How to enter Recovery? Many Android upgrade and firmware instructions require you to perform actions from the Recovery menu. What this mode is and what it is for, you will learn from this article. What is Recovery? Recovery is a special Android boot mode in which:
- perform a full Android data reset
- flashing a smartphone
- get Root rights
How to enter Recovery? The Recovery menu is usually found in all smartphones and tablets from Samsung, but absent in other Android brands smartphones, but it can be easily added by flashing this section to your Android device.
If the Android smartphone has a Recovery menu and has not changed it, then it is called STOCK, but if there was no or third-party Recovery menu installed, it will be called CUSTOM.
There are basically two types of custom recovery CWM and TWRP, less common 4ext, Philz CWM, (different development teams).
How to enter Recovery
ATTENTION! If the Recovery menu is absent or not installed, then it is IMPOSSIBLE to enter it!
Method for Samsung
Before transferring your smartphone or tablet to recovery, disconnect Samsung from the charger or USB cable!
New models
Turn off Android and hold down Centralbutton + button Volume Up + button On off
Turn off Android and hold down the Center button + Volume Up button + On / Off button 
in a universal way (read below).
For Samsung Galaxy S8 - S9
- Press and hold the dedicated Bixby button and Volume Up + Power
- After the splash screen appears on the screen, lower the power button, but continue to hold the Bixby button and Volume Up
- Hold these buttons until the Android logo appears on a blue background
- Release the buttons
- After a few seconds, the Galaxy S8 will boot into Recovery Mode.
Older models and some tablets
- Turn off Android and hold down Central button and button On off
- Turn off Android and hold down the button Volume Up and the button On off
or in a universal way (read below).
Method for HTC
Switch to bootloader mode, then:
If suddenly it doesn't work out, use in a universal way (read below).
Method for Google Pixel and Nexus
Turn off Pixel / Nexus and hold down the buttons Volume DOWN + ON / OFF
In the menu, use the volume keys to find the Recovery menu and confirm the selection with the ON / OFF button: 
If suddenly it doesn't work out, use in a universal way (read below).
Method for SONY
Turn off, turn on and when to appear on the screen logo Sony or when the indicator will light up — Pinch / Press (possible options):
- Volume DOWN
- Volume Up
- Click on the logo
- Or turn off Sony, hold down the "Power" button, wait for a couple of vibrations, release the power button and hold down the "Volume Up" button
in a universal way (read below).
For select Motorola and Lenovo models
- Turn off Android
- Press simultaneously the buttons "Volume up" + "Volume down" + "Power"
For other versions of Motorola and Lenovo - turn off Android and hold down "Volume down" + "Power"
If you can't use in a universal way (read below).
A universal way for all Android devices using a PC and ADB tools
(Asus, HTC, Lenovo, Sony, HTC, LG, Samsung, Motorola and others, provided that recovery is available in this device)
Adb Run Program - Method 1
Using the proprietary program of the site Adb Run (do not forget to enable USB Debugging)
Working window ADB RUN From the command line - Method 2
Another option is how to get to the Recovery menu using standard ADB tools and the ADB RUN program:
Connect Android to PC and type the command adb reboot recovery
Example in ADB RUN: 
From the command line - Method 3
As practice shows, on some devices (and more specifically in LG), it is not possible to translate an Android device using the command adb reboot recovery , in this case, you should use the following command
adb shell
reboot recovery
There is also a command to switch to Recovery mode for LG, you need to enter the command
adb reboot --bnr_recovery
After that, the device will start to reboot in a few seconds!
A universal method from an installed terminal with Root rights
(Asus, HTC, Lenovo, Sony, HTC, LG, Samsung and others, provided that recovery is available in this device)
- Download and install the Terminal application from the Google Play store;
- Go to the newly installed application;
- Type the following commands:
su
reboot recovery - After a couple of seconds, Android will start to reboot.
Recovery menu controls
Volume keys Up and down - navigate through the menu Key On off - selection of an item in the menu. There are some Android devices in which no keyvolume,in this case you will need OTG cable and a computer mouse. Once you start putting Android into Recovery mode, plug in your mouse.
This concludes the article. If you do not know how to use and what items in Recovery are responsible for, then read the article
- If errors occurred while installing the update - Status CWM
That's all! Nothing complicated! Read more different articles and instructions in the section. Stay with the site, it will be even more interesting further!
The Recovery menu in the Android operating system is a special mode, when launched, you can update the system, reset the default settings of the smartphone, or get administrator rights.
Calling Recovery Menu on Android OS: Video
Enabling Recovery on Android
How to activate the Recovery menu on Android? After all, you cannot get into this menu with the help of the usual inclusion. On mobile devices of different models, this is done in different ways. You need to unplug the device and disconnect the USB cable from it. After that, you will need to simultaneously hold down and hold one of the listed button combinations:- Volume up swing + power button;
- Volume down swing + power button;
- Center key + power button;
- Center key + power button + and volume rocker up.
After switching on, in the menu shown, find the "Recovery" category with the volume rockers, and this menu is selected using the power key. Also, the power key is required to confirm your choice (like the Enter button).
How to restore firmware on Android: Video
The benefits of backup in devices
Many users are often faced with such a phenomenon as the loss of information in a smartphone. So that such unpleasant moments do not darken your life, there is a function called Backup - creating a backup copy of any information. The required data is saved to an external drive. In the event that malware is detected in the smartphone, the user can always use a copy of the saved data. Let's take a look at how to backup Android system via Recovery mode. It must be said right away that the conversation will focus on creating a backup copy of the applications and settings of the Android system itself, since a system that works without delays and freezes is a very important component of regular use.For this we need:
- Get administrator rights (they will give us the ability to manage the advanced capabilities of the smartphone);
- Download Titanium Backup app. It can be installed from Google Play by.
- When installing the program for the first time, you will see a Root access request that you need to “Allow”, and highlighting the “Remember” option will facilitate future installations of such a plan.
Please note: you shouldn't press buttons without knowing their functions. Titanium Backup utility will disable your smartphone if misused.
How to get ROOT rights: Video
Backup Algorithm
What if you need to use a backup?
- In the Titanium Backup application, go to the "Processing" category, and tap on the "Restore" item;
- In the new window, find the "Restore all software with data" section.
How to Hard Reset on Android: Video
Android users are familiar with the concept of recovery - a special mode of device operation, like BIOS or UEFI on desktop computers. Like the latter, the recovery allows you to perform non-systemic manipulations with the device: reflashing, dumping data, making backups, etc. However, not everyone knows how to enter the recovery mode on their device. Today we will try to fill this gap.
There are 3 main methods to enter this mode: keyboard shortcut, download using ADB and third-party applications. Let's consider them in order.
In some devices (for example, Sony of the 2012 model range), there is no stock recovery!
Method 1: keyboard shortcuts
The easiest way. To use it, do the following.
- Turn off your device.
- Further actions depend on which manufacturer your device is. For most devices (e.g. LG, Xiaomi, Asus, Pixel / Nexus and Chinese B-brands), simultaneously holding down one of the volume buttons along with the power button will work. We also mention some non-standard cases.
- Samsung... Hold the buttons "Home"+"Increase the volume"+"Nutrition" and release when recovery starts.
- Sony... Switch on the device. When the Sony logo lights up (for some models, when the notification light turns on), hold down "Volume Down"... If it didn't work - "Volume Up"... On newer models, you need to click on the logo. Also try to turn on, hold down "Nutrition", after vibrations, release and often press the button "Volume Up".
- Lenovo and newest Motorola... Clamp at the same time "Volume plus"+"Volume minus" and "Turning on".
- In recovery, control is performed with the volume buttons to navigate through the menu items and the power button for confirmation.
If none of the above combinations work, try the following methods.
Method 2: ADB
Fast, efficient and does not require a computer or power off the device.
Method 4: Quick Reboot Pro (Root only)
A faster and more convenient alternative to entering a command in the terminal is an application with the same functionality - for example, Quick Reboot Pro. Like the option with terminal commands, this will only work on devices with installed root rights.
The above methods for entering recovery mode are the most common. Due to the policy of Google, the owners and distributors of Android, access to the recovery mode without root rights is possible only in the first two ways described above.
More experienced users of Xiaomi devices running Android already know what Recovery and Fastboot modes are and what they are for. Therefore, this manual is aimed rather at beginners who want to learn a little more about the technical side of the device or have decided on the firmware. So what is it Recovery and Fastboot on Xiaomi, how to turn them on and off?
1. Recovery Mode
Recovery mode, or recovery mode, is a special menu that allows you to perform some actions with your smartphone. There are two types of them: stock and custom.
Stock Recovery
Installed with the official, factory firmware. It is rather scarce in its capabilities. Usually there are only 3 functions: (clearing the Data section) and connecting to Mi-assistant (Connect with MIAssistant).
Custom Recovery or TWRP
This is Recovey from third party developers. It is installed by you yourself, instead of the stock one (sometimes, sellers install non-official firmware, for example from MIUI Pro, and therefore, most likely, you already have a custom Recovery).
It looks completely different. Usually, when loading into it, the language selection menu first appears, in which there is, including English. Actually, you need to choose it, unless, of course, you speak Chinese. The selection might look like this:
Or like this (here we can perform several tests, as well as, immediately get into recovery or fastboot):
Here are the wipes of various sections ( Wipe), and the ability to create a backup ( Backup) of any information on your smartphone (including IMEI), and most importantly, what it is used for most often is the firmware ( Install). And in general, there is still a lot of interesting things. We will not dwell in detail, because this topic is very broad. Perhaps we will make a separate instruction for it.
How to log into Recovery?
This is done very simply:
- Turn off the smartphone
- We hold down the volume up button and power. We hold until the download starts.
Navigation through this menu is performed using the volume keys. Confirmation of the selection - the power button. Custom Recovery also supports touch.
How do I exit Recovery?
- Find the item Reboot, select it and confirm with the power button.
- If, for some reason, the first point did not work, then just hold the power button for a long time.
2. Fastboot mode
Fastboot mode - required to connect your device to a PC for flashing, installing custom Recovery, etc. We can say technical mode for deeper work with a smartphone.
How do I log into Fastboot?
To enter fastboot mode on smartphones Xiaomi, it is necessary:
- Turn off device
- Press the volume down and power button. Wait for the smartphone to vibrate and release them. A rabbit in a hat with earflaps should appear.
How do I exit Fastboot?
- You must hold the power button for 15-20 seconds. The phone will restart and your normal desktop will appear.
We hope this tutorial will help beginners deepen their knowledge of the technical side of a smartphone.
Our site has already told before. Recall that this is the so-called recovery menu, with which the user can, for example, reset all data or reflash his gadget.
There are two types of menu recovery (Recovery Mode): stock and custom. Stock - this very type of Recovery Mode, which is installed by default. When flashing, a custom Recovery Mode can be installed.
And now the fun part. It will be about how to enter the recovery menu. And here an interesting quest can await the user - this mode can be launched in different ways on different devices. How exactly? First, we'll walk you through the generic method and then walk through specific brands of smartphones and tablets.
Universal mode
What is it good for? The one that is relevant for most modern devices.
- Turn off your device by pressing the Power key, then tap on the "Turn off" touch button in the menu.
- After the device is completely turned off, you will need to press the volume down key and the Power key at the same time.
- Or - on the volume up key and the Power key at the same time.
- When the device starts up, the Power key can be released.
This is the most convenient way of all and the easiest to start the specified mode.
How to enter Recovery on Samsung?
For new models: press the volume up key, Power and the center Home key.
For older models, a universal method is used: pressing the volume up or down key, as well as Power.
Google nexus
Volume down key + Power.
This will load Fastboot mode, and from there you can go to Recovery Mode.
Lg
Classic way: volume down key + Power. Note that the volume up and down buttons on LG smartphones may be located on the back.
Xiaomi
Volume up + Power.
Meizu
Volume up + Power.
Please note that Meizu has its own menu with which you can perform a factory reset or update the firmware. This is not really a menu recovery.
Htc
Or volume up + Power:
Or volume down + Power:
Huawei
Volume up + Power.
Or decrease the volume + Power.
Motorola
First, you will need to launch Fastboot Flash Mode, for which click on the Volume Down + Power button.
In the menu that will load on the screen, go to Recovery Mode using the volume down and up keys.
ASUS
The classic version. Or Volume Down + Power:
Or Volume Up + Power:
Sony
There are several ways.
The first one is simple: Volume Up + Power.
The second is a little more complicated: the Power button, then Up, the Sony logo appears and again Up.
Third way: Volume Up + Volume Down + Power.
How to enable Recovery Mode via terminal?
Download the Terminal Emulator application. Run, provide root-rights (required).
Write the reboot recovery command.
The gadget starts up in Recovery Mode.
How do I enable Recovery Mode through my computer?
Install Adb Run, as well as the necessary drivers. Connect the device to the computer, launch the command line on the computer, enter the adb reboot recovery command and press the Enter key.
The Android system has great benefits for users, as this operating system is always open to changes and improvements. The best thing about this is that you can easily tune and optimize your android device to improve speed, extend battery life, or even replace stock software with custom or unofficial software. But in order to do this, you must first carry out additional operations that will provide access to the internal system of the smartphone or tablet. As you will see, each task requires a recovery image; so in this guide, we are going to show you how easy it is to manually enter recovery mode on rooted and non-rooted android phones.
All android smartphones and tablets have a stock recovery image pre-installed on their systems. Stock recovery can be used for numerous operations such as installing applications from an SD card, backing up data, performing maintenance procedures, and so on. But when you are dealing with unofficial methods such as kernels or kernels, stock recovery is useless. In this case, you should replace the stock restore with a custom one, an operation that usually requires root access (although not always).
Custom recovery images have great features and options that can be used by android users trying to customize their phones. Thus, these tools are only useful if you want to perform complex operations on your phone / tablet, otherwise replacing the stock recovery image with a custom one would be pointless. As mentioned, custom recovery should be used when trying to upgrade to beta, unofficial or custom firmware, or when installing custom kernels - after which, you can use your smartphone or tablet to improve speed or to upgrade battery life.
The most commonly used custom recovery images for android are CWM and TWRP, the latter of which is the touch version of the first tool. There are many other recovery apps that can be installed on an android system, but we recommend the above tools for you.
As mentioned above, when trying to install a custom recovery, root access may be required. In this case, you first need to unlock your smartphone / tablet (), then install the application and finally return here and learn how to boot your android device into recovery mode. Keep in mind that rooting your phone will void your warranty and you'll have to roll back to the stock firmware or update with an official Android software release to restore it to its original state.
This guide is suitable for both rooted and locked android smartphones and tablets, which means you can learn how to enter recovery mode without any problems. This method will work on almost all android devices, so this is a one-stop guide. So, whether you need to go into stock recovery or custom recovery (CWM or TWRP) use our instructions and find out how to do it.
As a rule, to enter recovery mode, you must press a combination of buttons on the phone. First, you need to turn off the device, wait a few seconds, and then press the power and volume up buttons simultaneously for a few seconds. After that, the recovery mode should be displayed. If that doesn't work for you, follow the instructions below.
Enter recovery mode on rooted android devices
- This method is as easy as shelling pears. Consists of a small number of steps. Download the Quick Boot app.
- Install this application on your phone or tablet.
- Run the application.
- In the menu, you will see the following items: Recovery, Reboot, Bootloader and Power Off. Select Recovery.
- Your device will now reboot into recovery mode.
Enter recovery mode on a locked (non-rooted) android device
- To complete these steps successfully, you will need access to a computer or laptop.
- You will also need a USB cable.
- The phone must have USB debugging enabled.
- The Android SDK must be installed on the computer.
- Connect your phone to your computer using a USB cable.
- Locate the Fastboot folder on your computer.
- Open a command prompt.
- Type “adb reboot recovery” at the command line on your computer.
- The phone will then enter recovery mode.
Excellent, our training is complete. Now you know how to enter recovery mode on rooted and locked android devices. Now go ahead and use the recovery menu to install custom firmware or perform other complex and powerful operations.
Booting your phone or tablet in recovery mode is a very common action when you need to install a new mod or upload a firmware. Most Android users don't know how to get into Recovery Mode on their device.
We buy a smartphone or tablet computer, use it for a few days, and then look for a good custom firmware, enjoy the gadget again for a few days, and again start looking for the best firmware, and so on. This requires booting the device into recovery mode. There are several popular applications that allow you to enter recovery on Android, and we will try to talk about them.
How to enter Recovery on Android without additional applications
It so happens that it is no longer possible to install the application. For all gadgets on the Android operating system, manual entry to recovery mode is provided. Devices from different manufacturers have different sets of key combinations that must be held down to boot into Recovery Mode.For example, in order to boot into recovery mode on a Samsung Galaxy S 9000 that does not have camera keys, you need press the volume up button + power button + home button (located in the center)... That is, turn off the phone and hold down the "Volume Up" + "Home" button and press "Power" until the screen backlight comes on.
On Motorola Droid X, entering recovery mode is different:
- Turn off the phone.
- Hold the Home button and press the Power button until the Motorola logo appears.
- Release the Power button and continue to hold Home until an exclamation mark appears.
- Release the Home button and press the Search button once.
For other mobile devices, you can try to enter recovery mode as follows:
- Turn off the device.
- Press the Volume Up button and the camera button until the screen lights up.
Meanwhile, there are several popular applications that allow you to enter recovery mode without dancing with a tambourine. Our next chapter is about them.
Applications to enter recovery mode
There are several useful applications that, in addition to various other functions, allow you to enter recovery mode. Unfortunately, these applications are not universal and support certain gadget models. Here's a quick rundown of what an app like this usually does:
- Install- installation of a new system kernel, installation of new firmware and various system programs.
- Restore / Backup - System save and restore, very useful. If you have problems after updating the firmware, you can always roll back the system.
- Wipe / Format - clearing the internal memory (Wipe) or formatting the entire system (Format). Formatting is rarely used, usually it is enough to clear the memory. Another feature of Android is the "Dalvik-cache" and "Cache" system partitions, which are best cleared before flashing a smartphone or tablet. There are also sections "Data" and "Factory Reset", clearing which will remove all installed applications and system settings, and return the OS firmware to its original state. The "System" section contains the firmware itself.
- Mount - the function of creating and deleting partitions, in principle, is practically unnecessary.
So, the first such application is ClockWorkMod Touch Recovery. It looks like this:
The advantages of this application include the touch menu (this does not apply to the regular version CWMwhere there is no touch menu). The ability to control the application using ordinary buttons. This option is very useful if there is a problem with the sensor. You can create a system ext-partition on a flash drive (memory card).
The disadvantages of this program include some complexity of the installation. CWM you may need to install via Mobile ODIN, fastboot or RomManager... There is also one more small drawback. If you want to make a backup, then CWM will save all system data, you cannot choose between the Boot, Data and System partitions. The following useful application is - 4EXT Recovery... It looks like this:
This application can work with an external memory card that can be connected directly from the program. It can also select the desired partition for the backup, and the application will show its size after creation. Through 4EXT Recovery you can remove or add the Cache section. The application also supports archiving most sections to a .TAR archive. Except for Boot and Recovery. Unfortunately, there is no touch mode, only phone or tablet buttons. The last appendix of our article is TWRP Recovery ... The ascetic look is compensated by good functionality.
The program has an intuitive simple interface. Allows you to select partitions for backup and set a name for the backup archive. Allows you to see how much free space is left on the media. TWRP Recovery also knows how to work with an external memory card and supports encryption. Unfortunately, there is no touch mode. That's all, if you have any questions, ask in the comments, indicating the model of your gadget!
Each Android device has a specific mode called Android Recovery. It is used to restore the correct operation of the phone. In it, you can reset all smartphone settings back to factory or originally installed. In addition, this mode is used to flash the phone and obtain Root rights. How to enter the recovery menu on Android, you will learn further from this article.
The methods of getting into the recovery depend on the brand and specific model of your phone. The first thing you want to do is to rummage through the instructions or search for information on the exact model of your phone on the Internet. Here we will indicate several relatively standard ways of how to open the recovery menu for different devices. But first, you need to do something else.
Reinsurance is the first step. Making a backup
Backup - from English "back up" - is the common name for the process of backing up data on your phone. Why do this? If something goes wrong and your data disappears, you can still restore it. What could go wrong? Sometimes flashing the phone or opening access to root rights instead of improving the functioning of the system, on the contrary, "breaks" it. Therefore, if you are interested in how to enter the recovery menu on "Android" in order to further upgrade it, make a backup first.
Most often, this option is hidden in the "General Settings" section. Most likely, you will see "and reset". As you can see, if the phone is working properly, it is not necessary to enter the recovery menu to reset the settings. This can be done in the normal operating mode.
How to enter the recovery menu on Android: basic button combinations
If you need a recovery mode, because your phone refuses to behave well, then, naturally, through the "Settings" we will not be able to reset the state to restore the system. Usually, in order to get into the recovery, the volume buttons and the power button are used.
Their combination depends on the model and brand of your phone. You will most likely need to press the following at the same time:
- "Volume up" and "Power";
- "Volume down" and "Power";
- "Home" (button at the bottom of the screen) and "Power";
- both volume buttons, "Power" and "Home" (obviously, the creators of Samsung assume a very virtuoso use of fingers for the owners of their devices).
What is Android Recovery?
After you entered the recovery, most likely you will see the picture shown in the photo.
This is an example of a standard recovery menu preinstalled on a device. Depending on the model, version of "Android" and the brand of your smartphone, it may look different. You will navigate through this list using the volume keys, and use the power button as a confirmation button. This list contains the following functions:
Custom recovery menus
If you downloaded a special recovery menu to your phone, then it, unlike the preinstalled or "native" one, will be called custom. The main reason for the existence of alternative recovery menus is in the more advanced functionality of custom versions and various additional features, for example, in installing unofficial firmware.
The most popular custom menus are Clockwordmod Recovery and Team Win Recovery Project. If the first one is similar in control to the usual recovery menu - using the volume and power buttons, then when the second is working, the touchscreen remains active. As in the main mode, you control the process by touching buttons on the screen (see photo below). This is undoubtedly useful if the screen works without errors. If the "glitch", due to which you need to enter the recovery, is in the screen, difficulties will arise.
USB debugging: how to enter the recovery menu on Android from a computer?
In order for you to have the opportunity to enter the phone's recovery menu from your PC, do not be too lazy to first find and download a special program to your computer that makes this possible. But even before that, look for the "USB debugging" option in your device settings - you will find it in the section for developers. Then download AdbRun to your PC. And already from it, knowing the commands for the console, you can control some of the functions of the recovery menu.
Now, if suddenly the recovery menu on Android does not open in the usual way on the phone itself, you can connect the device to the computer using a USB cable and control it from there.
We leave beautifully: how to leave the menu
If you entered this mode out of curiosity, and now you are worried about how to exit the recovery menu on "Android" so that it does not lead to irreversible changes in your data, we will dispel your concern.
Quitting is often much easier than entering a menu. In most well-known recovery menus, this item will even be the first on the list - Reboot System Now ("Reboot the system now"). If even this does not work, then you can cheat and do what all users usually do in the first place if the phone "glitches": restart with the power button, remove and reinsert the battery, or in the end just leave the phone to discharge - later it will turn on again in normal operation.
