In the process of using laptops from different manufacturers, users often encounter various problems and errors. Safe mode allows you to load only the necessary components or restore a previous system state. The article will talk about how to start a laptop from Lenovo in Safe Mode.

How do I enable Safe Mode?

The process of entering the boot mode selection menu is different on different operating systems, so it will be appropriate to list all the methods.

Windows 7, XP.

At the time of turning on the Lenovo laptop system, you need to press the "F8" key. Next, a special menu should appear on the screen. You can choose any of the suggested modes and start downloading.

Windows 8, 10.

When turning on the system, you must press the "F8" button or use the combination "Shift + F8". A menu with a choice of boot options will appear on the screen. This option should be used only if there are problems with the computer and cannot get to the Lenovo laptop desktop.

Another way is to use the msconfig utility. You need to go to its interface and select the "Download" tab. Next, in the "Boot Options" field, check the "Safe Boot" and "Minimum" items. After saving the changes to the settings, a window will appear prompting you to restart your Lenovo laptop. It is worth noting that the system will always start in safe mode, so after fixing system problems, you must disable the option in msconfig.

On Windows 10, the F8 key method does not work. You need to use the msconfig utility.

Outcome

It's easy to enable Safe Mode on a laptop, so you can start it at any time and try to fix errors in the device.

Any Windows computer can be started in Safe Mode. In this mode, only the most basic components of the operating system are loaded. This allows the computer to start even in the event of severe software conflicts or problems. From safe mode, you can remove programs that block the operation of the operating system or cannot be removed during normal operation.

If you are having problems and you need to start your computer in safe mode, then this material should help you. Here you can learn how to do this in the Windows 7 operating system, as well as newer Windows 8 and.

How to start your computer in Safe Mode (Windows XP or Windows 7)

If you are using Windows XP or, then it will be quite easy to start your computer in Safe Mode. To do this, you need to restart your computer (if the computer is turned off, then just turn it on) and at the moment the computer starts booting, press the F8 key on the keyboard. Press the F8 key until a list of ways to boot Windows appears on the computer screen.

In this list, we are only interested in the first three items. Let's consider them in more detail:

• Safe mode - standard safe mode. In this mode, the computer will start up using only the essentials. In most cases, this is the safe mode option that is used.
• Safe mode with loading network drivers - safe mode similar to the previous one, but with loading network drivers. When loading in this mode, you will be able to work with the local network and the Internet.
• Safe mode with command line support - safe mode without GUI. After loading in this mode, a command line appears on the screen, with which you can interact with the system.

Please note that the F8 key must be pressed immediately after starting the computer. If you are a little late, then the list of boot methods will not appear and the computer will start normally.

How to start your computer in Safe Mode (Windows 8 and Windows 10)

If you are using Windows 8 or, then you will not be able to start your computer in Safe Mode using the above method. The computer simply won't respond to the F8 key. In this case, you need to start safe mode using the MSCONFIG command or using the Windows boot disk. We'll look at both of these options below.

Option number 1. Start the computer in safe mode using the MSCONFIG command.

If your computer is in working order, then you can use the MSCONFIG command. Press the Windows-R key combination and enter the MSCONFIG command in the window that appears.

After that, a window with the name "System Configuration" will open in front of you. In this window, you need to go to the "Download" tab and put a checkmark opposite the "Safe Mode" item.

Then close the window by clicking on the "OK" button and restart the computer. The next time you boot your computer, Safe Mode should start. In order for the computer to boot up in normal mode again, you need to go to MSCONFIG again and uncheck the box.

In principle, this option for starting a computer in safe mode works in both Windows XP and Windows 7. However, it is not as convenient to use it as starting via the F8 key.

Option number 2. Start your computer in safe mode using a bootable Windows disk.

The second option is to start Safe Mode using a Windows boot disk. This option will be useful if your computer does not start at all and it is not possible to use the MSCONFIG command.

For this download option, you need with the version of Windows that is installed on your computer. If it's Windows 8, then you need a boot disk with Windows 8, if it's Windows 10, then Windows 10.

Insert the Windows boot disk and boot from it. At the very beginning, you will see a window with a choice of language. Here we just click on the "Next" button.

And open the subsection "Additional parameters".

After that we open the command line.

As a result, it should appear in front of you. In this line you need to enter the command " bcdedit / set (globalsettings) advancedoptions true". After entering this command, simply close the command line by clicking on the button with a red cross.

After closing the command line, the Select Action menu appears. Here we select the "Continue" option.

After that, the computer should restart. After rebooting, we boot the computer in normal mode (not from the boot disk). As a result, when you start your computer, a list of ways to boot Windows will appear on the screen, with which you can start Safe Mode.

It should be noted that now, every time you start your computer, a list of boot methods will appear. In order to disable it, you need to boot from the disk again, go to the command line and execute the command “ bcdedit / deletevalue (globalsettings) advancedoptions».

How to boot a laptop into Safe Mode

How to boot a laptop in Safe Mode: via the command line, the corresponding key? The choice of method is determined by the existing situation. The one that required the user to perform some actions in a safe environment.

The information may differ due to a different OS or laptop brand, respectively, instead of the F8 button, there may be F12 and vice versa. But there is a universal method that always works. It is popular enough, 100% effective, but fraught with possible registry errors. It is about him that will be discussed further.

How to Boot Your Laptop in Safe Mode: Emergency Shutdown

To do this, you must turn on the laptop and wait until it is fully loaded. After that, turn off the laptop by holding the power button for a long time (there will be no habitual shutdown). Yes, he will agree that the method is radical, it is possible, but immediately after trying to turn it on, a list of commands will open before the user, one of which is to start safe mode.

Safe mode via F8 or F12

This is a simple method boot laptop in safe mode... It is enough, immediately after the power button, to continuously press one of the keys: F8; F12. It all depends on the laptop model and its manufacturer. You can figure out this difference in a couple of minutes. Subject to the wrong choice, the system will continue to boot. You can also press and hold the power button without waiting. Therefore, repeat the action, but with a different key. The selection of the type of safe mode is similar to the above.

Running through the command line

The method will be considered in relation to Windows 10 and 8, since the other versions are no longer supported. On the 10-ke, you need to do the following:

• Click on the checkbox in the lower left corner.
• Select parameters via the side menu.
• Select update center, security.
• Recovery -\u003e Special Boot Options -\u003e Restart Now.
• Troubleshooting.
• Other measures.
• Upcoming launch options.

How to enter Windows 8 Safe Mode !?

The safe boot mode of the operating system is an option to load the minimum required number of functions and software.

When logging in from Safe Mode, a label is displayed in the corners of the screen.

This is used to diagnose system problems. The absence of a problem in Safe Mode allows essential services to be excluded from the expected cause.

Also, a large number of problems can be eliminated only from.

There are several possibilities to initiate system startup in this format. For this, both a simple keyboard shortcut and a bootable optical / flash drive are used.

Method # 1: Keyboard shortcut during boot

This option is known to most confident users of early OS versions who know how to enter Safe Mode windows 8 while loading.

It consists of a few quick presses of "F8" before the system boots.

In some cases, you will need to use "Shift + F8". As a result, a screen with a list of boot options should appear.

Using the arrow buttons, select the "Safe Mode" item and confirm the selection with the "Enter" key.

In the latest version of the operating system, this option may not be compatible on all PCs.

If you cannot use the above-mentioned combination of buttons, then you should take the following actions:

After these manipulations, loading can be done using hot keys.

The described method will help answer the question of how to enter windows 8 safe mode on an hp laptop.

Method # 2: OS Configuration Tool

To call the utility for setting the operating system parameters, you need to press "Win + R". This action will open a line of execution in which you need to write "msconfig".

After pressing "Enter" or "OK" the settings window will appear directly. In it you need to open the "Download" tab.

At the bottom of the window, in the Boot Options field, you must select the Safe Boot and Minimal items.

After agreeing with all the above settings, you will be prompted to reboot.

It can be confirmed or postponed. This will allow the computer to apply the settings after the first OS restart.

Note! The system will always boot in safe mode until the user deselects the boot options. After fixing the problems, it is important to remember to return the settings to normal.

Method number 3: Diagnostic tools

If you need to activate the buffer format of a running OS, then it is better to use the following method. To do this, you need the "Options" button on the sidebar.

Then you need to select "Shutdown" and, with the "Shift" button held down, click on the "Restart" item.

These actions will launch a diagnostic screen. On the "Select action" screen, click on "Diagnostics".

In the "Diagnostics" window, you will need to open "Advanced options".

On this screen, select the "Boot Options" item.

A list of conditions in which the OS will boot will be shown here. After familiarization with the parameters, you need to click the "Restart" button.

In the next step, the diagnostic program will provide several boot options. The selection is carried out using the "F1-F9" keys.

The fourth item is required in the list, that is, you need to press F4.

After these manipulations, the computer will boot in safe mode and you can perform the necessary actions.

Some users think: "how to enter windows 8 safe mode through BIOS?"

So this is impossible to do, because the BIOS is not associated with the OS.

There are two ways to enter Safe Mode on classic Acer notebooks and on Aspire series devices. The first method deals with the case when the laptop does not work properly, but still boots. The second is designed for the situation when the system does not start at all, errors and other troubles appear. Let's consider both methods in relation to the Windows 10 operating system.

Method one

If you can boot your Acer laptop, turn it on. Wait for the download to complete, and then enter the word "MSCONFIG" in the search bar for all programs.

Open the found utility. The "System Configuration" window will appear on the monitor, in which you need to go to the "Download" tab.

At the bottom of the window, you need to check the box next to the "Safe Mode" line, save all changes, and then restart the laptop. If you think that your inept actions can harm the device, ask for help in professional setup and repair of laptops, our experts are ready to help you in any situation.

After the performed manipulations, the device will automatically boot into safe mode, as you wanted. As soon as the need for this is exhausted, you will have to open MSCONFIG again and return the "System Configuration" window to its original form.

Method two

If the device does not boot, then you need to find a bootable disk with Windows 10. Make all the settings as before installing the OS. Language parameters do not need to be changed.

In the next window, you need to click on the "System Restore" line, as shown in the photo.

From the Select Action menu, select Diagnostics. Then, in the window that opens, click on the "Advanced options" button, and then select "Command line".

A black window will open. In a specially designated place, you need to enter the command "bcdedit / setadvancedoptions true" and press "Enter". Then close the window and click "Continue".

The device should reboot. Boot the laptop in normal mode (not from disk), and a menu for choosing boot methods will appear on the monitor.

Select the mode you need and get to work. To disable this feature, you need to reboot from disk and enter the value "bcdedit / deletevalueadvancedoptions" in the command line.