Follow these steps to install WinPoET from CD. Click on the icon "My Computer" (on the desktop) - "Control Panel" - "Add or Remove Programs". Select the item "Install Windows". Click on the word "Communication". A corresponding window will appear on the screen. Make sure Dial-up Networking and Virtual Private Networking are installed (ticked). Otherwise, install these components and restart your computer. Close all running applications. Run the Setup program from the CD (D: \\ WinPoET \\ Setup), which will start the WinPoET installation. A window will appear asking you to confirm the installation of WinPoET. Click Next - Yes (if you agree with the terms of the license agreement). In the window that appears, select the folder where the program should be installed, click the Next button. Select Yes, I want to restart my computer now, click Finish. After restarting the computer, WinPoET will be installed and the “Establishing Internet Connection” icon will appear on the desktop.
Windows 2000 operating system
To connect to the Internet, you need to install the appropriate software - the WinPoET program, which, together with the installation instructions, can be purchased at the operator's sales centers.
Follow these steps to install WinPoET from CD. Close all running applications. Run the Setup program from the CD (D: \\ WinPoET \\ Setup), which will start the WinPoET installation. A window will appear asking you to confirm the installation of WinPoET. Click Next - Yes (if you agree with the terms of the license agreement). In the window that appears, select the folder where you want to install the program, click the Next button. Select Yes, I want to restart my computer now, click Finish. After restarting the computer, WinPoET will be installed and the “Establishing an Internet Connection” icon will appear on the desktop.
Windows XP operating system
Click the "Start" button, select "Control Panel" - "Network and Internet Connections" - "Network Connections" - "Create a new connection" new Connection "). Click "Next". The following window will appear:
Select "Connect to the Internet", click "Next". Select "Set up my connection manually", click "Next".
Select Connect using a broadband connection that requires a user name and password, click Next.
Enter the username given to you (like [email protected]) and password (*******). Confirm the password again in the “Confirm password” field and click “Next”. For guest access use login [email protected] and mtu password.
Select "Add a shortcut to this connection to your desktop", click "Finish". After that, the Internet Connection icon will appear on the desktop.
Windows Vista operating system
In the "Start" menu, select "Control Panel" - "Network and Internet" - item "View network status and tasks" (If in the "Control Panel" go to the classic view, then you need the item "Network and Sharing Center" .) In the window that opens, in the left column, select "Establish a connection or network", then, in a new window, select "Connect to the Internet".
In the next window, select the connection type - "High Speed \u200b\u200b(with PPPoE)".
Specify in the fields "Username" and "Password" login (of the form ppr [email protected]) and a password for connecting to the Internet. If you are not sure about the correctness of the password you entered, you can check the box next to the item “Display entered characters”. You can also check the box next to the “Remember password” item so that you don't have to type your password every time you connect to the Internet. In the "Connection name" column, if desired, specify the name of the connection you have created, for example STREAM. For guest access use login [email protected] and mtu password.
After filling in all the required fields, click on the "Connect" button. If all the data has been entered correctly, a message will appear stating that you are connected to the Internet.
Windows Seven operating system
From the "Start" menu, select "Control Panel" - "Network and Internet" - "View network status and tasks". (If in the "Control Panel" go to the classic view, then you need the item "Network and Sharing Center".) You will see a window for viewing basic information about the network and connection settings. In the "Change network settings" section, select "Set up a new connection or network". If the Internet connection was created earlier, a window will appear:
Refuse to use the existing connection and click on the "Next" button to continue the configuration. A window will open in front of you:
Select your Internet connection option, in this case "High Speed \u200b\u200b(with PPPoE").
In the window that appears, enter the username of the form [email protected] and an Internet access password. For guest access use login [email protected] and mtu password. For the convenience of entering a password, you can check the box "Display the entered characters", as well as the items "Remember this password" and "Allow other users to use this connection". The connection name can be left as is or changed as desired. Click the "Connect" button.
Macintosh Operating System English
Open System preferences or select the System Preferences icon, go to Network. Click on the PPPoE tab, check the Connect using PPPoE box. Next, in the Service Provider field, enter, for example, stream. In the Account Name field, enter your username to access the Internet (like [email protected]) and password. For guest access use login [email protected] and mtu password. Leave the next field blank. Check Save password and Show PPPoE status in menu bar.
Click the PPPoE Options ... button and uncheck all the checkboxes there, confirm the unchecking by clicking OK.
Click on the Apply Now button. After that, the PPPoE connection icon will appear on the top, in the Menu bar. Click on the icon and select Connect.
The PPPoE connection icon is represented by three gray triangular brackets: when the connection is established, the dots are dark.
Macintosh Rus operating system
Choose Apple Menu\u003e System Preferences\u003e Network. If you do not have a PPPoE link on the right, add a new interface by clicking "+" and selecting PPPoE in the "Interface" list.
In the Service Name field, enter, for example, stream. Click the Create button.
In the Stream tab that appears on the left, fill in the "Account name" fields (the login issued by the provider, like [email protected]) and "Password" (the password received upon connection). Check the box "Remember this password" and click on the "Connect" button.
Today the Internet is so firmly entrenched in our lives that it is impossible to even imagine how we did without it before. Some people use the global network to conduct business correspondence, make purchase and sale transactions, and someone simply communicates with their relatives and friends who live very far away. The Internet has brought a lot of useful things into our lives, it's stupid to deny. But sometimes you need the appropriate connection speed to complete the required tasks. That's when a high-speed connection comes to our rescue.
Nowadays, users have already forgotten what a slow Internet is.
Of course, today few people use the Internet with a low speed of receiving and transmitting data. However, there are those who have just connected to any provider and need to know how to create a high-speed Internet connection in Windows. Let's consider the process of creating a connection using the example of the three most popular versions of "Windows" today. First of all, it is important to note that the settings of the router or router must be set in advance. And the subsequent operations will help you access the existing network.
Windows 7
In the seventh version of Microsoft's operating system, making such a connection is very simple:
- We go to the "Start" menu located on the lower taskbar. We will need to go to the "Control Panel".
- In the "Change network settings" section, start establishing a new connection. Click "Next".
- The computer will ask you how you want to connect. In the three options of choice, we are interested in the first two (wireless and wired). In the second, although it says "high-speed", this does not mean that wireless cannot be. Everything directly depends on the cable installed by the provider and the speed that it provides. Now, according to your connection (Wi-Fi router or straight cable), select the desired connection type.
- In the list of available networks, click on the desired one and, if necessary, enter the password. Done!
Windows 8
Now let's take a look at this process performed within the minimalist version of Windows 8.
- We still launch the "Control Panel".
- In the "Network and Internet" category, there is a special control center, which we need to go to.
- In the "Change network settings" section, start establishing a new connection. Click "Next".
- According to your connection (Wi-Fi router or straight cable), select the desired connection type.
- In the list of available networks, click on the desired one and, if necessary, enter the password.
As you can see, the process is no different from the previous one. Is that the Start menu is no longer in the eighth version of the operating system. Therefore, you have to sweat a little while completing the first step.
Windows 10
In the latest version of Microsoft's OS, the process for creating a high-speed connection is no different from previous ones. After all, it is made in the best traditions of "Windows", while combining a beautiful design. You can safely follow any of the above instructions.
Updated - 2017-01-25
Setting up an Internet connection. You've been thinking for a long time and finally decided that it's time to connect your ADSL modem to your computer and go online. Correctly. Nowhere without the Internet.
Children must develop according to technical progress. Now assignments in schools are related to the Internet. It's not like in our time - they sat and printed out all the letters in the abstracts, and rewrote them a hundred times. Drawings, and those already by hand, almost no one makes. And if you give your child the right direction, he will also make money on the same Internet.
Now I can't even imagine what I would do without Internet access. I have so many interests and friends. Here one day he is gone, and even then I want to climb the wall. So, get a modem (if you do not have cable Internet) and configure it to access the World Wide Web. Not sure how to do this? I'll help you.
So, you've purchased an ADSL modem, plugged it in, downloaded the driver, and don't know what to do next.
Open the menu “ Start »-« Customization »-« Control Panel ».
We select the icon " Network connections ". And we double-click the left mouse button on it.
The window “ Network connections ».
Left in the window Network connections left-click on the inscription “ Creating a new connection "And the next window appears" Master of new connections ».
In the next window, select “ Set up a connection manually "And again press the button" Further ».
In this window, select “ Through a high-speed connection asking for a username and password "And press the button" Further ».
In the next window in the field " Service Provider Name »Write the name of your supplier. In general, what you write here does not matter. It's just that the word will be in the name of your Internet connection icon. Again we press " Further ».
But in the next window you need to be careful.
In field " Username »Write your login, which the provider gave you (if you have it on the card, then take it from it and enter it here).
In field " Password »Naturally register the password you were given. In the window " the confirmation »Write the same password. Do not touch anything else, and feel free to press the button " Further ».
In the new window, check the box " Add connection shortcut to desktop ”, If you don’t want to search for a long and persistent search where the Internet starts from.
We press the button " Done ", And a shortcut appears on your desktop (I have it on the left side and is called" tattelecom "), and the window of the first Internet connection pops up.
Feel free to press the button " Connection "And if you did everything right, you will go to the global network. With which I congratulate you.
If, however, the connection did not happen, then check if your modem is turned on and whether it is connected to the system unit, and then if that did not help, try to follow the entire procedure that we described to you again.
If you have more than one computer at home, but also a laptop, now you can do it for it at the same time.
Hello friends! We continue to understand how to configure the Internet and solve various problems in Windows 10. I have already prepared several useful articles on this topic, I will give links below. Well, in this article we will set up the Internet in Windows 10. Let's talk about setting up a regular network connection, high-speed connection (PPPoE), Wi-Fi networks, and 3G / 4G modems. I think the article will be useful to many. After all, after upgrading to Windows 10, not everyone can immediately figure out where and what to configure and how to do it. And there are times when, after upgrading to Windows 10, the Internet simply does not work. Most likely, you just need to reconfigure the connection.
We know that there are different ways to connect our computer to the internet. In this article I will try to talk about setting up basic connections:
- Setting up a regular Ethernet connection. Connecting the cable directly from the provider to the computer, via a router, or ADSL modem.
- Internet connection via Wi-Fi.
- Internet setup via USB 3G / 4G modem.
Now we will take a closer look at setting up an Internet connection through the connections listed above. You should find out what kind of Internet you have, and you can immediately go to the desired subheading in this article. Let's start with Ethernet - a very popular way to connect to the Internet.
Ethernet: connecting to the Internet in Windows 10 via a network cable (router, modem)
Let's consider the simplest connection first. If your ISP just laid a network cable into your house, and the provider did not provide a username and password to connect to the Internet, then you have a normal Ethernet connection.
In the same way, an Internet connection is configured in Windows 10 via a router, or ADSL modem.
To set up such a connection, just connect a network cable from the provider (router, or ADSL modem) to your computer (laptop), to the network card connector:
If everything is fine with the Ethernet settings on the computer (no one changed them), then the Internet should work immediately (you will understand this by the connection status on the notification panel)... If the Internet does not work via a network cable, the computer simply does not respond to the cable connection, then look. I faced this problem myself.
If the connection appears, but status Limited, or unidentified network, and the Internet does not work, then you need to check the parameters of the Ethernet adapter.
In Windows 10, this is done like this:
Right-click on the Internet connection status on the notification panel and select the item. Next, click in the new window on the item Change adapter settings.
Right click on the adapter Ethernet and choose Properties... Select the item in the list IP version 4 (TCP / IPv4)... If the checkbox next to this item is not checked, then be sure to check it, otherwise the Internet will not work. So we have selected "IP version 4 (TCP / IPv4)" and press the button Properties.
In a new window, check that the automatic settings for obtaining IP and DNS addresses would be set, and click Ok.
The internet should already work. If not, then restart your computer. If you still can't establish a connection, then check the cable connection, whether there are any problems on the provider's side, whether the router is working normally, or the ADSL modem through which you are connecting (if you do not have a direct connection to the provider).
If you are trying to configure an Ethernet connection directly from your ISP, and the Internet does not want to work for you, then ask your ISP if it does a binding by MAC address. If it does, then you need to tell the ISP the MAC address of the computer. He will register it in his settings, and the Internet will work. Few providers use such a binding, but it happens. How to find the MAC address in Windows 10 read.
Everything, we figured out this type of connection, then we have a high-speed connection.
If your Internet provider has laid a cable in your house and provided you with a username, password, and possibly some other data for connecting to the Internet, which you need to set in the computer settings, or a Wi-Fi router, then you need to configure High-speed on Windows 10 connection (PPPoE). What we are going to do now. In fact, this is the same as Ethernet, it just won't work here until we create connections.
If you have an Internet connection through a router and a connection is configured on it (PPPoE, L2TP, PPTP), then you do not need to configure anything on your computer. It is enough to connect the network cable from the router to the computer. I talked about setting up such a connection above.
If you connect the cable directly to the computer, and you have a login and password to connect to the Internet, then you need to create a connection.
We open Network and Sharing Center:
Click on the item. Then, select the item Internet connection, and click on the button Further.
In the next window, select the item: High Speed \u200b\u200b(with PPPoE).
Next, we set the username and password that the Internet provider should provide you. Also, you can set a name for the connection, for example: "Beeline High-Speed \u200b\u200bConnection". And you can also check the boxes next to the items for saving the password, displaying the password and allowing other users to use this connection. I advise you to check the box next to the item Remember this password.
Click on the button To plug, and if everything is connected correctly, and the parameters are set correctly, then a connection will be created and an Internet connection established.
You can see this connection and manage it by clicking on the Internet icon in the notification bar.
Clicking on the connection will open the menu Dialing a numberwhere you can connect, delete, or edit connection settings.
Internet connection via Wi-Fi
If you have a Wi-Fi router installed at home, or you want to connect your laptop to the Internet with friends, in a cafe, etc., then you can use Wi-Fi for this. If you have already installed the driver for the Wi-Fi adapter, and Windows 10 almost always installs it automatically, then all that remains is to open the list of networks available for connection, select the one you need, specify the password (if the network is secure)and you are already connected to the internet.
On this topic, I already wrote a detailed article:. I think there should be no problems with connecting to a wireless network.
Configuring the Internet via 3G / 4G modem in Windows 10
It remains only to consider setting up a connection via USB 3G, or 4G modem. On a Windows 10 computer, setting up such a connection will hardly differ from.
First of all, we need to connect the modem to the computer and install the driver on our modem. The driver can be downloaded from the site of the modem manufacturer, from the site of the Internet provider, or simply find it on the Internet. Search by name and model of your modem. Also, the driver can be on the disk complete with the modem, or on the modem itself. If there is no driver for your modem for the Windows 10 operating system, then try to find it for Windows 8, or even Windows 7. It may work.
After you have installed the driver, connect the modem to your computer, and you can start setting up a 3G connection on Windows 10. By the way, everything is almost the same as when setting up a high-speed connection.
We open Network and Sharing Center.
Click on Creating and configuring a new connection or network and choose Internet connection.
And we set the parameters that the provider provides: number, username and password. I showed it using the example of the Intertelecom provider. I recommend checking the box next to Remember this password. Specify an arbitrary name for the connection. After filling in all the fields, click on the button Create a.
If everything is ok, then a connection will be created and an Internet connection established.
If the connection fails, check all the parameters and the USB modem connection. It may also be that you have very poor coverage from your provider. In such cases, the Internet may not connect at all, or work very slowly. How to see what your signal level is, and how to increase it, I wrote. In some cases, if the network is very bad, it is necessary.
You can start the created connection, stop, delete, or edit it by clicking on the Internet connection icon and selecting the created connection.
Internet connection status is always displayed on the notification panel. By clicking on it, you can disconnect from the Internet, or start the desired connection.
And a few more words
Whichever way you set up the Internet, you may encounter the popular error "Limited"... When the Internet is not working, and next to the connection status there is a yellow exclamation mark. We dealt with this problem in.
The article turned out to be large, but it did not seem confusing. I would like to fully answer the question posed in the title. I hope you found some useful information in this article and connected your Windows 10 computer to the Internet.
You can ask questions in the comments. Read this article carefully before describing your problem. Perhaps the solution has already been written. Also, see links to other articles, there is a lot of useful information on the topic.
