about its characteristics, this is all described in detail on the reviews page (you can find it with a self-help search or go to the "reviews" section). Here we will consider detailed instructions for configuring TP-LINK TL-WR841N.
Connecting a TP-LINK TL-WR841N router
The basic rule that I recommend to everyone is to configure the TP-LINK TL-WR841N by connecting it with a wire to a computer or laptop. You can configure the router using Wi-Fi, but I highly discourage doing this, so we connect the router as follows.
Based on the picture and our own intuition, we can build a simple connection diagram:
- We take the power supply and connect it to the router (into a special connector, there is only one), then plug it in, now press the button On off. nutrition... After that, the network indicator on the front panel (the first from the left) should light up, the second indicator (system) may also light up (and blink) - this means that the router is ready to work.
- Then we take the Internet wire of your provider and connect it to the WAN (Internet) connector. The fourth indicator from the left should start flashing.
- Now we take the short wire (patchcord) that comes with the kit and connect it to any of the LAN connectors, and connect the other end of the wire to the computer's network card.
That's all, this completes the connection.
Reset TP-LINK TL-WR841N router settings
I always advise those who set up a router for the first time after purchasing to reset the router to factory settings. You may ask why to do this, if the router should be at the factory settings anyway. But in my practice, it happened that the router had already been configured by someone earlier. Resetting the settings is also useful if you made a mistake while configuring the router and do not know where exactly. This is very easy to do. There is a button on the back panel of the router, signed as WPS / Reset, click on it and hold it for 20-30 seconds. After that, after waiting a couple of minutes, the router will completely reboot and the default settings will be set.
Login to TP-LINK TL-WR841N router
After we have connected the router to the Internet and the computer, we need to enter the router interface. To do this, open any browser (Opera, Google Chrome, Yandex browser, Mazila) and enter 192.168.0.1 in the address bar. There is also a universal address for TP-Link routers - this is "https://tplinklogin.net". After entering any of these addresses, click on the Enter button. An authorization window will open in front of you, in which you will be asked to enter a Username and password. By default, the name is -admin, the password is admin. After entering, click on the "Login" button.
Change default password TP-LINK TL-WR841N
Many wizards recommend changing the default password for security purposes. My opinion on this is this: if you do not have trust in those people who will have access to your home network, then it is worth changing. If you are confident in these people, then you shouldn't change. The fact is that the password for the router is usually set once and is quickly forgotten, since it is rarely needed after configuration. When you need it, you will not be able to remember it and you will have to reset the router settings again. But I cannot explain how to change the password on the router.
After you have entered the router interface in the left menu, at the very bottom, there will be a section "System Tools". In it, select the item "password". A window with fields for filling will open, fill them in:
- Previous username - if the settings were default, then enter admin.
- The previous password - also if the default settings are - enter admin.
- New username - you can enter any name. But again, I do not recommend changing it, it is better to leave admin.
- New password - come up with a new password and enter it.
- Confirm the password - we repeat the password we invented.
Also pay attention to the red caption above which says "Username and password must not exceed 14 characters in length and must not include spaces!"
After all the data is entered, click on the "Save" button.
Setting up the Internet on a TP-LINK TL-WR841N router
Before you start setting up the Internet, you need to decide what type of connection your provider uses. Also you should know what parameters you have to fill in. Basically, all the data is in the contract, but sometimes you have to call the provider's support. Below, in each type of connection, I will indicate which fields to fill in and what data to enter. I also wanted to say, do not be afraid to call those support, they should provide this data free of charge.
The main Internet settings page is located in the "Network" -\u003e "WAN" item. Here, in the "WAN Connection Type:" field, we will select our connection type.
Dynamic internet connection type
This type of connection is the default in the settings of the router, so if your provider has this type, then after connecting the router, you should get the Internet.
If you need to select this type of connection, changing it from another type, then you can do this by going to the "Network" section - the "WAN" item and in the "WAN connection type" field, selecting "Dynamic IP-address". Then click on the "Define" button, wait until the data is loaded and click on the "Save" button.
Connection type Static.
Here you need to know a number of parameters, such as: "IP Address, Subnet Mask, Default Gateway, Primary DNS". These parameters must be specified in the contract from the provider, they can also be found from the settings of the network card of the computer that was connected to the Internet (how to do this is described in the article setting up the network card, the link to it above). Or you can just call tech support and find out these parameters. Let's fill in all the fields:
- WAN connection type - select "Static IP-address".
- IP address - you need to know.
- Subnet mask - you should know.
- The main gateway - you should know.
- MTU size (in bytes) - most likely, the default will be 1500, if the provider did not say anything about it additionally. But if the provider has indicated your size - put it.
- Primary DNS - You Should Know.
- Secondary DNS - this parameter can be provided by your provider, but I recommend specifying the DNC server from Google, 8.8.8.8
PPPoE connection type
This type of connection is used by a large number of companies, including the largest TTK, Rostelecom, Dom.ru. You will definitely need to know your username and password to connect to the Internet. These data must be indicated in the contract with the provider. If you have lost the contract, you will have to call those support. Let's fill in all the fields:
- WAN connection type - choose "PPPoE / Russia PPPoE".
- Password - you must know.
- Confirm the password - you should know.
- Secondary connection - everything is not easy here. By default, providers do not provide this service, so the point is on "Disable", but if you ordered additional parameters, such as Static ip, then you need to select the appropriate item and enter the data.
- WAN connection mode - here we put a dot on " Connect automatically ”.
PPTP connection type
A popular type of connection is used by many providers, some of the leaders are Aist Togliatti, Ufanet (UfaNet). To configure, you need to know "Username, Password, IP address or VPN server name". All these data must be indicated in the contract with the provider. You can also get them from the provider by calling those support. Now let's fill in all the fields:
- WAN connection type - choose "PPTP / Russia PPTP".
- Username - you must know.
- Password - you must know.
L2TP connection type
Compared to the rest, a fairly new type of connection. The largest provider that uses this type of connection is Beeline. You need to know the Username, Password, IP Address, or VPN Server Name settings. Let's fill in all the fields:
- WAN connection type - select "L2TP / Russia L2TP"
- Username - you must know.
- Password - you must know.
- IP address / Server name - you should know.
- IP-address - do not need to be specified if you have not ordered an additional service "Static IP" from your provider.
- Subnet mask - do not need to be specified if you have not ordered an additional service "Static IP" from your provider.
- Default gateway - do not need to be specified if you have not ordered an additional service "Static IP" from your provider.
- DNS - do not need to be specified if you have not ordered the additional service "Static IP" from your provider.
- Internet IP address - not required.
- Internet DNS - no filling required.
- MTU size (in bytes) - if the provider did not specify this parameter for filling, we leave it by default.
- The maximum downtime - for those who have unlimited Internet, set "zero", the rest - at your discretion in minutes.
- Connection mode - put a dot in front of "Connect automatically".
Setting up Wi-Fi on a TP-LINK TL-WR841N router
Before setting up WiFi, make sure that the Internet on your computer is working. To do this, open a new tab in the same browser and try to open any site. If everything is fine, then let's start configuring WiFi. Next, I will explain in detail not only how to set up wi-fi, but also what capabilities the TP link tl v841n router has. Most importantly, check if wi-fi is enabled on the router. The switch on the back of the router is responsible for this, it needs to be in the "ON" positions.
Setting the Wi-Fi network name
The first step in setting up a wireless network is setting up the network name. This is the name that will appear in the list of available wireless connections. First, let's go to the "Wireless Mode" section -\u003e select the "Wireless Mode Settings" item. On the page that opens, fill in the fields:
- Network name - any, in Latin letters, with numbers.
- Region - here we select the country in which you live; for the countries of the former CIS, "Russia" is suitable. But you can also indicate your country, if it is on the list.
- The mode is 11bgn mixed.
- Channel width - set to "Auto".
- Channel - we will choose one of the latter, since there may be other routers nearby and it is better that your channels do not match.
- Maximum baud rate (Tx) - leave as default.
Setting up a password for a Wi-Fi network
The WiFi power of this router allows you to pick up the signal within a radius of 300 meters in an open area. In a panel house, the transmission radius is at least one apartment within a radius of the router. This means that if you do not put a password on the Wi-Fi, then all your neighbors will be able to use your Internet, which will lead to a decrease in quality. Therefore, be sure to password-protect your TP-LINK TL-WR841N router. To do this, we need to go to the "Wireless Mode" section -\u003e select the "Wireless Security" item. A page will open, on which we need to put a dot in front of "WPA-PSK / WPA2-PSK", and fill in the fields:
- Version - we leave the default "Automatic"
- Encryption - Leave the default "Automatic"
- PSK password - this is where our WiFi password will be. It must consist of at least 8 letters (in Latin) and numbers. Try to set a password that you can easily remember, or be sure to write it down.
- Group key renewal period - here we put "zero"
- Click on the "Save" button.
After setting the password, the configuration of your router can be considered complete !!!
Who is connected to your WiFi network
Router TP-LINK TL-WR841N can let you see who is connected to your Wi-Fi network. This will allow you to monitor the users of your network to find out if there are extra users. To do this, you need to go to the "Wireless Mode" section -\u003e select the "Wireless Mode Statistics" item. A page will open, which will display a list of mac-addresses of devices connected via WiFi. You can compare it with your devices and identify the enemy. Then, by clicking on the deny button, you disable access to your network for this mac address.
Modern mobile devices have ceased to be exclusively a means of communication, most of them are multifunctional devices capable of connecting to the Internet using the built-in Wi-Fi module. In closed rooms, wireless connection to the global Internet is provided through routers.
TP-Link Wi-Fi routers are a good solution for getting high-speed Internet with a wide range. They are convenient to use and allow you to get rid of unnecessary wires in the house, providing access to the Internet for several mobile devices at once. But for this you need to know about the rules for using the device, it is possible to connect a TP-Link Wi-Fi router yourself, you just need to use our step-by-step instructions. In this article, we will tell you about the correct connection of the router to the PC with subsequent configuration.
How to connect to PC?
After purchasing the TP-Link modem, you need to open the package and check the kit for compliance with the description in the documentation. In addition to the device itself, the box should contain a power supply, cables, software disc and instructions.
After making sure that the device is fully equipped, you should choose a suitable place to install it. In any case, it should be close to the computer, since the LAN cable is short. If necessary, you will have to buy an additional long cord. In principle, this is not a problem, since it is inexpensive and is sold at every electrical and accessories outlet.
It is important to become familiar with the connectors and buttons before connecting the router. There are several of them:
- power button;
- socket for connecting the power cable;
- WAN connector, designed to connect the router to the Internet;
- lAN connectors - there are several of them (mainly 4) and are designed to connect computers via a network cable;
- off / on QSS option button;
- a button designed to reset the settings.
Once you figured out the purpose of the connectors, you should connect one end of the power supply to the router, and the other to the power outlet. The Internet wire provided by the provider is inserted into the WAN socket (i.e., Internet access is provided). Typically, the WAN connector on the device is highlighted in blue. One end of the LAN cable connects to the router (you can use any of the four ports), the other to the corresponding socket on the computer.
Customization
Even if we are dealing with a completely new TP-Link router bought in a store (where it can be tested by the store's employees), experts advise you to first reset the installation to factory settings.
After rebooting, you can proceed to the step-by-step configuration of the router. To do this, you need to open a browser on your personal computer and write the numbers 192.168.0.1 in the address bar. or 192.168.1.1 (selection based on the firmware version) and press "Enter". Next, the "Configuration Wizard" page will open.
First, you need to write the login and password (admin) in the appropriate columns.
It is better to change the password, which will protect the TP-Link router from unwanted use of your Internet by neighbors (especially if you live in an apartment building).
In the case when the provider uses Dynamic IP, or the router is connected via a modem, then after its connection, the Internet on the computer and other devices can work immediately. But in this case, you will have to configure Wai-Fai and install a new secret code.
To do this, you need to enter the tab, System Tools, by clicking on it, and click on Password. In the fields of the old password and login, you need to register admin, and enter the new password and login in the appropriate columns (New Password and User Name). It is not necessary to change the User Name, only the password is important. After entering the new data, you must confirm the actions by clicking on Confirm New Password. Next, to save the updates, click on Save.
As experts advise, on the setup page, you should update the firmware by downloading the latest version. This is done through System Tools, by clicking on it, we go to Firmware Upgrade. Next → “Browse” → open the downloaded firmware file for the TP-Link router you are using, downloaded from tp-linkru.com. Then you need to go to Upgrade. Note that the licensed firmware can be downloaded for free only from official sources.
The next step is to configure the Internet in the TP-Link router. This is done using the Network and WAN tabs. First, you should select the type of network, information about this can be obtained using the Hot-line provider, whose Internet you are using. Selecting the type of network requires saving (click on Save).
Wi-Fi network setup
To start setting up Wi-Fi, go to the Wireless tab. We register the name of the network in the Wireless Network Name column. Additionally, in the column below, you can enter the country. All changes made must be saved by clicking on the Save button.
To protect your wireless connection from someone else's access, you need to go to the Wireless Security system and come up with a difficult, but memorable secret word for you, enter it in the PSK Password field. After saving all the changes, the device should be rebooted by clicking the Reboot button in the System Tools. This action, like the others, requires confirmation.
And so, connecting a TP-Link Wi-Fi router consists of the following basic steps:
- Entering the "Settings Wizard" tab;
- Change Password;
- Firmware update;
- Network selection;
- Wi-Fi setting;
Perhaps video instructions are more convenient for you:
After completing all the above steps, you can easily configure the router yourself, thereby saving time and money for the services of a wizard.
Instructions
In fact, all TP-Link models have similar parameters and connections, so this one will help you set up a TP-Link WiFi router with any number, for example, WR841n or WR740n. First, make sure that you have a configured wired DSL connection to the Internet (a power cord is pulled into the apartment, and you have a login and password for connection issued by the provider). Unpack the router: the set must include a short double power cord, a cable for connecting to an outlet, and instructions.
Plug the router into a power outlet and press the start button, and the indicators on the front should light up. Plug your primary DSL cable into the router's WAN port (usually on the edge and outlined in blue or another frame). Connect the short power cord from the kit to any of the four LAN connectors at one end, and insert the other into the network connector of your computer or laptop.
Now, to enter the device parameters and configure the TP-Link WiFi router, open any installed Internet browser (for example, Internet Explorer), enter the address 192.168.0.1 or 192.168.1.1 in the address bar. You can find out which one is working from the instructions included with your TP-Link router model. If none of the specified addresses are suitable (when you press Enter, nothing opens), reset the current device settings by holding the Reset button for a few seconds (or inserting a needle into the corresponding hole, depending on the model). After entering the appropriate address in the browser, the router settings menu should open.
Set up the basic network connection of the router. Go to the Network settings section and specify the type of your home network (for example PPoE). You can see it in the agreement with the provider or call the support service. Also, the provider must provide such data as the presence of a dynamic or static IP address, server name, IP submasks and DNS. Enter your username and password for a wired Internet connection, select Connect Automatically and save the settings. Now, when you boot up and have a connected router, your computer or laptop will automatically connect to the Internet.
All that remains is to configure the TP-Link Wi-Fi router to have a home wireless connection to the network. Go to the Wireless section. Enter the desired name for the Wi-Fi connection and set any password convenient for you, saving the settings. Now try searching for available wireless connections or your smartphone. The connection you created should be among those found. Select it, enter the password and check the Internet functionality by opening any site in the browser.
The widespread use of laptops, netbooks and other devices capable of accessing the Internet using Wi-Fi wireless data transmission technology, the era of wired Internet is gradually coming to an end. Many homes already have routers - devices that create miniature Wi-Fi hotspots. Naturally, one installation router the apartment is not enough to create a wireless network. You must also be able to properly configure modes his work and other parameters.
You will need
- Wi-Fi router
- Network cable
Instructions
Connect the router to the cable -connection provided to you, the Internet or WAN port. Insert a network cable into any free LAN slot, and connect the other end to your computer or. In the address bar of your browser, write http://192.168.0.1... The settings window will open in front of you. Select the item related to the Internet connection and enter all the data required by your ISP.
Open the item responsible for the wireless network settings. Specify the following parameters:
- Network name (SSID) and password.
- the required data encryption option. Save the settings and reboot the router. Sometimes it takes 15-20 seconds full.
Hello everyone! Did you know that connecting and configuring a network on a router scares even experienced computer users. Why set up yourself if you can call a specialist who will quickly do everything.
However, I will tell you that you do not need to suffer yourself, the process of configuring and connecting TP-link router models is quite simple, especially if you follow these steps according to my instructions. In today's article, a step-by-step explanation will allow you to configure and distribute the Internet to all devices in literally an hour. Yes, and you shouldn't spend extra money to call a specialist, when you can easily and quickly set up a tp link router yourself.
Explanation: the manual is suitable for modern TP-link models (not older than 5 years). The settings menu may differ slightly, but you will find the same items. So let's go ...
How to set up a tp link router preface
Before proceeding to configuring the router, you need to understand the network settings for connecting to the Internet on your computer. Let's say a cable is connected to a laptop or PC. Today, the following network settings are most commonly used:
— PPPoE - users can use the Internet only after entering their login and password;
--- Dynamic IP - the system automatically sets parameters of this type, they are issued via DHCP;
--- Static IP - this option is used extremely rarely today, since the user needs to manually enter the parameters.
As for the operating system, the process is similar on Windows Vista, 7, 8 and even on Windows 10. We need to go to the menu “ Start"And find the tab" Control Panel"- go to" Network and Sharing Center».
Now go to the " Change adapter settings».
Select active " LAN connection»(The icon should be blue). Right-click and select the item " Properties».
Don't be intimidated by the large number of items and settings. Usually, many users, when they see a large number of configuration steps, panic and do not know how to configure a tp link router. There is nothing difficult. We need to select in the window " Internet Protocol version 4", And then click on the button" Properties».
There are two options here:
1. If the mode of obtaining the IP address is automatic in the settings, then it will be easy for you to connect the router and set the parameters, because the settings will come automatically via DHCP (this is the Dynamic IP option).
2. If you see filled items in the window and an active inscription “ Use the following IP address", Then overwrite all settings. You have selected the static settings of the provider that do not change - this is Static IP. We put a tick in front of the item " Obtain an IP address automatically"And confirm our action by clicking on the button" OK».
Blocking access to the Internet by MAC address
This item applies only to those users whose provider automatically blocks new connections. You can find out for sure this information in the contract. To get around this moment, we need to make sure that the router receives the same MAC address that is registered with the provider. Finding the MAC address is pretty simple.
We go to the menu and in the search line enter the command “ CMD"And press the" Enter "button.
After that, a command console will appear in front of you. We need to enter the command ipconfig / all and confirm your action by clicking on the " Enter».
You will see a list of all possible parameters, but we need data from the section " Ethernet adapter - local area connection". In more detail how to find out the mac address and what it is, you will learn from this article:
How to set up a tp-link router: Detailed connection
So, you can proceed to setting up, check that the following elements are at hand:
AND - TP-Link router - the basis that will distribute the Internet to all kinds of devices;
B - provider cable;
C - laptop or personal computer.
Connection is simple - you can see it in the diagram. We plug the cable from the power supply that comes with the router into the connector called Power. We plug the cable of your provider into the main WAN connector of the router, usually it is highlighted in blue. The computer will connect to the TP-link router using a network cable that connects to any yellow LAN port.
Done, other devices (tablets, phones, TVs, laptops) can be connected via Wi-Fi. It's time to move on to the next point of our today's question - how to set up a tp link router.
The process of configuring the tp-link router
The setup begins by logging into the Internet Explorer browser. Enter the following address in the input line: 192.168.1.1 ... If you have once installed a proxy server, then you need to disable it. After entering the address, a security window will appear in front of you: login - admin, password - admin... By the way, on the bottom of the router itself you will find your username and password, look, do not be lazy!
A router window will appear in front of you. We need to choose a master " Quick Setup"(Quick setup) and press" Next" (Further).
Dynamic IP manual - automatic settings.
If your provider provides just such settings, then put a tick in front of Dynamic IP and press the "Next" button.
Now we set the basic settings:
- In field SSID the name of the future Wi-Fi connection point is set.
- Section Wireless Security responsible for the type of encryption - specify WPA-PSK.
- In field Password you must enter a password.
The rest of the settings in this window can be left untouched. Click " Next". The installer will inform us that the settings have taken effect. Click on " Finish»And use Wi-Fi from all devices.
Explanation for users for whom the provider blocks access by the MAC address: go to the router menu again and select the item “ Network", And then -" MAC clone". We drive in the characters we have written into the corresponding field. If you see that in the field " You PC's MAC"There is already data, then just click" Clone MAC". Do not forget to save the settings by clicking on the " Save". I also suggest you find out how to set up a tp link router with static parameters.
Instruction for Static IP - static parameters
At the beginning of the instructions, we determined what network settings are on your computer. And if you have Static IP, then select the appropriate item in the TP-link customizer.
The settings correspond to the data from the local network connection, so there should be no problems, but if the installer is in English, then you may not understand some terms:
Default gateway - main gate;
Primary DNS - preferred DNS server;
Secondary DNS - an alternative DNS server;
Subnet mask - Subnet mask.
After completing the data entry, click " Next».
Next are the standard settings. In chapter " Wireless Security"You need to select the type of encryption - put a tick in front of" WPA-PSK". Field SSID is for entering the name of the wireless network. Do not forget to put the password in the field PSK Password (at least 8 characters).
Done, the installer informs us that for the settings to take effect, you need to restart the router - click on the " Reboot". If you have problems with the MAC address, then use the instructions above - it works for all types of connection.
Instructions for PPOE - logging into the network using login and password
If you have the PPPoE protocol set, then put a tick in front of the item with the corresponding name.
Here, the setup is no different from other connection options. We drive in a password to protect our wireless network from "uninvited guests" - it must be at least 8 characters. In field Wireless Security you need to put the option “ WPA-PSK". As for the field SSIDthen it is for the name of your network.
Done, setup was successful. Click on the button " Reboot»- after reboot, the settings will take effect and you will be able to connect to the wireless network. So, we have examined how to configure a tp link router if your provider uses automatic or static parameters.
I suggest you take care of the security of your Internet. I can recommend you to read my articles:
Setting up security for your wireless network
The password does not guarantee that third-party people will not be able to use your Internet. They can just go into the settings of the router itself and see your password. To prevent this from happening, go to the router configuration program and drive in the following parameters:
Old User Name - enter in the admin column
Old Password - this is the old password, by default we have set admin - we enter it
New User Name - this does not affect safety, so you can leave the same
New Password - we drive in a new password to configure the router (not to connect to it).
Confirm New Password - enter the new password again for confirmation.
Connecting to a wireless network
We have created a wireless network, but users may have a question about connecting to it. I will explain this process using a laptop as an example. On phones, tablets and TVs, the process is exactly the same.
In the lower right corner, click on the wireless networks icon.
The router will ask you for a password - enter it and press the button " Connection».
Important!!!: Enter the password that was specified in the field PSK Password... Sometimes users get confused and enter the password for editing the router settings. If the data was entered correctly, then you should have wireless Internet. The password will be automatically saved, so you don't have to re-enter it every time.
I attach a video to this article, which clearly and clearly shows how to configure a tp-link router
At the end of today's article on how to set up a tp link router, I suggest you familiarize yourself with the most common problems when setting up a router.
1. If you forgot your password
The problem can be solved very simply. We take a router in our hands and find a small button with the name "RESET" behind. We hold it for 10 seconds, after which the router will return to the factory settings. Go back to Internet Explorer and enter the address 192.168.1.1, login - admin, password - admin. After that, you can configure access again and specify a password that suits you.
2. Problems with the connection and operation of the router
Some problems that may arise when trying to connect to a router can be solved by yourself. Sometimes the reason for the lack of connection is a mechanical failure of the gadget.
3. I can't go to the address to configure the router
This problem is common among TP-link users. To get rid of it, you need to follow these steps.
First of all, you need to check what is set in the wireless settings. If DNS and IP-address should be set automatically, and your checkboxes are unchecked, then check them again. After that, you can go to the address again and configure the router.
4. I can't connect to the router
Sometimes a router will prevent a certain device from connecting to a wireless network. To find out what the problem is, you need to try to connect from another gadget - a computer, tablet, or smartphone. If the router does not accept all devices, then try restarting it. After that, everything should return to its place.
If we are talking about a separate device, then the problem is most likely in it. Check if the corresponding checkboxes are checked in the Wi-Fi connection settings. Sometimes the gadget perceives your network as unsecured, so it prevents you from connecting to it. Set the parameters to allow connections to unrecognized wireless networks.
Sometimes a full factory reset helps. To do this, you must hold down the RESET button for about 10 seconds (located on the back of the router). After this action, the chance of good work will increase significantly. The main thing is not to forget to drive in new parameters.
5. The device does not see the network
Unfortunately, there are many reasons for this problem, so you need to go through all of them. If the laptop does not find the network, then first of all it is worth checking if the Wi-Fi module is running. To do this, go to the Network Control Center, then click on the "Adapter Settings" tab. If the wireless connection is inactive (gray), then it should be turned on. Most likely, after this step you will be able to connect to the network safely. We also recommend checking the hardware switch for starting and disabling the Wi-Fi module.
If the module is running and everything is turned on, then it is worth checking the drivers. This applies primarily to laptops. The operating system does not always have the correct network drivers for a particular laptop model. It is very simple to check this guess: right-click on the “my computer” icon, select “ Properties"And go to the" device Manager».
The screenshot shows a list of network devices. In this case, they are all serviceable and have the correct driver package. You can see a yellow triangle opposite the network icon, which explains that the device is not working properly.
The problem can be solved simply: go to the website of your laptop manufacturer, find your model and download the network drivers. Then you will be able to connect to the wireless network.
6. The problem is in the device
Sometimes it is impossible to detect a defect for the reason that the malfunction lies in the device itself. Therefore, you should not rack your brains over the question: how to set up a tp-link router if I followed all the above requirements and everything was successfully configured. In this case, it is necessary to take the router to the service center under warranty (if any).
The defect can be mechanical or software. If everything is clear with the mechanical, then a software defect implies a malfunction in the router's firmware. You can restore it yourself, but this process is much more difficult than setting up. Also, incorrect installation of the firmware or a failure can completely disable the router completely.
So, already summing up today's article, I would like to tell you that you cannot always connect to the Internet because of a router. There may be some network problem. To test this, disconnect the ISP cable from the router and connect it directly to your computer. Then go to the Network and Sharing Center. Turn on your local network connection and try to access the Internet.
If it works, then the problem is really with the router. Sometimes a device will not allow a specific device to connect. To remedy the situation, you can try pressing the button on the automatic router, which is located on the back of the router. All active devices with enabled Wi-Fi modules will connect automatically.
Well, for today, as it were, everything that I wanted to tell you today in terms of: how to set up a tp-link router. I hope the article was interesting for you. I would be glad if you have something to add to all of the above. See you at . Bye bye everyone!
