Stand for a mug in the technique of "Decoupage". Master class with step by step photos.
Raisa Ivanovna Bolba, teacher of additional education of the 1st qualification category, MBOU DOD Center for Technical Creativity, Belaya Kalitva.
This master class is intended for children of secondary school age, teachers of additional education, as well as all lovers of needlework.
Purpose: stand for a mug, a gift with your own hands.
Target: production of a coaster for a mug.
Tasks:
- introduce the technique of decorating objects using decoupage;
- improve the skills of working with paint, glue, napkins;
- educate purposefulness, accuracy, artistic taste.
About 20-30 years ago, coasters for mugs took a firm place in the life of almost every person, they began to select the original name for them. The most popular steels were bonfire, coaster and birmat. The name "coirdekel" was borrowed from the German language and in translation means - the lid of a beer mug. In Germany, there were beer mugs that had lids on top. Such mugs cost a lot of money, and in beer shops, beer in these mugs was served only for wealthy people. And ordinary people drank beer from ordinary mugs, on which there was a small circle of felt on top. The Germans put this mug under the mug so that it does not interfere, but at the same time absorbs accidentally spilled beer. Thus, the lid was renamed the mug holder.
Later, various companies began to place their advertisements on coasters for mugs. Travel lovers bring with them from various countries as a souvenir such coasters for mugs with various drawings or inscriptions.
We will make a mug stand from old CDs, old postcards and patterned napkins.
For work we need the following materials:
- CDs,
- old postcards
- patterned napkins,
- white acrylic paint,
- gouache
- nice cord
- pencil,
- scissors,
- hairdryer,
- PVA glue,
- glue "Moment-Crystal".
Work sequence:
For one stand, you need to cut 2 circles from postcards. Colored cardboard is not suitable, because. with repeated application of paint and glue will warp. Postcards have a laminated layer on one side and do not warp when applying paint and glue.
Apply Moment glue to the disk and glue the cardboard circle first on one side, then on the other.
The lower part of the stand can be painted with gouache and varnished, or you can leave it as it is.
So, let's start decorating the stand. Apply paint with a swab, for example, green.
The paint can be dried with a hair dryer. Then apply PVA glue on a dry surface. The thicker the glue, the smaller the cracks on the surface of the stand will be.
We apply white acrylic paint to the slightly dried glue and quickly dry it with a hairdryer. Under a jet of hot air, cracks form in the paint - crackle.
Cut out the motif you like from the napkin. If the napkin is multi-layered, then we use only the top layer with a pattern.
Put a napkin on a stand, drip PVA glue
And smear from the middle to the edges of the motive.
We add a small inscription that will balance the composition.
We cover the mug stand with a layer of thick building PVA. After complete drying, we decorate the end of the stand with a cord, which we glue with Moment-Crystal glue.
Mug holder is ready.
Another stand and crackle fragment:
And here are the options for decorating coasters:
These mug coasters are convenient to use at work during your lunch break.
Good luck to everyone who wants to repeat this master class!
Elena Bad
In the very near future, the most beautiful family holiday is expected in our country - Mother's Day! For everyone who wants to present themselves a great opportunity to thank their dearly beloved mothers for all the sleepless nights, worries, worries that we sometimes manage to deliver to them! None of the blessings of the world are enough to express our gratitude to mothers!
However, there is something that can convey our love and gratitude to you! What is this? This is some small SURPRISE, made with our own hands, containing all our affection for mom, made with love and a lot of positive thoughts!
Surely many of you have accumulated at home a lot of unnecessary disks that only take up shelf space. It is a pity to throw away and what to do with them is also not clear. I decided to bring them to kindergarten and make them for our mothers coasters for cups. Making crafts takes a lot of time. So we got to work early.
Target: teach children to decorate disc in decoupage technique.
Tasks:
1. Contribute to the formation of children's interest in arts and crafts, in particular to decoupage technique.
2. Develop imaginative thinking and fine motor skills.
3. Raise love and respect for mom.
Necessary materials.
1. Disks(CD, DVD)
2. Three-layer napkins with a suitable pattern.
3. Acrylic putty.
4. PVA glue.
5. Acrylic varnish (or clear varnish for interior decoration).
7. Sandpaper.
9. Sponge for washing dishes.
10. Hair dryer (for quick drying).
Getting Started:
To begin with, cut out a circle from white paper and seal the hole in disk.
Let dry (you can use a hair dryer to dry quickly).
Then we cover disk another layer of putty, also let it dry or dry it with a hair dryer and apply the putty a third time.
whole surface We cover the disk with PVA glue.
We take a napkin, separate the two lower layers and put a fragment of the napkin on disk. Gently smooth from the center to the edges so that there are no bubbles. Be very careful - the napkin is thin, wet, easily torn!
When the glue dries, on the end disk we pass with fine sandpaper, thereby cutting off the excess napkin.
Also glue the napkin on the other side of our coasters.
We cover the craft with acrylic varnish on both sides (or clear varnish for interior decoration). Glue a thin cord or braid along the edge.
We got wonderful gifts for our mothers.
We admire a little and give to mothers!
I hope the idea of creating such coasters you will like it!
Related publications:
Decorating a kitchen spatula using decoupage technique. Master class with step by step photo and description.
Dear friends, colleagues! I bring to your attention a children's master - the class "Brush stand". It is very simple in terms of how it is made.
Master class on decorating a computer disk with salt dough crafts Video Master Class. I bring to your attention a master class on decorating a computer disk with salt dough crafts. If you have watched mine.
Good afternoon friends! I decided here the other day to try with the children a wonderful application technique like "decoupage". Everyone says to do it.
Objectives: - to unite the efforts of parents and teachers in raising children - to involve parents in active participation in the life of their child Tasks:.
MASTER CLASS PEACOCK FROM PLASTILINE AND CD DISC Materials: CD, plasticine, threads. 1. Cut off the edge of the disk with scissors. 2. We close up.
You can make a great many original and useful things from unnecessary CDs and DVDs. The author of this idea talks about how you can decorate your kitchen and emphasize its style with the help of coasters for mugs of hot drinks. The fact is that you can decorate coasters with napkins, choosing a color scheme and pattern that matches the theme of your interior in the kitchen. You can also make a set of such coasters as a gift for your loved ones, for this, simply select a picture to decorate the coasters, which will harmoniously fit into their kitchen interior. Such a gift will be appreciated and will always serve as a warm reminder of you.
To bring this author's idea to life, you will need:
1. Old CDs and DVDs that you don't use.
2. Thick corrugated cardboard.
3. Scissors.
4. Napkins for decoupage.
5. Simple pencil.
6. Construction glue PVA.
7. Universal glue.
8. Construction putty.
9. Small spatula.
10. Sandpaper.
11. Alcohol-containing liquid for degreasing.
12. Rags.
13. Acrylic primer.
14. Acrylic glossy varnish.
15. Brushes for applying glue and varnish.
16. Foam sponge.
17. Files or plastic bags.
18. Acrylic paint.
1 step.
To begin with, we take corrugated thick cardboard and circle the previously prepared discs on it with a pencil. Then cut out circles from cardboard with scissors. You can simplify the process a little and, without resorting to a pencil, outline the boundaries of the disk on cardboard with a clerical knife, while the cardboard blanks will immediately turn out to be cut out of cardboard.
2 step.
Now apply a layer of universal glue to the shiny side of the disk.
3 step.
Carefully, trying not to get your fingers dirty with glue, we fold the blanks as follows: a disk with glue (glue up), then a circle cut out of cardboard on top and again a disk smeared with glue (glue down). In the end, it should look something like this:
4 step.
Using the method described above, we glue the required number of blanks, then put them one at a time in a file or bag in order not to accidentally stain anything in the glue. Now you need to place the blanks under the press for several hours.
5 step.
After the glue has dried, we remove the blanks from the files and close the hole in the middle of the disk with putty.
6 step.
We also close up the end sides of the workpiece with putty. Now patiently wait until the putty hardens.
7 step.
After the putty has completely hardened, we process the workpiece with sandpaper. After all the irregularities and roughness are removed with emery, degrease the surface of the workpiece with any alcohol-containing liquid. Then, with light tangential movements, we apply two layers of acrylic primer to the workpiece. Make sure to dry each layer well.
8 step.
Now we decorate the blanks with previously selected napkins with a pattern. To do this, simply glue the napkins with PVA glue onto the blanks. Let the glue dry.
9 step.
After the napkin dries, go over the edge of the workpiece with fine sandpaper. This will help to carefully remove the excess glued napkin.
This is how it should turn out:
10 step.
Now, very carefully, sometimes the end sides of the blanks with acrylic paint. In this case, the author uses brown paint, you can choose the paint that seems more suitable for you.
11 step.
After the paint has dried, cover the coasters under the mugs with acrylic varnish in several layers. Dry each layer thoroughly.
As a result, you get such beautiful coasters that will serve as a decoration for any kitchen.
Thanks to the author for the idea!
The time of CDs has almost passed, many have left a large number of them - musical, with films, cartoons, with outdated computer programs - with images of heroes of fairy tales and films, flowers, graphic pictures on them.
They sparkle and shimmer with all the colors of the rainbow on the one hand, on the other - they have beautiful drawings. A hand does not rise to throw them away - and it is not necessary, you can make a lot of original, beautiful and useful things for the home from them.
In addition, working with them is very simple - they already have the correct circle shape, which in some crafts will only need to be slightly changed in order to give the future product or decoration the desired look. At the same time, they are easily cut with ordinary clerical scissors and glued to the surface of almost any material.
It happens that some home interior items have lost their appearance, there is no way to replace them with new ones, or it’s just a pity to throw away an old favorite thing that has served faithfully for many years. Discs will help give things a new life.
For example, they can decorate an old mirror, making an original frame sparkling and shimmering in the rays of sunlight from a window or in the light of an electric lamp with all the colors of the rainbow from pieces of various shapes and sizes.
You can make a beautiful frame for a photo, decorate the edges of the cabinet drawers with a mosaic of pieces of disks.
Frame for mirror or photo
You will need a lot of disks, scissors, paints, glue, thick cardboard, colorless transparent varnish.
First you need to cut out a frame from cardboard in the shape and size of a mirror or photo. Then cut the disks into pieces of different shapes - squares, irregular quadrangles, rhombuses, triangles.
Take glue and stick on the frame of the figure so that there is a distance of one to two millimeters between them. As a result, on the frame you will get a mosaic of iridescent geometric shapes.
When the glue dries, and the figures cut out from the disk stick well, you need to carefully and carefully go through the joints of the figures with black ink or paint. After that, the frame is covered with a transparent varnish, allowed to dry and mounted on a wall with a mirror or photograph.
Mirror frames made of discs look mysterious and original.
If the apartment has interior doors with glass, the glass can also be laid out with a mosaic of disks. In this case, the joints between the pieces do not need to be painted, but simply covered with transparent varnish, then there will be a feeling of light and space.
Disk watch
An option is to purchase a clock mechanism with arrows or remove it from an old clock, lay clocks of any configuration on the wall with disks, gluing them to the wall, and strengthen the clock mechanism in the middle.
Wall decoration with discs
On the wall in the room or in the kitchen, you can lay out an interesting composition from disks with beautiful pictures, selected by theme. And you can use them to create your own picture.
To do this, you need to take the discs and paint their shiny side with black ink, when the ink dries, outline the lines of the future image along it, and then go through them with something sharp - a thick needle, a special scraper or a sharp knife with a thin blade and a sharp tip.
Iridescent lines on a black background will look very beautiful - you can draw anything you like: unusual birds, flowers, an abstract drawing. And hang the discs on the wall in random order.
Kitchen decoration discs
In the kitchen, disks can make an unusual “apron” in the desktop area. It will look extremely original, and in terms of working properties, the discs will not yield to tiles - they are just as easy to wash from splashes of fat and juice of vegetables and fruits.
The principle of working with them is the same as with frames for mirrors and photographs - just stick it on the wall.
At least for the room, at least for the kitchen - you can make a mosaic panel from disks by gluing pieces of the desired shape and color onto cardboard, and then covering the composition with transparent varnish.
Disk household items
The discs will make an excellent stand for hot. In this case, the disk will play the role of a base, you need to put a nice cover made of fabric on it, and the stand is ready.
It will be original to update the tabletop of a coffee table with sliced \u200b\u200bdiscs. To do this, cut them, fix them on the countertop with a plasticizer in random order or make a pattern out of the pieces, and then fill the countertop with a thin layer of transparent varnish, making it even.
The cover will be durable. The tabletop will sparkle and shimmer beautifully.
From two disks and a thick tree branch, you can make a holder for women's earrings.
The core of the rack is made from a smoothly processed branch, turned to the diameter of the hole in the center of the disks, one disk will be the base, the second shelf, make holes in it and insert the earrings into them.
How to decorate a suburban area with discs
Creativity and imagination - space. For example, you can make a flower bed out of old car tires and rims by decorating the outer surface of the tires with a mosaic of shiny pieces.
Or you can cut a peacock out of a rubber tire, and make the tail out of whole round discs - for this you need to glue them in pairs with their shiny sides out, and then make them into a large triangle-tail, gluing the overlapped blanks in pairs.
On a dacha fence made of discs, you can depict a huge iridescent caterpillar. You can paint the disks under a ladybug - red paint, make black spots and draw a head, and plant them on fruit bushes and trees.
Christmas decorations from discs
Due to the fact that the discs in the rays of light shimmer with all the colors of the rainbow, beautiful snowflakes will come out of them for the New Year holiday - they are easily cut with scissors, you can cut out the most intricate pattern. You can hang snowflakes on the Christmas tree and on the walls.
You can cut the disks into small pieces, thickly paste over an ordinary ball with them and hang it from the ceiling on a thread - it will rotate and sparkle, reflecting the lights of New Year's garlands.
The application can be very different. From disks, you can make an interior curtain in the likeness of bamboo - collect disks on long threads. They can make an ultra-modern necklace, a fridge magnet, a vase, a candlestick, a holder for ballpoint pens and pencils, a box, they can even decorate a summer bag.
Unnecessary CDs are an excellent material for creativity, a means to spend leisure time - making certain gizmos from them, and the ability to decorate a house or cottage in an original and unusual way without spending a lot of money.
Photo ideas for fakes from disks
